Used Window Mill for sale (20,630)

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a repair shop. The digital display shows 2 axes because the third axis display is defective. Rodpfx Ajvxllkodaen All three scales are OK and you can choose which of the 3 axes should be connected. Machine with a just low special price. Machine dealer with own stock of 1600 m².

Condition: excellent (used), 1 used, very well-maintained universal milling head system "HURON" with automatic 2.5° indexing on 1 axis, internal spindle cooling, and hydraulic tool clamping. Make: CME, Origin Spain Model: FS Rsdpeyf Uqtofx Adaen Spindle taper: DIN 69871 AD, ISO 50 Max. speed range: 4,000 rpm Max. drive power: 22/30 kW Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW Worktable: 1200 x 730 mm + extensions Worktable height: 920 mm Spindle tilt: -10° + 45° Max. spindle projection above table: 175 mm Spindle speeds: 3250/6500-5000/10000 rpm Max. tool diameter: 250 mm Weight: approx. 950 kg Storage location: Nattheim Rodpfxjw Enw Is Adaon

Condition: used, Year of construction: 2018, x-travel 1.270 mm y-travel 508 mm z-travel 635 mm Rodpfx Aeyf N Hpjdaon distance spindlenose to table 107 - 742 mm spindle tunring speed 12.000 U/min spindle drive 22,4 kW max. torque 122 Nm table dimensions 1.321 mm rapid traverse ( x / y / z ) 495 m/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical specifications & accessories: - Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2019, Control: MITSUBISHI M730UM with CELOS Main spindle with integrated motor spindle ISM 80: 15/18.5 kW Speed range: 10–4000 rpm 10" hollow chuck 254mm KITAGAWA BB210A821 Counter spindle with integrated motor spindle ISM 65 Speed range: 10–5000 rpm 10" hollow chuck 254mm KITAGAWA BB208A621 20-position BMT star turret KNOLL high-pressure coolant system 70 bar Y-axis with 100mm travel Rjdeyf H E Nspfx Adaen Gantry loading system LG-10AI

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Rsdpfx Adoyf H Eisajn Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min Rsdeyf H Ecopfx Adajn max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm

Condition: good (used), Year of construction: 1972, functionality: fully functional, travel distance X-axis: 290 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, overall weight: 1,200 kg, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Milling spindle number of milling spindle turning speeds: 16 Rjdpfx Adoyf H A Ujasn milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° angle head Redpfxoyf Hzks Adasn Mounting: HSK-A100 Collet: ER25-A (clamping range: 0.5–16 mm) Max. torque: 30 Nm Max. speed: 8,000 min⁻¹ Transmission ratio: 1:1 Angle head: 360° adjustable Weight: approx. 8 kg The angle head was used on a MAG HÜLLER HILLE - NBH6+ but can also be adapted or fitted to other machines.

Condition: used, Year of construction: 1999, operating hours: 9,140 h, total height: 2,750 mm, total length: 2,620 mm, total width: 3,000 mm, Empty weight: 7.000 kg Price: On request - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 906237 - Operating hours: 9140 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Fanuc - Control system type: 18-M - Number of axes [pcs]: 3 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 520 - Z-axis travel [mm]: 630 - Table length [mm]: 1200 - Table width [mm]: 550 - Tool holder: BT40 - Main spindle power [kW]: 11 - Max. spindle speed [rpm]: 8000 - Options: External cooling - Transport dimensions: 2620mm x 3000mm x 2750mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Rsdpfjyf E U Aox Adaen Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm Rsdeyf Evtjpfx Adaon table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, CNC control Sinumerik 828D 2-axes dividing head (4th and 5th axis) electronical hand wheel 24-fold automatic tool changer coolant through spindle device chip screw measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 1100 mm Verfahrweg Y / Y-Travel 650 mm Verfahrweg Z / Z-Travel 600 mm Tischgröße / table size 1300x600 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 8000 UpM /rpm Rsdpfx Adjyf Eqdjasn Anzahl der Werkzeugplätze / tool places in ATC 24 Eilgang X,Y,Z / rapid feed X,Y,Z 15,15,15 m/min Gewicht der Maschine ca. / weight ca. 7400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a Rjdpfjyf Eigex Adajn training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: ready for operation (used), TOS milling machine FN 32, spindle taper SK 40, speed range 40–2000 rpm Redpfoyf Efhox Adajn

Condition: good (used), Please read the technical specifications in full. If you are considering this machine for an investment, we request that you provide your complete credentials with a valid phone number and email address in order to receive an offer. EMCO Universal Milling Machine Type FB 3 (NOT a DECKEL FP 1) with 3-Axis HEIDENHAIN Digital Readout Year of manufacture: 2007/2008 2 units available! Travel X/Y/Z: 300 x 200 x 350 mm Vertical/Horizontal Spindle Taper: SK 30 DIN 2080 Tool Clamping: manual Quill Stroke: 45 mm Swivelling Vertical Milling Head: +/- 90 degrees Spindle Power: 1.1/1.4 kW (60/100% duty cycle) Speed Vertical/Horizontal: 80 – 2,200 rpm Number of Gear Steps: 8 Fixed Angle Table: 600 x 200 mm Infinitely variable feed: X/Y-axis: 0-550 mm/min Rapid traverse: X/Y-axis: 1200 mm/min Z-axis feed: manual Machine dimensions (WxDxH): 1150 x 1410 x 1550 mm Weight: approx. 500 kg Standard Features: - 3-axis HEIDENHAIN digital display - Coolant system integrated in machine base - Angle table - Manual central lubrication - Swiveling device for vertical spindle - Chip tray - Splash guard - CE compliant Special Features: - HEIDENHAIN precision digital readout - Infinitely variable feed/rapid traverse in longitudinal and transverse axes - Operator panel with clearly arranged keypad for ease of use - Safety handwheels on all 3 axes - Adjustable precision tapered roller bearings - Adjustable, double-acting hardened gib strips - Removable coolant tank Rjdpfoxx R Itsx Adajn Additional Equipment: - SEMER micro spray unit connected to coolant switch/standard coolant pump Applications: Ideal for instrument and prototype construction, training centers, workshops, and professional DIY enthusiasts The machines come from a training facility. Condition: good to very good Available from March 2026, possibly earlier by arrangement.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,300 rpm, spindle speed (min.): 50 rpm, Universal Milling Machine Kunzmann WF 4/3 Rodpfsyf Duhsx Adasn Year of manufacture: 2008 Control: Heidenhain TNC 124 Previously used in a training workshop Technical data: Spindle speed: 30 - 3,300 rpm Tool holder: SK 40 Travels: X-axis: 400 mm Y-axis: 320 mm Z-axis: 400 mm Accessories: SK 40 holders Machine vice

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Rodpfxjyf Dp Es Adasn Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), Year of construction: 2010, operating hours: 31,600 h, functionality: fully functional, machine/vehicle number: 3078, Axis Travel: Z = 400 mm Y = 200 mm X = 410 mm Power / Thrust Force Z-Y: 2.5 kW / 550 daN (option with linear motor = 7.2 kW / 350 daN) X: 4.8 kW / > 550 daN Traverse Speed X-Y-Z: 40 m/min (option with linear motor = 50 m/min) Acceleration X-Y-Z-W: 8 m/s² / 0.8 g (option with linear motor = 10.4 m/s² / 1.1 g) Resolution X-Y-Z-W: 0.0001 mm MAIN SPINDLE + C1 Power: 7.5 kW Torque / peak: 22 / 28 Nm Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm Rotational speed (turning): 72,000°/min Clamping force (turning): 4,900 N at 6 bar B AXIS (TILTING TOOL SPINDLE AXIS) Power: 4.3 kW Torque / peak: 119 / 226 Nm Angular range: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Support torque: 200 Nm TOOL SPINDLE Redpsyf Angefx Adasn Power: 5 kW Torque: 6 to 800 min⁻¹ Max speed: 30,000 min⁻¹ Clamping force drawbar: 2,000 N Locking torque: mechanical by straight-tooth coupling Tool shank interface: HSK 40 (A or E) Tool clamping force: 1,000 daN TOOL CHANGER Number of positions: 30 (for HSK 40) CNC control: Fanuc 30i/31i type Y Axis (cross axis) Travel: 200 mm Power: 4.8 kW Feed force: 240 daN Resolution: 0.0001 mm Rapid traverse (G0): 50 m/min Feed rate (G1): 20 m/min Measuring system: glass scale Z Axis (longitudinal axis) Travel: 400 mm Power: 7.2 kW Feed force: 360 daN Resolution: 0.0001 mm Rapid traverse (G0): 50 m/min Feed rate (G1): 20 m/min Measuring system: glass scale Includes 8 kW cooling unit and integration of an emergency stop system. Inventory no. 2220114, machine includes: CONTROL Fanuc 30i/31i, with 14” screen LINEAR MOTOR FEED OPTION for Y and Z axes TURNING-MILLING FUNCTION With integrated indexing system (8 positions) on the tool spindle, tool changer adapted for HSK40-A, spindle speed increase to 5,500 min⁻¹ WORKPIECE RE-CLAMPING UNIT "PRM" WITH 4 POSITIONS FOR 6-SIDED MACHINING: When not in use, the unit is protected under the main spindle C1. The re-clamping unit moves on the W axis, which is parallel to axis C. Max W axis speed: 40 m/min. Travel on W axis: 310 mm. Equiped with: 2 vices – force at 5 bar: 3,500 N; 1 tailstock. SPINDLE BORE CAPACITY UPGRADE Increase from 1 to 50 mm (main spindle) TOOL MEASURING DEVICE "RENISHAW" T27 Tool length measuring for turning tools. Routine detection via M-code. Automatic tool breakage control. TOOL MAGAZINE EXTENSION Capacity increased from 30 to 60 positions COOLANT THROUGH SPINDLE 100 bar, 25 L/min, 400 L tank HP PREPARATION & ADAPTATION FOR MILLING SPINDLE Mechanical and electrical integration of turning clutch. WORKPIECE UNLOADING CONVEYOR Left side machine discharge, adjustable speeds PAPER BAND FILTRATION SYSTEM CLAMPING SYSTEM FOR F-48 COLLETS ADAPTATION FOR W-20 COLLETS PREPARATION FOR BAR FEEDER INTEGRATION Technical data provided without engagement, errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 8 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, pivoting range: 340 °, table length: 5,000 mm, table width: 1,730 mm, table height: 300 mm, Technical Specifications Travel Paths • X-axis (bed): 5,000 mm • Y-axis (vertical): 1,600 mm • Z-axis (spindle head): 1,500 (1,200) mm Control System • CNC control: Heidenhain TNC 415 Feed Rate • X, Y and Z axes steplessly adjustable from: 2 – 8,000 mm/min Universal Milling Head in Orthogonal Design • Motor-driven milling head swivel range: 340 degrees • Milling head swivel range: 180 degrees • Tool holder: SK 50 Rjdpfjyf Ai Rex Adaon Clamping Table • Clamping surface: 5,000 mm x 1,730 mm • T-slots: 9 x 28 DIN 650 • T-slot spacing: 160 mm Year of Manufacture: 1992 Partial overhaul: 2025 The machine has been recommissioned and inspected at MBM. It can be demonstrated under power at D-73479 Ellwangen. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Our services: - Used machinery - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used CNC milling machine – used boring and milling machine – used metal milling machine – used metalworking mill – used CNC mill – CNC milling machines – CNC milling centers – milling machine – large-part machining – CNC large-part machining – milling – SHW – UF6 – UF 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: used, The Servomill® UFM 8 V, a state-of-the-art Conventional Vertical Milling Machine from KNUTH, is designed to enhance efficiency and precision in various machining applications. With its horizontal spindle and swiveling vertical milling head, this robust machine boasts a wide speed range and a large clamping table that accommodates various workpieces and clamping devices. The Servomill’s advanced electronic features, including infinitely variable servomotor feed and electronic handwheels, provide users with the intuitive operation reminiscent of CNC systems without the need for programming. Ideal for repair workshops and training departments, the UFM 8 V combines conventional milling practices with significant advancements in reliability and maintenance-free operation, thanks to high-quality servo drives and preloaded ball screws. With an operational output of up to 5000 rpm and integrated features such as a coolant system and pneumatic tool clamping, this model promises both productivity and ease of use. Experience the next level of milling technology with the Servomill UFM 8 V. Request a quote today to see how this remarkable machine from the Conventional Vertical Milling Machines product group can elevate your production capabilities. Rodpfxjv Amixe Adajn

Condition: used, Description Digital display (3 axis) Technical data: Clamping surface 1100 x 300 mm Longitudinal travel 700 mm cross travel 250 mm Vertical travel 470 mm Spindle speeds 45 - 2000 rpm. ISO 40 mounting 12 milling feeds Rods Twi Hspfx Adaen Longitudinal and transverse 18 - 800 mm/min. vertical 7,2 - 320 mm/min. Drive motor of the milling spindle 7 PS Drive motor of the table 1,5 PS Machine weight approx. 2050 Kg

Condition: excellent (used), Control: Heidenhain TNC 310 With dividing head Travel X/Y/Z 500/250/160 mm Travel W 480 mm Clamping area (L x W) 885 x 320 mm Permissible table load 250 kg Distance table to spindle nose 0 – 605 mm Feed rate X/Y 1 – 2000 mm/min Feed rate Z 1 – 1200 mm/min Rodpfowkrn Ijx Adaen Tool quick-change system SF 32 Speed range (infinitely variable): 9200 rpm Drive power 5 kW Space required (W x D x H) 1850 x 2550 x 2400 mm

Condition: used, Year of construction: 2009, Control: Heidenhain TNC 320 Table Clamping surface: 1200 x 450 mm T-slots: 6 x 18 H7 mm Max. load: 400 kg Feeds Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm Feed: stepless Rapid traverse X, Y: 4000 mm/min Rapid traverse Z: 1500 mm/min Feed motor AC (Z): 3.0 (10.5) Nm Spindle Speed range, stepless: 55 – 3000 rpm Rsdpfox H Iyrox Adasn Spindle taper: ISO 40 Spindle gearbox: frequency controlled, 2-stage Spindle motor: 7.5 kW Swiveling head: 0 - 140° Dimensions Length: 2200 mm Width: 1800 mm Height: 2000 mm Weight Net weight: 2100 kg Gross weight: 2300 kg

Condition: excellent (used), Year of construction: 2005, Heidenhain digital display Fehlmann cross table KS 322 D Rodpewkrp Eefx Adaen Working area: Z-axis quill stroke 110 mm Machine head travel 450 mm Table spindle nose 0 – 527 mm SF 32 quick-change system Work spindle 2.9 kW Speed range continuously adjustable 50 – 6300 rpm Clamping surface 320 x 670 mm Dimensions and weight: Space required W x D x H 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg

Condition: excellent (used), Year of construction: 2011, Heidenhain i TNC HR 41530 control HR 410 portable electronic handwheel Table dimensions: 1000 x 450 mm Longitudinal travel: 750 mm Rodsyc R Ngepfx Adasn Cross travel: 450 mm Vertical travel: 525 mm T-slots (width x number x pitch): 14 x 5 x 80 mm Rapid traverse (longitudinal and cross): 12,000 mm/min Rapid traverse (vertical): 12,000 mm/min Spindle motor power: 11 kW AC servomotor for longitudinal and cross axes: 7.5 Nm AC servomotor for vertical axis: 7.5 Nm Spindle taper: ISO 40 Weight: 3,500 kg