Used Z 5040 for sale (21,595)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Hessisch Lichtenau
18,422 km
L + Z lathe;
TONGIL- SAEILOTIPL-4SP
Call
Condition: used, L + Z Lathe TONGIL- SAEILO Type TIPL-4SP
Machine No. 00570319 Year of manufacture: 1985
Centre distance: 1000 mm
Swing over bed: 400 mm
Swing over cross slide: 210 mm
Centre height over bed: 200 mm
Centre height over cross slide: 105 mm
Spindle bore: 58 mm
Spindle speed: 55 - 1600 rpm, 16 steps
Feed: Longitudinal and cross
Tailstock taper: MT4
Chuck flange: Camlock, taper size 6
Motor power: 4 / 6 kW
Electrical connection: 380 Volt, 50 Hz
Itsdpfxsx Urbvs Ah Neb
- Spindle speed via 2 motor speeds and 8 gear stages
- 3-jaw scroll chuck RÖHM Ø 200 mm with stepped jaws
- Multifix quick-change tool post size B with 2 exchangeable tool holders
- Spindle brake via mechanical foot pedal
- Coolant system
- Emergency stop
- Machine lamp
Space required (L x W x H): 2250 x 1050 x 1220 mm
Weight: 1500 kg
Listing
Hamburg
18,230 km
CNC punch nibbling machine
BoschertTWIN 750 CNC/Z
Call
Condition: ready for operation (used), Year of construction: 2004, Immediately available from Swiss operation:
CNC Punch – Nibbling Machine Boschert
Type TWIN 750 CNC/Z
Year of manufacture: 2004
Working area: 810 x 1500 mm
Sheet length with repositioning up to 9999 mm
Iodpfeyayidox Ah Netb
Table: 750 x 3500 mm
Revotol 6
Hydraulic punching force: 28 tons
Max. workpiece weight: 200 kg
Strokes/min: 250
Strokes/min with fast cycling: 800
X-axis speed: 60 m/min
Y-axis speed: 30 m/min
Simultaneous X & Y-axis speed: 67 m/min
Trumpf tooling
Accuracy: plus/minus 0.05 mm
Connection: 4.8 / 11 kW
Complete tooling included
Weight: 11.5 tons
Price: EUR 9,000.– plus VAT ex location
Listing
Teutschenthal
18,284 km
Telescopic work platform
GenieZ-45/25J RT
Call
Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 2,446 h, load capacity: 227 kg, lifting height: 16,050 mm, fuel type: diesel, color: blue,

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Clickout
Eslarn
18,357 km
Vertical machining center
KunzmannB 1000 - 810 Z Vario
Condition: used, Year of construction: 2012, 1 unit universal milling machine, manufacturer Kunzmann, model B 1000 - 810 Z Vario, year 2012, serial no. 101166, machine weight 10,100 kg, XYZ travel – 1,020 x 620 x 810 mm, control unit Heidenhain iTNC 530, recorded operating hours 26,337, program run time 22 h, spindle run time 21 h, Heidenhain HR 410 electronic handwheel, TS 640 probe, Renishaw laser control system, milling table approx. 1,200 x 600 mm, 6 T-slots, 32-position ATC, chip conveyor by Mayfran BA 800/1000, band filter system, internal no. 11
Category: Machinery and Technical Equipment
Ijdpfx Asyaw Iwoh Njtb
Sale subject to reservation:
The sale of this item is subject to reservation and independent of the achievement of the minimum price. A decision regarding the acceptance of the bid will be made as soon as possible.
Listing
Nattheim
18,550 km
CNC machining center
SCMTECH Z 25
Call
Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center
Itjdjx Twdyjpfx Ah Nob
Listing
Deinze
18,734 km
Vertical machining centers
BretonXceeder 900 X: 900 - Y: 900 - Z: 600 mm CNC
Call
Condition: ready for operation (used), travel distance Z-axis: 600 mm, feed length X-axis: 900 mm, feed length Y-axis: 900 mm, controller manufacturer: Siemens Sinumerik 840D SL, total height: 3,415 mm, total length: 4,655 mm, total width: 5,890 mm, empty load weight: 16,500 kg, rotational speed of tool magazine (max.): 40,000 rpm, Type: XCEEDER 900/RT
XCEEDER is een 5-assig geïnterpoleerd bewegend bewerkingscentrum voor hogesnelheidsfreesbewerkingen. Speciaal ontworpen voor toepassingen van complexe tandwielen en waaiers tot mallen, matrijzen en gereedschappen, voor projecten in de lucht- en ruimtevaart, automobielindustrie en energieopwekking.
