Used Wood Gripper for sale (7,412)

Condition: good (used), Year of construction: 1992, Chipper with hydraulic walking floor Rotor width 700 mm Motor 11 kW Nlodpfx Ahowv Hmvsksf Screen with 16 mm perforation No PLC installed yet Partially overhauled New rotor bearings

Condition: new, A device for storing and feeding logs onto a sawmill table. The systematic material feed to the saw increases its efficiency and eliminates the need for additional personnel. Dimensions: Width: 800–2000 mm Height: 800 mm Length: 4000–12000 mm (longer option) Nedpowavrcsfx Ahkslf Log length: 1000–2500 mm Log diameter: 100–400 mm Feed speed: adjusted to the incoming feeder LOG FEEDING A device for storing and feeding logs onto the table of a gang saw. The targeted material feed to the gang saw increases its efficiency and eliminates the need for additional personnel. Dimensions: Width: 800-2000 mm Height: 800 mm Length: 4000-12000 mm Log length: 1000-2500 mm Log diameter: 100-400 mm Feed speed: Adapted to the feed rate

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg Nledpfxoxmrwfj Ahkjf • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Compact Shredder typ PYTHON-XL 1600, with 15 KW electricmotor, 400V 50Hz• • Electric motorreductor 15KW, 400V, 3phs, 50Hz 40% MORE torque compare PYTHON 1600 Standard • Opening 1600 x 1000 mm • Main dimensions L 2700 x B 1400 x H 2600mm • Discharge opening 400x 100mm Njdpfx Ajvx Hkzehkelf • Height discharge opening ca 1000mm • Electrical control box with INVERTER, main switch, selector switch on / off switch and emergency stop • Easily moved either with forklift or by means of lifting eyes • Weight approx. 2700 kg • Comprehensive machine manual • Finishing in RAL 3002 and RAL 7022 • (Subject to technical changes) • CE certified and "Made in Holland"

Condition: used, Year of construction: 1975, with new feed carpet, not installed second hand Njdjvwgczjpfx Ahkolf Make Löwer Type RSM 280 S Year of construction 1975 Machine no. 3528 Number of belt units 1 piece Engines 5.5 hp Sanding width approx. 140 / 150 mm Grinding height approx. 120 mm band oscillation tape blow-off Feed speed 6 / 11 / 16 m/min. Band length approx. 1600 mm Band width approx. 160 mm Extraction connection D 100 mm Space requirement approx. LxWxH mm 1400x1000x1600 Weight approx. 650 kg Storage location 97447 Gerolzhofen Handover in the current condition as seen without guarantee and guarantee - free loaded -

Year of construction: 2026, condition: new, ProfiStop Lazer is a simple, no frills saw measurement solution for light-duty industrial applications. High speed, high accuracy cutting production cut, after cut, after cut. • Fast and high-accuracy automatic servo motor cut measuring • Simple to use and setup, compatible with most saws / drills • Light duty 10-20 kg recommended material weight • Ideal for aluminium, softwood or light steel • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Kitchens and wardrobes manufacture • Stairs and banisters manufacture • Furniture manufacture • Windows and doors manufacture • Woodcraft manufacture Can be used with all your existing saws including: • Mitre drop saws • Industrial drop saws • Guarded up-cut saws Nsdpsf Dp Dhsfx Ahkslf • Radial arm saws • Drills and presses Model: ProfiStop Lazer Length: 3 m Stroke: 2674 mm Pushing capacity: 10-20 kg Software: Basic Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 7.5 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Nedpfx Asf Ekncehkslf Model: A550 Length: 7.5 m Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: LEUT Wood-Alu 110mm Hole 50mm. Nljdpfx Ahsg Tumyeksf All complete. Very good condition. Available as a set. Possible to buy also separately.

Year of construction: 2021, condition: new, machine/vehicle number: GWH432125, Working width 1,100 mm, Sanding belt dimensions 1,120 x 2,150 mm, Maximum workpiece thickness 160 mm, Combination sanding unit with calibrating roller D = 150 mm, Pneumatic segmented sanding pad with insert control, Motor 15 kW (20 hp), Sanding belt speed 18 m per second, Continuously variable feed rate 4 - 20 m/min, Nsdpfxjhgmmae Ahkolf Feed motor 0.55 kW (0.75 hp), Electric table positioning with motor 0.24 kW and digital LCD height display, Mechanical "ECO GEAR SYSTEM" (oscillation of the sanding belt), Automatic belt centering, Automatic emergency table lowering, Check control panel, Automatic sanding roller shut-off at the control panel, Sanding grit adjustment with 6 settings, 2 rollers each at the infeed and outfeed, Dust extraction connection D = 160 mm, Machine complies with CE regulations, Dimensions approx. L x W x H, 1,650 x 1,800 x 2,025 mm, Weight approx. 1,300 kg, (Identical to Unitek LC 1120 1N KRT) Available from stock in Seevetal, subject to prior sale, Excluding transport, installation, and instruction.

