Used Zero Point for sale (8,266)

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. Ltjdpswz Ry Defx Affja The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: good (used), Year of construction: 2015, Energy Saving Refrigerant Dryer Ledpeg A Hcxsfx Affeta Build in 2015 Pressure 14 bar

Condition: used, Year of construction: 1986, tube diameter 4-20 mm wall strength 2 mm Ltsdpjwbi Hcsfx Affoa bending radius min. 10 mm bending radius max. 75 mm bending speed 35 mm/min pull up length of tube 2000 mm total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions ca. 3100x1000x1400 mm

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, The machine was originally built in 1996. Originally overhauled by the manufacturer in 2011 for approximately €250,000: electrical and mechanical components completely renewed. TECHNICAL DETAILS Pipe diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Pipe length: 1,500 mm Bending angle: max. 180° + springback Pipe length: 400 - 1,500 mm Pipe outer diameter: 28 mm - 60 mm Material parameters Tensile strength of stainless steel: max. 750 N/mm² Tensile strength of mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Travel movements Bending direction: left Bending speed (forward travel): max. 22.0 rpm (infinitely adjustable) Bending speed (reverse travel): constant 22.0 1/min Twisting angle: max. 360° Twisting speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Stop time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic filling volume: 340 l Control system Ltsdpfx Afowlpt Dofoa Bending levels: up to 6 (CNC-programmable) Positioning device: NTB version Control unit: Schwarze-Robitec operating and control panel EQUIPMENT - Automatic cold pipe bending machine - Pipe positioning device - Gripper - Schwarze-Robitec pipe magazine - Hydraulic operation for bending table, tool clamping, slide rail, mandrel retraction, reinforced slide rail feed and retraction - Various bending tools for Ø 60 mm pipe - Various auxiliary tools - Cooling unit for control cabinet - Foot control (2-way) - Schwarze-Robitec control panel - Cooling unit for control cabinet Rittal type SK 3361100 Note: Due to a lack of operating knowledge, the machine could only be tested in setup mode. No errors are known.

Condition: used, functionality: unexamined, Ferwood Code: RU0008928 - Manufacturer Code: 631417200 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ljdpsv Hpyhjfx Affota

Condition: used, year of last overhaul: 2017, Machine type: Tube pointing hammer machine (cold pointing) Tooling: 4 hammer jaws, hydraulically or pneumatically driven, acting simultaneously on the tube end. Application: Preparation of steel, stainless steel, or non-ferrous tubes for cold drawing. Scope of delivery: AVS 63 pointing machine Pipe separation All available documentation Lsdpoxydwqofx Affjta

Condition: used, Year of construction: 1990, Folding tap pointer . tube diameter 5 - 20 mm tag length 50 - 100 mm total wight 1,4 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Lodpeit Ewfefx Affeta Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1992, functionality: fully functional, BOBST Domino 72 Folder Gluer for sale! Year 1992 Cold glue system ERO with 2 glue guns Max width 720mm Min width 126mm Max speed 400m/min Compact cardboard up to 600g/m². Automatic bottom system Ltedexlki Rjpfx Affja Counter ejector

Year of construction: 1986, condition: like new (used), More information on request Ltsdpfohmfnhjx Affoa

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: M04I/9012, Offer Number: M04I/9012 Machinetype: pointing machine Info: vibratory feeder Make: HILGELAND Type: SKM 08 Lsdpfx Aswzkn Ioffsta Constr. year: 2011 diameter range: 2-8 mm shaft length under head: 150 mm output pieces/min: 70-300 Location: Germany

Condition: used, functionality: unexamined, Ferwood Code: RU0008927 - Manufacturer Code: 631417600 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ltedpfx Asv Hpx Deffea

