Power generator

Pramac GPW 60 I Stage 5

Year of construction: 2023, condition: new, Continuous power: 20.12 kVA / 16.10 kW Voltage: 230 V / 400 V Hsdpfxomw Ui Re Ab Ujfn Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 liters Generator type: IP21 protection class, MeccALte Starting mode: electric Generator with AVR control Dimensions and weight: Length (mm):1645 Width (mm):870 Height (mm):1072 Weight, dry: 640 kg

Condition: good (used), Year of construction: 2017, operating hours: 8,760 h, Vehicle description TAKEUCHI TB 2150 tracked excavator Year 2017 acc. Counter 8.760 hours 85 KW 15.075 KG - hydr. quick coupler - Backhoe bucket - Slope bucket NEW - hydr. swivel arm - hydr. quick coupler - hydr. dozer blade - electr. tank pump - ready for immediate use Hjdpfxjugf U As Ab Uefn - 270cm width Sales price: 54.900,-- net also favorable delivery possible!

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller Hfsdpfx Abortrvys Uen 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Grinding Wheel Dressing Machine: Easy to Operate, Robust, and Precise Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of easy operation and exceptional stability. The solid granite bed ensures the highest precision and durability, while the user-friendly operation maximizes efficiency in your workshop. Hfodpfoubbrtjx Ab Usn While you continue production on your tool grinding machine, our dressing machine saves you time and, therefore, money. Ideal for those who value reliable performance and top value for money!

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Hodjxfrv Eopfx Ab Uefn Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Hfjdpfxonkan Hj Ab Ujn Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Year of construction: 2022, operating hours: 0 h, condition: new, Carrier weight: 20-33 tons Operating weight: 1800 kg Oil flow rate: 130-180 l/min Oil pressure: 150-170 bar Chisel diameter: 140 mm Impact frequency, Auto Start / Auto Stop mode: 400-800 bpm Sound power level: 120 db(A) Hodpfx Aeiwxnvsb Uefn

Condition: new, Year of construction: 2026, Machine Description 1. Worktable Sectioned vacuum worktable with FOUR independent vacuum zones, manufactured from rigid and durable HPL panels. Each zone features vacuum ports connected via a piping system to the vacuum pump. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. T-slots are also provided for manual workpiece clamping when required. 2. HQD Spindle High-quality 9 kW brushless HQD spindle, powered by an inverter with built-in overload protection. High-speed electro-spindle equipped with an innovative air-cooling system. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System High-performance, energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring excellent machining quality at high feed rates. Brushless servo motors driving the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. X and Y axis movement is transmitted through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for long-term reliability. All axes are equipped with professional HIWIN linear guide rails, which undergo strict quality inspections and testing throughout the manufacturing and assembly process. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining operations, resulting in improved surface finish and machining accuracy. 5. 8-Position Tool Changer & Tool Length Sensor Hfodpjvupcrofx Ab Uen Equipped with an 8-position linear automatic tool changer (ATC), supplied with ISO30 tool holders and ER32 collets. Included collets: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump (Optional) & Dust Extraction Hood Four independent vacuum zones for efficient workpiece holding. Pneumatically operated dust extraction hood mounted around the spindle, allowing connection to virtually any dust extraction system while maintaining a clean working environment, improving operator safety, and preserving machining accuracy. Technical Specifications Parameter Value Working Area 2100 × 3200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump 2 × 7.5 kW (optional) Software UCanCAM V13 (Polish language version, optional) Machine Dimensions 4070 × 2870 × 1900 mm Machine Weight 2050 kg

Condition: good (used), Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery but can be purchased in another auction at this link. Lot of Milling Tools The universal milling machine Deckel FP 2 LB is characterized by its extremely stable base and is designed as a floor-standing machine. This means that the machine retains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. Furthermore, the long travel of 800 mm is advantageous in this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital display: 3-axis digital display Heidenhain Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 clamping thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of steps: 18 Table type: universal swivel/tilt table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vise 160 mm Hfjdpsgyw S Tsfx Ab Usn Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), FORMAT 4 Tempora 60.06 edge banding machine with glueBox – used Touchscreen, swiveling control panel, program memory, automatic adjustment of pressure beams, feed via transport chain, extendable workpiece support, diamond flush-trim cutter with both forward and reverse rotation, glue reservoir located underneath, changeover device for glue reservoir, use of PUR adhesives possible, GLUEBOX, pressure unit with driven roller, miter saw with 2 HF motors, miter saw pneumatically swiveling, flush/radius trimming unit, motorized positioning control for trimming unit, x-motion PLUS, corner copying unit with diamond-coated cutter, radius trimming blade, radius trimming blade with motorized positioning, edge trimming blade, program-controlled edge trimming blade, infeed stop, spray system for release agent, spray system for lubricant, spray system for cleaning agent, year of manufacture 2022 ----- Technical data ----- Edge thickness, roll material: 0.4 - 3 mm, Edge thickness, strip material: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, min. workpiece length: 140 mm, Feed speed: 10 m/min, Screen diagonal: 15 inches, Dimensions of flush-trim cutter: D 80 x 64 mm, Power of flush-trim cutter: 1.1 kW, Power of miter saw: 0.35 kW, Power of trimming station: 0.75 kW, Hfsdpfxsu R S Nwo Ab Usn Dust extraction port Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Overall length: 4,872 mm, Dimensions (L x W x H): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - all settings checked - adjusted according to manufacturer's specifications - complete basic inspection - complete basic cleaning - electrical system checked - pneumatics checked - ready for immediate use