Used Woodworking Machines for sale (68,701)

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting panel saw T 73 by Martin with 3-axis scoring unit and 3m table Sliding table length: 3000mm Saw blade tilting range: 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Drive motor 5.5kW with automatic motor brake Saw blade diameter up to 500mm Maximum cutting height: 170mm Cutting width up to 1100mm, adjustable from the front via handwheel and manually movable Tilting angle and height adjustment electrically adjustable Crosscut fence with 2-point stop, up to approx. 3350mm Parallelogram cross table with digital angle display and roller Folding rip fence Extraction ports 120 + 100mm Sliding table lockable in every position Handle grip Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, newly sharpened 3 riving knives 3-axis scoring aggregate, fully electrically adjustable while the machine is running 2 protective hoods Counter-angle fence for acute angles Tool compartment Emergency stop switch Operating manual CE marking Machine with slight signs of use on the anodized surface of the sliding table. Minor cuts on the sliding table have been repaired. Original paint, only spot repainted in places. Excellent condition as shown in the original photos. Dimensions approx. 3300 x 3750 x 1600mm (LxWxH). Weight approx. 1950kg. Gcodpfx Agjxtvcxs Dja The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks Gedpsx Dax Eefx Ag Doca

Condition: used, machine/vehicle number: 008121, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Corner Rounding Unit: yes Max Panel Width: 3000 mm Godpfxjw Idhts Ag Doca Max feed speed: 32 m/min Operating Units Right Side: 10 nr Operating Units Left Side: 10 nr

Condition: used, Year of construction: 2015, Production line for shoe soles and insoles, all machines are operational. Gjdpfox E D Hlox Ag Dsca

Year of construction: 2006, condition: used, Dimensions (LxW): 1400 x 420 cm Auction item. Production line butterfly table RANDEK BS40 for assembling wooden frame building panels is in working condition. Gsdox E Armepfx Ag Doca The set includes a material feeding table, work table, frame trimming table - butterfly table, closing work table (total 4 tables). Work table dimensions 14m x 4.20m. The work tables have been dismantled from the production premises.

Condition: used, Year of construction: 2018, machine/vehicle number: Werksüberarbeitungsnummer: WÜA18031207013284, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, table length: 840 mm, main saw diameter: 450 mm, power: 7.5 kW (10.20 HP), Equipment: rotational speed infinitely variable, Used machine GM010.0399 F45 Pro Drive Year of manufacture: 2018 Template holder Max. saw blade diameter: 450 mm Gedpfxew Nii Ss Ag Djca Motor: 7.5 kW Vario DRW: 3000 mm TPL: 840 mm WGA Digit-L PA 1300 mm CNC Front support roller Air cushion table

Year of construction: 2014, condition: used, Technical data: Material: PET aluminium-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4–153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) • max. 270 N (φ1000 mm) Winding tension: • φ200 mm: 50–300 N/m • φ400 mm: 50–170 N/m • φ700 mm: 50–100 N/m Mechanical specifications: 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback sensor • Dancer roller included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” with adapter • Web guide: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and contact rollers with pneumatic pressure adjustment 3. Slitting Mechanism • Upper/lower NC shear cutters • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Precision: ±0.1–0.2 mm • Dust extraction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Location: below slitter Units: 2 (left / right) Drive: AC servo motor Tension: dancer roller control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Contact roller with pressure adjustment • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilting function Electrical & control: Line drive motor: 7.5 kW AC servo Winding drive motor: 11 kW AC induction Unwinding drive motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwinding panel, mini winder panel, auxiliary panel PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Required floor load capacity: ≥ 2 ton/m² Documentation: 2 operating manuals Spare parts: • Drive belts (4 types for line drive) Gcodpfx Agox Ez Ums Dea • Winding drive belt (1 type) • Unwinding drive belt (1 type) • Standard tool set

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Gsdob A Nmiepfx Ag Djca -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 18 kg

Condition: used, machine/vehicle number: 007964, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Gsdpfx Aewu Af Sjg Deca Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: ready for operation (used), Year of construction: 2006, GUK folding machine FA 50/6 FA 52/4, year of manufacture 2006, equipped as follows: – Flat pile feeder FA 50 – 1st station FA 50 with 6 folding pockets, double pre-mounted knife shaft, top segment rollers, HHS cold glue 1 head, HHS hot glue with 2 heads, and transfer table. – 2nd station FA 52 with 4 folding pockets and transfer table, hydraulically height-lockable. – Knife shaft station SM 52 with 4 knife shafts, hydraulically height-adjustable. – Shingle delivery SM 52 – Vacuum/blast air pump – Window folding pocket Gcsdpjx Endujfx Ag Dja – Various spare parts

