Used Multi-Trans Pa65-2 for sale (81,837)

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Hfjdpfjuf Rw Tex Agtsl Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: Hjdpfx Asxrtlujgtsfl unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: ready for operation (used), Heavy-duty trailer / industrial trailer Multitrans VAL 725 – 20 t payload – Year of manufacture 2010 For sale is a heavy-duty trailer / industrial trailer from the brand Multitrans, model VAL 725, with a payload of 20,000 kg. The trailer is in good used condition overall. There are signs of wear and tear consistent with age and use. The exact visual condition can be seen in the attached pictures. Technical data * Manufacturer: Multitrans * Model / Type: VAL 725 * Year of manufacture: 2010 * Design: Heavy-duty trailer / industrial trailer * Payload: 20,000 kg * Tare weight: 3,450 kg * Permissible total weight: 23,450 kg * Permissible axle load, front: 11,800 kg * Permissible axle load, rear: 11,800 kg * Loading area length: approx. 6,000 mm Hedpfx Aezxgm Sogtofl * Loading area width: approx. 2,200 mm * Height: approx. 750 mm * Vehicle identification number: 15620/001 Condition The heavy-duty trailer is used and in good condition overall. Normal signs of wear and tear are present. Condition and visual appearance, see pictures. Due to its high payload capacity, the Multitrans VAL 725 is ideally suited for the internal transport of heavy machinery, equipment and other loads. An inspection is possible after prior arrangement. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, load capacity: 25,000 kg, Equipment: UVV, - Towing capacity: maximum 25,000 kg - Bed size: 1,955 x 1,170 (1,120 at the rear) - Bed height: 1,000 mm - Drive: 2 x 10 kW electric motor, 80 V / 930 Ah - Features: optimal maneuverability, robust and reliable Hjdezmttbopfx Agtefl

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 197 h, load capacity: 40,000 kg, fuel type: electric, battery model: EPzS, battery capacity: 1,250 Ah, battery voltage: 80 V, overall weight: 53,500 kg, empty load weight: 13,500 kg, total height: 2,750 mm, total length: 8,210 mm, total width: 2,500 mm, color: grey, Equipment: CE marking, UVV, air conditioning, cabin, lighting, with TÜV inspection report for obtaining an exemption permit according to § 70 of the StVZO (Road Traffic Licensing Regulations) for use on public roads. Current battery condition reports from July 31, 2026. Hodpfeyrf Uiox Agtofl Loading area: clear loading area behind the cabin approx. 6660 x 2490 mm Loading height: approx. 1000 mm Loading area cover: diamond-patterned sheet metal Steering: two-axle steering Driving hours: 197 Battery: 2 units (exchange battery) 80 V 10 EPzS 1250 Ah, K5 Technical condition: very good Optical condition: very good Operating conditions: level, paved road in internal traffic 90° curve from 4800 mm to 4800 mm road width, inner corner approx. 1200 x 1200 mm beveled, theoretically possible to navigate with approx. 50 mm clearance to the driving width, practically not navigable gradient of approx. 5% over a length of approx. 10 m indoor and outdoor use with approx. 10 km total distance per day two-shift operation on 6 days a week Payload: 40 t at 6 km/h in internal factory traffic Load distribution front and rear approx. 70:30 Loading area: External dimensions of the vehicle approx. 8200 x 2500 mm clear loading area behind the cabin approx. 6660 x 2490 mm Loading height approx. 1000 mm Loading area with diamond-patterned sheet metal cover Chassis: two steered axle lines with two swing axles each, and two non-steered, driven axle lines mounted on four longitudinal rocker arms uniform wheel load distribution via swing axles or longitudinal rocker arms Drive wheels with track-free, elastic solid rubber tires approx. Dm 559 x 406 mm Wheels on the swing axles 457 x 304 (2×152) Wheel hubs with tapered roller bearing and permanent grease lubrication Drive and control: Wheel hub three-phase motors 80V approx. 4 x 6.4 KW with electronic differential function to which the drive wheels are mounted Driving speed adjustable continuously via foot pedal Dual AC pulse control system for drive and steering Control cabinet located on one longitudinal side of the platform truck Vehicle electrical system: entire vehicle electrical system (excluding 80V drive) designed for 24V via voltage converter Front headlights with rear and brake lights as well as turn signals. Reflectors mounted on the front, rear, and both longitudinal sides in accordance with StVZO. Battery and charger variant: for payload 25t + 12t self-weight = total weight 37t 7 – 8 h charging time Range per battery > 6,000 m 1200 charge cycles 1 x battery 80 V 10 EPzS 1250 Ah, K5 1 x exchange battery 80 V 10 EPzS 1250 Ah, K5 stationary charger D 80/180 Electrolyte circulation Aquamatik Additional equipment: behind the cabin on the left longitudinal side in the direction of travel, an access to the loading area, a pluggable or fixed handrail, storage space for the non-plugged handrail attached to the vehicle a 300 mm high stop bar attached to the front end the vehicle can be maneuvered from the cabin or via a radio-controlled hand-held remote control outside the cabin on both longitudinal sides, 9 lashing eyes/crane bars made of round steel are welded horizontally into the outer supports Ultrasonic sensors for distance measurement (object detection, not a personal protection device), creep speed and emergency stop shutdown variably adjustable. Rear view camera system with screen Safety devices: 2 emergency stop buttons on the rear

