Temperature control unit

REGLOPLAS P140 M

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Ihsdpfx Ahothd Shsvew Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr Isdpfx Ahjp Audqevshw DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: new, functionality: fully functional, Year of construction: 2026, Product characteristics: Ihjdperidh Njfx Ahvsw The Cormak 2-ton gantry crane is a specialized industrial machine designed for moving heavy loads in industrial halls. It consists of many elements, including a supporting frame, a trolley and other components that enable easy, safe and precise movement of loads horizontally and lifting and lowering them using hooks. The model is distinguished primarily by its durability and stable construction, thanks to which it can be used in difficult industrial conditions. This crane is also resistant to torsion, which is ensured by additional reinforcements used in the structure. One of the most important features of the crane are four return rollers that ensure easy movement of heavy loads. These rollers are extremely durable and abrasion-resistant, which guarantees their long service life. Another important element are the built-in parking brakes, which ensure safe stopping of the crane in any place. Height adjustment on the device is easy and safe when the lever is not loaded and with the help of two screws securing each bracket. The crane's structure is durable and stable, and its ease of use makes it an ideal solution for companies that need an efficient and reliable machine for moving heavy loads. Moreover, the multitude of retrofitting options allows it to meet even more applications and tasks in various industrial sectors. Thanks to its efficiency and precision, the overhead crane is a versatile work tool that can be additionally equipped with rope or chain winches. After using a block, an overhead crane with a winch or chain allows for even more precise and effective movement of heavy loads. As a result, it is used in many industrial sectors, such as construction, metallurgy and the chemical industry. Using a gantry crane, you can carry out warehouse, assembly, loading and unloading works, as well as repairs. All these activities are performed with high precision and safety, which in turn translates into higher quality of work. Technical parameters: Load capacity: 2000 kg Double T-carrier: 100 x 180 mm Height: 2400 mm – 3600 mm Width: 2360 mm Weight: 168 kg Overhead crane without a winch visible in the photos

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) Isdpewugczsfx Ahvohw 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation Ihedpfx Aeg Ey Ufehvjw -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, New equipment MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Example as pictured: L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm Outer width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles both in the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable braked castors Side collection plates in the infeed section Ihjdpfx Ahod Tidxovsw Optionally also available as angled conveyor with Supergrip belt and separator (see last two photos) Double roller separator with covered belt drive fitted with Super Grip Adjustable discharge chute

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control Ihedpoddv Itjfx Ahvew -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Condition: excellent (used), Year of construction: 2019, operating hours: 12,188 h, functionality: fully functional, machine/vehicle number: 233832, clamping force: 1,200 kN, screw diameter: 40 mm, mold height (min.): 300 mm, ejector stroke: 130 mm, opening stroke: 507 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,854 mm, total width: 1,508 mm, total height: 2,503 mm, overall weight: 6,800 kg, pressure: 1,300 bar, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, ENGEL VICTORY 500/120 SPEX injection molding machine, 2019, 120T, ECODRIVE, CC300, 12188 h For sale: ENGEL VICTORY 500/120 SPEX injection molding machine in excellent working condition. The machine has been used in a single production facility, regularly serviced and maintained, fully operational and ready for immediate use. Technical details: Year of manufacture: 2019 Operating hours: 12 188 h Clamping force: 120 tons Type: tie-barless Mounting plate with centering hole Ø125 mm Central ejector 12 heating zones for hot runner (Euromap 14), up to 22 kW total power Sliding hopper base Bimetallic barrel Screw type S8, GPS (G1), Ø40 mm, L/D 20 Non-return valve UNR9 (R9B) Ceramic heating elements ECODRIVE hydraulic package – SHV1 CC300 controller (languages: Polish, English) Ijdpjxmu N Dsfx Ahvohw Ecograph, IQ weight monitor Power supply: 3x400V + N + PE / 50Hz 4-fold rotameter Contactless position sensors 4 programmable digital inputs and 4 outputs Piovan S52 material loader (150 kg/h) Weight: 6 800 kg Condition: For sale: ENGEL VICTORY 500/120 SPEX injection molding machine in excellent working condition. The machine has been used in a single production facility, regularly serviced and maintained, fully operational and ready for immediate use. Technical details: Year of manufacture: 2019 Operating hours: 12 188 h Clamping force: 120 tons Type: tie-barless Mounting plate with centering hole Ø125 mm Central ejector 12 heating zones for hot runner (Euromap 14), up to 22 kW total power Sliding hopper base Bimetallic barrel Screw type S8, GPS (G1), Ø40 mm, L/D 20 Non-return valve UNR9 (R9B) Ceramic heating elements ECODRIVE hydraulic package – SHV1 CC300 controller (languages: Polish, English) Ecograph, IQ weight monitor Power supply: 3x400V + N + PE / 50Hz 4-fold rotameter Contactless position sensors 4 programmable digital inputs and 4 outputs Piovan S52 material loader (150 kg/h) Weight: 6 800 kg Condition: excellent, available for inspection and test run. Location: Hajnowka, Podlaskie, Poland

Condition: excellent (used), Year of construction: 2019, We now have 13 SSI Schaefer SLL LogiMat Vertical Lift Modules from 2019 available for sale. These machines are in very good condition and have been serviced every year by the manufacturer since they were installed. Thanks to this regular maintenance and careful use, the machines are still very reliable. These Vertical Lift Modules are designed to provide maximum storage in a small space. Tray size: 4.025 mm wide × 815 mm deep Tray area: About 3.3 m² Number of trays per machine: Around 49 Total storage area per machine: About 160 m² Floor space used per machine: Only 14.12 m² Each machine includes an optional light pointer, which shows exactly where to pick items. This helps make order picking faster and safer. To use the light pointer, the machine must be connected to an ERP or WMS system. The machines have only run about 30,000 to 60,000 cycles each – about 1 to 2 years of normal use. The height of the machines is 8,200 mm, but they can be adjusted to fit your warehouse ceiling during installation. Ihedjwi Iywspfx Ahvow Specifications – SSI Schaefer LogiMat SLL Vertical Lift Module Manufacturer: SSI Schaefer Model: LogiMat SLL 4025-815-8200/400 Year of Manufacture: 2019 Condition: Very good - serviced annually by the manufacturer Number of Units Available: 13 Height: 8,200 mm Width (Machine / Tray): 4.570 mm / 4.025 mm Depth (Machine / Tray): 3.092 mm / 815 mm Floor Space Used per Unit: 14.12 m² Number of Trays per Unit: Approx. 49

Condition: excellent (used), Year of construction: 2006, operating hours: 33,108 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, Technical Details Manufacturer: Engel Model: V 330H/80V/130 Combi Cleanroom Year of manufacture: 2006 Ihedpfxot A Ui As Ahvsw Operating hours: 33,107 h Screw diameter: 25/22 mm Machine weight: 10,600 kg Additional equipment included: GEKU SR 500 ST robot Safety enclosure Rotary table The machine has run nearly 33,107 hours in automatic mode. Current note – Tax advice and advantage for used machines From 01/07/2025, used machines can also be depreciated for tax purposes with a special annual depreciation rate of 30%. In addition to the more favorable price compared to a new machine, you can claim the same depreciation benefits as for a new machine. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E)