Used Xas 125 for sale (3,548)

Condition: used, functionality: fully functional, machine/vehicle number: 8701, Year of construction: 1999, operating hours: 2,117 h, load capacity: 1,250 kg, lifting height: 4,360 mm, free lift: 1,700 mm, fuel type: electric, mast type: duplex, fork length: 1,250 mm, drive type: Elektro, High-lift order picker Chassis number: 8701 Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Nwjdpsx S Tciofx Ah Heb Technical condition: normal Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 48V Battery type: PzS

Condition: good (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, input voltage: 400 V, noise level: 71 dB, extraction nozzle diameter: 125 mm, tank capacity: 165 l, Return device with slight signs of wear. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Nsdpswgz T Sofx Ah Hewb Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the Chip container due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminum-coated polyester fleece, resulting in a long service life Filter comes standard with an antistatic design, tested and approved according to category M-BIA The fan is installed downstream of the filter If a warranty is stated in the item description and/or in the description of the scope of delivery, this does not affect your statutory rights against your seller. Please refer to the warranty conditions for the scope, duration, contents, and the guarantor. We assume no liability for printing errors, mistakes, or incorrect representations. Technical and visual changes are reserved. Some images show optional accessories. Delivery is subject exclusively to our terms of delivery and payment. Sales are made through specialist retailers.

Condition: good (used), Year of construction: 1997, turning diameter over cross slide: 60 mm, spindle bore: 24 mm, spindle motor power: 7,500 W, rotational speed (min.): 30 rpm, rotational speed (max.): 5,000 rpm, total height: 1,660 mm, total length: 1,700 mm, total width: 1,240 mm, overall weight: 1,420 kg, Turning capacity Ø 200 mm, travel X/Z 180/400 mm, tools turret 8 places VDI 20 (16x16 mm), spindle 7,5 KW, 30 – 5000 rpm, spindle nose A2-4, chuck collet F38, bore Ø 32 mm, control FANUC Series T-20, manuals Nsdpfovu Tvpox Ah Hjwb

Condition: good (used), 724 USED WP Matador MD 125 deck/shelf oven with baking area: 12.5 sq m. Gas or oil burner. EXTERNAL DIMENSIONS (in cm): -W: 183, -L: 386, -H: 252. CHAMBER DIMENSIONS (in com.): -W: 120, -L: 200, EQUIPMENT: -gas/oil burner, -5-chamber. ​ The device is in our warehouse (36-068 Bachórz Poland). Nodpfx Ahorqikmo Hewb Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: reconditioned (used), Year of construction: 1975, Dorries VSE 125 Twin Ram CNC Vertical Grinder With Dual R&D CNC VGC-2 Controls (1975, overhauled in 2008) SAV Ø1,250mm Magnetic Chuck. Maximum Machining Ø1,2500mm, Maximum Machining Height 500mm. Grinding Wheel Mounts 127mm. Both Rams Can Be Pivoted. With Dual Roller Diamond Dressers, Dual MPM Digital Balancer, Rexroth Hydraulic Tank & Column Service Ladders. Approx Overall Dimensions L4.43 x W3.3m. Nwodpfxjx Swylo Ah Hsb

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box Nwjdpjcnw U Dsfx Ah Hsb The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: like new (used), overall weight: 6,400 kg, maximum load weight: 650 kg, load capacity: 500 kg, Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate Type KM 125 manufactured by KRAUSS MAFFEI. Nsdpfxorrwdbs Ah Hjwb AISI 316L wetted parts. Suspension: Rigid type centrifuge on inertia plate. Lid: with 3 manual opening closures, lid opening by means of a hydraulic piston (includes hydraulic power unit), a flat sight glass, an inclined sight glass, cake scraper, N2 inlet fittings and with washing tube and loading tube connections Transmission: 37 kW ATEX electric motor Securities: pneumatic lid opening safety piston, lid safety piston detector. lid open detector. detector for tachometer on machine and motor (includes connection box)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Emergency generator 125 kVA - as good as new/barely used Technical data: 100 kW / 125 kVA 230/400 V Nwodpfx Aetdb A Reh Hjb Current: 180 A Frequency: 50 Hz Year of manufacture: 12/2022 Produced according to ISO8528