Condition: ready for operation (used), Heavy-duty trailer / industrial trailer Multitrans ARL-4PA-1550 – 50 t payload – Year of manufacture 2009 Hfsdpfx Agszxgq Rstjl For sale is a heavy-duty trailer / industrial trailer from the brand Multitrans, model ARL-4PA-1550, with a payload of 50,000 kg. The trailer is overall in good used condition. Age-related and usage-related signs of wear are present. The exact visual condition can be seen in the attached pictures. Technical data * Manufacturer: Multitrans * Model / Type: ARL-4PA-1550 * Year of manufacture: 2009 * Design: Heavy-duty trailer / industrial trailer * Payload: 50,000 kg * Tare weight: approx. 12,000 kg * Loading area length: approx. 8,000 mm * Loading area width: approx. 3,000 mm * Loading height: approx. 60 mm * Loading area surface: Pine wood covering and 8 mm tear plate * Vehicle identification number: 15462/001 Condition The heavy-duty trailer is used and is overall in good condition. Normal signs of wear and tear are present. Condition and visual appearance can be seen in the pictures. With a payload of 50 tons and a loading area of approx. 8,000 × 3,000 mm, the trailer is ideal for the internal transport of heavy machinery, equipment and other heavy loads. The robust loading area structure with pine wood covering and 8 mm tear plate offers a durable and practical loading area for industrial use. Inspection is possible by prior arrangement. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: ready for operation (used), machine/vehicle number: 15466/002, empty load weight: 1,250 kg, maximum load weight: 5,000 kg, overall weight: 6,250 kg, Year of construction: 2009, Heavy-duty trailer / industrial trailer Multitrans VAL 16 – 5 t payload – Year of manufacture 2009 For sale is a heavy-duty trailer / industrial trailer from the brand Multitrans, model VAL 16, with a payload of 5,000 kg. The trailer is in good used condition overall. Signs of wear and tear consistent with age and use are present. The exact visual condition can be seen in the attached pictures. Technical data * Manufacturer: Multitrans * Model: VAL 16 * Year of manufacture: 2009 * Type: Heavy-duty trailer / industrial trailer * Payload: 5,000 kg * Tare weight: 1,250 kg * Permissible total weight: 6,250 kg * Permissible front axle load: 3,200 kg * Permissible rear axle load: 3,200 kg * Loading area length: approx. 5,000 mm * Loading area width: approx. 2,000 mm * Height: approx. 560 mm * Vehicle identification number: 15466/002 Condition The heavy-duty trailer is used and in good condition overall. Normal signs of wear and tear are present. Condition and visual appearance can be seen in the pictures. The trailer is ideal for internal transport of machines, equipment and other heavy loads. Hfedpfx Ajzxggxegtol An inspection is possible after prior arrangement. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: excellent (used), total length: 4,100 mm, total width: 2,100 mm, total height: 560 mm, color: blue, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved roadways in internal company transport operations. Payload: 6 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Main Frame: Hodpfxoxrtgfj Agtjfl Robust welded construction made of profile steel sections. Loading Area: Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, equipped with phenolic resin-coated plywood panels. Bumpers at the ends of the frame. Steering: Four-wheel pivot steering, drawbar tiltable, non-reversible, and non-removable. Drawbar automatic safety lock according to UVV regulations. Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with tapered roller bearing and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Miscellaneous: - Collision guards at the frame ends made of drop-shaped half-shells. - All-round anti-slip protection, approx. 25 mm high. - Side underrun protection at the height of the diagonal bar. - Pin coupling with captive bolt, bolt with spring safety, diameter 30 mm at the rear end. - Double-acting wheel chock with chain. - Two rear reflectors at the rear end. - Prepared for roof structure.

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 670 mm, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved surfaces in internal company transport. Combined Operation: The trailer components are not (without a trailer coupling) designed for combined operation with multiple trailers. Payload: 16 t at 6 km/h with evenly distributed loading (area load) of the loading platform between the axles. Point or line loads are only permitted upon notification. Loading Platform: Approx. 6000 x 2400 mm, loading height approx. 670 mm, platform covering made of softwood planks, all-round edge protection. Steering: Four-wheel stub-axle steering, drawbar tiltable, removable, and can be repositioned from front to back, coupling height at the towing vehicle approx. 320 mm (other coupling heights only permitted upon notification), towing eye according to DIN 74054, diameter 40 mm, drawbar drop protection according to UVV. Chassis: Both axles steered, solid rubber elastic tyres approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Hjdpfx Ajxrtdqegtsfl Paintwork: Topcoat RAL 5002 Ultramarine Blue. Optional Equipment: - 2 lashing rods made of round steel welded vertically into the outer frame on each long side - Double-acting wheel chock with holder and chain

Condition: excellent (used), total length: 10,000 mm, total width: 2,400 mm, total height: 975 mm, color: blue, Operating conditions: The trailer is designed for use on flat, paved surfaces in in-plant traffic. Hsdsxrtkwspfx Agtsfl Combined operation: The trailer components are not (without a coupling) designed for combined operation with multiple trailers. Payload: 32 t at 6 km/h with evenly distributed load (surface load) between the axles. Point or line loads are permissible only upon prior approval. Loading platform: Dimensions approx. 10,000×2,400 mm, loading height approx. 975 mm, platform surface covered with softwood planks, all-around edge protection. Steering: Front turntable steering, tow bar can be raised and detached, coupling height on towing vehicle approx. 350–500 mm, towing eye according to DIN 74054, diameter 40 mm, tow bar fall protection as per accident prevention regulations (UVV). Chassis: 2 steered and 2 rigid pendulum axles, wheels with elastic solid rubber tires approx. 450 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue. Additional equipment: On each long side, 2 horizontal round steel lashing sleeves welded into the outer frame.

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: Hfjdsxrtb Nopfx Agtel The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Condition: like new (used), total length: 4,000 mm, total width: 2,500 mm, total height: 665 mm, color: blue, Operating conditions: The trailer is designed for use on level, paved surfaces in internal company transport. The trailer components are not designed for combined operation with multiple trailers in a train. Payload: 10 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or strip loads are only permissible upon prior notification. Loading area: Hsdpfx Agjxrtqwotofl Dimensions approx. 4000×2500 mm, loading height approx. 665 mm, loading surface covered with softwood planks, all-round edge protection. Main frame: Robust welded construction made of profile steel sections. Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and swapped from front to rear. Coupling height at towing vehicle approx. 350–600 mm (other coupling heights only permissible upon prior notification), towing eye according to DIN 74054, Ø 40 mm, drawbar drop guard according to accident prevention regulations (UVV). Running gear: Both axles steered, super-elastic tyres 21×8-9 (approx. 517×186 mm), wheel hubs with tapered roller bearings and lifetime lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue

Condition: excellent (used), functionality: fully functional, load capacity: 60,000 kg, Equipment: UVV, cabin, Rental and purchase possible Hfodpfxsyrf T Eo Agtol

Condition: new, functionality: fully functional, machine/vehicle number: NEW-23, empty load weight: 651 kg, maximum load weight: 2,849 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,040 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 406 204 3500 2 NEW VEHICLE Internal dimensions: 406cm x 204cm Side wall height: 35cm Loading bed height: 66cm Gross vehicle weight: 3,500kg Payload: 2,849kg Braked tandem trailer Overrun brake and handbrake by AL-KO Maximum capacity axles and brakes Low chassis Fully welded, hot-dip galvanized steel frame 35cm high aluminum profile drop sides with tension latches Side walls fold down and are fully removable on all sides 15mm thick, slip-resistant, durable phenolic plywood floor Automatic jockey wheel with 400kg load capacity 8 noise-reducing lashing rings, each rated at 800kg tensile strength Reinforced 13'' C-specification tires with steel valves M+S tires Net/rope hooks on frame 13-pin electrical connector Front LED marker lights Rear lamps with reversing light, rear fog lamp (NSL), and triangular reflectors OPTIONAL ACCESSORIES: PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with bracket - Without side walls (discounted) - AL-KO cable winch 12.5m - Black Edition (powder-coated black side walls and rims) - Integrated ramps, 2800kg - Steel checker plate overlay for the floor - Full LED lighting - Anti-theft lock - Fine-meshed or coarse-meshed net - H-frame - Mesh extension sides, various heights, also closed version - Additional side walls 30cm with tension latches - Flat tarpaulin with or without bows - High tarpaulin, 180cm or 200cm Further accessories available on request! Plus delivery to Gera and vehicle documents: €200 net Pictures are for illustration only and may include optional extras subject to surcharge. Have you not found the right trailer yet? We always have 50–100 vehicles in stock ready for immediate collection. Hfsdpfx Ajrk Iwnsgtel Our workshop is open Monday to Friday, 8:00–17:00, for all kinds of repairs. Specialist in axle repairs, also for caravans. Wide range of rental trailers available. Additionally, we offer a large selection of spare parts and accessories for trailers of all brands. Get advice by phone, visit our website, or come by in person.

