3-sided tipper

Renault D 150 + 3SIDE TIPPER + EURO 6 + PERFECT!!! 186KM

Condition: used, mileage: 247,575 km, power: 77 kW (104.69 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 2,248 kg, maximum load weight: 551 kg, overall weight: 2,799 kg, fuel: diesel, CO₂ emissions: 172 g/km, fuel consumption (urban): 7.3 l/100km, fuel consumption (extra-urban): 6.1 l/100km, fuel consumption (combined): 6.5 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 5,120 mm, Year of construction: 2016, construction height: 1,980 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, trailer coupling, AdBlue system malfunction. The Ford Transit Custom 290 2.0 TDCi is a reliable used car, ideal for business people. It was first registered in November 2016 and has a mileage of 247,575 km. With a powerful 2.0-liter diesel engine and an output of 77 kW (105 hp), it offers efficient performance and meets the Euro 5 emissions standard. Ffjdstyz D Nepfx Afnet The vehicle is equipped with a manual transmission and has an average consumption of 6.5 l/100 km. The panel van model is characterized by practical equipment features, including air conditioning, cruise control, trailer hitch (AHK) and workshop fittings. Driver and passenger airbags as well as modern assistance systems such as the hill start assist ensure safety. Additional features such as an on-board computer, parking pilot system front and rear, and adjustable steering column increase driving comfort. The rear wing doors with a 180 degree opening angle and a sliding door allow for flexible loading options. The vehicle is in good condition, but the AdBlue system has a fault. The loading volume is optimized by a high partition. Other highlights include the medium-high roof variant, tinted glazing and an extensive interior filter. The dimensions are 5,120 mm in length, 2,032 mm in width and 1,982 mm in height. With a green environmental sticker, the Transit can be used in many environmental zones. Special equipment: Airbag on passenger side, vehicle without vinyl floor covering in the loading/passenger compartment, rear wing doors with glazing (opening angle 180 degrees), tailgate without glazing, high loading compartment partition behind driver and passenger, with window and through-loading option below, parking pilot system front and rear, visibility package 1 Other equipment: Airbag on driver side, traction control (ASR), basic, indicator light integrated in exterior mirror, on-board computer, electric brake force distribution (EBD), driver assistance system: hill start assist, interior filter: pollen filter, body/structure: high-space box, body variant: medium-high roof, steering column (steering wheel) adjustable in height/length, truck registration, engine 2.0 liter - 77 kW TDCi KAT, radio preparation, 4 speakers, wheelbase 2933 mm, spare wheel in driving tires, low emissions according to Euro 6 emission standard, headlights H4, sliding door in the loading/passenger compartment on the right, mud flaps at the front and rear, side protection strips, bumpers partially painted, tinted glazing, paneling in the loading/FG compartment: half-high, lashing rails on the side of the loading compartment Equipment was determined using a VIN query, errors can occur here for technical reasons COC is available Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, Working width 1350 mm Number of sanding units 2 st. Fsdpfx Aormucxsfnsft Workpiece thickness max. 160 mm sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS

Condition: used, Year of construction: 2024, operating hours: 315 h, machine/vehicle number: 36373, fuel type: diesel, Empty weight: 3.425 kg Lifting capacity: 250 kg Working height: 2.700 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Fodpfx Aovf T Uysfnoft Max. horizontal reach: 1700 m Transport dimensions (LxWxH): 7.69x2.2x2.98 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2014, Power Control PC 22 with WoodWop software - POWERTOUCH Panel height mm 8 - 60 Pvc/Abs mm 3 Feed speed up to mt/min 25 (with rounding 20 mt\min) Working height electronically adjustable by N.C. Motorized rubberized belt with upper pressure Panel support guide and easy introduction for small panels Controlled infeed guide Anti-adhesive group Rectifying group with two KW 3 motors each, 9000 RPM Reel magazine Gluing group for PUR glue with pre-melter and glue tank Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C. End trimming unit with 2 motors (automatic tilt adjustment?) Overlapping trimming unit with 2 motors Rounding unit with 2 multifunction motors (cornering unit + rounding unit) with NC adjustment Edge scraping unit Glue scraping unit Brushing unit Anti-stick unit TECHNICAL DETAILS TO BE CHECKED Fedpfx Aovqbh Eefnoft

