Used Windows Package for sale (20,795)

Condition: used, Lot of 5 units WIG welding machines ESS model Thyrotig - Thyroplasmma 250 (DC) WIG welding machines in need of repair Year of manufacture: 1991 to 1994 Output: 250 Amp. = 60% duty cycle, 195 Amp. = 100% duty cycle Current type: DC Mains connection: 400 Volt, 50 Hz, 32 Amp plug - High-voltage ignition - 2-stroke and 4-stroke operation modes - Water-cooled - Some parts missing - Delivered without torch sets/hoses, scope of delivery as pictured Space requirements (L x W x H): 1200 x 570 x 920 mm Weight per welding machine: 255 kg Total weight for all 5 machines: 1,275 kg Rjdpfx Aow Hhbisgwech Three machines are operational. Two were kept in storage as parts donors. The units are no longer tested and are being sold as in need of repair.

Condition: used, Equipment for the production of round-arched windows consisting of: · Bäuerle table router · Leitz tool set with guide rings · Compass with Scheer router Further information: See PDF. Rcedpoxbx Erjfx Agwsh

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 1,700 mm, type of input current: AC, total width: 750 mm, total length: 900 mm, overall weight: 300 kg, input voltage: 230 V, table load: 15 kg, year of last overhaul: 2025, ambient temperature (max.): 30 °C, ambient temperature (min.): 12 °C, maximum load weight: 20 kg, Equipment: documentation/manual, lighting, type plate available, Fully factory-refurbished and modernized multisensor coordinate measuring machine Mahr MS222 with a modern 64-bit CNC controller and Windows 11, including 12 months warranty and full support from the specialized service company. The measuring device has been completely factory overhauled and reconditioned, equipped with a modern new controller and the latest version of our measurement software. The measuring system will be delivered and set up at the customer’s site for the above-mentioned price. Additional optional services: On-site commissioning / calibration Training Custom measurement programming for immediate start of part inspections Complete package includes: Rsdpfxowcxb Sj Agwsch Measuring machine 64-bit CNC controller Industrial PC with Windows 11 Perpetual software license OptiCheck3D 2025 (full license of the measurement software with no subscription or maintenance contract) Multisensor head with high-resolution industrial camera Renishaw TP20 touch probe system (alternatively TP200 system available) including one standard force module Calibration artifact Acceptance certificate / calibration certificate (pre-shipment condition) Free delivery within Germany (EU and international shipping available on request) Specifications: Measuring range: 200 x 200 x 200 mm Load capacity: 10 kg on glass plate Scale resolution: 0.1 µm Max. travel speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Accuracy according to VDI/VDE 2617 Sheet 6, ISO 10360-2: U1 = 1.9 + L/200, U2 = 2.2 + L/150, U3 = 2.9 + L/100

Condition: good (used), TIG hose package, welding torch, manual welding torch, TIG torch -with: torch body -Length: 8 m -Tuchel connector: 5 pin Rcodpfxed Nv A Es Agweh -Water cooled -Weight: 3.8 kg

Condition: used, SECOND-HAND WORKING CENTER FOR DOORS AND WINDOWS SAOMAD OPERATOR 8 - CE RULES Butting disk saw: - Motor power Hp 4 - Saw shaft revolution speed 3000 rpm - Disk saw diam. 400 mm. Tenoning side - Min. work piece lenght mm. 200 - Max. work piece lenght mm. 2800 Rcodpfx Ajwrb Tvogweh - Min/max. work piece thickness mm. 30/120 - N. 2 shafts Sash profiling - Motor power Hp 0 - N. 4 shafts Glass stop recovery Hardware grooving unit Roller advance Wooden piece return roller Max. feeding speed 20 m/min - Year 2000

Year of construction: 2014, condition: used, Automatic cutting machine for PVC profiles loadingtabel for 6500 mm lenght unloading table Labelprinter Redpfx Aoxb U N Hegwsch Sawblade diameter 500 mm cuttinge angles -45°/90°/+45°

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: PB-S80 W-2 .11.844.921.21035/10, cutting current: 300 A, hose package length: 1,500 mm, working length: 1,500 mm, New torch hose package Kjellberg PB-S80 W-2 .11.844.921.21035/10 for Fine Focus 800 plasma system. Current new price: €8,600 – €6,500. The hose package is new and has not been used, only for the initial cutting test. The hose package length is 1.5 m. Rjdpfxoxbqdys Agwoch

Condition: used, functionality: fully functional, Year of construction: 1999, COMPLETE PVC WINDOW PRODUCTION LINE FOR SALE MACHINES ARE IN OPERATION AND CAN BE TESTED ON SITE 1. WEGOMA SUPERCUT 3000 CUTTING & PROCESSING CENTER + additional reinforcement unit Automatic PVC profile cutting and processing center, multifunctional unit, operated via computer with cut optimization software. Processing capacity: approx. 240 units in 8 hours, Year of manufacture: 1999 2. URBAN AKS 4410 VERTICAL FOUR-HEAD WELDING MACHINE FOR PVC PROFILES Rcjdoxbqdmopfx Agwjh Vertical automatic machine for simultaneous welding of four corners. 3. URBAN SV503 PVC WINDOW CLEANING MACHINE WITH WT550 HANDLING TABLE Specialized for reliable cleaning of weld seams, year of manufacture 1991.

Condition: used, Year of construction: 2013, functionality: fully functional, CNC - ACCORD 40 FX MACHINE MAIN FEATURES: - working area X - Y = 5,020 x 1,680 mm Automatic lubrication. Pendulum machining. Air-conditioned control cabinet. XILOG MAESTRO Teleservice. 8 FX MATIC L=1600 work table supports automatically positioned Includes: - 2 fixed side base supports - 8 supports with X-axis drives - driven belt conveyor for removing waste from the inside of the table Each support equipped with: - 3 driven trolleys for mounting pneumatic clamps and suction cups - cleaning nozzles for each moving trolley Rcjdpfxewkqavj Agwsh - pneumatic locking/release enabling quick replacement of clamps and suction cups - preparation for strips facilitating loading and unloading - preparation for mounting an additional stop Vacuum clamping system for elements with 2 independent work fields. Front and rear row of stops H=110 MAXI PRISMA T 5-axis spindle - HSK 63E holder - right/left rotation - power: 13 kW - rotation from 600 - 18,000 rpm - 15 kW inverter - liquid cooling - TTS locking system Waste guide at the electrospindle Blow nozzle for the tool Tool length measurement Preparations for pneumatic clamps BRC - Additional drilling and milling machining head Saw - saw diameter 300 mm - rotation 4,500 rpm 1 vertical ER25 clamp for milling cutter - machining depth 60 mm - rotation 18,000 rpm 3 vertical independent M10 clamps for drills, spacing 32 mm - machining depth 50 mm - speed 8,000 rpm 3 vertical independent M10 drill mounts, spacing 21.5 mm for making holes for the handle - machining depth 50 mm - speed 8,000 rpm 2 horizontal independent mounts (1 per side) ER25 for the milling cutter - machining depth 1x115 and 1x75 mm - speed 18,000 rpm 4 horizontal independent mounts (2 per side) M10 drill mounts - machining depth 75 mm - speed 8,000 rpm Window equipment in the left field Worktable equipment enabling the machining of linear and arc elements of windows: - 9 pneumatic clamps H=110 mm - 1 base stop H=110 mm on the left fixed support for basing arcs - 7 base side stops H=110 on supports - 1 laser as a base for arc elements in the X axis Supports facilitate loading/unloading Vacuum pump with a capacity of 250 m 3 /h TECPAD portable console PRO-SPEED security system Security system allowing for fast machine travels. Axis runs: X=90 m/min Y=90 m/min Z=30 m/min SAV€NERGY for vacuum pump TR-10 – tool magazine mounted on the table -10 positions TRC 48 – tool magazine Mounted at the back of the movable portal. - 48 tool positions (without holders) - distance between axes: 104 mm - max. tool diameter: 350 mm - max. load of one place: 10 kg - total weight of tools in the warehouse: 250 kg MACH 5 - a system enabling tool change in 5 s. Year of machine production - 2013 The machine is in continuous use - it will be available from July We invite interested parties to inspect it during operation Purchased as new from an authorized SCM representative in Poland and serviced by an authorized SCM service throughout the period of use The price of the machine includes preparation for transport by the SCM service and loading of this machine The film has been slightly accelerated

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm Redpfxsixxwme Agwech T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: excellent (used), Holtec package crosscut saw HF 121 1,9m cutting length Rcedpfx Asufg Tdjgwoh

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Holtec package cross-cut saw Vario Cut with Holtec mechanization. Jörg Elektronik. Complete disposal/removal under the cross-cutting system. Rcodpfx Asw Smz Djgwoh

Condition: ready for operation (used), There are 22 machines available, 4x Singer 770 D41PE, 2x Singer 990 E3, 1x Singer 993 E3 FA320, 1x Singer 460 K73, 1x Union Spezial Klasse 75300 A, 1x Rimoldi 446930, 1x Romoldi 416498, 1x Rimoldi S60, 1x Rimoldi 7142, 1x Rimoldi 7143, 1x Lewis 150-2, 2x Kettma Klasse 100KA, 1x Kettma Klasse 100 KAS and four additional machines. Rcsdpfxoihc Hho Agwsh

Condition: excellent (used), Year of construction: 2005, I sell the 4-Side brushing machine suitable for windows, doors, tables, etc. Futura MS120 Y1 X2, year 2005 Working width 1200mm Working height 200mm Rjdpfx Agsd Raqkjwsch Total weight 2500kg Configuration: Side brushing heads left - right H.170mm 2 bottom heads left - right Nylon W.140mm Oscillating top head W.260mm Big brushing heads top - bottom W.1150mm Machine equipped with heads on the pictures. Available immediately.

Year of construction: 2025, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. Rjdpfxog Rxhgs Agwjch The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 32 h, functionality: fully functional, machine/vehicle number: 20225204645, arm reach: 1,300 mm, type of input current: three-phase, feed length X-axis: 2,000 mm, load capacity: 12 kg, input voltage: 400 V, type of cooling: water, workpiece weight (max.): 12 kg, hose package length: 3,500 mm, protection type (IP code): IP54, working range: 1,300 mm, Lorch welding robot UR 10 e-Series with Cobot Move travel axis including Lorch S5 SpeedPulse XT RoboMIG FullProcess Redpfx Aow Ilmqjgwoch featuring a Lorch Cobot torch LMR 450 W 3.5 m, Lorch Con-nect weld data monitoring, Lorch Cobot Move travel axis, multifunction flange, including the following software package: Extended weaving, interval welding, Quick-Points – programming via multifunction flange, Smart Copy – direct copying or moving of parts, Extended assistant – user-specific parameters, Seam-Tracking – intelligent seam tracking, without welding table (available on request)

Condition: excellent (used), SMT Lathe 80001350   The machine is designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick & place unit between the shaft ends. - Ring seat turning + commutator facing + commutator turning. - Ring assembly - commutator side - Ring assembly - drive wheel side The machine has several production programmes to produce different parts. Each programme corresponds uniquely to one shaft type Technical data Armature shaft length from to 92.5 - 163.1 mm  Bearing journal diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Rsdpfx Agjhw Emqewoch Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm Ring seat diameter 44 - 50 mm Surface ring seat Rz 20 mm Main dimensions and weight of the machine Machine length 2870 mm Machine width 2600 mm Machine height 2530 mm Machine weight 5000 kg Electrical installation Rated current 10 A Rated voltage (AC) 400 V Rated power 7 kVA Rated frequency 50 Hz Pneumatic installation Nominal pressure 5 bar Maximum pressure 10 bar Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), MIG/MAG hose package extension, intermediate hose package -Welding cable: extension / connection cable water-cooled -Length: 4.35 m Rsdeucmncspfx Agwech -Version: Dinse plug, gas hose, control cable -Connector: 4-pin -Transport dimensions: 470/460/H100 mm -Weight: 6.0 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, We have a production line for UPVC profiles, they were purchased in 2010, they have only operated for 2 years, and now they are for sale because the company that had them has now closed. They were serviced before being stored. The machines are in Patras, Greece. Any operational check is welcome. Rcjdpfx Agswyvh Rswjh (1) Aluminium and UPVC end milling machine OMC Maxima, (new never connect) (2) CNC automatic line UPVC CNC corner cleaning machine with 4 head horizontal welder - RISUS, RKT-8000 (3) UPVC bead saw - RISUS, RK-1080 (4) UPVC 4 Head vertical welder - HAYA, (5) UPVC 4 Head corner cleaning machine semi-automatic - WEGOMA, WPA4 (6) Single Head multiple corners welder machine -RISUS, RYL-1050 (7) UPVC profile Hot air bender /CBM, (8) 4 Machine benches, (9) ACCESSORIES SMALL TOOLS AND DIES (milling cutters for the machines, chisel etc.). There are spare parts available , as well as technical assistance, if needed. The selling price for all these machines together is at least 50,000 Euros plus VAT, if necessary. They do not sell independently. Collection from Patras, Greece (we have a fork lift truck to help if need)

Year of construction: 2017, condition: as good as new (ex-display), Complete PVC Window Line 30 Windows Consisting of: Mitre Saw GS-400/M with length stops End Miller AKF-210 Sight surface groover 7405 Handle Drilling and Routing Machine KF-130S with self centring Rsdpfx Agsux Adowoch Waterslot Drainage Router SK-8/3 Single Head Welder WSA-1E, 2.0mm restrictions Glazing Bead Cutting Saw GLSM-200E

Condition: good (used), MIG/MAG hose package extension, intermediate hose package -Welding cable: extension / connecting cable -Length: 10 m -Version: Dinse plug, gas hose, control cable -Connector: 14-pin -Transport dimensions: 620/600/H160 mm Rodpfeucmpyox Agwsch -Weight: 14.8 kg

Condition: good (used), MIG/MAG hose package extension, intermediate hose package Rodpscillzjfx Agwoch -Length: 33 m -Version: Dinse plug, gas hose, control cable -Weight: 72 kg

Condition: good (used), MIG/MAG hose package extension, intermediate hose package -Length: 13 m Rsdocilmaepfx Agwech -Version: Dinse plug, gas hose, control cable -Weight: 28 kg

Condition: good (used), MIG/MAG hose package extension, intermediate hose package Rcjdpfx Agscill Tswjh -Length: 27 m -Version: Dinse plug, gas hose, control cable -Weight: 64 kg

Condition: good (used), MIG/MAG hose package extension, intermediate hose package -Length: 30 m -Version: Dinse plug, gas hose, control cable -Weight: 68 kg Redpocill Hofx Agwjch