- Maximale werkstukdiameter: 900 mm
- Maximale afstand tussen spindel en tafel: 700 mm
- Hydraulische klemming op tafel
- A-as: -30° / 110°
- C-as: continu
- max. koppel op de spindel: 18/16 Nm
- Gereedschapswisselaar met 150 posities
Itedpfx Aex Twa Ioh Nob
Opties die op deze machine worden gemonteerd:
1 - 40.000 tpm hogesnelheidsspindel
2 - tafel dia 700 mm met hydraulische klemming
Gereedschapswisselaar met 3-150 posities
4 - spaantransportband
5 - koelsysteem met terugwinning
6 - Koelvloeistoftemperatuurregeling
7 - hoge drukkoeling (40 tot 70 bar) deurspindel
8 - rookafzuigsysteem
9 - chipverzamelbox
10 - Voorinstellingssysteem en gereedschapintegriteit: laser- en mechanische taster voor meetgereedschappen
11 - Renishaw-meetkop
Veel van de voordelen van de XCEEDER komen voort uit de kern van zijn structuur. Van een opmerkelijke winstmakerij, via het gietijzeren portaal, van alle trillende eigenschappen van "Metalquartz", Bretons gepatenteerde materiaal. Dit materiaal biedt een thermische inertie en is een effectief bestanddeel tegen bewerkingen, wat resulteert in zeer nauwkeurige en onverwachte reacties op het bewerkingsproces.
Table dimensions: dia 700 mm
Max weight on the table: 1000 kg
Admission in spindle (ISO): HSK-E40
Power on the spindle: 45/40 kW
Number of axes: 5 AXIS simultaneous
Toolchanger: yes
Number of toolholders: 150 positions
Listing
Schwebheim
18,473 km
Open trailer with tarp
AckermannZ-KA-F10.5/7,6 1 Achs Planenanhänger 10,5 t GG
Call
Condition: used, empty load weight: 4,060 kg, maximum load weight: 6,440 kg, overall weight: 10,500 kg, axle configuration: 1 axle, first registration: 01/2019, loading space length: 7,460 mm, loading space width: 2,480 mm, loading space height: 3,080 mm, loading space volume: 56 m³, suspension: air, tire size: 235/75R17,5 143/141L, color: other, gearing type: other, front tire size: 235/75R17,5 143/141L, rear tire size: 235/75R17,5 143/141L, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: !
Itsdox Tv Drjpfx Ah Nob
Listing
Schwebheim
18,473 km
Open trailer with tarp
AckermannZ-KA-F10.5/7,5 1 Achs Planenanhänger 10,5 t GG
Call
Condition: used, empty load weight: 4,060 kg, maximum load weight: 6,440 kg, overall weight: 10,500 kg, axle configuration: 1 axle, first registration: 01/2018, loading space length: 7,450 mm, loading space width: 2,480 mm, loading space height: 3,100 mm, loading space volume: 57 m³, suspension: air, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: !
Ijdpfx Aex Tv Dxeh Njtb
Listing
Triptis
18,329 km
Interchangable body
FlieglTWP 180 Mega Z
Call
Condition: new, machine/vehicle number: 65c7289da24c6dbb3dde7c971, empty load weight: 3 kg, maximum load weight: 14 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 265/70 r19,5, Further information
Chassis Wechel central axle trailer
Fine-grained steel welded construction
Front stop, longitudinally adjustable and foldable
Pair of removable guide rollers, front and rear
4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45
1 pair of gear support legs at the front, with straight lower section, support leg can be operated separately on the left and right
Wheel chocks with holder
Aluminum side bumper
Steel underride guard
Half-shell mudguards
Towing device central axle trailer
Tow bar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required in the event of an order)
Without length adjustment of drawbar
Axles + suspension
SAF disc brake axles
Axle/chassis laser-measured Reduction in tire wear and fuel consumption
Air suspension
Brake system
2-line compressed air brake systemColor-coded line routing for easy servicing.
Spring-applied parking brake
Duomatic connection at the front, with connection line to the engine trolley, connection in FR-right
EBS, electronic brake system with EBS plug at the front, with connecting cable, connection in FR right-hand side
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
with lifting & lowering valve
Wheels and tires
265/70 R19.5 tires of the manufacturer's choice
Ijdpfxji Rixce Ah Njtb
Steel rims in twin arrangement, factory silver
Electrical system
24 volt, multi-chamber lights, amber LED lighting at the sides
2 white position lights at the front
2 white/red lane departure lights at the rear
1 x 15-pin plug at the front, with connecting cable, connection in FR right-hand side
Additional LED work light(s) at the rear, switched via reversing light
LED work lights at the front, centered between the carriers, radiating to the rear, switched via reversing light
Operating instructions
The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution)
Country of registration / plates
Germany
with Dekra approval and expert opinion (according to §13 EG - FGV)
24/7 service hotline
Prepared for single-line license plate holder
Warning sign according to ECE - 70
Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear
Paint finish
Frame DB 7350 nova gray10-year warranty against rusting through
Attention: Archive pictures!
Listing
Triptis
18,329 km
Interchangable body
FlieglTWP 180 Jumbo Z mit Staplerhalterung
Call
Condition: new, machine/vehicle number: 207ad28f83705ed0d38a4f174, empty load weight: 3 kg, maximum load weight: 11 kg, overall weight: 14 kg, axle configuration: 2 axles, tire size: 235/75 r17,5, Further information
Chassis Wechel central axle trailer
Fine-grained steel welded construction
Front stop, longitudinally adjustable and foldable
Pair of removable guide rollers, front and rear
4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 flush with rear (for 7.15 swap bodies not flush with rear, forklift pockets/frame protrude)
Telescopic front support leg
1 pair of front gear support legs, with straight lower section and single-sided operation in FR right
Wheel chocks with holder
Aluminum side bumpers
Steel underride guard
Half-shell mudguards
Bracket for truck-mounted forklift at the rear, including 2 fork pockets, 2 extendable support tubes, bracket for chain safety device with pin. Underride guard with light unit can be folded away. Including 2 loose rubbers to protect the rear wall, we recommend counterweight! Partially low ground clearance with forklift, poor tracking behavior possible, without warranty! (Forklift tare weight up to max. 1500 kg for trailers). (With proximity switch for forklift control in conjunction with lift axle)The axles are shifted to the rear by the forklift bracket, observe load distribution when driving without forklift. Customer risk! (For swap body trailers, driving with a forklift is only permitted in conjunction with a swap body) Forklift bracket as AU 203670 adapted to 7.45 m swap bodies
Counterweight at the front between the frames, approx. 300 kg, if necessary, exact check still required
Towing device central axle trailer
Tow bar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required if ordered)
Lower coupler drawbar
without length adjustment drawbar
Axles + suspension
SAF drum brake axles of the manufacturer's choice
Axle/chassis laser-measured Reduction of tire wear and fuel consumption
Air suspension
Brake system
2-line compressed air brake systemColor-coded line routing for easy servicing.
Spring-applied parking brake
Duomatic connection at the front, with connection line to the engine trolley, in FR-left
Duomatic connection at the front, with connection line to the motor vehicle, connection in FR-right
EBS, electronic brake system with EBS plug at the front, with connecting cable, in FR-left
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
with lifting & lowering valve, holding function in each case in lowering / lifting position
Vehicle - driving stability system
Wheels and tires
235/75 R17.5 tires of the manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrical system
24 volt, 4 x 3 chamber lights + 1 round reversing light and + 1 round rear fog light, amber LED lighting on the side, lights mounted in a protected position!
2 white position lights at the front
Iodpfx Ahoi Ri Iao Netb
2 white/red rear lane departure lights
1 x 15-pin plug at the front, with connecting cable, in FR-left
2 x 7-pin sockets in FR left rear for truck-mounted forklift
1 x 15-pin socket in FR left rear for truck-mounted forklift
LED work lights on both sides behind the 2nd axle (switched via reversing light)
Additional LED work light(s) at the rear, switched via reversing light
Approval / plates
Germany
with Dekra approval and certificate (according to §13 EG - FGV)
24/7 service hotline
Prepared for single-line license plate holder
Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear
Paint finish
Frame
Listing
Triptis
18,329 km
Interchangable body
FlieglZWP 180 Jumbo Z
Call
Condition: new, machine/vehicle number: 06017a31026c05fc8f6ccf5ae, empty load weight: 3,055 kg, maximum load weight: 14,945 kg, overall weight: 18,000 kg, axle configuration: 2 axles, tire size: 235/75 r17,5, Further information
Chassis Changing turntable
Fine-grained steel welded construction
Front stop, longitudinally adjustable and foldable
Pair of removable guide rollers, front and rear
4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45
Turntable with sturdy ball bearing slewing ring
2 wheel chocks with holder
Aluminum side bumper
Steel underride guard
Quarter-shell mudguards at the front and half-shell mudguards at the rear
Towing equipment Trailer turntable
Drawbar with tested 40 mm drawbar eye
Axles + suspension
SAF drum brake axles
Axle/chassis laser-measured Reduction in tire wear and fuel consumption
Air suspension
Brake system
2-line compressed air brake systemColor-coded line routing for easy servicing.
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, with connecting lines to the motor vehicle,
EBS, electronic braking system with EBS plug at the front, with connecting cable,
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
with lifting & lowering valve, holding function in both lowering and lifting position
Wheels and tires
235/75 R17.5 tires of the manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrical system
24 volt, multi-chamber lights in LED with resistor, amber LED lighting at the side, license plate lighting in LED, (Note! with certain towing vehicles, misdiagnosis may occur although the function is given)
2 white front position lights in LED
2 white/red rear lane departure lights in LED
1 x 15-pin plug at the front, with connecting cable,
Itsdpoi Ri Rcjfx Ah Nsb
Additional LED work light(s) at the rear, switched via reversing light
Approval / plates
Germany
with Dekra approval and certificate (according to §13 EG - FGV)
24/7 service hotline
Prepared for single-line license plate holder
Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear
Paint finish
Frame DB 7350 nova gray
Attention: Archive pictures!
Listing
Triptis
18,329 km
Flatbed open
FlieglTPS 200 Jumbo Z
Call
Condition: used, machine/vehicle number: 7e3bf6da9bda95b470a3b0a97, empty load weight: 5,340 kg, maximum load weight: 12,660 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2021, tire size: 235/75 r17,5, Year of construction: 2021, Further information
Chassis central axle trailer
Fine-grained steel welded construction
Type TPS 200 (special approval required)
Front gear support leg
Itsdop N Dguopfx Ah Nsb
Folding rear support
Wheel chocks with holder
Aluminum side bumpers
Rear spray flaps across the entire width
Spray flaps in front of each axle and anti-spray flaps behind each axle
1x spare wheel holder for 1 e-wheel, with wheel mounting kit
1x spare wheel, same make as basic tires, steel rim
1x stainless steel storage box, w=600/h=400/t=500 mm, with polished door, lockable
Low loader lashing eyes
5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included)
7 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each
2 pairs of hinged lashing eyes additionally embedded in the low loading area, 10 tons each1 pair at the front and 1 pair at the rear slope
Central axle trailer towing device
Tow bar with tested 50 mm towing eye
Axles + suspension
SAF drum brake axles
Axle/chassis laser-measured Reduction of tire wear and fuel consumption
Axle spacing 1810 mm (then 10 tons axle load technical)
Air suspension
Brake system
2-line compressed air brake systemColor-coded cable routing for easy servicing.
Spring-loaded parking brake
Duomatic connection at the front, with connection line to the motor vehicle,
EBS, electronic brake system with EBS plug at the front, with connecting cable,
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
with lifting & lowering valve
Vehicle stability system
Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales)
Wheels and tires
235/75 R17.5 Fulda brand
Steel rims, factory silver
Electrical system
24 volt, multi-chamber lights, amber LED lighting at the sides
2 white position lights at the front
2 white/red rear lane departure lights
1 x 15-pin plug at the front, with connecting cable,
1 additional LED work light(s) at the rear, switched via reversing light
1x LED rotating beacon with holder, switched via parking light (removable light)
Floor
then with 70 mm softwood floor, steel/ checker plate flooring in the wheel housing area
Rear slope with Mega Grip covering made of toothed grating
Deep loading area incl. rear slope 6500 mm
Front bulkhead / front corner stanchions
25 mm aluminum hollow profile, 400 mm high, pluggable
Drive-on ramps
Steel ramps 3600 mm long, 750 mm wide, divided via cable extension, laterally movable,
Ramp displacement, minimum gap approx. 600 mm, maximum outer width approx. 2880 mm
Ramp surface with Mega Grip made of toothed grating
Hydraulic operation via own electro-hydraulic unit, mounted in the steel box, operation on the side in FR right . Note: Nato socket with connecting cable required on the truck. The connecting cable must not be connected while driving!
Hydraulic lateral displacement of the drive-on ramps, individually controllable (only in conjunction with hydraulic ramp actuation)
Operating instructions
The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution)
A special permit is required for axle loads of 10,000 kg. The approval must be applied for individually in each federal state
Listing
Triptis
18,329 km
Other
FlieglZPS 200 K Jumbo Z
Call
Condition: new, machine/vehicle number: 8df1ead53cc82aeb51e50a37d, empty load weight: 4 kg, maximum load weight: 13,880 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information
Chassis Turntable Disposal
Itedpfxei Ri Nuj Ah Nsb
Fine-grained steel welded construction
Container locking system:
- 2 pairs of locking hooks embedded in the floor
- Pneumatic actuation
The container locking mechanism is a 2-point design, acting from the inside, and locking of roll-off containers with an inner web is not possible (for transporting roll-off containers with a sub-frame in accordance with DIN 30722)
Note! At the start of the roller recess at the front, the container must be pushed on completely flat!
Longitudinal guide rails can be moved sideways and removed, rails approx. 115 mm high
Turntable with strong ball bearing slewing ring
8 pairs of lashing mushrooms at the top and sides of the outer frame, 5 tons each
7 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included)
2 wheel chocks with holder
Aluminum side bumpers
Steel underride guard
Quarter-shell mudguards according to EG
with anti-spray flaps according to EG
Towing equipment Trailer turntable
Drawbar with tested 40 mm drawbar eye
Axles + suspension
SAF drum brake axles
Axle/chassis laser-measured Reduction of tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings
Wheels and tires
235 / 75 R 17,5
at the manufacturer's choice
Twin steel rims, factory silver
Brake system
2-line compressed air brake system
Spring-applied parking brake
2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle,
ABS and ALB, with ABS plug at the front, with connecting cable
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
Electrical system
24 volt, multi-chamber lights, amber LED lighting at the side
2 white position lights at the front
2 white/red lane departure lights at the rear
2 x 7-pin interchangeable plugs at the front, with connecting cable,
floor
Steel floor
Roller recess for container recessed in the floor at the frontfor roll-off containers from 5,000 - 7,000 mm in length
Note: Slight floor undulation possible due to welding distortion!
Drive-on ramps
Lockable storage space for loading ramps underneath the loading area
Operating instructions
A special permit is required for axle loads of 10,000 kg. Approval must be applied for individually in each federal state; the legislator does not have to grant approval for 20 t GG. Customer risk.
The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution)
Country of registration / plates
Country of registration: Germany
with Dekra approval and expert opinion (according to §13 EG - FGV)
24/7 service hotline
Prepared for single-line license plate holder
Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear
Warning sign according to ECE - 70
Paint finish
Frame DB 7350 nova gray
15-year warranty against rusting through
Note: Bottom corrugation possible due to hot-dip galvanizing!
Drawbar KTL black
Attention: Archive pictures!
Listing
Triptis
18,329 km
Interchangable body
FlieglTWP 180 Jumbo Z
Call
Condition: new, machine/vehicle number: 81b04fd2e28f354df79a4c3b3, empty load weight: 3 kg, maximum load weight: 14 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 235/75 r17,5``, Further information
Chassis Wechel central axle trailer
Fine-grained steel welded construction
Front stop, longitudinally adjustable and foldable
2 pairs of removable guide rollers, front and rear
Folding locking adapter + height adjustment for parking height 1,000 - 1,120 mm, center supports can be folded and guide rollers can be pushed upwards,
4 container locking devices with sturdy outriggers on 20-basefor swap bodies 7.15 / 7.45 and 7.82
1 pair of gear support legs at the front, with straight lower section and single-sided operation in FR right
2 wheel chocks with holder
Aluminum side bumpers
Steel underride guard
Half-shell mudguards
Towing device central axle trailer
Towbar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required in case of order)
Under-coupler drawbar, free drawbar length approx. 2200 mm
Axles + suspension
SAF drum brake axles
Axle/chassis laser-measured Reduction of tire wear and fuel consumption
Air suspension
Brake system
2-line compressed air brake systemColor-coded line routing for easy servicing.
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, with connecting lines to the engine trolley, connection in FR-right
EBS, electronic brake system with EBS plug at the front, with connecting cable, connection in FR right-hand side
Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
with lifting & lowering valve, holding function in each case in lowering / lifting position
Vehicle - driving stability system
Wheels and tires
235/75 R17.5`` tires of the manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrical system
24 volt, multi-chamber lights, amber LED lighting at the sides
2 white position lights at the front
2 white/red lane departure lights at the rear
1 x 15-pin plug at the front, with connecting cable, connection in FR right-hand side
2 additional LED work lights at the rear, switched via reversing light
1 LED work light at the front, centered between the carriers, radiating to the rear, switched via reversing light
Operating instructions
The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution)
Country of registration / plates
Germany
with Dekra approval and expert opinion (according to §13 EG - FGV)
24/7 service hotline
Prepared for single-line license plate holder
Warning sign according to ECE - 70
Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear
Iedpfx Aei Riy Noh Notb
Paint finish
Frame DB 7350 nova gray10-year warranty against rusting through
Attention: Archive pictures!
Listing
Rheinbach
18,608 km
Cyclone Pre-separator
D&MZ-Line
Call
Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm.
Please let us know your volume flow and we will select the right cyclone for you.
Itjdpfeftb Ebox Ah Njb
Different versions available:
- Legs, made of painted square steel profiles
- Rotary valve and transition piece with inspection flap
- Inlet box with non-return valve
- Tangential outlet with/without pressure relief surface
- Square diffuser with/without pressure relief surface
- Sound insulation
Of course you can also obtain all accessories from us such as fans, exhaust pipes, deflector hoods etc.
Functionality:
The polluted air is tangentially fed into the cylindrical upper part
is introduced, causing the air to rotate. The material is placed under the
Influence of the centrifugal force in the direction of the cyclone circumference
pressed out and led out through the hole in the bottom. The
cleaned air leaves the cyclone through the centrally located
Outlet pipe on top.
The deposition efficiency increases with the feed rate, but
also the pressure loss and thus the energy consumption. It is therefore
it's important to find a good compromise.
We have developed a range of cyclones optimised for filtering large quantities of material. They are therefore very
well suited for the wood/paper/recycling/grain and feed industry
At the bottom, the cyclone can be designed with the correct size based on the air volume and a typical pressure drop in the range of 1000 Pa
can be selected.
Operating pressure +/- 5
Listing
Saarbrücken
18,716 km
Hexagon Optiv M 6.6.4 DUAL Z CMM
HexagonM 6.6.4 Dual Z
Call
Condition: as good as new (ex-display), Demo device with less than 20 operating hours // BEST CONDITION
System:
Optiv M 6.6.4 multi-sensor coordinate measuring machine with Dual Z technology
Probes and sensors:
- 10x CNC motor zoom with digital color camera and 12-segment LED ring light
- HPsS-X1H Scanning Sensor with HH-A-T5
- HP-S-X1C/H stylus holder (1xM3)
- M3 stylus kit for HP-S-X1C sensor
- HR-X button rack for HP-S-X1C/H (3 ports, L=400)
- Sensor calibration unit without calibration artifacts
- Glass standard 25mm
Itedponcfd Rofx Ah Neb
- Ring gauge 20mm
Computers and software:
- Measurement and evaluation software PC-DMIS CAD++
- Machine control unit BEST
- Dell 27" monitor
- work table
Optional accessories:
- Chromatic white light sensor (CWS)
- CWS measuring head 3mm
- Solara.MP12
- QA STAT 12
- O-QIS 12
Delivery, commissioning and other services on request
If desired, the measuring device can be converted from OptiCheck3D V 5.0
Listing
Włocławek
17,795 km
Belt conveyor with buffer 0.8m x 3.6m
przenośnik taśmowyz buforem
Call
Condition: good (used), Belt conveyor with buffer, belt width 0.8 m, belt length 3.6 m
Iedpfx Ahswynm Ej Notb
Listing
Deinze
18,734 km
Planer with or without milling heads
BerthiezX: 6000 - Y: 1500 - Z: 2000 mm
Call
Condition: ready for operation (used), X-beweging: 6000 mm
Y-beweging: 1500 mm
Z-beweging: 2000 mm
- 2 hoofden
- open kolom!
- elektrisch gereviseerd in 2010
- Heidenhain digitale uitlezing
- Leroy Somer elektra voor afvoer van tafel
- frequentieregeling op alle assen
- tafelafmetingen: 6000 x 1800 mm
Itedpfxjx Ti Uqs Ah Njb
- voldoet aan de huidige (Franse) gezondheids- en veiligheidsvoorschriften
- Belasting op de tafel: 18 ton
Machine werd gebruikt in de gereedschapswerkplaats van een autofabrikant.
Enkele plano freesmachine
Korting op een geldbedrag
Fresadoras zijn een soort pilaartjes van een kolom
Listing
Sierakowska Huta
17,772 km
Lower spindle moulder
STOMANA T800Iz wózkiem
Call
Condition: new, Catalogue number: S0367
TECHNICAL DATA
work table dimensions 800x800mm
engine power S1/S6 3.0 / 4.4kW
table hole diameter 190mm
spindle diameter 30mm
spindle tilt 0° -45°
spindle speed 1400 / 3500 / 6000 / 8000rpm
right, left rotation
spindle vertical travel 175mm
spindle working height 125mm
max. tool diameter for shaping / for tenoning 180/250mm
exhaust nozzle diameter 120mm
dimensions length/width/height 2800x1800x1090mm
weight 410kg
PRODUCT FEATURES
Large, massive cast iron work table.
Table hole diameter 190mm, with under-table exhaust.
Electronic speed readout.
Iedpfx Ahox Tgrgs Netb
Spindle protection for 180mm diameter.
Spindle lock installed.
4 speeds.
Spindle tilt forward
ADVANTAGES
– new machine
– tiltable spindle
– with side carriage
– CE certificate
Optional:
– motor power 4.0 (5.5) kW (HP)
– spindle protection for 250 mm contouring
– integrated safety guides 350, 500 mm
– table extension on the left and right side
– spindle diameter 1 1/4, 32, 35, 40, 50 mm
The price includes the milling machine with a sliding side carriage.
Net price: PLN 17,200
Net price: EUR 4,100 depending on the price EUR 4.20
(Prices may change with higher fluctuations)
Listing
Schwebheim
18,473 km
Box trailer
AckermannZ-KA-F10.5/7,5 1 Achs Kofferanhänger mit Ladebordwand 10,5 t GG
Call
Condition: used, empty load weight: 4,880 kg, maximum load weight: 5,620 kg, overall weight: 10,500 kg, axle configuration: 1 axle, first registration: 01/2018, loading space length: 7,450 mm, loading space width: 2,470 mm, loading space height: 3,100 mm, loading space volume: 57 m³, suspension: air, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Dautel DL1500 S tail lift, load capacity 1,500 kg, with own batteries, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: !
Ijdpfx Aox Tgnueh Nstb
Listing
Burbach
18,542 km
Welding cell Z 4
Cloos
Call
Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, 1 cloos welding robot ROMAT 320 inc. control ROTROL II, teach pendant incl. cable
gasnozzle sensing, seam tracking, point editor
Pedastal for robot
Cloos welding machine MC 3 353 (350 A pulsed arc machine), wire drive, torch, torch hose package, connection hose package, mech. torch cleaning, pressure ampl.,
2 stations turning table incl. 2 turning devices without tailstock type HW 3 DP 1500, load capacity/station 150 kg, swing radius 400 mm, max. dimension of workpiece 800x650 mm,
1 light beam, 1 start stop box, 1 safety wall on turning table
1 safety switches for service door incl door
Itsdpfoizkbpox Ah Nob
Base frame between robot and workpiecemanipulator
delivery time: 8 weeks. Subject to prior sale.
