Used Wood Shavings for sale (6,729)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Output 350 kW Year of manufacture 2010 with feed with ash discharge Gedpfjznca Hsx Akyjbu with control

Year of construction: 1995, condition: repair required (used), Log grapple for portal crane, previously used for handling large-dimensioned logs. Gbedoy Tv Nuspfx Akyju Maximum opening width: 1.80 m.

Condition: used, - Type: Professional deck oven - 5 decks × 3 chambers - 15 openings - Energy source: Triple fuel – gas/wood/diesel - Heating system: Annular tubes for uniform heat distribution - Usable depth: 2,200 mm Gbodpfx Akezhk Rmoyeu - Condition: Almost new, used only for commissioning and ignition tests - Previous use: No commercial production, only technical tests - Structure: Full stainless steel, durable and easy to maintain - Cooking type: Stone hearth - Controls: Manual adjustment - Operating temperature: Up to 300°C - Insulation: High density, limiting heat loss and consumption - Overall dimensions: Large structure suitable for production workshops - Production capacity: Ideal for high-volume baking (bread, pizza, pastries, etc.) - Overall condition: Excellent

Condition: excellent (used), Year of construction: 2018, operating hours: 4,351 h, functionality: fully functional, machine/vehicle number: W09812219J2D38029, first registration: 10/2018, overall weight: 19,000 kg, color: orange, axle configuration: 2 axles, operation weight: 18,760 kg, empty load weight: 18,760 kg, tire size: 600/50 R22.5 166F, next inspection (TÜV): 01/2026, maximum speed: 80 km/h, drive type: Zapfwelle, number of previous owners: 1, load hours: 4,351 h, crane manufacturer: Palfinger, Equipment: ABS, additional headlights, chaff cutter, compressed air brake, crane, front power take-off, lighting, power take-off driven, trailer coupling, Fully developed hydraulic counter-cutter, developed together with Doppstadt on the vehicle and fully operational! Spare parts supply is ensured by Doppstadt as well as TCS Umwelttechnik GmbH, Austria. - 2-axle trailer - Length: 6,360 mm / Width: 5,039 mm / Height: 5,834 mm Godjxqgm Nspfx Akyebu - Transport width: 2,539 mm / Transport height: 3,929 mm / Transport length: 6,414 mm - Required power: 250 – 370 kW - Chipping drum: 6 knives - Hardwood trunks up to Ø 480 mm, softwood trunks up to Ø 600 mm - Feed height: 950 mm / Feed width: 1,200 mm - Rotor diameter: 1,000 mm / Rotor width: 1,200 mm / Loading height: approx. 1,400 mm / Infeed width: approx. 2,000 mm - Variable feed speed / closed and robust chipping drum / simple design and maintenance - Variable knife protrusion and easy screen basket change for high-quality wood chips from P16 to P100 (G30 – G100)

Condition: used, Year of construction: 2024, New demonstration machine! Particularly heavy-duty design with high dead weight for maximum smooth running • Exceptionally quiet and precise operation thanks to torsion-resistant machine housing • Large cast parallel fence with round bar guide, easy to move • Cast flywheels with rubber coating and cleaning brush • Large grey cast iron saw table, tiltable with ground and polished surface • Precise cutting height adjustment via rack and pinion with millimeter scale • Door safety switches • Self-braking motor • Two extraction ports Technical data: Table dimensions (L x W x H): 720 x 520 x 860 mm Cutting speed: 1,650 m/min Weight approx. 240 kg Max. cutting height: 350 mm Max. cutting width: 520 mm Max. saw blade length: 4,260 mm Saw blade thickness min./max.: 0.5 / 0.6 mm Precision guides top/bottom Saw table tilt: 0 - 20° Machine dimensions (L x W x H): 870 x 620 x 1970 mm Godjwggakjpfx Akysbu Location in stock:

Condition: ready for operation (used), Year of construction: 2007, power: 55 kW (74.78 HP), Fully functional single-shaft wood shredder - currently in operation in our factory. Including electrical control system (PLC), switch cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Technical data Rotor working length: 1,500 mm Rotor diameter: 485 mm Motor: 55 KW Gbedpsra Ex Ejfx Akysu Rotor speed: 100 RPM Rotor knives: 76 pieces concave / 35x35 mm 4-fold rotating cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg Further details on request. Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, XYLOG 800 – The professional log sawing and splitting machine for industrial firewood production The Rabaud XYLOG 800 is the powerful solution for anyone who wants to efficiently and economically produce large quantities of high-quality firewood. As a stationary sawing and splitting machine, it processes logs up to 800 mm in diameter with impressive speed and precision – ideal for forestry operations, timber traders, and commercial firewood producers. Your advantages at a glance: • Highest capacity: Up to 800 mm log diameter – perfect for thick hardwoods such as oak, beech, or ash. • Flexible cutting system: Optional with SUPERCUT chainsaw bar (113 cm, automatic tensioning & lubrication). • Adjustable log length: From 25 to 50 cm – hydraulically adjustable with automatic retraction for maximum efficiency. • Powerful splitter: 16 tons of splitting force with ISO POWER (automatic, continuously variable speed control) and two independent splitting knives. • Safe and precise feeding: 3 independent log clamps, chain feed table (up to 8 m usable length), and V-shaped conveyor belts for safe transport even with crooked or short logs. • High productivity: Saws from bottom to top – saves time with smaller diameters and minimizes waste wood. Gbodpfxozgwfhs Akyju The XYLOG 800 combines sawing and splitting in a robust, low-maintenance system. It is specifically designed for continuous industrial use and impresses with its durability, low operating costs, and excellent log quality. Perfect for: • Professional firewood production • Forestry companies with high throughput • Wood processors who value uniform, sales-ready logs Significantly increase your productivity – with the Rabaud XYLOG 800, you produce more firewood in less time, with less effort, and higher quality. Request a non-binding offer or a demonstration now! The XYLOG 800 – Powerful performance for strong wood.

Condition: ready for operation (used), Year of construction: 1995, A robust Mawera wood shredder including feed floor is offered. Throughput capacity: approx. 500kg/h, feed width: 844mm, drive power: 22kW, number of blades: 30, blade diameter: 64mm, motor speed: 1480rpm, control system: PLC, weight: approx. 2100kg, dimensions: approx. 2020mm/1650mm/1250mm. Inspection by appointment possible. Gsdpfx Akszmymbsyebu

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 2,400 mm, loading space length: 5,000 mm, loading space height: 2,600 mm, Equipment: lighting, Containers shown in the images are in stock and available for immediate delivery. Inspection and collection are also possible. In this offer, we present the Villex Medium Wood Pavilion 2.0 container, suitable for use as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, living containers, or site containers. Dimensions: 5 x 2.4 x 2.6 m Delivery: available nationwide Standard Features: Condition: New & Assembled Wood-look panels (as shown in the photos) Exterior walls: 50 mm thick Floor area: 12.0 m² Weight: 900 kg 1x door (glass) 2x floor-to-ceiling windows (1000 x 2000 mm) Electrical: - 3x power sockets, circuit breaker + fuse Delivery is typically carried out using our own vehicles. Payment can be made in cash upon delivery to our driver or conveniently in advance via PayPal or bank transfer. For in-stock standard containers, nationwide delivery takes approx. 1–2 weeks from receipt of order, depending on the destination postcode. Gbsdpjy E Rxbofx Akyeu We manufacture and deliver custom containers within 1–4 weeks.

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 1,600 kg, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: air conditioning, lighting, Containers in the image are in stock and immediately available. Inspection and collection are possible. We offer Villex Big Wood Pavilion Containers in this listing, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, living containers, or construction site containers. New & ready-to-use including air conditioning Size: 6.0 x 3 x 2.6 m Delivery: Possible nationwide in Germany Standard Features: Condition: New & fully assembled Exterior color: Black + Brown (as shown in the photos) External wall thickness: 50 mm Area: 18 m² Weight: 1600 kg 1x entrance door 2x windows → Single-leaf, fixed glazing, and tilting function included Electrical installation: 6x sockets, circuit breaker + fuse, surface-mounted wiring (PVC) We can manufacture your container individually according to your requirements! Optional features for an additional charge: Custom dimensions e.g. 7x3m, 4x2.4m, double containers, triple units, and much more Different window sizes Various color options Floor color options Practical forklift pockets Air conditioning Lighting Roller shutters Heating WC, shower, toilet, washbasin Kitchen Plastered interior walls And much more Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver or conveniently in advance by PayPal or bank transfer. The delivery time for standard containers in stock is around 1-2 weeks nationwide after receipt of order, depending on the postcode area. Gbedpfxsy Egrdj Akyju We manufacture and deliver custom containers within 1-4 weeks.

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 150 mm gear width: * mm Gbsdpfxeyud Tis Akyou max. module: 3,5 min. module: 1,25 total power requirement: * kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,35 x 2,10 x 2,35 m Width of teeth: 45 mm boring diameter: 100 mm surface area: 1300 x 300 mm

Condition: like new (used), functionality: fully functional, AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working condition : excellent CE mark: YES instruction booklet: YES cutting diagram . see attachment with rollers tracks ( as in photo ) Gedpozfggfofx Akyebu n.01 stop max.blade diam.mm.550 motor power Hp 10 volt. 380/50

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, power: 55 kW (74.78 HP), Vecoplan Shredding Unit – Efficient Processing of Wood Waste The Vecoplan shredding unit is a powerful complete solution for the continuous processing of wood waste, cut-offs, strips, boards, and other wood residues into high-quality wood chips. The coordinated components ensure a consistent material flow, reliable continuous operation, and high economic efficiency. Components of the system: Vecoplan VTH 65/25/5/U Industrial Shredder (year of construction 2017) The VTH 65/25/5/U is a robust industrial shredder for continuous use in the wood industry. With its inlet opening of 650 × 250 mm and a drive power of 55 kW, it reliably and energy-efficiently processes a wide variety of wood residues. Depending on the material properties, the machine achieves a throughput of 1 to 5 tons per hour. The VTH series is characterized by high throughput rates, a robust design, and low maintenance requirements. Vecoplan VR 65/24 Vibrating Table The vibrating table with a usable area of 650 × 2,500 mm ensures a uniform material distribution and continuous feeding of the shredder. This avoids peak loads, optimizes system performance, and ensures a smooth production process. Vecoplan KKF 500-1K-U Scraper Conveyor Gjdjzh Ti Espfx Akysbu The downstream scraper conveyor with a conveying width of 500 mm reliably transports the shredded material for further processing or storage. It is ideal for transporting wood chips, sawdust, wood shavings, and pellets and impresses with its robust industrial design. Advantages of the system Complete, perfectly coordinated Vecoplan system Consistent material feed through vibrating table High throughput of up to 5 t/h Robust industrial design for continuous operation Low maintenance requirements Ideal for sawmills, wood processing companies, biomass plants, and pellet production Immediately ready for use for the economical processing of wood waste.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 45 kW (61.18 HP), Material shredding machine MHR 1030-45 kW Immediately available demonstration machine – as new condition For sale is a new material shredding machine MHR 1030-45 kW from our exhibition and demonstration stock. The machine is immediately available and can be inspected and demonstrated by appointment. Due to the elimination of the usual production and delivery times, the system is ideal for companies that require additional shredding capacity in the short term. Technical data Infeed opening: approx. 1,030 x 1,235 mm Hopper design: inclined Hopper volume: approx. 1.5 m³ Rotor diameter: 360 mm Rotor design: standard Cutting system: 25 concave knives + 25 square knives Screen size: 25 / 30 mm (optional) Main drive: 45 kW Power connection: 400 V / 50 Hz / 3 phases PLC control Control cabinet completely wired including 5 m connection cable Hydraulic slide with pressure bar Equipment Automatic star-delta start Automatic idle detection with shutdown Cyclic control to avoid unnecessary idle times Performance-enhancing step control for the hydraulic slide Vibration-dampening machine feet Solid base frame Control cabinet extension for integration of conveyor belt and overband magnetic separator Painting Machine body: RAL 9005 Deep black Hopper and drive guard: RAL 5012 Light blue Application areas Suitable for shredding: Wood and wood waste Plastics Packaging materials Production waste Commercial and industrial waste Recyclable materials for further processing ✔ New machine from exhibition stock ✔ Ready for demonstration ✔ Immediately available ✔ No production or delivery time ✔ Inspection and test run possible by appointment Godpfx Aezhx Eljkyobu Price, net plus VAT Further information, videos or an individual offer can be provided upon request.