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Rotor diameter approx. 400 mm Motor 75 kw Discharge via conveyor belt with magnetic roller Nledpfotgqlyox Ahkjf

Condition: new, Type MX5116T+ V-480 Work table dimensions 1100x700 mm Sliding table 1085х250 mm Diameter of spindle 30 mm Spindle rotation speed 6000-8000-8000-10000 rpm Max. working thickness 120 mm Motor power 4 kW Nledoqxtdqjpfx Ahkof Dust exhaust outlets Ø90, 200x80 mm Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 469 kg Price 3190 Eur (EXW Jonava, Lithuania)

Condition: new, Type MX5117B+V-480 Nedpeqxtdxefx Ahkolf Work table dimensions 1130x670 mm Spindle speed diameter 30 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 394 kg Price 2490 Eur (EXW Jonava, Lithuania)

Condition: new, Spindle diameter 90 mm Diameter of sawblades 255 mm Cutting width 1600 mm Cutting height 0-50 mm Motor power 37 kW Nedpod Nluwsfx Ahkjlf Speed 2800 r/min Feed speed 0-15 m/min. Feeding motor 3 kW Delivery term: ~ 3 months.

Condition: new, max. workpiece length 3200,5100 mm profile spindle 1 Stück main drive 12 kW Control Beckhoff CNC Number of axles 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum Nlsdpfx Ahsd N Rt Tokjf ----- 5-Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, Treppen Kurze Zusammenfassung: ----- Arbeitsbereich: X = 3200 mm (Optional 5100 mm) ; Y = 1500 mm; Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung mit 2 doppelten Horizontalbohrspindeln X-Richtung und 1 doppelte Horizontalbohrspindel in Y-Richtung Sägeaggregat in Bohrkopf integriert 27 Werkzeugwechselplätze: Karussellwerkzeugwechsler mit 22 Plätzen und 102 mm Rasterabstand lineares 5-fach Werkzeugmagazin für große WKZ-Durchmesser Konsolentisch mit 6 Traversen Werkstückanhebevorrichtung 6 Stk. spezielle Spanner für runde Fenster- und Türenelemente 24 Stk. Vakuummspanner für Platten und Innenausbau 1 Stk. Vakuumpumpe 100m3/h 1 Stk. Spänetransportband 1 Stk. Fernbedienung Konstruktions-Software Masterwork: 2D-Wop für Standardanwendung Plattenbearbeitung/Innenausbau, Rundbogen, Türen Master 3D Stufe 2: für komplexere Bearbeitungen, optional auch erweiterbar für 5-Achs voll interpolierend Fracht und Montage innerhalb Deutschland Technik und Dienstleistungen gemäß beiliegender ausführliche Beschreibung ----- Gesamtpreis in dieser Ausführung: auf Anfrage! ----- Optionen mit Mehrpreisen: ----- Arbeitslänge 5.100 mm anstelle 3.200 mm inklusive Erhöhung Konsolenanzahl und Spannmittel Mehrpreis: 7.500,00 Euro zzgl. MwSt. Zusätzlicher Karussellwerkzeugwechsler mit 16 Plätzen und 102 mm Rasterabstand Mehrpreis: 6.500,00 Euro zzgl. MwSt. Ausführliche Beschreibung siehe PDF anbei. Mehr Optionen auf Anfrage! (technische Angaben laut Hersteller- ohne Gewähr!)

Condition: new, Type MX5117B Work table dimensions 1130x670 mm Njdjd R Shnjpfx Ahkjlf Spindle speed diameter 30 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Transport dimensions 1130x670x1100mm Weight 325 kg

Year of construction: 2025, condition: new, Vacuum lifter BARBARIC, swiveling, including column-mounted slewing crane Equipment package consisting of: - Vacuum lifter uniWood B3-90° - 250 Comfort version, with integrated chain hoist reinforced, lifting capacity: 250 kg Suitable for vertical and horizontal transport of flat, commercially available panels. Vacuum generation is achieved pneumatically via an ejector. For lifting porous materials (MDF with a thickness of more than 8 mm), a reinforced vacuum pump is installed. -- Technical data -- Lifting speed of chain hoist: 0-10 m/min infinitely variable via frequency inverter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Nledpfx Ahsc Umftjkef Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: approx. 85 kg -- Safety system -- The lifter is equipped with a vacuum pressure gauge. Releasing the load using a 2-button function. - Column-mounted slewing crane BARBARIC Load capacity 250 kg on the lifting device Consisting of: Column, console and low-friction jib. Delivery including sliding carriage and power supply. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Outreach: 5 m Slewing range approx. 250° Manual slewing and trolley movement Base plate with 700 x 700 mm and fastening material. Delivery with adhesive anchor for concrete floor. A suitably reinforced concrete floor is required for this fastening. The static verification of the floor must be carried out on site and documented accordingly. Other versions and lengths available upon request.

Condition: good (used), Year of construction: 2010, fully functional wood gasification system with 40 kW of electrical power and 80 kW of thermal power. Nledpfxeiggpbe Ahkef

Year of construction: 1980, condition: excellent (used), planing width 310 mm planing height 300 mm four-sided planing height 200 mm bottom head motor 15 kW upper head motor 22 kW Nljdpsiqflbofx Ahkof right head motor 7.5 kW left head motor 11 kW feed motor 7.5 kW electric height adjustment smooth change of feed speed

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Nodpfx Ahsyalblekelf

Condition: like new (used), engine power 22kW shaft width 410mm driven feed rollers sieve 30mm and 15mm inlet width 430mm Nledpfx Ahsx Sycioksf

Condition: used, axle configuration: 3 axles, first registration: 11/2005, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,790 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Unladen weight: 7,580 kg, Gross weight: 39,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Year of body construction: 2005, Sliding roof, Axle type: BPW = Further Information = General Information Cabin: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Njdpfx Ahjx S Uzaekjlf Axle configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 9 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 6 mm Axle 3: Tyre tread left: 7 mm; Tyre tread right: 8 mm Weights Unladen weight: 7,580 kg Payload capacity: 31,420 kg Gross vehicle weight (GVW): 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Maintenance APK (Dutch MOT-equivalent): valid until 09.2026 Condition Overall condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our inventory covers all European makes, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognized quality • Competitive pricing • Professional business practices • Multilingual staff • Customer-focused service • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The safety of “recognizable quality” • And much more.... Visit our website for special offers and the complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and send us a request via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 2022, Type of fuel: Petrol Empty weight: 1.450 kg Technical condition: good Visual appearance: good Water tank volume: 30 l Transport dimensions (LxWxH): 0,267x0,118x0,239 Please contact Christian Theißen for more information Manufacturer: Först Model: TR6D Year of build: 2022 Nedpfxoxgp H Ds Ahkslf Condition: Used Data: Roller diameter: 150 x 200 mm Total dimensions LxWxH: 2,67 x 1,18 x 2,39 m Drive type: Benzin, 31,3 kW/ 42 PS Dimensions funnel WxD: 3405 x 2627 mm Hopper loading height: 2295 mm Engine: Doosan Tank volume: 30 Liter l Weight: 1.450 kg Special features: Caterpillar shredder with chain drive. Feed roller system: FörstGrip, flywheel system: top open flywheel (640x25 mm) Two 8" knives, no-stress system: Auto Intelligence, feed system: Auto Intelligence, fully water and vibration-proof touchpads. Noise level: Lwa 121dB. Price on demand Location: 41468 Neuss: immediately available

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters Nodpfxju Axfce Ahkelf -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: new, Year of construction: 2026, WOOD SHAVINGS MACHINE KÄLIN Hobeltechnik, mod. MPC-P • Quantity of fresh shavings by hour: 3.800 Kg/hour • Measures logs box: 2.800mm x 1100mm x 1.300mm • Max. log input length: 2.650mm • 2 removables symmetrical cutterheads. Lenght 1.140mm. Each one in 3 pieces of: Nlsdpfx Ahovk Saxokjf - Diameter: 200mm - Length: 380mm - Number of knifes: 8 - Sharpening full cutterheads, without removing knifes!! • 2 extra removables symmetrical cutterheads, for replacement during sharpening. Super fast cutterheads change patented system!! • Power of the cutting heads: 90 kW/120 HP • Feeding speed controlled by ELECTRONICAL INVERTER: 6 to 36 m/min • Automatic control of the forward-charge ratio of the machine • Power of the feed motor: 15 kW/20 HP • Control System of the material level inside the logs box, to avoid working without logs • Cabinet and control panel. Touch screem to control the machine • Motorized conveyor belt for the wood shavings. 800mm x 5.000mm • Weight: 11.000 Kg • CE

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm 22 kw motor Njdot Tvk Aepfx Ahkjlf with discharge auger