Condition: used, Bar pointing/chamfering machine PAREX Ljdsxdnwpepfx Affsta

Year of construction: 2025, condition: new, This 4-side -pointer was designed mainly for small and medium quantities with manual feeding. The machine has the following performance. As a drive type for the hydraulic pump, the machine is optionally supplied with a 7.5 kW electric motor or with connection for a cardan shaft. Sometimes it can be very simple: the mechanical sharpening machine has been specially designed for fast and practical feeding under manual feeding. It is therefore perfect for producing small and medium quantities of fence elements, wooden posts and palisades. Ideal for flexible landscaping or hastily planned timber construction. It can process any type of milled and peeled wood. Even curved weak wood, or logs with bark are no problem for the sharp knives. Maximum log diameter 270 mm Shortest lenght of log 1,15 m 5 pointing angles adjustable For rounded, peeled and unmachined logs Capacity 150 to 250 poles/houre Cylinder force 2 x 10 to Oilpressure 200 bar Power unit Electro motor 7,5 kW Lodpfx Aofw A D Neffeta PTO drive Tractor pump

Year of construction: 2004, condition: excellent (used), Type: HRA4/80-4 Pipes: Ø 6 ÷ 24 mm, wall thickness = 1 ÷ 2,5 mm • Point: Ø3 ÷ 12 mm Ljdpohmfh Hefx Affota

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: M04L/4099, Offer Number: M04L/4099 Machinetype: pointing machine Make: HILGELAND Type: PN1 Ltsdpfjwi Tcdjx Affoa Constr. year: 1968 diameter range: 2-6 mm shaft length under head: 5-50 mm output pieces/min: 180 Location: In our warehouse

Condition: used, functionality: unexamined, Ferwood Code: RU0008930 - Manufacturer Code: 6714A1830 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Lsdpfx Afsv Hpzfjfjta

Condition: new, Year of construction: 2025, Simply top - and practically as if by itself Lodpfjhm S Ruox Affota The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Behind this is a sophisticated system that allows all production steps to be carried out with maximum precision at maximum speed. Perfect for all logs that are already milled and/or peeled and waiting for their final shape as posts, poles or palisades. Simply point - and practically by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Both models allow three process steps - coping, pointing and chamfering - to be carried out fully automatically at the same time. Without slowing down the production flow: For example, the single-length machine can handle up to 4,000 wood piles and more in single-shift operation. The powerful geared motors run up to top performance via frequency converters - for maximum speed in cutting and cycle time optimization. This has a particularly positive effect when handling different diameters: the processing speed can be easily adapted to the logs.

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M04L/5692, Offer Number: M04L/5692 Machinetype: pointing and pincing machine Make: INGRAMATIC Type: PA2 Constr. year: 1976 diameter range: 1,7-6,4 mm shaft length under head: 4,5-75 mm output pieces/min: 1000 Location: In our warehouse Ltedewi Tb Hjpfx Affsa

Condition: used, functionality: unexamined, Ferwood Code: RU0008934 - Manufacturer Code: 631417100 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ltjdpjv Hp Dasfx Affoa

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M04L/6382, Offer Number: M04L/6382 Machinetype: pointing and pincing machine Make: INGRAMATIC Ledpfx Afewi Tbmjfeta Type: PA3 Constr. year: 1977 diameter range: 4-8 mm shaft length under head: 40-110 mm output pieces/min: 600 Location: In our warehouse

Condition: used, functionality: unexamined, Ferwood Code: RU0008929 - Manufacturer Code: 631417500 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Lsdpfxsv Hpyzj Affsta

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: M04L/7486, Offer Number: M04L/7486 Machinetype: pointing machine Make: PELTZER-EHLERS Type: NBAM-16 Ltedpfx Afjwi S T Iefea Constr. year: 1975 diameter range: 16 mm shaft length under head: 25 -160 mm output pieces/min: 110 Location: In our warehouse

Condition: used, functionality: unexamined, Ferwood Code: RU0008931 - Manufacturer Code: 6714A1831 - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Ltodpfxsv Hpz Ss Affoa

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M04L/8411, Offer Number: M04L/8411 Machinetype: pointing machine Info: vibratory feeder Make: HILGELAND Type: PN4 Constr. year: 1985 diameter range: 6-12 mm shaft length under head: 12-130 mm output pieces/min: 150 Ltodpfx Ajwi S Dmoffja Location: In our warehouse

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M04L/8429, Offer Number: M04L/8429 Machinetype: pointing machine Info: vibratory feeder Make: HILGELAND Type: PN6 Constr. year: 1970 Ltodpfowi S Dasx Affsa diameter range: 20 mm shaft length under head: 180 mm output pieces/min: 90 Location: In our warehouse