Condition: excellent (used), Deburring machine, 1 upper head, 3 kW motor 2 lower head, 3 kW motor Gbedpfoy Andcox Akyeu 3 right head, 3 kW motor 4 left head, 3 kW motor 5 universal head, 0.37 kW motor 6 feed mechanism, 1.5 kW motor, 18 m/min Working height: 11 cm Working width: 14 cm

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) Godsyhzhzspfx Akyobu PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Gbjdpfxjzc Hkyj Akysu

Condition: excellent (used), functionality: fully functional, CUTTING , TRIMMING SAW machine for solid wood model MZ PROJECT LC 4000 automatic machine second hand machine CE regulation: YES end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 with automatic pusher (CN). Maximum cutting width: mm.1500 Gsdpfx Akozdqxceyobu conditions of use: Excellent. maximum cutting length: mm.4000 motor power: Hp 15 total weight: kg. 3.000 volts: 380/50

Condition: used, Year of construction: 2021, machine/vehicle number: 2021358, total height: 2,000 mm, total length: 3,600 mm, total width: 2,500 mm, overall weight: 1,500 kg, Portal milling machine, profile guides KPF-S 20, tool length sensor, vacuum table, vacuum pump from Becker, cross table, dust extraction unit Holzkraft ASA4303, tool set. Gedpfx Akjzgc T Djyjbu Please refer to the attached expert report for details on the condition of the item.

Condition: like new (used), Year of construction: 2026, operating hours: 18 h, functionality: fully functional, power: 15 kW (20.39 HP), REUSER SD600 Industrial Shredder – Demo Machine with Less Than 20 Operating Hours Economically shred residual wood instead of disposing of it at high costs. Are you looking for a reliable solution for processing wood waste, cut-offs, pallets, chipboard, or other wood residues? With the REUSER SD600, you get a powerful industrial shredder in a robust, professional design – ideal for carpentry shops, joineries, timber construction companies, pallet manufacturers, sawmills, and recycling companies. Demo Machine – Almost Like New This unit is a demo machine with fewer than 20 operating hours. The machine was only used for a few weeks at a customer's site. The customer then decided to opt for a larger machine model. Take advantage of this opportunity now and secure this almost-new machine at a significant price advantage compared to a new machine. Your Advantages ✔ Demo machine with less than 20 operating hours Gbodpfx Akeznuhvjyju ✔ Immediately available – no long delivery times ✔ Technically inspected and ready for immediate use ✔ Significant price advantage compared to a new machine ✔ Robust industrial design ✔ 12 months warranty ✔ Inspection and demonstration possible at any time Ideally suited for: Carpentry shops Joineries Timber construction companies Sawmills Pallet manufacturers Furniture industry Plastic processors Recycling companies Disposal companies Suitable for: ✓ Solid wood ✓ Chipboard ✓ MDF ✓ OSB ✓ Pallets ✓ Wood waste ✓ Cut-offs ✓ Plastics ✓ Packaging materials

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Gedpfx Aksvbdyxsyebu Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Log Splitter 30t HS-30P PRO Gsdpow Smlpofx Akyjbu With a splitting force of 30 tons, the SCHORR HS-30P effortlessly tackles even the hardest woods and thick logs. The robust construction (370 kg own weight), a low-wear hydraulic system, and a high-strength steel frame ensure long service life, maximum stability, and reliable operation—even in continuous-duty applications. PTO Drive – Directly via Tractor Thanks to its PTO drive, the HS-30P can be directly connected to a tractor. This makes it highly mobile and independent of power sources—ideal for use in forests, meadows, or farmyards. The splitter operates with stable power transmission and a high-performance hydraulic pump that ensures fast splitting cycles. Durable Construction – Engineered for Tough Conditions The design relies on high-strength steel components and a stable wedge guide. Sturdy support feet provide secure footing, while large transport wheels make relocation easy—even on uneven ground. Splitting Length up to 110 cm Long log sections can be processed without issues. The robust splitting blade made of tool steel guarantees a precise split line and minimal wear. Integrated Log Lifter – Enhanced Comfort & Safety The log lifter allows for effortless lifting of heavy logs and simultaneously acts as a protective guard—offering significant relief in daily operations. Two Return Modes & Speed Settings -- Automatic Return: The wedge returns autonomously to the preset position—ideal for fast working cycles. -- Manual Return: For precise splitting tasks, especially with irregular logs. Additionally, a rapid advance speed and a slow, extremely powerful splitting stage are available. Practical Details for Everyday Use -- Retractable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-hand safety operation for maximum protection -- 3-point hitch (Cat. I & II) for convenient transport with the tractor Technical Data -- Manufacturer: SCHORR -- Model: HS-30P -- Splitting force: 30 t -- Weight: 370 kg -- Drive: PTO (540 rpm) Dimensions: -- Length: 1540 mm -- Width: 1400 mm -- Height: 2500 mm (retracted 1990 mm) -- Hydraulic cylinder: Ø 13.8 cm -- Piston rod: Ø 7 cm -- Splitting wedge: 26 cm -- Splitting diameter: max. 40 cm / min. 8 cm -- Distance wedge-ground: 16 cm Speed: -- PTO: Advance 5.5 s / Return 9.5 s Your Advantages at a Glance -- Ready for immediate use—no long wait times -- Robust design—390 kg own weight for maximum stability -- Convenient log lifter for heavy wood -- Spare parts always available -- Expert service & advice Whether delivery or collection in 48465 Schüttorf—we offer the right solution.

