Suction lifter

Pannkoke 7001-AB

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 1600.4 Max. Glas-height: 1.600 mm Gbsdpfx Asvxf Uxsgbog Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: used, Year of construction: 2011, functionality: fully functional, working height: 2,000 mm, The line for 2 x 2.5 m (60 mm package thickness) consists of the following machines: LV-25/20 VSA Lisec I.G. Manufacturing Line (without Automated Super Spacer VSA + SSV printer) (or can be sold with super space station VAS and SSV printer) 2000x2500mm(78 "x98") 60mm thickness max 1020 VHW 20/8 washer 1030 RSV 1060 NLMD turning station 1070 NWLD-25/20 Turning Station / Rotating inclination changer with measuring unit Gbedpjrr Sy Aofx Agbsg 1080 FPS-25/20U2 gas press / surface press with gas filling bar 1090 RTVB-32/20ST 1100 APKV-3/20 cork applicator / spacer cork 1110 VFL-1/20D Sealing robot Incl. shapes + triple glass 2x 1120 DOS-1PUD Mixing incl. 2 x 200L + Hardener press 200l pasty 1125 KSE 1130 Safety fence Technical data: Min dimension : 350 x 180 mm Max dimension : 2000 x 2500 mm Total thickness ISO: 12 to 60 mm Glass thickness: 3 to 15 mm SDR: 12 to 18 mm Level: not possible, step nozzle is missing Georgian Bars: No Gas type: Argon Models: according to model catalog LIsec radius limit 250 mm Sealant: PU Technical data: Min dimension : 350 x 180 mm Max dimension: 2000 x 2500 mm Total thickness ISO: 12 to 60 mm Glass thickness: 3 to 15 mm SDR: 12 to 18 mm Step: not possible, step nozzle missing Sprouts: No Gas type: Argon Models: according to the LIsec model catalog radius limitation 250 mm The line for 2 x 2.5 m (60 mm package thickness) consists of the following machines: LV-25/20 VSA Lisec I.G. Manufacturing Line (without Automated Super Spacer VSA + SSV printer) (or can be sold with super space station VAS and SSV printer) 2000 x 2500 mm(78 "x 98") 60 mm thickness max 1020 VHW 20/8 washer 1030 RSV 1060 NLMD turning station 1070 NWLD-25/20 Turning Station / Drehbarer Neigungswechsler with messeinheit 1080 FPS-25/20U2 gas press / Surface press with gas filling bar 1090 RTVB-32/20ST 1100 APKV-3/20 Korckapplicator / Spacer cork 1110 VFL-1/20D Sealing robot IncL. Shapes + Tripple glass 2x 1120 DOS-1PUD Mixing inkcl. 2 x 200L + Harderner press 200l pasty 1125 KSE 1130 Safety fence Technical data: Min dimension: 350 x 180 mm Max dimension: 2000 x 2500 mm Total thickness ISO: 12 to 60 mm Glass thickness: 3 to 15 mm SZR: 12 to 18 mm Level: not possible, step nozzle is missing Gorgian Bars : No Gas type: Argon Models: according to model catalog LIsec radius limit 250 mm Sealant: PU Technical data: Min. dimensions: 350 x 180 mm Max. dimensions: 2000 x 2500 mm Total ISO thickness: 12 to 60 mm Glass thickness: 3 to 15 mm SZR: 12 to 18 mm Step: not possible, step nozzle missing Georgian bars: No Gas type: Argon Models: according to model catalog LIsec radius limitation 250 mm Sealant: PU

Condition: like new (used), functionality: fully functional, Hydraulic punching machine Brand: Boschert Model: Ecco Line EL 500 Digital Features: Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Gbsdpfxjrn Swke Agbsg Switch-on value: 5 kW Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Foot pedal Includes all the accessories shown in the pictures.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight Gbodsha E S Tepfx Agbsg The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Year of construction: 2015, condition: new, Hydraulic magnets are supplied with built-in magnet generator, so that only the hydraulic connection is required. ON/OFF switching and demagnetization are triggered by hydraulic flow. Gbjdpfx Agoc Spglebeg We have different sizes and capacities in stock NEW and USED

Condition: used, Year of construction: 2016, 8 spindle system. Connected loads: 380/400 V, 19 kW. Glass thickness: 3 - 25 mm. The system produces a beautiful glass finish. Gbjdpjv Rbtuofx Agbog Condition: in very good condition.

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice Godpfecuntzox Agbsbg - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Condition: good (used), Completely overhauled by us Glass grinding machine with 9 spindles for grinding and polishing • Year of manufacture: 2014 • Very good condition • Glass thickness: 3 – 25 mm • Minimum glass size: 80 x 80 mm • Machine length: 6470 mm • Machine height: 2610 mm • Machine depth: 1110 mm • Weight: approx. 2800 kg Gbjdpfx Agsu Sm H Hobjg • Price on request

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Gbedpjnr E Enofx Agbeg Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation.

Condition: used, mileage: 27,743 km, power: 470 kW (639.02 HP), first registration: 04/1980, fuel type: diesel, overall weight: 32,800 kg, axle configuration: > 3 axles, color: green, gearing type: semi-automatic, total width: 2,750 mm, total height: 3,450 mm, Subject to errors and prior sale! Internal number: 1247. 4300801---- EQUIPMENT * Chassis: Faun LF 40.30 x2/48V 8x8 * Engine type: B/F 8L 413F/W KHD (Deutz) V8 * Engine power: 2x 235 kW at 2,650 rpm * Torque: max. 1,000 Nm at 1,750 rpm * Engine layout: 2 rear engines * Gearbox: 3-speed ZF powershift transmission, electrically switched with brake freewheel, pump drive can be switched on and off under load * Displacement: 12,763 cm³ * Top speed: 95 km/h * Permissible total weight: 32,000 kg * Length: 11,060 mm * Width: 2,750 mm * Height: 3,340 mm * Structure: - Manufacturer: Saval-Kronenburg - Type: KD88F - Structure material: steel lattice tube structure clad with sheet steel - Water tank capacity / material: 8,100 l, polyester - Foam agent tank capacity / material: 900 l, polyester * Pump type: 2-stage centrifugal pump 54/8, via auxiliary drive * Pump output: 5,400 l/min at 8 bar Gbjdpfjh Tvntjx Agbog * Foam mixing system: SZM type. Injector type 450, mixing rate: 3 - 8% (infinitely variable) * Roof turret: Type: water-foam swivel pipe type 4000L, electro-hydraulic with synchronous control - Output: up to 4,000 l/min at 10 bar - Throwing distance: approx. 70 m - Turret equipment: partial quantity adjustment 2,000 / 4,000 l, full/spray jet adjustment, infinitely variable * Quick-attack devices: - Type: 2x HD water/foam reels, swivels out 90° - Hose length / DN: 30 m / 32 mm - Jet pipe type: HOENIG 200/480 * Piste foaming system: Type: 3-stage telescopic pipes, extendable - Output: 1,000 l/min at 7 bar - Foaming width: 10 m - Foaming length: approx. 600 m per tank filling * Self-protection system: 1x flat radiator 400 l/min - 2x floor spray nozzle 60 l/min * Power generator 5 KVA * Differential locks * Pump room heating * Equipment room heating * Extension ladder mounted under the structure, removable from the floor * Airfield spotlight 2,000 W * External power supply with breakaway plug for 230 V and much more ----The vehicle is unprocessed! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a deposit! Do you have any questions? We are happy to advise you!