Truck crane arm

Renault 270 DCI

Condition: used, mileage: 728,985 km, power: 199 kW (270.56 HP), first registration: 05/2005, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,500 mm, color: white, gearing type: mechanical, number of gears: 8, emission class: euro3, suspension: air, Year of construction: 2005, Equipment: electric window regulation, spoiler, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 6.174 cc Drivetrain Drive: Wheel Engine type: Renault 6verticaux en ligne Axle configuration Tyre size: 315/70R22,5 Suspension: air suspension Rsdpfx Ajuc E Dijhgecf Rear axle: Double wheels Weights Empty weight: 7.220 kg Carrying capacity: 11.780 kg GVW: 19.000 kg = Additional options and accessories = - Roof spoiler

Condition: defective spare-parts repository (used), functionality: limited functionality, machine/vehicle number: 186789, power: 82 kW (111.49 HP), first registration: 09/2011, fuel type: diesel, gearing type: mechanical, Year of construction: 2011, For sale: a Citroen C4 e-HDi 110. Rsdjzfatljpfx Ahgecf The handbrake is defective, and there are minor scratches on the rear and right side.

Condition: new, empty load weight: 540 kg, maximum load weight: 2,460 kg, overall weight: 3,000 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, tire size: 195/55R10C, Alufelgen, Felge schwarz, Car transporter from the manufacturer ANSSEMS model MSX3000 405x200 Go-Getter. As standard equipment, the Anssems car trailer has an aluminum floor, side edge profile in black, aluminum rims in black, LED lighting, storage box, lashing eyes on the outside of the frame, aluminum drive-on rails can be inserted under the loading area, low chassis, stable welded steel frame, support wheel and a V-drawbar. Rcjdpfxoq Rfl Ts Ahgjf We also offer accessories for Anssems car transport trailers such as high tarpaulin, side wall attachment, wheel stopper, rear support set, car lashing straps and anti-theft device.

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Backstop: Yes Rcodpfx Ahsg Stz Ajgef Power: 78 kW Ratio: 44,16:1 RPM in/out: 1.400 / 31,7 Shaft ø in: 65 mm Shaft ø out: 140 mm

Condition: excellent (used), Year of construction: 2010, 1. Gas burner WEISHAUPT WM-G30/2-A --- 4100 kW, with DUNGS gas train DN65 Output: 450–4100 kW Version: ZM Rcjdswg Hkcspfx Ahgjf Year of manufacture: 2010 2. Gas burner WEISHAUPT G50/1-B - 4000 kW, with DUNGS gas train DN65 Output: 550–4000 kW Version: ZM-NR Year of manufacture: 2004

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) Rodpfxorgzv Ne Ahgjcf * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, Planing machine available in 2-sided or 4-sided design REX HOMS Redpeyid Uyefx Ahgocf Working width max. 2050 mm Working height max. 310 mm including swivel ring The 8 images show a REX HOMS 2050 in water blue color which was overhauled and delivered by jöma several years ago and serves as an example.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 510 mm, turning length: 752 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, feed rate X-axis: 18,000 m/min, feed rate Z-axis: 24,000 m/min, CNC Lathe MORI SEIKI ZL-2035MC – Technical Data Sheet The MORI SEIKI ZL-2035MC is a high-precision CNC lathe, ideal for advanced multi-axis turning operations, featuring dual spindles and live tool turrets. Manufactured in December 2002, it is engineered to deliver productivity and accuracy in complex machining processes. General Specifications Brand: MORI SEIKI Model: ZL-2035MC Category: CNC Lathe Year of construction: 12/2002 CNC Control: MORI SEIKI MSG-501 Machine weight: 5,900 kg Machine Dimensions: Length: 4,350 mm Width: 2,400 mm Height: 2,200 mm Machining Capacities Max swing over bed: Ø 680 mm Max swing over carriage: Ø 510 mm Distance between centers: 752 mm Max turning diameter: Spindle No. 1: Ø 390 mm Spindle No. 2: Ø 294 mm Max turning length: 520 mm Bar capacity: Ø 65 mm (Ø 51 mm on No. 2) Axis Travels X Axis: No. 1: 235 mm No. 2: 175 mm Z Axis: No. 1: 520 mm No. 2: 490 mm B Axis: 505 mm Main Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-6 Chuck diameter: Ø 210 mm Minimum programmable C axis angle: 0.001° Spindle motor power (continuous/30 min): 11 / 7.5 kW Sub-Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-5 Chuck diameter: Ø 160 mm Minimum programmable C axis angle: 0.001° Spindle motor power (continuous/30 min): 7.5 / 5.5 kW Tool Turrets Turret No. 1 Number of stations: 12 Driven stations: Yes Driven tool speed: 4,000 rpm Turning/boring tool dimensions: 25x25 mm / Ø 32 mm Turret No. 2 Number of stations: 8 Driven stations: Yes Rodpfxsxd Td Us Ahgocf Driven tool speed: 3,000 rpm Turning/boring tool dimensions: 25x25 mm / Ø 32 mm Rapid Feeds X axis rapid traverse: 18,000 mm/min Z axis rapid traverse: 24,000 mm/min B axis rapid traverse: 24,000 mm/min Manual feed for X / Z / B axes: 0 – 1,260 mm/min Included Accessories 5 live tool holders and various fixed toolholders Chip conveyor Transformer Part unloading arm Coolant tank with pumps Manuals, electrical diagrams, and CE Declaration

Condition: used, mileage: 212,354 km, power: 88 kW (119.65 HP), first registration: 02/2010, tire size: 225/65R16C, axle configuration: 4x2, wheelbase: 4,050 mm, color: orange, gearing type: mechanical, number of gears: 6, emission class: euro4, suspension: steel, Year of construction: 2010, Equipment: electric window regulation, trailer coupling, Tyre size: 225/65R16C Suspension: leaf suspension Drive: Wheel Number of cylinders: 4 Engine capacity: 2.464 cc Empty weight: 2.200 kg Carrying capacity: 1.300 kg GVW: 3.500 kg Rcjdjuczgtjpfx Ahgef Make of engine: Renault

Condition: used, Year of construction: 2004, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Rcodpfx Aheyy Nnqogof Yorick Diebels