Condition: used, capacity 90 degrees: round 260 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 300 x 260 mm dimensions of saw-band 4200 x 34 x 1,1 mm sawing motor 4 kW In our opinion, the machine is in good used condition and can be inspected Bwjbevy Imyj Hamr Uel under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Year of construction: 1986, TECHNICAL DATA: - Maximum planing width: 530 mm - Maximum planing height: 240 mm - Number of knives: 4 - Motor power: 5.5 kW - Electric thicknessing table adjustment - Feed speed: 2 speeds - Infeed roller - Low-pressure bar - 4-knife planer block - Strip planer knives - Outfeed roller - 2 sliding rollers in the table MACHINE DIMENSIONS: - Length: 990 mm - Width: 930 mm - Height: 1080 mm - Weight: approx. 630 kg Bweb Howhf N Tsamr Usl Location: arrives at warehouse in 54634 Bitburg - Available at short notice -

Condition: used, Year of construction: 1978, liter capacity 1000 l weight of the machine ca. 0,3 t dimensions of the machine ca. 2,8*1,5*1 m No. 4406: 1 branded coolant tank with paper band filter Made by BEDA, Bsbetqp H De Hamr Uswl type 1040 year of construction 1978 approx. 1000 l volume Dimensions approx. 2750 x 1450 x 1000 mm, weight approx. 300 kg

Condition: used, Year of construction: 1972, turning length 2000 mm turning speeds 1400 U/min centre height 315 mm turning diameter 630 mm Bwob Haouap Uasmr Uol Including accessories (see pictures). The machine is in very good condition and has been well maintained. Only the rapid traverse should be checked.

Condition: used, Year of construction: 2012, max. workpiece length 4500 mm profile spindle 3 Stück main drive 20/30 kW Dimensions (length / width) 16500 x 6500 mm Weinig Conturex 2 / 124 ----- Working width: 40-260 mm Working height: 25-150 mm 2 x PowerGrip clamp table 2 x 2280 mm ----- Clear dimension length without repositioning cycle and 90 degree machining 175- 2700 mm Workpiece length with repositioning cycle 2700 - 3500 mm Workpiece length with multiple repositioning cycles 3500 - 4500 mm Main spindle 1: ----- Motor with brake 20 kW S1/ 30 kW S 6 HSK 63F Speed ??electronically adjustable 0-18,000 rpm Max. tool length from flat support HSK 63 F: 280 mm With C-axis Tool magazine: ----- Number of places: 24 mm Distance between places: 100 mm Weight per place 10 kg Total weight in the magazine: 240 kg Main spindle 2: ----- Motor with brake 20 kW S1/ 30 kW S 6 HSK 63F Speed ??electronically adjustable 0-18,000 rpm Max. tool length from flat support HSK 63 F: 280 mm Bjb Hov A R A Aoamr Ujwl Tool magazine: ----- Number of places: 24 mm Distance between places: 100 mm Weight per place 10 kg Total weight in the magazine: 240 kg Multi-spindle drilling head permanently installed ----- for horizontal and vertical drilling and milling work without changing tools Drilling and milling adapter horizontal Motor with brake 2.5 kW S1 C-axis 0 - 360 degrees Star head with 6 outputs Speed ??electronically adjustable 2,000 - 13,500 rpm Drill adapter for vertical drilling Motor with brake 2.5 kW S1 Vertical head for handle olive Vertical head for corner bearing ----- Price INCLUDING dismantling, transport within Germany and reassembly on request! NOT INCLUDING: Commissioning and, if required, creating new profiles Option used tools: ----- Wood: IV 80 and 92 Wood-aluminum: IV 80 Lift-sliding doors IV80 and 92 Front doors IV 82 and 92 Corner connection: tenon/slot, wood-aluminum sash and door counter/dowel Technical information according to the manufacturer - no guarantee! Detailed technical description on request!