Condition: excellent (used), 077 USED Spiral mixer + 2 stainless steel bowls. The machine is in working order. TECHNICAL DATA: - capacity 200 kg of dough, - 125 kg of flour. EXTERNAL DIMENSIONS (in cm.): Nwedpex Sqqqjfx Ah Hjb - W: 95, - L: 145, - H: 130 BOWL DIMENSIONS (in cm.): - W: 95, - H: 83.5 - D: 49.5, - internal width 90. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, functionality: fully functional, Universal centre lathe ŠKODA SRM 125 - 4000 after modernization of the mechanical part of the machine. The electrical part is equipped with Siemens CNC control: SIEMENS SINUMERIK 828D with SINAMICS drives. Technical data: Maximum swing over bed: 1,250 mm Maximum swing over carriage: 900 mm Maximum distance between centres: 4,000 mm Maximum workpiece weight: 14,000 kg Maximum torque: 34,000 Nm Minimum turning diameter: 200 mm Bed height: 620 mm Bed width: 1,100 mm Spindle nose: No. 10 Number of speed ranges (infinitely variable in each range): 3 Spindle speed range: 1.4 – 350 rpm Main spindle drive motor: 39 kW, fixed gear ratio 1:3 Maximum workpiece diameter in jaws: 1,030 mm Spindle centre taper: 80 mm – 1:10 Centre height above bed: 630 mm Nedpfx Ajxyxdxeh Hewb Carriage: Feed rate (Z and X axes): 2,000 mm/min Rapid traverse (Z axis): 6,000 mm/min Rapid traverse (X axis): 3,000 mm/min Traverse motor (Z axis): Siemens 1FK7 101, 27 Nm, with planetary gearbox Traverse motor (X axis): Siemens 1FK7 060, 6 Nm, with planetary gearbox Maximum tool section: 70 × 70 mm Maximum tool section for turret head: 50 × 50 mm Tailstock: Quill stroke: 200 mm Tailstock centre taper: 80 mm, 1:10 Tailstock feed rate: 2,000 mm/min

Condition: excellent (used), Year of construction: 2017, operating hours: 4,000 h, functionality: fully functional, operating pressure: 2,500 bar, Used Falch Trail Jet 125 high-pressure washer with 2500 bar pressure. The unit is in very good technical condition and ready for operation. Included with the device are the following items: - 3 new Falch high-pressure hoses - 3 used Falch high-pressure hoses - 3 control cables for connecting the Falch gun - New Falch 4-nozzle rotary head - Falch gun - 3 lance extensions for the Falch gun - Additional components for the machine: sets of seals, filters, etc. The machine has been serviced at the Falch headquarters and has operated for 5 hours since service. Machine data: Nwodpfx Ahoxzk U Sj Hob Year of manufacture: 2017, power: 129 kW, Deutz engine. The machine allows for adjustable working pressure.

Condition: good (used), Brand: SOLING Model: SCR 125 Tipo: Automatic hydraulic shear Maximum cutting diamante: 20 mm Minimum cutting diameter: 6 mm Nsdpfx Aokwdfqjh Hswb Bar loader up to : 6500 mm Maximum cutting length: 1.000 mm Minimum cutting length : 180 mm Components Automatic bar loader Hydraulic cutting head Electric desk Adjustable cutting length stop User manual

Condition: excellent (used), Brand: SOLING Model: SCR 125 Tipo: Automatic hydraulic shear Maximum cutting diamante: 20 mm Minimum cutting diameter: 6 mm Bar loader up to : 6500 mm Maximum cutting length: 1.000 mm Minimum cutting length : 180 mm Components Automatic bar loader Hydraulic cutting head Nsdpfxohymkwj Ah Hswb Electric desk Adjustable cutting length stop Manual

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: 210927, total width: 2,000 mm, total length: 15,000 mm, total height: 1,400 mm, The machine is being sold because our company's processing division has been discontinued. This Jagenberg Diana gluing machine is the ultimate all-rounder for folding carton gluing. Most of our folding cartons had an open size between 14 and 30 cm, but with a maximum width of 125 cm, large formats are no problem either. The machine can handle straight-line, crash-lock bottom, as well as 4- and 6-corner gluing. It was operated in single-shift mode without any technical issues. We retrofitted the quality inspection system from hhs, which includes product type detection with an ejection station and glue application monitoring. All belts were regularly replaced. The electric motor has been completely overhauled with new windings. The machine's main drive is via a robust coupling system rather than belts, as is common with later models. The machine is user-friendly, with all units easily accessible. Its overall condition is excellent, with only age-related signs of use. If interested, we can provide a video via email. Nodpex R Sn Isfx Ah Hewb

