Forklift

PALFINGER F3-203 GT-S*2t Mitnahmestapler*24,5kW*2.743h

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: electric, next inspection (TÜV): 10/2025, Year of construction: 2020, operating hours: 900 h, Equipment: UVV, crane, low noise, rubber tracks, tip top condition! Hodpfxevriuvj Apdew

Condition: new, fuel type: electric, color: red, operation weight: 4,700 kg, The brochure with the required information is attached. For more information, please contact our sales team: Hedew H Iyxspfx Apdjw

Condition: new, Fastech Horizontal Bandsaw, Semi-Automatic, BMSY 360 DGH ECO Round Cutting Capacity mm: 360 Flat Cutting Capacity mm: 510 x 360 Square Cutting Capacity mm: 360 +30° Round Cutting Capacity mm: 360 +30° Flat Cutting Capacity mm: 440 x 360 +30° Square Cutting Capacity mm: 360 +45° Round Cutting Capacity mm: 360 +45° Flat Cutting Capacity mm: 390 x 360 +45° Square Cutting Capacity mm: 360 +60° Round Cutting Capacity mm: 200 +60° Flat Cutting Capacity mm: 200 x 360 +60° Square Cutting Capacity mm: 200 -30° Round Cutting Capacity mm: 360 -30° Flat Cutting Capacity mm: 440 x 360 -30° Square Cutting Capacity mm: 360 -45° Round Cutting Capacity mm: 360 -45° Flat Cutting Capacity mm: 390 x 360 -45° Square Cutting Capacity mm: 360 -60° Round Cutting Capacity mm: 260 -60° Flat Cutting Capacity mm: 260 x 360 -60° Square Cutting Capacity mm: 260 Motor Power, Main Drive kW 3 Hydraulic Pump Power kW 0.37 Motor Power, Coolant Pump kW 0.12 Band Speed, stepless: m/min 20 - 100 Saw Band Dimensions mm: 4800 x 34 x 1.1 Height of Work Surface mm: 860 Weight kg: 1450 Length / Depth / Height mm: 2650 / 1210 / 1870 Double Miter Saw Stepless Band Speed Hydraulic Vise High-Performance Gearbox Hydromechanical Saw Band Tensioning Hedpfx Aeg Ekttjpdew Saw Band Brush Digital Display for Miter Angle

Condition: new, Year of construction: 2025, Mini Crane on a crawler chassis TB5000 JiB BEFARD TB 5000.JIB is an alternative to the basic version of TB 5000, thanks to the JIB arm it is more mobile and allows work in hard-to-reach places. TB 5000.JIB is equipped with an active arm, two hydraulic extensions of the main arm and two hydraulic extensions of the JIB. Standard features: * radio control of the device - driving, working, spreading the feet * double power supply of the crane - combustion and electric 230 V * anti-overload system as standard * maximum horizontal reach over 11 m * four hydraulic extensions + 1 manual extension Hedpfov I T T Ijx Apdsw * maximum vertical reach over 13 m * 4 hydraulically lowered supports * weight approx. 2200 kg * height approx. 195 cm * width approx. 88 cm * active arm Additional, optional equipment: * hydraulic winch 990 kg * Li-ion battery power supply * pads for support feet Available in the selected color.

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm Hodpjwkgq Rofx Apdow • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price

Condition: new, Year of construction: 2026, Assembly robot BEFARD XGR 800.3 Specification: * full remote control - both operation and drive of the device * three hydraulic extensions with a vertical range of 5.55 m * power supply by a combustion engine (optional additional power supply by a 230 V electric engine or Li-ion batteries) * possibility of simultaneous operation from the 230 V mains and battery charging (for the Li-ion version) * two-circuit vacuum system * maximum lifting capacity 800 kg * 8 vacuum suction cups * rotating frame with suction cups (hydraulically) - controlled by the remote control * lateral shift of the frame with suction cups (right, left 10 cm - hydraulically) * tilting frame with suction cups to the sides (relative to the device - manually or hydraulically) * tilting frame with suction cups (possibility of lifting the element from the horizontal plane and verticalizing it - hydraulically) * non-marking tracks * two working modes - fast and slow * color to choose from Optional additional equipment: * HS spacers Hodpfsibqr Tsx Apdjw * valves * frame tilt with suction cups (hydraulic - remote control) * forks * anti-overload system * hook * LED lamp * 230V wired power supply (for the combustion version). Other models available: XGR800.1 with one hydraulic extension, with a vertical reach of 3.9m XGR800.2 with two hydraulic extensions, with a vertical reach of 4.75m Gasoline engine - VANGUARD brand 10 HP / 5.5 KW