Year of construction: 2014, Condition: ready for operation (used), General Data Measurements width 11484 mm Measurements depth 36500 mm Measurements height 9100 mm Bwjbswctz Hs Hamr Ujl Machine weight 172000 kg Control Unit Brand FANUC Model 31i B Main Drive Spindle speed range 2500 RPM Spindle motor power 37 kW Tool taper BT-50 Media Chip conveyor Yes Additional Equipment Auto Tool Changer (ATC): 90 Tools / Auto Angle-Head Changer (AAC): 2 Units (2) AAC Units: (1) Extension Head (L = 600 mm)/ (1) 90° Right Angle Head (L = 350 mm, Index = 5°) Hydraulic Pump & Coolant System / Coolant Through Spindle (30 BAR) External Coolant Unit 4-Axis Linear Scales This 5-axis HNK HPM 30M gantry milling machine was manufactured in 2014. Ideal for complex and precise milling tasks, it offers enhanced flexibility and accuracy. Consider the opportunity to buy this HNK HPM 30M gantry milling machine. Contact us for more information about this machine. Application Types Milling

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius Bwob Hewhf Hfsamr Uol 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: excellent (used), Year of construction: 1995, Schröder Manual Bending Machine Bsb Haewhf Ntsmr Uowl Specifications: Manufacturer: Schröder Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Bending Thickness: 1.25 mm Collecting Tray Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice -

Condition: used, Year of construction: 2012, x-travel 735 mm y-travel 650 mm z-travel 560 mm Control HEIDENHAIN TNC 530 3D table-size 800 x 650 mm rotary table 650 mm table weight 600 Kg table rotation (C-Achse) 0,001º (±360º) ° Bsbovzhb Ho Hamr Ujwl b-axis (B-Achse) -120 +120º ° workpiece dia. 840 mm workpiece height max. 500 mm rapid taverse 40.000 mm/min feed 40.000 mm/min taper HSK-A63 engine output 24 kW turning speeds 24.000 U/min Tools place 60 fach Internal cooling system 40 bar Machine on 28.008 Program on 13.900 h total power requirement 39 kW weight of the machine ca. 9.100 kg -Round table -Direct measurement system -Tool charger included -Tank with 500l paper filter -Active refrigerator cabinet -Infrared measuring probe Heidenhain -Blum laser probe meter included -Chip extractor included -Cleaning gun with 2 bar 40 l/min pump -3D quick set -HEIDENHAIN HR-410 Portable Steering Wheel

Condition: good (used), Year of construction: 1995, spindle bore 90 mm spindle diameter in front bearing 140 mm quill stroke 200 mm Bwjb Hamswhf Eber Ujl diameter of quill 100 mm Receiving ball 5 MK turning speed range 1-2000 U/min face slide travel 420 mm weight of the machine ca. 0 t dimensions of the machine ca. 0 m - Three-jaw chuck Ø315mm - 1x riding sock - 2x steady rest - Multifix inserts - 12x tool holder - 6x jaws with base holder

Condition: new, max. workpiece length 5150 mm profile spindle 1 Stück main drive 16 kW Control Beckhoff CNC Number of axles 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm; Y = 1500 mm; Z = 200 mm Beb Hamrjd Ih Hts Uswl - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid spacing - linear 4-fold tool magazine - Special clamps for straight window and door parts - special clamps for round window and door elements - 24 pcs. Vacuum clamps for internal installation - Vacuum pump - Chip conveyor belt - extensive design software for interior design, panel processing as well as f. Windows and doors: Masterwork: 2D-Wop for standard application panel processing / interior fitting with Additional function Lamello connection Master 3D Level 2: for more complex edits, optionally also expandable for 5-axis fully interpolating MasterWindow: Integrated window and door design software i.e. Machine does not have to (but of course) with external industry software be controlled. VIDEO shows production of 4 sash parts in one clamping Complete machining including glazing bead production. Corner joint hybrid. Of course, all common corner joints on the machine producible. OTHER OPTIONS ON REQUEST! We are also happy to offer you suitable tools for the machine. (ording to the manufacturer - without guarantee!)

Condition: used, sheet width 1040 mm plate thickness 1.50 mm ST diameter of upper rolls 65.0 mm side roll diameter 90.0 mm diameter of lower rolls 90.0 mm speed 6.0 m/min voltage 400 V total power requirement 1.0 kW weight of the machine ca. 680 kg range L-W-H 2250 x 825 x 1910 mm Very well-maintained condition (!!) New price including accessories ~ €20,000 Special price upon request Pre-rolling and finish-rolling is made easy with this machine thanks to its special roller concept, extensive accessories, and robust construction. A machine for both one-off and series production = extremely versatile and cost- effective. Features: - Electromechanical three-roll bending machine - Driven by spur gear brake motor + backlash - Motor-driven upper and lower rolls - Asymmetrical roll arrangement - FASTI control unit * Adjustment of max./min. travel value of side roll - Pivoting upper roll with safety bearing Bwob Hjv Td Dusamr Uel - Conical bending device - 1x double foot switch * Right/left rotation of the rolls - Electrical safety device (cable) - Machine operating manual (PDF)

Condition: excellent (used), Year of construction: 1995, Schroeder Manual Bending Machine with Segments Specifications: Manufacturer: Schroeder Model: Ak 2000/1.0 Year of Manufacture: 1995 Bob Howhf Ehsamr Ujwl Working Length: 2000 mm Bending Thickness: 1.0 mm With Segments Mobile Location: Arrives at warehouse in 54634 Bitburg - Available at short notice -

Condition: new, axis stroke (X,Y,Z) 3950,2145,555 mm Number of spindle head vertical 13 St. Number of spindles head horizontal 6 St. Number of tools 22 St. Number of milling agregates 1 St. working dimensions 3200x2000x200 mm Motor output 12 kW Control Beckhoff CNC Number of axles 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum ----- 5-Achs CNC-Bearbeitungszentrum in Auslegerbauweise (dadurch sehr große PLatten auflegbar) für Innenausbau, Plattenbearbeitungen aller Art. Kurze Zusammenfassung: ----- Verfahrwege X = 3950 mm; Y = 2145 mm; Z = 555 mm Arbeitsbereich: X = 3200 mm; Y = 2000 mm; Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung mit 2 doppelten Horizontalbohrspindeln X-Richtung und 1 doppelte Horizontalbohrspindel in Y-Richtung Sägeaggregat in Bohrkopf integriert Karussellwerkzeugwechsler mit 22 Plätzen und 102 mm Rasterabstand Konsolentisch mit 6 Traversen Werkstückanhebevorrichtung 24 Stk. Vakuummspanner für Platten und Innenausbau 1 Stk. Vakuumpumpe 100m3/h CE Schutzvorrichtung mit Bumper und Schutzgitter Referenzanschläge mit Endlauffühler Referenzring für Winkelgetriebe KIT Bogenbearbeitung (Vorbereitung für Einsatz von Massivholzspannern) Automatische Messvorrichtung für Werkzeuglänge Fernbedienung Beckhoff-Steuerung und Bosch Motorisierung Konstruktions-Software Masterwork: 2D-Wop für Standardanwendung Plattenbearbeitung/Innenausbau, Rundbogen, Türen Masterwork Funktion Lamelloverbindung Master 3D Stufe 2: für komplexere Bearbeitungen, Bwjb Hed N Rt Ujamr Ujl optional auch erweiterbar für 5-Achs voll interpolierend Fracht und Montage innerhalb Deutschland Technik und Dienstleistungen gemäß beiliegender ausführliche Beschreibung ----- SONDERPREIS in dieser Ausführung: 99.990,00 Euro zzgl. St.! ----- Ausführliche Beschreibung siehe PDF anbei. Mehr Optionen auf Anfrage! (technische Angaben laut Hersteller- ohne Gewähr!)

Condition: used, Year of construction: 2004, pressure 60.0 t chamfer lenght 2600 mm distance between columns 2050 mm column arm 310 mm working feed 10.0 mm/sec return speed 61.0 mm/sec stroke 100 - 140 mm dayligth 450 mm table height 860 mm oil volume 100 ltr. Control ELGO P8822 operating pressure max. 200 bar Number of working hours ca. 2.370 h voltage 380 V total power requirement 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 3000 x 1850 x 2050 mm good / well-maintained condition (!!) with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on request in checked conditions - machine video - ?v=PsUeM3O5wAM Equipment: - NC electro-hydraulic press brake - with ELGO NC control unit "P8822" * Input of target/actual values ??for back stop * Input of target/actual values ??for depth adjustment ` * swiveling operation, front left * manual mode selectable Bwob Haevr Hcwomr Usl - NC controlled axes: Y1 + Y2 + X - NC electro-motorized back stop, on ball screws * with 4x manually adjustable stop fingers * adjustment in R+Z axis (manual) - Upper tool holder SYSTEM A (AMADA), with upper wedge crowning * 1x split set of upper tools * clamping jaws with clamping lever (quick clamp) - 1x universally rotatable MULTI V die block - 2x side-hinged doors (protective device) - 1x rear sliding door (protective device) - 2x front stable support arms - 1x freely movable foot control (on rollers - movable) - Operating instructions (PDF)

Condition: new, max. workpiece length 3200/5100 mm profile spindle 1 Stück main drive 12 kW Control Beckhoff CNC Bwob Hed Rhd Reamr Uel Number of axles 5 St.

Condition: new, max. workpiece length 3200,5100 mm profile spindle 1 Stück main drive 12 kW Control Beckhoff CNC Number of axles 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum ----- 5-Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, Treppen Kurze Zusammenfassung: ----- Arbeitsbereich: X = 3200 mm (Optional 5100 mm) ; Y = 1500 mm; Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung mit 2 doppelten Horizontalbohrspindeln X-Richtung und 1 doppelte Horizontalbohrspindel in Y-Richtung Sägeaggregat in Bohrkopf integriert 27 Werkzeugwechselplätze: Karussellwerkzeugwechsler mit 22 Plätzen und 102 mm Rasterabstand lineares 5-fach Werkzeugmagazin für große WKZ-Durchmesser Konsolentisch mit 6 Traversen Bebod N Rt Ts Hamr Ujwl Werkstückanhebevorrichtung 6 Stk. spezielle Spanner für runde Fenster- und Türenelemente 24 Stk. Vakuummspanner für Platten und Innenausbau 1 Stk. Vakuumpumpe 100m3/h 1 Stk. Spänetransportband 1 Stk. Fernbedienung Konstruktions-Software Masterwork: 2D-Wop für Standardanwendung Plattenbearbeitung/Innenausbau, Rundbogen, Türen Master 3D Stufe 2: für komplexere Bearbeitungen, optional auch erweiterbar für 5-Achs voll interpolierend Fracht und Montage innerhalb Deutschland Technik und Dienstleistungen gemäß beiliegender ausführliche Beschreibung ----- Gesamtpreis in dieser Ausführung: auf Anfrage! ----- Optionen mit Mehrpreisen: ----- Arbeitslänge 5.100 mm anstelle 3.200 mm inklusive Erhöhung Konsolenanzahl und Spannmittel Mehrpreis: 7.500,00 Euro zzgl. MwSt. Zusätzlicher Karussellwerkzeugwechsler mit 16 Plätzen und 102 mm Rasterabstand Mehrpreis: 6.500,00 Euro zzgl. MwSt. Ausführliche Beschreibung siehe PDF anbei. Mehr Optionen auf Anfrage! (technische Angaben laut Hersteller- ohne Gewähr!)

Condition: used, saw-blade dia. 500 mm Cutting height 120 mm Bebewhf Ips Hamr Ujwl Motor output 5,5/7,5 kW working length 4100 mm