Condition: used, mileage: 381,395 km, power: 161 kW (218.90 HP), first registration: 06/2014, fuel type: diesel, overall weight: 7,490 kg, color: brown, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 8,600 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,830 mm, loading space width: 2,470 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, DAF LF 220 box truck with Palfinger tail lift 4x2 Suspension: leaf/air Wheelbase: 5.00 m Payload: 1,770 kg PALFINGER tail lift Type: 1000AQ Year: 2014 Equipment: - Tail lift - Central locking - Digital tachograph - Electric windows - Radio-CD Fjdpfx Ajrpxhuefneft We are also happy to assist you with financing/leasing through our partners. All information subject to change. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2020, We offer: Deburring machine Manufacturer: Viet Type: SV3-4.3 RVXR Year of manufacture: 2020 Technical specifications and features: - Sanding belt change on the left side of the machine. - Tool set - Digital thickness display - Material too thick at the inlet - Electro-pneumatic oscillation control - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics Fjdpfx Asv Hxrgjfneft - Pneumatic lifting and lowering when switching the units on and off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extensions at the front and rear, each with 1 roller - Industry 4.0 (LAN) package with LAN connection to the network - Working width: 1350 mm - Machine with movable head - Centesimal lifting system with inverter - Useful working height 160 mm - LED lighting inside the machine - Electronic belt control for the longitudinal units - Calibration sanding unit with sanding roller diameter 190 mm, belt length 2620 mm - Electromechanical grit set - The speed of the sanding unit can be adjusted using the frequency converter The sanding belt can be adjusted. - V-Spin unit with 15 disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving in opposite directions. The combination of these two movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm Scotchbrite + 80 grit abrasive - 16 backing pads for V-Spin units, diameter 80 mm Tampico + 80 grit abrasive - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads with 3 pads of rotating sanding brushes (diameter 123 mm) inserted inside each head. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP) Speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 SH with a smooth surface - Belt cleaning fan for the conveyor belt including suction - IPC MONITOR 15" touchscreen control for operating the machine, up to a maximum of 10 processing units. The control manages the following processes: - Start sequence of the selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness regulator - Acoustic and visual indicator when the machine starts up - Operating hour meter - Automatic control of the feed speed depending on the processing performance (expressed in square meters). This allows for a longer service life of the sanding belt based on the statistics. The machine is in very good condition and is used for 2 Euro pallets. New sanding belts included. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in technical data and information, as well as prior sale.

Condition: used, mileage: 113,217 km, power: 62 kW (84.30 HP), first registration: 11/2012, fuel type: diesel, empty load weight: 1,421 kg, maximum load weight: 741 kg, overall weight: 2,162 kg, axle configuration: 4x2, wheelbase: 2,681 mm, fuel: diesel, CO₂ emissions: 161 g/km, fuel consumption (urban): 7.7 l/100km, fuel consumption (extra-urban): 5.1 l/100km, fuel consumption (combined): 6.1 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 1, total length: 4,406 mm, Year of construction: 2012, construction height: 1,820 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Engine failure. This used Volkswagen Caddy 2.0 TDI with EURO 5 standard has a 6-speed manual gearbox and is equipped with two sliding doors that allow easy side access. The vehicle has a truck registration and a side loading option of 2.65 meters, which is practical for transporting bulky items. With an engine of 2.0 liters and an engine power of 62 kW (84 hp), this vehicle offers sufficient power for city traffic and short cross-country trips. Consumption is 6.1 l/100 km in the combined cycle. The vehicle was first registered in November 2012 and has a mileage of 113,217 km. It is a 4-cylinder diesel with front-wheel drive. The environmentally friendly classification in the Fedpfx Ajvugkgjfnjft emissions class Euro 5 enables access to environmental zones with a green badge. The main inspection is valid until December 2024. The color of the Caddy is a striking broom yellow (R1032). A viewing is possible at any time without registration. Additional services such as registration service and delivery within Germany are offered for an additional charge. Sale only to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: excellent (used), Year of construction: 2019, ATLAS COPCO COMPRESSOR XATS138 7.00m3 2019. Mobile compressor ATLAS COPCO XATS 138 machine after full service!!! Technical data: capacity 5,00-7,00 m3/min; working pressure 7-10.3 Bar; production year 2019; KUBOTA engine Fjdpfx Asimg Scjfnoft mileage 300 h !!!!!; compressor fully operational Below is a link to the video , showing the work of the machine

Condition: good (used), 25 running meters tire rack Used, very good condition, see pictures height 2,5 m depth 50 cm, field load 9000 kg beam length 2,1 m Beam with superimposed load / compartment 1000 kg Negotiable price: € 1.950,-- net ex stock Offer consists of: + 12 pcs. frames pre-assembled, 9t field load, depth 50 cm, height 2,5 m + 66 pcs. beams, length 2,1 m, 1000 kg payload/slot + 132 pcs. suspension locks + 24 pcs. concrete anchors Load plates Other composition on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks Ffsdpfx Afofdik Ienjt from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: used, machine/vehicle number: 007687, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Fjdowuz Npopfx Afneft Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr