Paper cutting machine

Perfecta PT10P

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Face grinding machine Year of manufacture: 1985 30 kW grinding motor Modicon control system Magnetic control, 6 stages Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Bedpfx Amjd E Np Eersdh Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Bjdpfsxlngasx Amrsdh Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: used, Year of construction: 1988, machine/vehicle number: 14068, Stapelwender / Pile Turner DOX 3000 MYear 1988 - Serial-No. 7356 Format / Size max. 720 x 1020mm Online-Video-Inspection by Skype-Video Bdjdpfoh Axkvox Amrsh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1994, functionality: fully functional, Used condition. Bdsdpexbpxisfx Amroh

Condition: reconditioned (used), Year of construction: 1996, machine/vehicle number: 6672311, BM5141 Polar Mohr stacking lift L-1000-W-6 => reconditioned for ergonomic working at user-friendly working height Technical data Tub size 1000 x 1450 mm Lift max. 850 mm Load capacity max. 1.000 kg A sensor controlled lifting of the material enables the operator to handle the material at an ergonomically favourable working height, placing it into an automatic jogger or directly into the cutting machine. The stacking lift can also be used for de-stacking the the cut-material. The material is lowered semi-automatically. This means that the process is started manually and stopped automatically. POLAR stacking lift need not be anchored to the floor and is therefore flexible in its deployment. Customer benefits: Bdsdpfx Astgupcomreh - The productivity of the cutting machine is increased by up to 10%, as the working height during loading/unloading remains constant - Lifting of heavy loads is minimised - The operator's performance curve remains constant - Occupational illnesses are significantly reduced

Year of construction: 2015, condition: used, workpiece diameter 300 mm workpiece weight 999 kg workpiece height 145 mm Features: -Digital display vertical axis -Automatic feed -Programmable automatic end stop -Grinding spindle drive with infinitely variable electronic speed control -Infinitely variable cross feed and table rotation -24V magnetic clamping plate 300 mm -Various occupational safety devices, e.g. protective cover monitoring, operating status display via traffic light Bjdpjxflclsfx Amrjdh -Lubricating oil level monitoring -The machine was completely overhauled in 2015, at which time the entire electrical system was replaced with PLC control and 24V control voltage -Paper belt filter system specially designed for this machine The following work has now been carried out: -Replacement of bellows and belts -New bearings for grinding spindle -Grinding carriage bed and rotary table bed scraped by hand to restore better and more precise running characteristics -Grinding carriage and cross table lifted from machine body and all tracks cleaned, lubrication checked -Various wear parts, such as rubber caps and switching elements, replaced -Detailed functional check -Modernisation of feed arm -Paint touch-up work, machine colour: light grey RAL 7035 and RAL 7012

Condition: new, Year of construction: 2026, ATTENTION: No machine is sold, only GRINDING WHEELS for these machine types: SCHNEEBERGER LEPUS, SCHNEEBERGER WSL and LAMELLO Lepus. Image 1 + 2 Pictures 3 - 5 are sample pictures for these machines dry & wet chisels u. Hand planer knife grinding machines Price per piece: Grinding wheel COARSE orange: EUR 75.- excl. VAT. & Shipment CHF 75.- excl. VAT. & Shipment Grinding wheel FEIN white: EUR 115.- excl. VAT. & Shipment Bdodpfx Amsfvzmyjrsh CHF 115.- excl. VAT. & Shipment Z.K .: Minimum purchase quantity 2 pieces per order. Your direct contact: Marc Brönnimann We sell grinding wheels for the following chisels and hand planer knives / sharpening machines: LEPUS, SCHNEEBERGER, LAMELLO, WSL, can be used wet & dry!

Year of construction: 1988, condition: used, machine/vehicle number: 8829-III, max. temperature: Vorwaerm-/Haertekammer 1000/1350 °C electrical connection: 380 V kW Bedpe Rxa Njfx Amrjdh dimensions of the machine: 1150 x 1500 x 1840 mm weight: gesamt ca. 900 kg heating capacity: Vorwaerm-/Haertekammer 9/25 kW

Year of construction: 1984, condition: used, Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm Bdedpsd Hp Tzsfx Amrsh -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Condition: used, Year of construction: 1998, machine/vehicle number: 7356, Stapelwender / Pile Turner Baumann BSW 2-500Year 1998 - Serial-No. 7356 Bogenformat / Sheet Size max. 550 x 750mm Stapelgewicht / loading capacity max. 500kgs Innenmaß Plattform / Interior platform size 620 x 940mm Öffnungsweite Plattform / Opening of platforms min. 460mm - max. 1220mm Online-Video-Inspection by Skype-Video Bedpsrw Dk Ssfx Amrodh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test