Condition: used, Year of construction: 2002, machine/vehicle number: 2204, Universal radius metal belt grinder lot no. 24541 Technical data: Hedpfx Asviudqopdjw - Sanding belt dimensions 2000 x 75 mm - Surface sanding opening 400 x 75 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Working height 960 mm - various sanding rollers Ø 25 , 30 , 39 , 45 , 57 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 125 kg

Condition: new, Year of construction: 2026, CORMAK STU75 Metal Belt Grinder The CORMAK STU75 Metal Belt Grinder is an industrial belt grinding machine designed for a wide range of metal finishing applications, including surface grinding, edge finishing, and processing cylindrical components such as pipes and tubes. Thanks to its powerful motor, two-speed belt operation, and carefully engineered working system, the STU75 provides high efficiency, precision, and reliability for everyday industrial use. Key Features Adjustable belt speed: 14.5 / 29 m/s – allows the grinding speed to be matched to the material type and required surface finish quality. Quick belt and abrasive tool replacement – reduces setup times and improves workstation productivity. Grinding head adjustable for vertical and horizontal operation – provides excellent flexibility and enables machining of various workpieces at the optimal angle. Pipe vise with 0–30° angle adjustment – allows precise angled grinding of cylindrical components, ideal for pipe preparation before welding. Complete set of pipe rollers for different diameters – enables quick setup for grinding pipes with diameters up to 60.3 mm. Heavy-duty vibration-damping construction – improves grinding accuracy and operator comfort during extended operation. Construction and Technology The CORMAK STU75 belt grinder has been designed for versatile operation in demanding industrial environments. Equipped with a Ø200 mm rubber-coated drive wheel and a 120 × 90 mm sliding support with rollers, the machine ensures smooth belt guidance and consistent contact between the abrasive belt and the workpiece. The integrated roller guidance system combined with a spring-loaded belt tensioning mechanism provides safe, stable, and smooth operation of the sanding belt. The rigid construction minimizes vibration, improving both machining accuracy and working comfort. Precision and Performance The combination of a wide 75 × 2000 mm abrasive belt and two selectable grinding speeds ensures excellent performance for both heavy stock removal and fine finishing operations. The adjustable pipe vise and dedicated roller set enable precise tube grinding with repeatable results and stable workpiece positioning. Hedpfx Aovu Ukzopdjw Applications The universal CORMAK STU75 Metal Belt Grinder is suitable for: Manufacturing handrails, balustrades, and steel pipe structures Edge and surface preparation before welding or painting Metalworking departments, tool rooms, and industrial service workshops Small and medium-sized production lines Standard Equipment Ø200 mm rubber-coated drive wheel Sliding support with 120 × 90 mm rollers Pipe grinding vise with 0–30° angle adjustment Roller set for pipe diameters: 20 mm 21.3 mm 26.9 mm 33.7 mm 42.4 mm 48.3 mm 60.3 mm Abrasive belt 75 × 2000 mm Technical Specifications Belt speed 14.5 / 29 m/s Abrasive belt dimensions 75 × 2000 mm Power supply 400 V Motor power 2.2 kW Weight 110 kg Maximum pipe grinding diameter 60.3 mm

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec Hsdpfx Apsupw Riedow tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V total power requirement 2,5 /3,3 kW weight of the machine ca. 0,19 t dimensions of the machine ca. 1,2 x 0,75 x 0,7 m

Condition: new, Bernardo Dual-Column Bandsaw MBS 300 DG-V PRO Technical Specifications Cutting capacity, round / square 90° 255 mm / 210 x 210 mm Cutting capacity, flat 90° 310 x 210 mm Cutting capacity, round / square 45° R 220 mm / 210 x 210 mm Cutting capacity, flat 45° R 220 x 200 mm Cutting capacity, round / square 45° L 230 mm / 200 x 200 mm Cutting capacity, flat 45° L 230 x 200 mm Cutting capacity, round / square 60° R 135 mm / 135 x 135 mm Cutting capacity, flat 60° R 135 x 135 mm Working height 930 mm Saw band dimensions 2750 x 27 x 0.9 mm Cutting speeds, infinitely variable 20 – 80 m/min Coolant pump 100 W Motor output power S1 100% 1.5 kW Motor input power S6 40% 2.2 kW Voltage 400 V Machine dimensions (L x W x H) 2000 x 1250 x 1900 mm Weight approx. 350 kg Scope of supply • Saw band • Workpiece stop • Base frame • Manometer for band tension Hodpfx Aped Hzbwjdow • Saw band guide with carbide inserts • Quick-release vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off