Vibrating table - automatic jogger

Polar RA-2

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, POLAR RA-2 automatic jogger with air discharge roller and pneumatic folding stops, year 2001. After the jogging process is completed, the air is expelled from the cutting layer. You can spread once or twice, whereby the pressing pressure for the first spreading operation is adjustable. With the table tilted, intermediate spreading is also possible. – Stainless steel plated table surface 72 x 87 cm – Minimum layer height: 30 mm – Maximum layer height: 165 mm – Table height: 860 – 950 mm – Compressed air requirement at 6–8 bar approx. 2L/min Kjdpfsx N Svvsx Akxolr

Condition: excellent (used), Year of construction: 2001, Offer consisting of: Akebono banding machine, clean and functional condition, available for inspection in the warehouse. Kedpfxswu R H Ro Akxelr

Condition: used, Year of construction: 1995, functionality: limited functionality, 2 x POLAR RA 2 jogger with air removal. Machine are for spare parts, one of the units is possible to fix. Kodpfx Aown Dcfjkxelr Machines without any damage only electrical problems. Price LOT Denmark for 2 x units euro 1500.00

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder • 5 station gathering track & chain • 4 feeders 370 • 1 cover folder feeder 1528 stitching unit • stitching unit 390 Kedped Eg Tusfx Akxjlr • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives

Condition: used, Head & Tail Banding Machine with Gauzing Station Kolbus HL Year 1970 Format / Size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Leistung / Speed up to 36 cycles/min. Bestehend aus / Consist of: 1) Anleimstation / Gluing Station 2) Kapitalband- und Hinterklebestation / Head and tail banding station 3) Andruckstation / Pressure station Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Klodev Ay Arspfx Akxor On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2021, condition: ready for operation (used), Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible. Klodow Tc R Rspfx Akxsr

Condition: excellent (used), Year of construction: 2010, with flap left & right, dimensions: approx. 1.660 x 1.250 mm Kjdjg Du H Hepfx Akxelr

Condition: new, Year of construction: 2025, PRESSING AND JOINT FORMING MACHINE MODEL; MAGRAF PK-50x40 PLUS YEAR; 2025 Hydraulic pressure; 4000kg Kedpfxjgnlvne Akxjlr

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Ksdpfexz Ewnjx Akxolr

Condition: used, Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, cutting width (max.): 800 mm, insertion depth: 800 mm, insertion height: 150 mm, cutting length (max.): 800 mm, overall weight: 500 kg, type of input current: three-phase, total width: 160 mm, total length: 200 mm, input voltage: 400 V, Equipment: documentation/manual, safety light barrier, The MOHR 80 cutter is engineered for single-shift operation and features a precise, gentle swing cut actuated hydraulically, allowing the dwell time of the knife at the lower dead point to be tailored to the material. The ultra-smooth stainless-steel table, fitted with air jets, makes material handling effortless. Clamping pressure is infinitely adjustable via a scaled rotary knob to accommodate a wide range of cutting materials. High-visibility LEDs clearly indicate the cutting line for the operator. Operation is carried out through an ergonomically positioned 18.5’’ touch-screen display. The machine can store up to 1,998 cutting programs for rapid recall and flexible adaptation of recurring sequences. Integrated into a digital workflow, cutting data can be received directly from pre-press into Compucut® in ppf- or jdf-format, which then automatically generates the appropriate cutting program. A barcode reader enables automatic program retrieval and execution, effectively reducing set-up times to nearly zero. Process visualization graphically displays material handling, significantly minimizing error risk. To further optimize cutting quality, the pre-clamping time can be adjusted based on the material being processed. Key features: - Barcode reader for automatic creation and loading of assigned cutting programs via Compucut® - Process visualization for graphical representation of material handling, minimizing error risk - Rigid machine frame engineered for optimal stability, maximizing absorption of cutting forces and ensuring superior cutting accuracy - Minimal maintenance requirements thanks to the use of advanced materials Technical specifications: - Cutting width: 800 mm (31.49 in) - Feeding depth: 800 mm (31.49 in) - Maximum feeding height: 100 mm (3.93 in) - Clamping pressure: minimum 180 daN (397 lbs), maximum 2,700 daN (5,953 lbs) Kodoxwnxgepfx Akxelr - Backgauge speed (return): up to 130 mm/sec (5.12 in/sec) - Minimum automatic cut without false plate: 15 mm (0.60 in) - Minimum automatic cut with false plate: 50 mm (1.96 in) - Dimensions (W × D × H): 1,430 × 1,970 × 1,500 mm (56.29 × 77.55 × 59.05 in)