Condition: new, Year of construction: 2026, Gannomat hinge boring and hardware insertion machines are hardware manufacturer independent and designed for the precise drilling and insertion of hardware. Robustness, durability and ease of use distinguish our universal hinge drill machines. Short introduction: • Independence from hardware distributors and manufacturers • Precision drilling unit with steel gears and steel clutch Gsdpsdx Axuofx Ag Deca • Universal application: hinges, row of holes as well as line drilling, connectors and fittings, handle and through holes, holes for drawer slides, ... • Massive and stable tilt stops • Distance from the front stop to drilling spindles up to 300 mm (Basica Variabel)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T211178, cutting length (max.): 3,200 mm, cutting width (max.): 1,410 mm, main saw diameter: 315 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, F25 Basic equipment - Manual height and tilt adjustment of saw blade 0 – 46°, with digital display - Drive power 4 kW (5.5 HP), single speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Mitre fence, cross cuts up to 3,450 mm - Max. saw blade diameter 315 mm, max. saw blade projection 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Gedpfx Aowwt Ayog Djca Equipment package type 2 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence, 1,410 mm - Large extraction hood (PSV) - Basic scorer with LED lighting

Condition: ready for operation (used), Afrolmachine 5 ton Middenhoogte: 1300 mm Spoellengte: max. 1100 mm Decoiler is verplaatsbaar, gemonteerd op chassis Laadwagen is vast gemonteerd op chassis Gcedpfswu Inrjx Ag Dja

Condition: good (used), Year of construction: 2001, Tube diameter 76.1 mm Max. tube feed length 4500 mm Max. bending radius 200 mm Machine weight approx. 1.7 t Required space approx. 6000 x 1000 x 1300 mm Gedpfx Asx Eivvog Doca - Max. tube diameter: 76.1 mm - Max. tube feed length: 4500 mm - Max. bending radius: 200 mm - Bending direction: right - Electronic 1-axis control - 2-axis measuring system - Electronic display of torsion - Electronic display of longitudinal position - Torsion angle unit with stops - Early mandrel retraction - Automatic mandrel lubrication with micro-oil dosing Accessories: - Incl. bending tools 21.3 / 26.9 / 33.7 / 42.4 / 48.3 / 60.3 / 76.1 mm x 2D - Incl. various mandrels

Condition: used, machine/vehicle number: 007641, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Gsdpfx Agjwuz R He Djca Operating Units Right Side: 8 nr Operating Units Left Side: 9 nr

Condition: new, Year of construction: 2026, NC controlled line drilling machine for high capacity production with 1 or 2 drilling untis each with 76 drilling spindles. Short introduction: • Row of holes as well as line drilling in the SYSTEM 32 mm Gcedpfx Aedxz S Hjg Dja • 76 or 152 (2 x 76) holes in one drilling cycle • Drilling depth correction for different drilling depths • Massive precision drilling unit from GANNOMAT • Line drilling machine for high capacity

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Gcsdpex A Hggsfx Ag Dea Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Condition: used, machine/vehicle number: 008266, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Gcedpox A Hfisfx Ag Dea Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 25 m/min Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Lined sliding table: yes Max. forward feed speed: 25 m/min Gcedpfxsw Iddzo Ag Doa Operator shafts number: 6

Condition: used, machine/vehicle number: 007307, Max. working width: 3200 mm Max. working thickness: 60 mm Gsdpfsuaq D Ajx Ag Dsca

Condition: used, machine/vehicle number: 005979, Squaring: First Pass Max feed speed: 20 m/min Gcodpfx Agsx A E S Io Dsa

Condition: used, machine/vehicle number: 005854, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3300 mm Gjdpfx Agsv Hinxo Doca Max feed speed: 30 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, machine/vehicle number: 007783, Type of edging: Thin edge, Thick edge Gedpfjvxxvcjx Ag Deca Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 2500 mm

Condition: used, machine/vehicle number: 005980, Squaring: First and Second Pass Max Panel Thickness: 120 mm Max feed speed: 20 m/min Distance between dogs: 1000 mm Godjxcf S Ispfx Ag Deca

Condition: used, machine/vehicle number: 006561, Type of edging: Thin edge, Thick edge, Solid wood Gcedpfxoqa Rxaj Ag Doa Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 2800 mm Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr