Dosing unit powder dosing crew Dosing

Rospen MSF ON 8203

Condition: good (used), Year of construction: 2013, VIKING MASEK ST 200 Stickpacker This 2-lane machine has a maximum output of 65 sticks/min and is designed for forming, filling, and sealing stick packs with powder. Bag width: 17 - 40 mm Bag length: 50 - 200 mm Fill volume: 0.2 - 100 ml Max. film roll diameter: 400 mm Max. film width: 400 mm Fodpfxjxvzano Alqsgb Manufacturer: Viking Masek Year of manufacture: 2013 Space requirement: 120 x 250 x 260 cm

Condition: ready for operation (used), Year of construction: 2008, Two Merz sachet machines for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified: 2008, pouch width range: 15mm-160mm, pouch length range: 15mm-200mm, filling volume range: 0.2ml-250ml, filling capacity: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified: 2000. Both packaging machines are duplex-capable. Documentation available. On-site inspection is possible. Individual sale possible. Fjdjvcpz Ropfx Alqsgb

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: M-VAC 100 Technical data: 50Hz / 5.5 kW / 11.5/6.6 A Final pressure with open gas ballast: 0.35 mbar Final pressure with closed gas ballast: 0.25 mbar Fgsdoq S N Iijpfx Alqsb Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Condition: new, Year of construction: 2026, 0400 mm 246 mm 1250 mm 195 mm Fgodpfx Aloxcyxceqob 54 mm 7,5 kW

Condition: new, Year of construction: 2025, total length: 1,600 mm, total width: 2,200 mm, total height: 2,350 mm, overall weight: 250 kg, type of input current: three-phase, working width: 1,400 mm, Paint booth, paint wall, suction TQN1414 With right or left side discharge. Working dimensions (mm): 1400 (width) x 1400 (height) x 800 (depth) Overall dimensions (mm): 1600 (width) x 2350 (height) x 1250 depth SPECIFICATION: • Fan power 1.5 kW, • Efficiency 6,500 m³/h, • 2 x 100% polyester filter • Filtration degree at the level of 99.9%, • Control panel IP 66, • Automatic filter cleaning • Hermetic lighting IP 65. • Paint tank Cabin available immediately (Stock status) SELECT BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Fodpfx Asd S N I Njlqjgb Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. brand products have an EC certificate. We offer our own transport - prices are set each time, for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Fgedsviq U Eepfx Alqob Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ Fgjdpfx Alsfz Anpsqeb 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Brand: GEMINIS Model: CNC 4 PLUS 620 x 2000 Cnc : FAGOR Distance between points : 2000 mm Height of centers : 315 mm Fgsdpfx Alswznp Neqeb Max. turning diameter : 620 mm Swing over saddle diameter : 370 mm Bar passage : 80 mm Precision swivelling turret: 1st speed range: 0 to 355 rpm 2nd speed range :0 to 1800rpm Tailstock : Morse 6 Main motor : 15 kw Max. Piece weight : 2.560 kg Tailstock quill diameter : 140 mm Machine size (L x Wx H): 4300x 1900 x 1800 mm

Year of construction: 2025, condition: new, Bulk Bag unloading system with lifting crane incl. vacuum pump with a capacity of up to 5000kg/h. - Specification of the lifting crane: max. weight per bag: 1T; max. bulk bag size: L1200xW1200xH1700mm; machine dimensions without side crane: L1740xW1740xH5400mm; - Specification of the vacuum pump: Capacity: max. 5000kg/h; power: 380V, 5.5kW; hopper diameter: 650mm; discharge diameter: 420mm; height of vacuum pump: 1800mm. Fgsdpfxsv Nk Dae Alqeb That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Industrial mixing machine for blending dry, moist or pasty products, specifically designed for products with large net weight. The horizontal single shaft with the double ribbon mixers is blending the materials into high uniformity in a few minutes. – Specifications: agitator type: single-shaft double ribbon agitator; capacity: max. 9000 liters; max. speed of the machine in neutral: 20 rpm; power: 90kW; machine dimensions: L6500xW2100xH2800mm; weight: 9800kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Fedpfsv Nly Aex Alqjgb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.