Trust Seal
Dealers certified through Machineseeker

Listing
Burbach
18,542 km
Welding cell Z 4
Cloos
Call
Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, 1 cloos welding robot QRC 300 ( year 2022 only 1258 hours) incl. control QC 2 ( year 2020, new PC 2022), teach pendant incl. cable
Gasnozzle sensing, point editor
Pedastal for robot
Cloos welding machine Qineo Puls 350 (350 A pulsed arc machine), wire drive, torch, torch hose package, connection hose package, mech. torch cleaning
2 stations turning table incl. 2 turning devices QR-WP-TC 1,5 kN
load capacity/station 150 kg, swing radius 400 mm,
1 light beam, 1 start stop box, 1 safety wall on turning table
1 safety switches for service door incl door
Base frame between robot and workpiecemanipulator
delivery time: about 8 weeks. Subject to prior sale.
Itjdsiyp Naspfx Ah Njb
Listing
Wymysłów
17,869 km
Stereoscopic microscope KERN OZL 464
Mikroskop stereoskopowy KERNOZL 464 z kamerą cyfrową
Call
Condition: excellent (used), Professional stereo microscope KERN OZT 464 from the renowned German manufacturer KERN & Sohn GmbH, designed for industrial, laboratory, electronics, and research applications.
Equipped with a high-quality ODC824 digital camera (3.1 MP CMOS, USB 2.0), enabling direct image transfer to a PC – an ideal solution for documentation, inspection, and analysis.
Technical specifications:
• Microscope model: KERN OZT 464
• Type: stereo, binocular with trinocular camera port
• Eyepiece: widefield WF 10x/20 mm
• Magnification: approx. 7x – 45x (standard)
• Illumination: adjustable LED, upper and lower
• Power supply: 100–240 V, 50/60 Hz
• Camera: KERN ODC824, 3.1 MP, 1/2” Aptina CMOS, USB 2.0
• Image capture and analysis software (Windows compatible)
• Includes power and USB cables
Condition:
• Device in very good condition, fully functional
• Clear and sharp image, smooth mechanical operation
• Complete set with all cables, protective cover, and digital camera
Applications:
• Research and industrial laboratories
Itsdoxmlfispfx Ah Nsb
• Quality control and metrology
• Electronics servicing and micromounting
• Education, science, and microscopic documentation
Listing
Wymysłów
17,869 km
Mitutoyo TM-101 toolmaker's microscope with Mitutoyo digital readouts
MitutoyoMikroskop narzędziowy Mitutoyo TM-101 z odczytami cyfrowymi Mitutoyo
Call
Condition: excellent (used), For sale: precision toolmakers' microscope from renowned Japanese manufacturer Mitutoyo, model TM-101 (Code No. 176-901). This device is designed for inspection of dimensions, shapes, profiles, surfaces, and contours in tool rooms, measurement laboratories, and quality control departments. Manufacturer: Mitutoyo Mfg. Co. Ltd. Japan Type: TM-101 Mitutoyo digital readouts on X and Y axes with ABS and INC functions, preset, and data output Measuring cross-table with rotation and adjustment Lighting functions: Surface, Contour, Main Power supply: AC 220V, 50–60 Hz, 8 VA Robust, stable industrial construction Very good condition, complete device, technically fully functional and ready for operation. Ideal for measuring cutting tools, milling cutters, drills, inserts, inspection of precision components, as well as contour, thread, and geometry measurements of workpieces.
Itjdpfx Ajw R E Hioh Nob
Listing
Wolfsbach
18,281 km
Articulated Jib Platforms
GenieZ-60 FE
Call
Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 7,756 kg, construction height: 2,540 mm, total length: 8,150 mm, arm reach: 11,150 mm, construction width: 2,490 mm, working height: 20,160 mm, Articulating boom lift
Itodpfx Ahsyafbro Njb
Speed class: 6.44
Technical condition: New
Battery condition: New
We make it easier for you to find: "z 5040"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Z 5040 (21,595)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month























































































































































