Used Water Battery for sale (13,674)

Condition: reconditioned (used), Year of construction: 2021, operating hours: 1,681 h, functionality: fully functional, working width: 550 mm, area performance: 3,025 m²/h, overall weight: 380 kg, warranty duration: 12 months, water tank capacity: 75 l, TASKI SWINGO 2100 µicro SCRUBBER NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2021 with 1681 hours of operation 550mm cleaning head equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and new suction hoses. The suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Nedpfx Asymd S Nohvocn Model: Taski Swingo 2100 µicro Power supply voltage: 24 V Brush working width (mm): 550 Suction width (mm): 630 Theoretical capacity (m²/h): 3025 Clean/dirty water tank capacity (l): 75/75 Working speed (km/h): 5.5 Number of brushes (pcs): 2 Brush rotation speed (rpm): 190 Weight without batteries (kg): 185 Total weight, ready to use (kg): 380 DIMENSIONS: Length with squeegee (mm) 1380 Height (mm) 1280 Width with squeegee (mm) 630 INCLUDED: NEW 6V 175Ah SIAP GEL BATTERIES (x4) NEW 280mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 75-liter tank allows for a large amount of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the cleaned surface. The large working width (550 mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 431 h, functionality: fully functional, working width: 650 mm, area performance: 4,200 m²/h, overall weight: 706 kg, warranty duration: 12 months, water tank capacity: 116 l, HAKO SCRUBMASTER B115 R TB650 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2017 with 431 hours of operation. 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction width (mm): 860 Theoretical capacity (m²/h): 5200 Clean/dirty water tank capacity (l): 116/116 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 706 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE Nsdpsymdpbefx Ahvecn KEY FEATURES: The 116-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: like new (used), Year of construction: 2013, operating hours: 2,668 h, load capacity: 1,200 kg, lifting height: 2,850 mm, fuel type: electric, mast type: duplex, construction height: 2,020 mm, Manufacturer + model: BT SWE 120 S Atex *EX* Mitrex 2D / Zone 21 Mast: 2F2850 ID: 23021.7862 Mast: 2F2850 Lowered height: 2020 mm Lifting height: 2850 mm Capacity: 1200 kg Year: 2013 Operating hours: 2668 hours Battery: NEW * 24v / 300ah * Year 2023 Options: VERY unique counterbalance stacker in EX version!! *EX* Mitrex! System = ATEX 94/9/EC Gas group = IIIB (non-conductive dust) Type = 2D (allowed in Zone 21) Temperature class = T4 (135 °C) Equipped with: - FFL mast – 2-stage - Cantilever adjustable forks Nodpfx Ajx Rt N Hohvscn - SUITABLE for all types of pallets

Condition: like new (used), Year of construction: 2013, operating hours: 2,071 h, load capacity: 1,200 kg, lifting height: 2,850 mm, fuel type: electric, mast type: duplex, construction height: 2,020 mm, Manufacturer + model: BT SWE 120 S Atex * EX * Mitrex 2D / Zone 21 Mast: 2F2850 ID: 23021.7904 Mast: 2F2850 Lowered height: 2020 mm Lifting height: 2850 mm Ncodpfx Ajx Rt Nyshvon Capacity: 1200 kg Year: 2013 Operating hours: 2071 h Battery: NEW * 24v / 300ah * Year 2023 Options: VERY unique CONTRA stacker EX version!! * EX * Mitrex!!!!! System = ATEX 94 / 9 / EC Gas group = IIIB (non-conductive dust) Type = 2D (For use in Zone 21) Temp class = T4 (135 °C) Equipped with: - FFL mast – 2-stage - Freestanding adjustable forklift forks - SUITABLE for all types of pallets

Condition: reconditioned (used), Year of construction: 2015, operating hours: 720 h, functionality: fully functional, working width: 9,020 mm, area performance: 5,800 m²/h, overall weight: 727 kg, warranty duration: 12 months, water tank capacity: 116 l, HAKO SCRUBMASTER B115 R TB900 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2015 with 720 hours of operation. 900mm cleaning head (TB900) equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 900 Suction width (mm): 1100 Theoretical capacity (m²/h): 5800 Clean/dirty water tank capacity (l): 116/116 Number of brushes (pcs): 2 Ncjdpfx Ahjymb R Asvjn Brush speed (rpm): 210 Total weight, ready to use (kg): 727 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 116-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (900 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: used, Year of construction: 2020, x-travel , mm y-travel , mm z-travel , mm STM MASTERCUT Waterjet Cutting Systems Ncedpfx Aoxtqxbjhvsn The all-round system for demanding requirements ----- MASTERCUT waterjet cutting systems are the perfect all-rounders for demanding cutting tasks. MasterCut waterjet systems offer the ability to create three-axis 3D cuts or sophisticated 2D cuts. The systems operate in a resource-efficient manner and are characterized by extremely low power, water, and air consumption. All structural components and screws are made of wear-resistant stainless steel or aluminum. Characteristic features include the flat underbody and smooth side walls with concealed linear guides without bellows and a high-pressure pipe integrated into the axes. The fully digital drive consists of a brushless AC servo motor with a multi-axis NUM or Eckelmann CNC control. The associated software runs on MS Windows and requires only a standard PC. ----- Advantages of MasterCut waterjet cutting systems Highest process reliability Automatic workpiece scanning and collision protection enable safe working. STM waterjet cutting systems can be marked as standard, and the use of the positioning laser allows for easy workpiece setup. Profitable and sustainable STM systems are characterized by low operating costs. The waterjet cutting systems are designed to use as little compressed air, electricity, and water as possible. SmartCut cutting software The easy-to-understand SmartCut waterjet cutting software can be adapted to your specific requirements through modular extensions. All parameters can be intuitively set and DFX files can be imported directly within the graphical user interface. Maximum operating comfort STM waterjet cutting systems are accessible from three sides. Control is via a standard Windows PC, and additional features such as manual control enable maximum operating comfort. ----- Technical specifications: Travel speed 15 m/min Positioning accuracy ± 0.08 mm (per meter at 20°) Repeatability ± 0.05 mm (per meter at 20°) Z-axis clearance 180 / 240 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Working area 4000 x 2000 mm Njdpfeykulnex Ahvecn Cutting power 4000 bar

Condition: good (used), Year of construction: 2003, RIBO BE-AL-F1 dust extraction , water extraction vacuum filter, separator for grinding , polishing , cutting , brushing , deburring , aluminum and metals wet. Extraction made of stainless steel. Nsdpfx Aetpwrqohvocn The vacuum fan is located behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. Ideal filter for extracting and filtering hot and flammable or highly hygroscopic dusts that do not allow the use of traditional cartridge or bag filters, guaranteeing reduced maintenance costs. Recommended for use in mechanical workshops, it is ideal for grinding, brushing and metal polishing departments. Eex 1.85 Kw fan Capacity 1600 m3/h Vacuum of 2500 Pa

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels Ncedpfx Asx R Sv Sohven

Condition: ready for operation (used), Fully Equipped Water-Based Paint Factory Sale or lease of the entire site or individual plant components - Over 50 mixing and stirring tanks (stainless steel) - 5 horizontal ball mills (including Netzsch ZWM 88) for fine dispersion - Extensive dispersing, dissolver, and transfer systems Ncedeyknluopfx Ahven - Tank farm with tanker and container unloading - Filling lines for small and large containers - High-bay warehouse with approx. 2,300 pallet spaces - Container cleaning system - Laboratory, workshop, office, and social areas - Complete utilities, cooling, ventilation, and safety technology (EX design) The existing infrastructure allows for flexible utilization – from immediate production start-up and capacity expansion to project-based or temporary usage concepts. This makes the site attractive for both strategic buyers and lessees/tenants. Further details, technical specifications, and layout plans available on request.

Condition: excellent (used), mileage: 801,058 km, power: 315 kW (428.28 HP), first registration: 01/2006, fuel type: diesel, tire size: 385/55 R22,5, axle configuration: 6x2, wheelbase: 6,700 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: other, total length: 10,240 mm, total width: 2,530 mm, Year of construction: 2006, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, power assisted steering, = Additional Options and Equipment = - DAB radio - High beam headlights - Air-suspended seats - Panoramic roof - Radio/CD player - Sleeper cab - Sun visor - Pre-heating system = Remarks = TRANSPORT TO ANTWERP 590 EURO = Further Information = Technical details Number of cylinders: 6 Engine displacement: 12,580 cc Axle configuration Brakes: Disc brakes Front axle: Tyre size: 385/55 R22.5; Max. axle load: 7,500 kg; Suspension: Parabolic springs Rear axle 1: Tyre size: 295/80 R22.5; Twin tyres; Max. axle load: 11,500 kg; Suspension: Air suspension Rear axle 2: Tyre size: 295/80 R22.5; Twin tyres; Lift axle; Max. axle load: 7,500 kg; Suspension: Air suspension Weights Unladen weight: 14,764 kg Payload: 11,736 kg Ncedpoyl S Ddofx Ahvon Gross vehicle weight: 26,500 kg Condition Technical condition: very good Visual condition: very good Identification Reference number: 80

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Air conditioning unit for 330 m² workshop area / 18,000 m³/h. 100 litres of cold water are filled into the lower part of the unit, pumped upwards and then slowly flow down through honeycomb pads. The powerful fan distributes the pleasantly cool air. Ncjdpfx Aheyl R Unjvsn Cools very well even without water. Remote control and description included.

Condition: like new (used), Year of construction: 2018, operating hours: 6,472 h, load capacity: 2,000 kg, lifting height: 4,650 mm, fuel type: electric, mast type: triplex, construction height: 2,130 mm, Manufacturer + model: LINDE E 20 L - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 * Mast: 3F4650 ID: 26037.5931 Category: Used Mast: 3F4650 Lowered height: 2130 mm Lifting height: 4650 mm Capacity: 2000 kg Year: 2018 Hours: 6472 hours Battery: Completely NEW * 48v /625Ah * Built 02/2026 Options: CONTAINER specifications!! * EX * Proplan!!!!! Ncsdpfxeyl Rqvj Ahvon System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (approved for ZONE 1) Gas group = IIB Temperature class = T4 Type = Cat 2D (approved for ZONE 21 - Dust) Gas group = IIIB Temperature class = T 135 °C - IP 6X Equipped with: - Joystick drive forward/reverse - Triplex FFL mast - Front spotlight - Flashing beacon - Blue spot safety light - New tyres (ATEX specs)

Condition: excellent (used), For sale: complete fire-fighting trailer equipped with a professional ALCO MONITOR water cannon. The set is fully mobile – ideal for fire brigade use, fire protection, and securing large areas (fuel depots, sawmills, production plants, storage yards). Technical condition: • ALCO / MONITOR water cannon – heavy-duty cast iron construction • Full adjustment of direction and spray angle (control wheels) • Directional nozzle on extended boom • KALI Anhänger Service GmbH trailer, GVW 700 kg • Hitch: Peka Fahrzeugbau, type DV127 • Two side tanks with filling ports Nsdpsx Edrrsfx Ahvocn • Shut-off valves, fire-fighting quick couplings • Stabilizing supports with height adjustment • Lighting installation, fenders, wheels in very good condition • Well-maintained, complete, ready to use Applications: • Voluntary/Professional fire brigades • Large production facilities • Timber yards, sawmills • Chemical and fuel plants • Securing mass events • Extinguishing fires from a great distance / high water flow

Condition: used, Year of construction: 1999, operating hours: 500 h, machine/vehicle number: LC392, Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the first stage of washing, using cold water. Wash with warm water and detergent through nozzles: This is the second stage of washing, which uses warm water at 50°C with detergent. Rinse with cold water and disinfectant through nozzles: This is the last washing stage, which uses cold water and disinfectant. Bottle filling outlet conveyor: The bottles are filled here, two at a time. UV Filter: The water is filled through a UV filter, which is built into the water inlet of the bottle. Transport of filled bottles to the capper: Here, the bottles are transported from the filler to the capper. Dosage caps through disinfectant on the bottle: Here, the caps are disinfected and ready to be put on the bottles. Bottle cap cylinder: Here the bottle cap is applied. Output conveyor: From here, the bottles are manually loaded onto pallets. Each part of this system has a specific role in the process of bottle filling, and all together they form a functional production Used Water Complete Bottling Line. Njdpsvgud Sefx Ahvscn

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Electronic water metering device with temperature display Your advantages: fast and exact entry of the amount of water Nedpfx Ajfmciijhvjcn clear control panel with large, bright display compact and dustproof stainless steel housing easy connection to an ice water system with automatic repeat Technical specifications Dosing quantity range: 0.1 l - 999.9 l Temperature accuracy: display only Dosing accuracy from 1 l: +/- 0.1 l Water flow at 3 bar: up to 30 liters / min Water connection: 3/4 "external thread Power connection: 100 - 240V; 50Hz Appliance dimensions W x H x D: 200 x 300 x 130 mm NEW device with warranty Visit us at the Milbrandt outlet shop

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Ncjdsvw A T Nepfx Ahven Factory number year of manufacture 2007 Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Ice water facility L 100 model Recommended batch size up to: 30 liters Continuous output * (cooling output): 60 liters Peak cooling performance * with ice bank: 180 liters / h Ice bank: 20kg Cooling capacity (CECOMAF) t = -5 ° C: 1189 W Voltage: 230V; 50Hz Power consumption: 575W Water connection: 1/2 " Water flow at 2 bar: 8 liters / min Device dimensions L x W x H mm: 950 x 530 x 560 Weight empty / operation approx .: 60kg / 130kg Energy consumption at 100 liters: 1-2 KWh NEW device with warranty * with + 17.5 ° C inlet and + 2.5 ° C outlet. Technical changes reserved. Nodpfxefmciko Ahvscn Option: Underframe Visit us at the Milbrandt outlet shop

Condition: new, mileage: 1 km, power: 325 kW (441.88 HP), fuel type: diesel, tire size: 295/80 R 22.5, axle configuration: 6x4, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 590 l, color: white, driver cabin: day cab, gearing type: semi-automatic, number of gears: 16, emission class: euro3, suspension: steel, loading space volume: 20 m³, Year of construction: 2023, = Additional options and accessories = - PTO = Further information = General Information Year of manufacture: 2023 Technical Information Number of cylinders: 6 Gross vehicle weight (GVW): 33,500 kg Axle configuration Tyre size: 295/80 R 22.5 Brakes: Drum brakes Nsdpfx Ahexvz Sqevjcn Suspension: Leaf suspension Front axle: Max. axle load: 7,500 kg; Steered Rear axle 1: Max. axle load: 13,000 kg; Reduction: Outer planetary axles Rear axle 2: Max. axle load: 13,000 kg; Reduction: Outer planetary axles Functional Body brand: EFEMMAK Number of chambers: 1 Pump: Yes High-pressure pump: Yes Water installation: Yes Hoses: Yes

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: TET051P3-20 - 2200409868, cooling capacity: 13.4 kW (18.22 HP), type of input current: three-phase, type of cooling: water, overall weight: 336 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 2.26 m³/h, pump pressure: 2.77 bar, total width: 660 mm, total length: 1,315 mm, total height: 1,373 mm, warranty duration: 3 months, Equipment: type plate available, Process chiller / air-cooled water chiller, Type: TAEevo Tech 051 P3-20 Manufacturer: MTA S.p.A. The TAEevo Tech 051 P3-20 is a compact air-cooled water chiller, suitable for outdoor installation (temperature range -20°C to +46°C). Includes crankcase heater, phase monitoring, 155 l buffer tank, built-in P3 circulation pump, and condenser pressure control with variable speed fans. Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 13.4 kW Chilled water temperature out/in (°C): 7 / 12 Flow rate (m³/h): 2.26 Available pump pressure (bar): 2.77 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 8 Max. current (A): 13 Starting current per circuit (A): 70 Protection class: IP54 Dimensions: Length (mm): 1315, Width (mm): 660, Height (mm): 1373 Weight (kg): 336 Connection: Rp 1 1/2" Serial no.: 2200409868 Year of manufacture: 2024 Condition: Visual 2, Technically OK Used Price: On request in Euros (plus VAT, ex works Nettetal) – 3-month warranty Used machines may have visual defects due to previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal Njdpfjylmnwex Ahvscn

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 6,962 h, load capacity: 1,500 kg, lifting height: 3,300 mm, load center: 500 mm, fuel type: electric, mast type: simplex, construction height: 2,160 mm, battery capacity: 500 Ah, remaining battery capacity: 100 %, battery voltage: 48 V, fork carriage width: 920 mm, fork length: 1,200 mm, tire condition: 100 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), drive type: Elektro, Electric 3-wheel forklift Chassis number: 0 Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Refurbished without warranty Technical condition: Very good Front tyres type: Superelastic Front tyres size: Brand new Front tyres condition: New Rear tyres type: Superelastic Rear tyres size: Brand new Rear tyres condition: New Battery voltage: 48V Battery capacity: 500Ah Nedpoxu R R Hsfx Ahvocn Battery manufacturer: Brand new 2026 Battery type: PzS Battery year of manufacture: 2026 Battery condition: New Description: Good operational condition, as returned from the previous owner Side shifter, 3rd valve, rear working light, front working light, road legal equipment, safety light,

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. Nodpeu I N Npjfx Ahvecn 1) RIVI 24 carousel filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs - capacity: approx. 2000 bph Used machines, functional at the time of dismantling. Complete original technical documentation. Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. .

Condition: used, Water or liquid filling line for PET containers – capacity approx. 6000 bph (2.0 L) Currently, the machines are configured for 2.0 L PET bottle formats (other formats not included). It is possible to adjust to smaller or larger PET bottles by preparing the appropriate equipment. The line includes: Ncjdpjwny Hgefx Ahvjn - Nagema BF-60 filler with 12-head bottle capping unit - Plate conveyors for PET bottles - Nagema saturator, type KOMI 160 - Spomasz wrap-around paper labeller - Bottle packer with control cabinet for creating multipacks, e.g. 2x3 - Electric shrink oven + cooling fan for multipacks - Pallet wrapper The last photo shows the layout and dimensions of the machines. Technical condition: the machines were operational up to the end of production in 2018. Inspection and maintenance are recommended before resuming production. Optionally, a SIDEL SBO4 blower, which was last in operation on this line, can also be purchased.

Condition: used, Axial Fan condenser, water cooler. 1200mm x 6200mm x 1500mm 900kg. Also suitable for water cooling. Other sizes of vertical and horizontal condensers are also available (also suitable for water cooling, pictures can be found in the ad). Located in Vacegres, Hungary (EU). Nodpfoyldawsx Ahvjcn

Condition: excellent (used), Year of construction: 2008, operating hours: 530 h, HDP 253 Year 2008 1650/80 1350/96 Ncsdpfxoylb Urs Ahven