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Wood Splitter 30t HS-30PE PRO With a splitting force of 30 tons, the SCHORR HS-30PE handles even the toughest wood and large logs with ease. Its heavy-duty design (own weight 390 kg), low-wear hydraulic system, and high-strength steel frame ensure a long service life, ultimate stability, and reliable operation—even in continuous use. Combined Drive: PTO & Electric Motor The HS-30PE can be operated either via PTO (540 rpm) or the integrated 400V electric motor. This offers maximum flexibility: mobile operation in the forest with a tractor, or emission- and noise-free at the yard. Robust Design—Engineered for Heavy-Duty Use The construction features high-strength steel components and a stable splitting wedge guide. Sturdy support legs provide firm footing, and large transport wheels ensure easy relocation—even on uneven terrain. Splitting Length up to 110 cm Even long trunk sections are processed with ease. The solid splitting blade made of tool steel guarantees a precise splitting line and minimal wear. Integrated Timber Lifter—More Comfort & Safety The timber lifter allows easy, effortless positioning of heavy logs and also acts as a protective guard—greatly simplifying everyday work. Godpfow R N Hmox Akyebu Two Return Modes & Speed Settings -- Automatic Return: The splitting wedge automatically returns to the preset position—ideal for fast operation. -- Manual Return: For precise splitting, particularly with irregular wood. In addition, there is a fast advance mode and a slow, high-power mode for actual splitting. Practical Features for Everyday Use -- Lowerable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-handed safety operation for maximum protection -- 3-point hitch (Cat. I & II) for convenient tractor transport Technical Data -- Manufacturer: SCHORR -- Model: HS-30PE -- Splitting force: 30 t -- Weight: 390 kg -- Drive: 400V electric motor (5.5 kW, 16A) or PTO Dimensions: -- Length: 1550 mm -- Width: 1150 mm -- Height: 2500 mm (lowered 1990 mm) -- Hydraulic cylinder: Ø 13.8 cm -- Piston rod: Ø 7 cm -- Splitting wedge: 26 cm -- Log diameter: max. 40 cm / min. 8 cm -- Wedge-ground clearance: 16 cm Speed: -- PTO: Forward 5.5 s / Return 9.5 s -- Electric: Forward 7.5 s / Return 14.5 s Your Advantages at a Glance -- Ready for immediate use—no long waiting times -- Heavy-duty design—390 kg net weight for maximum stability -- Flexible operation—tractor or 400V connection -- Convenient timber lifter for handling heavy logs -- Spare parts always available -- Professional service & support Whether delivery or collection in 48465 Schüttorf—we offer the right solution.

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Digital Signal Processing Digital signal processing. A plotter with a working area of 1220x1230 ensures smooth operation of the device and accuracy in processing. The memory built into the controller allows the machine to work without the need to load the program each time. very quiet operation and guaranteeing increased durability. The Premium version meets the expectations of individualists as well as companies with a lot of orders. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 3.7kW / 18000 rpm. inverter, air-cooled Workspace 1230x1220x210mm Control DSP Software resolution 0.001mm Gjdpfeiz Avvox Akyebu Power 400V Weight 450kg Machine dimensions 2000x1800x1640mm Table height 715mm Guides linear Transfer toothed rack (Z axis - ball screw) ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Equipment Leveling Feet, snake, clamps, screws, keys, 2 boxes of cutters, 1/8, 1/2 and 5-6 mm collets The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: used, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.770 mm -Cutting height: max.400 mm -Saw band: length 5330 mm -Work table: pivoting -Dimensions: 1470/935/H2390 mm -Total weight: 743 kg Gbsdpfx Akjkia T Ujyeu