Used Water Treatment Plant for sale (10,637)

Condition: used, Year of construction: 2015, Electronically controlled dual system for softening particle-free water. With two pressurised tanks made of GRP. Freely adjustable cycles with time or quantity-controlled regeneration. With brine tank. Additional title: Double system with GRP tanks, Softening with a resin ion exchanger Operating pressure: 8 bar Operating temperature: 40 °C Voltage: 230 V Frequency: 50 Hz Material: vessels from GFK Features: Pre-filter, valve block, water meter, 2 x GRP tanks, various hoses Dodpfx Aow U D S Eedujwc

Condition: used, functionality: fully functional, * Model: The model number is MG160MB4-42FF300-F1. * Power (P_2): This motor has a power output of 11.0 kW, which is equivalent to about 15 horsepower. * Voltage (U): The motor is designed to operate on two different voltage configurations, likely a delta (Δ) and a star (Y) connection. * For a 50 Hz power supply, it can run on 380-415V with a current of 21.6-20.4A, or 23.8-22.4A at the lower voltage. * For a 60 Hz power supply, it can run on 460-480V with a current of 21.0-17.8A or 23.0-19.6A at the lower voltage. * Frequency (Hz): The motor is rated for both 50 Hz and 60 Hz operation, making it suitable for use in various regions worldwide. * Power Factor (cos \phi): The power factor is listed as 0.85-0.84 for 50 Hz and 0.90-0.83 for 60 Hz. This indicates how efficiently the motor uses electrical power. A power factor closer to 1.0 is more efficient. * Efficiency (\eta): The motor's efficiency is specified as 91.0-92.0% at 50 Hz and 97.4-93.0% at 60 Hz. This is a crucial metric, as it shows the percentage of electrical power converted into mechanical power. * Speed: The motor's speed is listed in revolutions per minute (min^{-1}). For 50 Hz, the speed is 1460-1470 min^{-1}, and for 60 Hz, it is 1750-1770 min^{-1}. This confirms it's a 4-pole motor since the speeds are slightly less than the synchronous speeds of 1500 RPM (for 50 Hz) and 1800 RPM (for 60 Hz), which is typical for an induction motor. Other Details The upper nameplate provides more general information: * Serial No.: The unique serial number for this motor is 5496. * Ingress Protection (IP) rating: The motor has an IP55 rating, which means it's protected against dust ingress and low-pressure jets of water from any direction. * Bearings: The bearing types are specified as 6309.C4 (DE, likely "Drive End") and 6309.C4 (NDE, likely "Non-Drive End"). These are standard deep groove ball bearings. * Grease: The recommended grease is UNIREX N3 ESSO. * Protector Type: The motor has a thermal protector, specifically a PTC 160°C TTP211. This protects the motor from overheating. Dodpfexcf Hrjx Adujwc * Weight: The motor's weight is listed as 98 kg.

Condition: ready for operation (used), Year of construction: 2024, operating hours: 865 h, functionality: fully functional, machine/vehicle number: 99404000000, Complete Pre-Treatment Plant for Commercial Waste // GewAbfV compliant For sale: a complete pre-treatment plant for commercial waste in accordance with the German Commercial Waste Ordinance (GewAbfV), by Doppstadt MMAK – Modular Processing Plant + Conveyor Belt + Accessory Package – Mobile & Efficient Comprehensive package for mobile, scalable waste processing Ideal for waste management companies, composting facilities, biomass yards, or the construction industry Description: Available for sale is a complete mobile and modular processing plant (MMAK) from Doppstadt Umwelttechnik GmbH, including extensive accessories. The plant is perfectly suited for the pre-treatment of commercial waste and mixed construction waste, as well as contaminant removal from organic waste. Highlights: • Flexibly combinable components (e.g., Selector 400, air separator, sorting belts) • Fully compliant with GewAbfV • High separation efficiency (metals, plastics, paper, wood, packaging paperboard) • Mobile, CE-compliant, can be controlled via emergency stop interlinking • Diesel or electro-hydraulic drive available Includes DMB 8500 FLEX Conveyor Belts: • Lengths: 5 / 6 / 8.5 m • Belt width: 1,200 mm • Suitable for continuous operation, low noise (≤ 75 dB(A)) • Low-maintenance, robust construction Additional Main Components: • Doppstadt METHOR: mobile single-shaft shredder, hook-lift chassis, extremely versatile (e.g., commercial waste, organic waste, mattresses), heavy-duty design • Selector 400 with spiral shaft technology: efficient contaminant removal in hard-to-screen material flows, low operating costs • Mobile air separator (DMT-WS): reliably separates light contaminants (e.g., films, paper), continuously adjustable, 16.5 kW hydraulic drive • Sorting belt (auxiliary belt): for material metering, allows manual post-sorting • Hydraulic power unit Hydrapack HP90: for supplying energy to auxiliary components • Modular conveyor belt DMB 8500 FLEX: 8.5 m length, 1,200 mm belt width, suitable for continuous operation • Pallax Foam misting system (PF1) – compliant with TA Luft Advantages of the Plant: Dodsw Hdwyspfx Adujwc • All modules are CE-compliant, mobile, and can be used individually • Emergency stop interlinking possible • Small footprint and low operating costs • Compliant with GewAbfV & TA Luft • Rapid setup, compact transport dimensions We are open to discussions – purchase, takeover, hire purchase or leasing options possible. For serious inquiries, we are happy to provide a detailed personal briefing. Price: negotiable Location: Mecklenburg Vorpommern Contact: Mr. Tchorz Viewing on request – rapid availability!

Condition: good (used), Emulsion splitting system, oil-water separation system Djdsgvu Tgjpfx Aduswc (for the removal of condensation water from compressors) The most cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water complies with the legal regulations for sewer discharge

Condition: ready for operation (used), Year of construction: 2014, Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible. Dsdpsru Hviefx Aduswc

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 73965, Technical specifications: • Manufacturer: Rösler Oberflächentechnik GmbH (Germany) • Model: Centrifuge Z 1000 • Year of manufacture: 2016 • Motor power: 11.0 kW • Power supply: 400 V / 50 Hz • Maximum speed: 2,650 rpm • Maximum load: 65 kg • Maximum throughput: 1,000 l/h • Maximum liquid temperature: 40 °C • Maximum charge material temperature: 50 °C • Drum inner diameter: 500 mm • Machine weight: 1,200 kg • Serial number: 73965 New cutting blades, seals, and centrifuge bearings. Fresh water tank 1x 2,000L and waste water tank 1x 2,000L and sludge trolley. Dwedpfx Asw Rc Aneduoc Automatic process water refill.

Condition: used, Year of construction: 1998, Additional title: reverse osmosis plant Dwsdpfx Aow U A Uredusc Capacity: 6 m³/h Length: 3,7 m Width: 0,85 m Height: 2,1 m Weight: 1000 kg Features: Reverse osmosis system, scale saturation tank, permeate tank, HMP dosing, milk of lime preparation station, various pumps, valves and measuring probes

Condition: excellent (used), ViscoTreat Inline degassing system Dsdpfow N Iw Usx Aduewc Highly filled adhesives perfectly processed using ViscoTreat-Inline With the ViscoTreat series of systems, e.g. ViscoTreat-Inline, ViscoTec offers the optimal solution for batch and continuous material processing. These are installed as a preliminary measure for dosing applications for low to high viscosity adhesives, thermal and solder pastes. In order to ensure accurate dosing results for highly filled materials, their preparation prior to application is essential. Fillers often tend to sediment and agglomerate during longer storage and downtimes of the dosing system. This makes it impossible to apply the medium accurately. Dosing systems can become clogged and wear on system components increases due to the separation of the fillers from the binder. Furthermore, there are significant deviations in the mechanical properties of the dosing medium. Manufacturer: ViscoTec Designation: ViscoTreat Inline Degassing 25L Comm. No. AT-14-1906 Container volume: 25 liters Weight: approx. 200 kg You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 2003, With waste transport trolley Width: 1000 mm Height: 2770 mm Depth: 1500 mm Condition: used Dwsdpfxsw Iql Sj Aduoc

Condition: used, functionality: fully functional, Chemical reactor (mixer) with water treatment for sale! 2 containers x 3 cubes 1 container x 1 cube Electronic control (Siemens, Delta) Scale Dispensers Mixers Dodpfx Adow Nh Rzoujwc Water purification device Stainless steel frame

Year of construction: 2016, condition: excellent (used), Actini Effluent treatment plant, 2016, Effluent treatment system, used for fermentation aquarius effluent water, consists of Ziemex 20,000L accumulation holding vessel, then into decontamination plant with heat exchangers, then into two 20,000L neutralization tanks for PH balancing, water is then clear to be reused or disposed into drainage Dwjdpfxow Dykwj Adujc

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0312, pressure: 6 bar, temperature: 35 °C, Equipment: CE marking, documentation/manual, Reverse Osmosis device fully functional, last operated 12.2024 in production. Dwsdpfsw Ickgsx Adujc

Condition: used, Additional title: with automatic regeneration Nominal flow: 9800 l/h Pressure working area: 6 bar pressure class: 8,5 bar Operating temperature: 25 °C Ambient temperature: 35 °C Current: 0,35 A Voltage: 230 V Frequency: 50 Hz Dwedpjw Tbunjfx Adusc Weight: 390 kg Features: 2 x softening tanks (resin-filled); brine tank; valves and pipes

Condition: good (used), Year of construction: 2014, operating hours: 50,000 h, functionality: fully functional, Feed water deaeration unit, partial deaeration, with equipment and switch box. Available in January 2025. Dwjdpfxetx Ub Es Adujc

Year of construction: 2007, condition: good (used), Filtration unit consists of: water tank, gravel filter, pressure pump, activated carbon filter. System for insulating glass production line. Width: 2000 mm / water tank 2100 mm. Dsdpfx Adsw I Hgrsuowc Height: 2200 mm / water tank 1700 mm. Depth: 600 mm / water tank 750 mm. Weight: approx. 250 kg / water tank: approx. 100 kg.

Condition: used, Osmosis / water treatment system with Heyl testomat 2000 further details and scope of delivery see photo. Technical data see type plate. Djdpotzxuyefx Adujwc Item condition: used, untested condition: used, untested sample photos sample pictures A viewing in Rietberg is possible! If you have any further questions, please contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material and legal defects! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: used, functionality: fully functional, Item: DP-107503 Water Pasteurization plant GEA, Water Pasteurizing plant Capacity 2.500 L/H Consisting of the following: - 4 centrifugal pumps - 1 Grundfos water circulation pump - 1 plate exchanger - 1 pipe exchanger - Samson valves + div. back pressure and control valves - 1 holding cell Control panel Dwedstrhbqopfx Aduoc - piping Monted at Stainless Steel support structure

Condition: good (used), Year of construction: 2012, functionality: fully functional, TECHNICAL DETAILS Area of application: bottling of water without CO₂ Installation location: mineral water factory in France Performance and capacity Max. performance: 32,000 bottles per hour Bottle size: 1.5 l Suitable mouth: 29/25 Capping system Capping machine: Zalkin Number of closing elements: 18 Capping holder: pick-and-place system Dwjdpjv Iqpasfx Adusc Capping feed: yes Enclosure: yes Working direction Operating direction: clockwise (left to right)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport - tilting table (discharge) Description of Line Components Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated for by tilting the suction frame. The suction frame has a rotating function to collect short formats in an upright position and to place them down on the long edge. Light crane Trolley crane with a lift system traveling on rails by hand, which are standing on steel supports. lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. Dwsdpfxowii Hfj Adujc A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustic signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulkollan transport rollers. In vertical position transport rollers with Perbunan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Driven by a geared motor, A.C., frequency-controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Transport rollers, which are individually driven by worm gear wheels are placed on a solid welded frame. The transport rollers are arranged in drag bearings. Tilting arms are in horizontal position. The integrated tilting table is made of several profile arms which can be tilted (electro-mechanical by crank mechanism) from the horizontal position by 84°. The tilting speed has its lowest speed at the beginning and at the end of the movement. The glass is tilted from vertical to the horizontal position. If no glass happens to be in the Pre-Heating oven the glass runs into the oven.

Condition: new, Year of construction: 2017, Gas flame treatment plant Arcotec FTS 4005 DR som, year KW42/2017, machine is new and unused and has CE marking, operating voltage 400V, power 7kw, gas type preset propane it can also be used natural gas, Burners 4x MB3-500S/2E, treatable material are metal sheets, Dwjdpfed Rik Aex Adusc The gas flame treatment plant is intended exclusively for the thermal pre-treatment of metal sheet surfaces in order to improve the adhesion of ink, laughter, adhesives, foam, etc. Machine has cost over 200000€!!

Condition: used, Year of construction: 2007, With waste transport trolley Width: 1000 mm Height: 2550 mm Depth: 1500 mm Dwjdpfsw Ivk Hjx Aduoc Condition: used

Year of construction: 2014, condition: new, functionality: fully functional, Biorock D10 small wastewater treatment plant for 10 PE, consisting of a plastic tank with a filter layer, aeration and sampling shaft, and a filter brush. Maximum capacity: 10 PE Primary treatment: > 5,000 l Bioreactor: 3,000 l Dwjdpfx Asv Iv U Usdujc In mint condition, installed but not yet commissioned.

Year of construction: 2022, operating hours: 0 h, condition: new, Mobile cleaning centrifuge including buffer storage for dirty water, agitator and double membrane compressed air pump. - new machine - numerous other variants and special designs on request Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing technology, general solid-liquid separation, cooling lubricant processing, wet blasting systems, ... Benefits: - High discharge through acceleration forces acting in the system of over 1800 times the acceleration of gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment Dsdjf Sqfqopfx Adujwc - Saving of expensive additives for the vibratory grinding process (compound) - Economical and efficient separation of solid particles from a mixture - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70 ° C (optional cooling available) - frequency-controlled motor drive for smooth acceleration and braking of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the field of vibratory grinding, drying and process water technology, which are precisely tailored to your application. From development to production: We deliver all of our products from a single source and everything is "Made in Germany". ----- Please just contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: as good as new (ex-display), Year of construction: 2025, Parts Cleaning Machine / Combination Spray Cleaning System Type L101 HP automatically working hot water parts washer with basket drive by means of gear motor, stainless steel washing pump (Lowara), spray system with stainless steel nozzles additional manual cleaning with high pressure nozzle (60 bar) and foot switch, air blow-off gun, large viewing window with gauntlet gloves, LED interior lighting - Basket diameter: 910 mm - useful height: 490 mm - max. loading weight: 200 kg - Spray pressure (washing pump): 2.3 bar - spraying pressure (HD pump): adjustable up to max. 60 bar - tank volume: 175 litres - Heating: electrically adjustable (RT - 60°C) Dsdpfxed R Ahle Adujwc - plant dimensions (LxWxH): 1.300 x 1.500 x 2.100h mm - empty weight: approx. 200 kg ++washing time clock freely adjustable (minutes and hours) ++complete cleaning machine (interior and exterior cladding) made of ++stainless steel 1.4301 ++Water circulation and loading basket made of stainless steel 1.4301 ++Bath cover with fine filter (2.000 micron) ++Operating hours counter ++Steam vapour extraction incl. condensate recirculation ++Omron timer for setting the time in sec./min./hour. Parts washer is as good as new (test plant/technical centre); Year of construction: July/2021 OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Condition: used, Year of construction: 2007, functionality: unexamined, Complete plant for cleaning, treatment and classification of green molding sands for sale. The plant consists of conveyor belts with weighing scale, vibrating feeders, vibrating screens, pumping units, storage silos for incoming and outgoing product, overband, sand cleaners, dryer, buckets, trommels, water cooler, scrubber, filter press, dust suction... electrical panels included. Few hours of use. All the technical information of the plant is available. Complete installation for cleaning, treating, and classifying green molding sands for sale. The installation includes conveyor belts with weighing scales, vibrating feeders, vibrating screens, pumping units, storage silos for input and output products, overbands, sand cleaners, dryer, buckets, trommels, water cooler, purifier, filter press, dust extraction system, and electrical panels included. Few hours of use. We have all technical information of the machines. Dwodpfxet E U Eco Aduec