Condition: used, Number of spindles 4 St. Working width 260 mm Working height 160 mm Length of the planing table 2000 mm Feed speed 6-12 m/min. total power requirement 28 kw Dimensions (L/W/H) 3.300 x 1.600 x 1.700 mm Dust suction hood 1 x 250 mm Weinig Cube four-side planer ----- Machine is cleaned and checked. Technical data ----- Working width 20 - 260 mm Working height 8 - 160 mm (with tool flight circle 125 mm) Spindles ----- WEINIG Easylock with precision reversible knives in HSS for quick and convenient knife changing. You have never changed a knife so quickly. Customer benefits: - no adjustment necessary - short downtimes - no adjustment errors - easy to use Motor strengths: 1st spindle bottom: 7.5 kW 2nd spindle left + 3rd spindle right common motor 11.0 kW 4th spindle bottom: 7.5 kW Feed system ----- Frequency-controlled feed, infinitely variable 6 - 12 m/min Durofer pointed tooth rollers with depth limiter and self-cleaning Pneumatic pressure for feed rollers, including water separator Cycle-controlled dressing to support manual dressing. The feed roller is released after the second feed roller has gripped the workpiece. After leaving the second feed roller, the feed roller is brought into the starting position for the next workpiece. Machine electrical system ----- Operating voltage 400 volts (voltage range 380 - 420 volts), 50 hertz Electrical design according to DIN VDE 01 13, electrical equipment of industrial machines EN60204, IEC- 204-1. Other electrical regulations are not taken into account. Bwsb Hjwhf Iveamr Uel Before operating frequency-controlled devices and systems, the customer must install an all-current-sensitive residual current device in accordance with DIN/ VDW 0100-482 in operating facilities at risk of fire Control of the extraction system via the machine software Machine stands, tables and stops ----- Planting table 2.0 m long (including jointing tine) One sliding roller in the outfeed table Automatic lubricant supply for removing resin from the table, including 5 liters of lubricant. - controlled by incoming and outgoing wood - lubricant quantity dependent on the set planing width - controlled by running meters traveled - improved transport of individual parts - reduction in contamination from resinous wood - extremely easy to use One sliding roller in the outfeed table MPV - MoulderPreView ----- Optical projection of the finished dimensions onto the raw part before processing. - Dimensional control before planing - Consideration of deflection and curvature when setting - Quick correction of the planing and joining Customer benefits: - Assessment of the workpieces before processing - Higher product quality - Visual inspection Machine operation ----- The clear software was specially developed for the CUBE. Thanks to the intuitive operation, training is not necessary. What can the CUBE software do: - Lightning-fast setting of the workpiece dimensions - Motorized setting of the planing and joining - Clear layout, large symbols - Memo function The last 10 dimensions are saved and can be repeated if necessary. - stepless adjustment of the feed rate - ...

Condition: used, Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 4100 x 2650 x 1050 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 4100 x 2600 x 1050 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. Bwob Hamrewhf Iio Ujl The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2011, Tenoning spindle 1 Stk Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2784 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please inquire about additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Adjustment range: radially pneumatically controlled to 8 positions, e.g., for edge rounding from above > Laser alignment light for detecting the sawn section Item 2: Rounding unit, horizontal, bottom ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm mm > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm > Axial adjustment range mechanically coupled to cross-cut saw > Radial adjustment range pneumatically controlled on/off Length stop NC-controlled ----- > Length 3,500 mm > Electronic length stop Item 3: Tenon and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 3,500 rpm > Maximum tool travel: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Cylinder and Counter-rotation) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right Bob Hamswamqvor Ujwl > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (concurrent spindle area), Rung support bar from above in the area of ??the profile milling unit vertically on the right, and profiling spindle. Item 6: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.8 kW > Speed: 9,000 rpm > Max. tool travel: 130 mm > Axial adjustment range: 30 mm, 8 positions > Radial adjustment range: 125 mm, 8 positions Item 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions > Radial adjustment range: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool travel: 210 mm > Motor power: 3.8 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.8 kW > Tool clamping length: 125 mm > Axial adjustment ra...

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Bjb Hov Uq Tljamr Ujwl Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

Condition: used, Number of spindles 4 St. Number of tools 11 St. Spindle diameter 50,40 mm Spindle length 285,125 mm length 4000 mm width 2000 mm height 2200 mm Weinig Univar 10/3 folding machine ----- For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts Bob Haovnv Uuomr Uswl The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) ----- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion 2. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 3. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ----- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. ...

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Beb Heif Az Ueamr Uewl Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be checked ! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom Bwsb Hamrou Su Hue Uel > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)