Condition: excellent (used), CATALOG NUMBER: 7949 Technical data: - Track width: 380 mm Hedezkuawepfx Agtefl - Shaft width: 420 mm - Max saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max cutting height: 120 mm - Table width with clearance: 1060 mm - Table length: 2050 mm – Top section: - Pawl/anti-kickback row - Metal pressure roller - Kickback fingers - 2 metal feed rollers - Hold-down clamp - Saw shaft - 3 metal pressure feed rollers – Bottom section: - Guide - Kickback fingers - Track - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 30 kW - Centralized track lubrication - Extraction outlet diameter: 250 mm - Roller tables: 2 pcs 1st table length: 3500/800 mm 2nd table length: 2550/800 mm - Roller width: 700 mm - Table height: 950 mm - Overall dimensions (LxWxH): 2950 x 2000 x 2000 mm - Weight: approx. 3000 kg Advantages: - Made in Germany - 2 roller tables - Used multirip saw - Very good condition Net price: 32,900 PLN Net price: 7,833 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 2,600 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2020 ISO 3A (51 cm) Capacity 2600 kg Hedpfsz Amqfjx Agtofl Side shift Opening range 560-1960 mm Width 1200 mm Fork length 1200 mm Load stabilizer ID OS2111

Condition: used, functionality: fully functional, load capacity: 2,600 kg, Double pallet fork Hfjdpoz Ampuefx Agtsl ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 3A (51 cm) Capacity 2600 kg Side shift Opening range 560-1960 mm Width 1200 mm Fork length 1200 mm ID OS2104

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,500 kg, Double pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2018 ISO 3A (51 cm) Capacity 2500 kg Side shift Opening range 560-1960 mm Width 1200 mm Fork length 1150 mm ID OS2101 Hfsdpfxjz Amphe Agtol

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 2,500 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2021 ISO 3A (51 cm) Capacity 2500 kg Hfedozz Ebyopfx Agtol Side shift Opening range 560-1960 mm Width 1250 mm Fork length 1200 mm ID OS2100

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 2,500 kg, Double pallet fork Hfodpfezz Ebtex Agtol ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2020, ISO 2A (41 cm), Capacity 2500 kg, Sideshift, Opening range 560-1940 mm, Width 1200 mm, Forks 2400 mm, ID OS2099

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 2,500 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Hedpezz Ebmjfx Agtjfl Technical condition: good Description: Year 2021 ISO 3A (51 cm) Capacity 2500 kg Side shift Opening range 580-1960 mm Width 1250 mm Fork length 1200 mm ID OS2098

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 2,200 kg, Double pallet fork ISO class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Hedpfx Agszz Eavotsfl Year 2017 ISO 2A (41 cm) Capacity 2200 kg Side shift Opening range 560-1940 mm Width 1200 mm Fork length 1200 mm ID OS2087

Condition: used, functionality: fully functional, Year of construction: 2022, load capacity: 2,200 kg, Double pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2022, ISO 2A (41 cm), Capacity 2200 kg, Sideshift, Opening range 560-1960 mm, Width 1200 mm, Forks 1100 mm, ID OS2085 Hedpfjzz Eaijx Agtjfl

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 2,600 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Hsdpfx Agszz D U Sjtjfl Description: Year 2020 ISO 3A (51 cm) Capacity 2600 kg Side shift Opening range 560-1940 mm Width 1200 mm Fork length 1200 mm ID OS2082

Condition: used, mileage: 573,000 km, first registration: 12/2019, fuel type: diesel, fuel: diesel, Year of construction: 2019, 2 x DAF XF106 450 SSC BDF swap body vehicles with hydraulic lifting frame VANTEC • VANTEC hydraulic lifting frame / multi-changer system • Emission standard: EURO 6 D • Intarder • Axle configuration: 6x2 • Lift / steering axle (3rd axle) • Automatic climate control • Stationary air conditioning • Auxiliary heating • Automatic transmission • Differential lock • Adaptive cruise control • Lane departure warning system • Emergency brake assist • Hill start assist Hfsdpjwmplcjfx Agtol • Multifunction steering wheel • Refrigerator • Airbag • Radio-CD player • 2 bunks • Gross vehicle weight: 26,000 kg • Unladen weight: 10,220 kg • Wheelbase: 4,600 mm • Parking height: 1,020 - 1,320 mm • Suitable for swap bodies of 7,150 and 7,450 mm • Frame length (rear wall of cab to end of vehicle frame): 7,040 mm • Tyres: 315/60 R22.5 • Tread depth: 11/12 9/9/11/11 13/13 mm - very good! - German vehicles! - 1st owner! - General inspection / emissions test and safety test can be done new on request for an additional fee! Errors and prior sale excepted!