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Njdsv U R Agopfx Ah Howb Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019

Condition: used, Table size 1600 x 1450 mm Spindle dia 125 mm Spindle speeds 3,4-700 rpm Spindle taper MT 5 Movements: (X) column left/right 3500 mm (Y) support vertical 1550 mm (Z) Table to/from spindle 1350 mm (W) spindle movement 900 mm (B) Table rotating 360 deg. Equipped with: 2 axis dro Various tool holders (see photo) Nwedpfjx Iiknsx Ah Hob

Condition: excellent (used), ELIN EBG electric motor MUP 125 F04 ZWZ Nwodjwnfncspfx Ah Hsb

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, rotary mandrel press, rack and pinion press, workshop press, hand lever press, table press, shoemaker's press -Spindle press: Rotary mandrel press. Rack and pinion press, heavy-duty construction -Type: GA4 -Stroke: 45 mm -Protrusion: approx. 125 mm -Height: max 215 mm -Dimensions: 385/280/H620 mm Nedpox Ngyijfx Ah Hswb -Weight: 51.4 kg

Condition: excellent (used), Year of construction: 2008, 300 Kg load capacity welding rotary table, with hollow shaft diameter 125mm with jaw chuck 320mm or 400mm very robust speed infinitely variable from 0,15 to 5,0 rpm current transmission 350 A diameter rotary table 400mm inclination up to 135 Nwsdpfx Ahjlamtbo Hob height horizontal 835mm, tilted to center approx. 735mm length 850 mm x width 580 mm

Condition: good (used), Here we offer you 4 transport rollers for sale. Included in delivery are: 04x swivel castors, used Manufacturer: Kama Material color castor: red Material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm Roll width: approx. 34 mm Nwsdpfxehunwpo Ah Hjb Bearing: needle bearing Roller material: rubber plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 55 mm (center - center hole) Weight / pcs: approx. 0,970 kg

Condition: good (used), Current stock: approx. 370 pcs. Included in delivery: 01x fixed castor, used Manufacturer: Wicke material color castor: cream white material color frame: sendz. galvanized Technical data: Total height: approx. 150 mm Rollers Ø: approx. 125 mm Roll width: approx. 40 mm Roll material: polyamide plate dim.: approx. 102 x 87 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,745 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the article: Nwedpfx Ahshmux Ij Hob This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Dexion Type: Speedlock P90 (Silverline) Included in delivery are: 01x pallet rack traverse, used Material color: orange Type of truss: 125|14 I - profile: 125 x 50 mm agraffe: 5 HK (hooks) clear width: 3.000 mm max. load per truss pair 2.100 kg, with evenly distributed load The shelf loads only apply in conjunction with prop P90/20. In addition, the load-bearing capacity of the hook bracket must also be checked as a function of the bay load and the suspension heights. Njdpei E S Erofx Ah Hjwb 02x safety pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting out

Condition: good (used), Current stock: approx. 46 pcs. Included in delivery: 01x fixed castor, used Manufacturer: TENTE material color castor: grey material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm Roll width: approx. 32 mm Roll material: PP + TPE ← PA6 + PUR Njdpfxehmuyds Ah Howb Plate dim.: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pc.: approx. 0,57 kg

Condition: good (used), We offer here 4 transport rollers for sale. Included in delivery are: 04x fixed castors, used Material color castor: black Material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm roller width: approx. 37,5 mm Roll material: solid rubber Material rim: polypropylene plate dim.: approx. 100 x 90 mm (WxD) Hole Ø: approx. 9 mm Njdpfshunwaex Ah Hjwb Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pc.: approx. 0,803 kg

Condition: good (used), The scope of delivery includes: 1x used grating Material color: hot-dip galvanized Total depth: approx. 1,110 mm (support bar direction) Total width: approx. 1,130 mm (cross bar direction) Support bar: TS30/2.00 Frame height: approx. 30 mm Mesh width: approx. 35 x 40 mm Weight per piece: approx. 22.18 kg Internal designation: GR-125 Note: - The grating may have damage, scratches, dents, and welds. Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Njdpfxowmb Aas Ah Howb General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.