Laminating Lines

BARBERAN RFU-4-C-1700

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Lodpoi E Trpefx Aftsad

Year of construction: 2000, condition: good (used), Barberan laminating line all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm smooth speed control from the brushing machine, maximum speed 20 m / min. the line includes - automatic loading of Tommassini (out of order) - brushing machine up and down - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps Lodpfeilqvrjx Aftsad - a line of steel calenders for pressing - in addition, the line has a purchased crowning machine for the upper surface (working) - can be laminated on one side with PP foils

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces Lsdpfx Afeg Ezaretoad -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Regoplas RT50 Thermo oil temperature control unit Thermo oil up to 300'C Lasdedmn E Hjpfx Aftjd

Condition: new, Year of construction: 2024, machine/vehicle number: CAT3512BJLY892034, fuel type: diesel, power: 1,280 kW (1,740.31 HP), motor manufacturer: Caterpillar 3512B, General information Field of application: Construction Weights Empty weight: 14.000 kg Functional Generator capacity: 1.600 kVA Dimensions of cargo space: 572 x 208 x 222 cm CE mark: yes Ljdpowvdvuofx Aftjad Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fuel consumption: 238.6 Liter / Hour at 75% Load Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel = Remarks = This brand new machine is part of Caterpillar's rebuild program Ask us for more information. Available in 50Hz - 400V Prime rating 1.500 kVA, Standby rating 1.600 Controls: EMCP4.2 / ADEM 3

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Ljdpfx Asrt Uvzeftsad Miscellaneous: Very good used condition, fully operational

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from Laodpouc Idxefx Aftjd 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Year of construction: 2001, condition: used, • Heating plate size (mm): approx. 1500 x 2700 • Usable area max. (mm): 1250 x 2450 Lsdpjkt N Hujfx Aftjad • Loading side (mm): 1500

Condition: like new (used), Inline foil sealer and shrinking tunnel Make: Kallfass Type: semi/automatic shrinking tunnel Model: Mat 1606-KS1600uni Capacity: 10-15 packs/min (depending on the product) Frame: Steel Ledpfjg D Nv Tsx Aftsad Range: 1600 (belt) x 600 mm (W x H) Dimensions: L x W x H = 4000 x 2050 x 1750 mm Weight: 900 kg Electrical: 380V + N + E, 65 kW Condition: As is, working condition

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow Lasdpfsx Dmdhox Aftod System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow