Used Vertical Carousel for sale (7,479)

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 12644, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Bids are binding and require timely collection between 26.01.2026 and 29.01.2026! Ksdpfx Ajxqfzrjffofa TECHNICAL DETAILS Travel distances Travel distance X-axis: 1,200 mm Travel distance Y-axis: 900 mm Travel distance Z-axis: 500 mm Spindle Minimum distance from working spindle to top edge of table: 180 mm Maximum distance from working spindle to top edge of table: 680 mm Milling spindle diameter at front bearing: 70 mm Spindle speed: 15,000 rpm Tool holder: HSK A63 Feed Feed rate X-axis: 1 – 3,000 mm/min Feed rate Y-axis: 1 – 3,000 mm/min Feed rate Z-axis: 1 – 3,000 mm/min Work table Table dimensions: 1,400 x 900 mm Number of T-slots: 14 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 31 A Connected load: 45 kVA Dimensions & weight Dimensions (L x W x H): 6,000 x 3,200 x 2,900 mm Weight: 12,000 kg EQUIPMENT 30-position tool changer Measuring probe Tool holders in the tool changer Note: Transport can be carried out on a truck up to 3,000 mm width.

Condition: used, Used Breddo model LORWW 100 US gallon (378 litre) capacity stainless steel vertical jacketed mixing vessel/Likwifier. Has approximately 1200mm diameter X 470mm deep tank with welded cone bottom and flat open top with hinged lids. Has approximately 250mm diameter bottom entry general purpose impeller belt driven by 30 hp 415 volt 3/50 1500 rpm motor with Allen-Bradley Powerflex 70 inverter drive. Also includes baffle bar. External jacket rated 125 psi (8.6 bar) working pressure at -20/+400 degf (-29/204 degc). Mounted on stainless steel mobile base with diaphragm pump local controls. Kedpfx Ajx Hwb Soffofa Specifications: Capacity: 100 gal Diameter: 3.94' Height: 1.54' Vertical/Horizontal: Vertical Type of stainless: Stainless Steel Legs/Lugs: Mounted on stainless steel mobile base

Condition: excellent (used), Year of construction: 1999, operating hours: 4,541 h, X-Axis: 1,350 mm Y-Axis: 900 mm Z-Axis: 750 mm Kfsdpfx Afox Htqisfea Spindle Overhang: 830 mm (Distance from spindle motor to Z-guide). Rapid Traverse (X, Y, Z): 30 m/min Spindle Speed: 12.000 rpm ISO40

Condition: excellent (used), functionality: fully functional, Automatic slab storage system (vertical slabs) n. 1 Jot for slab pack composition n. 1 robot for vertical picking/deposition/picking of packs composed by 130 cells of about 10 slabs each. Kfedpsxxlk Njfx Affoa N. 1 Jot for slab pack breakdown length about 50 meters.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, CNC Control: Professional 5 (FANUC) X travel (mm): 550 Y travel (mm): 1,000 Z travel (mm): 500 B axis (mm): 150 Kodpfxsxmgcpj Affofa C axis (degrees): 360,000 Number of pallets: - Table dimensions (mm): ø500 Table load capacity (kg): 350 Cutting feedrate X, Y, Z (mm/min): 32,000, 40,000, 40,000 Rapid traverse max. X, Y, Z (m/min): 48, 50, 50 Spindle speed (rpm): 14,000 Spindle power (kW): 18.5 / 15 Taper type: HSK63 Torque (Nm): Magazine type: Chain Magazine capacity (positions): 317 Max. tool diameter (mm): 90 Max. tool diameter with adjacent slots empty (mm): 140 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): - Through spindle coolant (bar): yes Equipment: Rotary table with digital measuring system Work light Through spindle coolant Electronic handwheel Dimensions: Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Condition: ready for operation (used), Year of construction: 2000, Immediately available from site: CNC Vertical Machining Center Mori Seiki Model MV 653/50 Year of manufacture: 2000 CNC control: Fanuc MSG 501 Table: 1700 x 660 mm Table load capacity: 2 t Travel (X/Y/Z): 1530 / 660/ 650 mm Distance spindle – table: 200 – 850 mm Distance spindle – column: 690 mm Kfjdpfxsx Iclro Affoa Taper: SK 50 Spindle speeds up to 6,000 rpm Main spindle drive: 26/22 kW Tool changer: 40 positions Through-spindle coolant (IKZ) Feeds: 1 – 10,000 mm/min Rapid traverse: 24 m/min Creep feed: 0 – 1,260 mm/min Total connected load: 52.5 kVA Chip conveyor Weight: 16 t Price: EUR 6,000.00 plus VAT, ex site

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC i Series, table width: 430 mm, table length: 920 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine Kjdpfxox Nbtdj Affofa

Condition: used, Used Stainless Services Ltd approximately 1,370 litre 316L stainless steel vertical storage tank. Unit measures approximately 1200mm diameter x 770mm straight side. Unit has welded dished top and welded cone bottom heads. Internal rated 2.5 bar design pressure at 150 deg.c. Unit mounted on (4) legs. Specifications: Kjdpfxjx Hwb Ee Affjfa Capacity: 361.9 gal Diameter: 3.94' Height: 2.53' Type Of Heads: welded dished top and welded cone bottom Vertical/Horizontal: vertical Type of stainless: 316L Legs/Lugs: 4

Condition: used, Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, controller manufacturer: Siemens, controller model: 840 D, table width: 2,400 mm, table length: 950 mm, table load: 2,200 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 1,500 rpm, overall weight: 22,000 kg, number of slots in tool magazine: 20, The machine is additionally equipped with a 6th axis, a 250 mm dividing head, and has 1,500 operating hours. An extensive tool package is available for purchase separately. Kfsdpjx Nbl Hsfx Affoa

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, Weeke machining center 2 electrospindles (top and bottom), 3 axes, 6 kW power Total number of drilling spindles (X+Y): 84 2 drilling units (Top and Bottom) Vertical drilling spindles: 32 Horizontal drilling spindles X: 8 Horizontal drilling spindles Y: 2 2 saw units (Top and Bottom) Max. saw blade diameter: 125 mm Maximum panel thickness: 80 mm Kfodpfx Afsx Napwsfea Automatic loading system Automatic unloading system With motorized transfer Control: Power Control Software: WoodWop

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: Mori Seiki MSX 501III (FANUC) X travel (mm): 800 Y travel (mm): 510 Z travel (mm): 460 Table size (mm): 1,320 x 600 Maximum table load (kg): 1,000 Kfedpexqxzrsfx Affoa Cutting feed (mm/min X,Y,Z): 1 – 20,000 Rapid traverse max. (m/min X, Y, Z): 30, 30, 24 Spindle speed (rpm): 20,000 Spindle power (kW): 18.50 Taper type: BT-40 Torque (Nm): - Magazine type: RANDOM Magazine positions: 30 Max. tool diameter (mm): 76 Max. tool diameter with adjacent pockets empty (mm): 127 Max. tool length (mm): 250 Max. tool weight (kg): 7 Coolant tank capacity (l): 200 Through-spindle coolant (bar): Yes INCLUDED EQUIPMENT: Chip conveyor Through-spindle coolant with high-pressure pump Tool breakage detection probe 4th axis NIKKEN Workpiece probing system Tool measurement probe MACHINE DIMENSIONS Length (mm): 4,308 Width (mm): 4,068 Height (mm): 2,940 Weight (kg): 7,200

Condition: ready for operation (used), Year of construction: 2012, Available immediately from Swiss toolmaking facility (CH): Vertical 5-Axis Simultaneous Machining Center Unitech Model: HSM – IC 5-Axis Year of manufacture: 2012 Heidenhain iTNC 530 Table size: 1100 x 600 mm Travel (X/Y/Z): 1080/610/810 mm Rotary table diameter: 600 mm Spindle speeds up to 15,000 rpm Feed rates up to 30,000 mm/min Table load capacity: 500 kg Tool holder: BT 40 Magazine: 40 stations Through-spindle coolant (IKZ) 60 bar Chip conveyor Compressed air through the spindle Spindle hours: 8,200 / spindle will undergo a complete overhaul in 2025, after which it will be reset to 0 hours Kodpfx Asx Iclxjffjfa Glass scales on X and Y axis Zero-point measuring system in rotary table Infrared measuring system Zero-point clamping system integrated in rotary table with 10 clamping pots, manufacturer: Schunk Weight: 10 tons Price: EUR 17,500.— plus VAT, ex location

Year of construction: 2016, condition: ready for operation (used), General Data Machine weight 9500 kg This Engel Insert 90 was manufactured in 2016. A vertical injection moulding machine with a total run time of only 54 hours and a weight of 9,500 KG. Consider the opportunity to buy this Engel Insert 90 vertical injection moulding machine. Contact us for more information. Ksdpfex D Hp Rjx Affjfa Application Types Injection Moulding

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Capacity: 4,000 L Diameter: 1,800 mm Straight Side: 2,450 mm Material of construction: Stainless Steel Type Of Heads: Welded Dished Top and Bottom Internal Pressure: 6 bar Jacket Pressure: 9 bar Kjdpfx Aox Hwbxsffofa Internal Temperature: 130°C Type of stainless: Stainless Steel Legs/Lugs: 4 Lugs

Condition: good (used), Year of construction: 2010, Machining Centre Sugino Xion-II-5AX-CE Manufacturer: Sugino Machine Limited Japan Kodpfox Hqwgjx Affefa Model: Xion II 5AX CE Year of manufacture: 2010 Number of axes: 5 Travel distance X axis: 300 mm Travel distance Y axis: 300 mm Travel distance Z axis: 200 mm A axis swiveling range: -90° to +90° C axis rotation: 360° Maximum tool diameter: 40 mm Maximum tool weight: 15 kg Spindle speed: 40,000 rpm Tool holder: HSK-E32 Positioning accuracy X, Y, and Z axes: 0.002 mm Repeatability X, Y, and Z axes: ±0.001 mm Machine weight: 2,800 kg No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, machine/vehicle number: IC1261, Year of construction: 2017, operating hours: 4,842 h, load capacity: 235 kg, lifting height: 3,000 mm, construction height: 1,540 mm, overall weight: 640 kg, enginetype: Electric, manufacturer: Jungheinrich Ksdpfsx I Th Rsx Affsfa

Condition: used, Year of construction: 2015, operating hours: 7,206 h, 2 x CNC Machining Centers + Accessories as a Package, Used 1. KONDIA A-6 Manufacturer: KONDIA Model: A-6 Year of manufacture: 2015 Control system: Heidenhain TNC 530 Kfodpsx I S Icofx Affoa Operating hours: Spindle hours: 7,206 h Total power-on hours: 28,791 h Working area: X-axis: 600 mm Y-axis: 400 mm Z-axis: 510 mm Equipment: - 20-position tool changer - Through-spindle coolant (15 bar) - Electronic handwheel - Chip conveyor, left-sided 2. KONDIA A-10 Manufacturer: KONDIA Model: A-10 Year of manufacture: 2010 Control system: Heidenhain TNC 530 Operating hours: Spindle hours: 11,095 h Total power-on hours: 49,429 h Working area: X-axis: 1,000 mm Y-axis: 500 mm Z-axis: 610 mm Equipment: - 40-position tool changer - Through-spindle coolant (15 bar) - Electronic handwheel - Chip conveyor, left-sided 3. Accessories - 2 x 3D workpiece touch probes - 1 x Tool measuring probe - 6 x GRESSEL machine vices - Approximately 150 SK 40 tool holders with tools The machines were used for the in-house production of a manufacturer specializing in automation technology. Extensive aluminum machining was carried out.

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex location: Vertical Machining Center Sigma Type Zenit 3 Year of manufacture 2001 Heidenhain TNC 426 – M Table 1200 x 500 mm Travel X/Y/Z 1000/500/550 mm SK 40 Tool magazine for 50 tools Spindle speeds up to 12,000 rpm Through-spindle coolant Weight 6.5 tonnes Priced at EUR 7,000,-- plus VAT ex location. Kfedpfx Aex Icl Eeffoa

Condition: used, Year of construction: 2006, controller manufacturer: Siemens, controller model: 840D, Machine number D10 282 Control Siemens 840D Year of Manufacture 2006 Taper ISO 50 P.D.B. Cross Travel (mm) 2300 Vertical Travel (mm) 1000 Longitudinal Travel (mm) 3300 Table (mm) 3500 x 1250 Kfjdpfex I Sqwox Affoa Max. Load 9000 kg kW 70 Volts 400V Cycles 50 Automatic Tool Changer 60 tools Rotating B - C axis head: B-axis +/- 95 degrees C-axis +/-190 degrees Rapid traverse X-axis 25 m/min Rapid traverse Y-axis 40 m/min

Condition: used, Used Netzsch approximately 1,000 litre stainless steel vertical jacketed mixing vessel. Unit has welded flat top and bottom heads. External jacket rated 3 bar working pressure. Unit has top entry stainless steel anchor type agitator with drive and stainless steel high shear agitator with drive. Unit is mounted on (4) legs with forklift attachment. Kfsdpfx Aex Hv Scoffsa Specifications: Capacity: 264.2 gal Type Of Heads: Flat top and bottom heads Vertical/Horizontal: Vertical Legs/Lugs: 4 legs with forklift attachment

Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Year of manufacture: 2013 Axes: 5 Travel X axis: 300 mm Travel Y axis: 300 + 100 mm Travel Z axis: 330 mm Swivel range A axis: -90° – +90° Rotary axis C: 360° Table load capacity: 200 kg Maximum tool diameter: 40 mm Maximum tool weight: 3 kg Maximum total tool mass: 33 kg Number of tools: 21 Spindle speed: 24,000 rpm Kfjdpfx Afox Hqwaefea No liability is assumed for the accuracy, completeness or timeliness of the information provided.

Condition: used, Year of construction: 2015, turning diameter 300 mm swing diameter 300 mm turning height 300 mm Ksdpfsx Hpzqex Affefa Control Eckelmann x-travel 300 mm z-travel 300 mm y-travel 300 mm spindle turning speed - stepless 5000-80000 U/min main drive 1,2 kW hollow 670 x 510 mm total power requirement 8 KVA weight of the machine ca. 14 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Vertical polishing machine. Control: Eckelmann

Condition: used, Year of construction: 2017, operating hours: 4,898 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC machining center, used Brand: AWEA Model: BM-1600 Year of manufacture: 2017 Control system: Heidenhain iTNC 530 HSCI Operating hours Spindle hours: 4,898 h Kedpfxsx I S E Ij Affefa Total power-on hours: 18,739 h Working area: X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 800 mm Spindle: Speed: 10,000 rpm Power: 22/35 kW Taper: BT 50 Table: 1,700 x 800 mm Max. load: 2,000 kg Equipment: - 40-position tool changer - Through-spindle coolant 20 bar - Electronic handwheel - Left-side chip conveyor - Direct measuring system The machine was used in-house for the production of automation technology components. A significant amount of aluminum was machined.

Condition: used, Used Pfaudler model CE10000 vertical glass lined reactor. Approximately 10,000 litre capacity. Internal rated 6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 7.5 bar/full vacuum design pressure at -29 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with Pfaudler VSO gearbox and drive. Unit has mild steel mounting ring. Specifications: Capacity: 2,641.7 gal Material of construction: Glass lined, External mild steel jacket Kfodpfx Aex Hv R Ejffoa Internal pressure: 87 PSI Jacket pressure: 108.778

Condition: good (used), Year of construction: 2012, Hasegawa PM150 Machining Center Manufacturer: Hasegawa Model: PM 150 Year of manufacture: 2012 Number of axes: 4 Travel X axis: 150 mm Travel Y axis: 225 mm Travel Z axis: 200 mm Swivel axis: YES Rapid traverse X, Y, Z: 30 m/min Table load capacity: 80 kg Table working surface: 300 × 260 mm T-slot table: 12H7 × 5 Spindle taper: HSK E32 Spindle speed: 100 to 30000 rpm Tool magazine: 10 tools Max. tool size: Ø50 mm Memory capacity: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Kjdpfex Hqv Njx Affofa No guarantee is given for the accuracy, completeness, or timeliness of the information provided.