Used Vdf Heidenreich U Harbeck for sale (40,030)

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Dksdpfxezc D Dko Aiijw Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 5932 € Djdoyui Sqjpfx Aiiekw 114.49 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2")and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 34,062 h, spindle speed (max.): 10,000 rpm, overall weight: 15,500 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, workpiece height (max.): 1,330 mm, spindle motor power: 28,000 W, number of slots in tool magazine: 120, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG DMC80U DuoBlock was manufactured in 2011. It features a maximum workpiece diameter of 800 mm and a height of 600 mm, with a load capacity of 800 kg per pallet. The machine is equipped with a dual pallet system and a rapid traverse rate of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DMC80U DuoBlock universal machining centre we have for sale. Contact us for further details. • Control: Heidenhain iTNC 530 3D path control • B-axis Travel: 180° (Universal milling head with controlled B-axis) • Spindle Type: Integrated motor spindle without gearbox • Spindle speed ranges: • Operating mode 1: 0–10,000 rpm • Operating mode 2: 0–800 rpm • Operating mode 3: 0–5,000 rpm • Spindle performance: • Spindle Power (40% Duty Cycle): 28 kW • Spindle Power (100% Duty Cycle): 19 kW • Spindle hours: 34,062 h • Machine on hours: 79,252 h • Spindle: New spindle installed end of 2025 • Table Type: NC rotary table with pallet carrier • Pallets Included: 2 pallets • Pallet Clamping Surface: 800 mm x 630 mm • Pallet T-slots: 14 mm per DIN 55201-A2 • Pallet Weight: 300 kg per pallet • Maximum Permissible Workpiece Weight on Pallet: 1,400 kg • Maximum Workpiece Height: 1,330 mm • Maximum Workpiece Diameter: 900 mm • Feed Rate (X/Y/Z): 0 - 60,000 mm/min • Axis Acceleration (X/Y/Z): 7 / 6.5 / 6.5 m/s² • Maximum Feed Force (X/Y): 13 kN • Maximum Feed Force (Z): 9 kN • Linear Scale Resolution (X/Y/Z): 0.001 mm • Table Max Torque (40% duty cycle): 5,000 Nm • Table Holding Torque (40% / 100% duty cycle): 5,000 Nm / 3,660 Nm • Table Maximum Rotation: 35 rpm • Pallet Changer Type: Rotary pallet changer • Measuring Probe: Heidenhain TS 649 DMG Infrared probe • Kinematics Verification: 3D quickSET toolkit • Chip Management: Chip conveyor • Mist Extraction System: Oil and emulsion mist extraction system with mechanical filter (1,600 m³/h flow rate) • Cooling Capacity (Machine / Cabinet): 3.3 kW / 1.0 kW • Electrical Connection Data: 86 kVA, 400 V, 50 Hz, Max Nominal Current 124 A • Workpiece dimensions (max): Diameter 800 mm, height 600 mm • Feed force (X/Y/Z): 10 kN • Rapid traverse: 60 m/min • Tool Holder Taper: SK 50 per DIN 69871 Form AD / Form B • Tool Clamping Pull Stud: DIN 69872 Form A / Form B or ISO 7388/2 Typ B • Tool Clamping Mechanism: Mechanical via spring force, hydraulic release • Tool Magazine Capacity: 120 slots (vertical chain magazine) • Delivery: January 2027 Additional equipment • Dual pallet changer system • Internal coolant supply (ICS) with 980 l tank and band filter (40 bar through spindle center) • Clamping hydraulics • Infrared measuring probe Technical Specification Taper Size SK 50 Dkedpjy Egblefx Aiijw Through-spindle Coolant Yes

Condition: used, x-travel 1550 mm y-travel 400 mm z-travel 500 mm table-size 1850 x 350 mm spindle taper ISO Sk 50 Dedpjy Umbqofx Aiiskw spindle turning speed range 40 - 1800 U/min total power requirement 7,5 KW weight of the machine ca. 2,8 t dimensions 2,4 x 2,2 x 2,1 m Universal Milling Machine - 3-axis digital readout - Central lubrication system - Coolant system - Machine lamp - Machine leveling feet - Chip guard - Emergency stop device - Mobile workbench incl. tools

Condition: good (used), total width: 800 mm, total height: 1,500 mm, total length: 1,400 mm, steady rest CNC Lathe VDF Wohlenberg - U1270 MACH-ID 9187 Make: VDF Wohlenberg Type: U1270 Length:1400mm Width:800mm Height:1500mm Dedpfx Ajzcn Sroiiskw Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1998, spindle motor power: 28,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, total height: 2,700 mm, total width: 4,500 mm, overall weight: 11,700 kg, product length (max.): 4,500 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 60 U was manufactured in 1998. It features impressive X, Y, and Z-axis travels of 600 mm, 700 mm, and 600 mm respectively, along with a maximum spindle speed of 12,000 rpm. The machine includes a robust table size of 630 x 500 mm and a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 60 U mill-turn centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): up to 30 m/min • Table: NC rotary-tilting; size 630 × 500 mm; • Spindle: up to 28 kW; • Number of tools: 120 (o "Tool capacity: 120") • High-pressure coolant: 40 bar • Coolant tank: 1,000 liters • Tool magazine/ATC: automatic tool changer • Machining capabilities: simultaneous 3-axis milling; contouring; drilling; tapping; boring; complex surface machining; aerospace and automotive component manufacturing • Construction/design: high-rigidity universal machining centre; integrated rotary-tilting table; full 3-axis interpolation; precision linear guideways • Dimensions (approx.): length 4,500 mm; width 2,500–4,500 mm; height 2,500–2,700 mm • Typical applications: aerospace components; medical parts; tool & die manufacturing; automotive components; precision mechanical engineering Additional equipment • Internal coolant system • Chip conveyor • Touch probe Dkjdpfx Aozcp Alsiisw • Tool setter • Tool measurement system (Blum / Renishaw, depending on machine) • Electronic handwheel • Automatic pallet changer (RS4 versions)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,295 h, spindle speed (max.): 7,000 rpm, travel distance X-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 415, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 1999. It features a Heidenhain TNC 415 control system, ensuring precision and reliability in operation. The machine is in very good condition and fully operational. If you are looking to get high-quality milling capabilities, consider the HERMLE U 630 T universal milling machine we have for sale. Contact us for further details. Dksdpfx Aszbu I Dsiijw • Machine Type: Universal Milling Machine • Condition: Very good / Fully operational • Control System: Heidenhain TNC 415

Condition: used, Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Dedpfx Aioz I Dhceiekw Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

Condition: used, machine/vehicle number: 2502, DESCRIPTION Parting head, manufacturer Walter Type HT 200 U Center height 200 mm Mounting taper SK 50 Dodec Tuyrjpfx Aiijkw Spindle diameter 130 mm Weight 260 kg Space requirement: W 500 x D 650 x H 450 mm DMT0Z2OCZN9

Condition: good (used), Grinding wheel Diameter 500 mm Inner diameter 105 mm Height 75 mm Cylindrical bore 105 mm Pitch 5 mm 475 rpm. Dksdpfxec U E Rzs Aiisw

Condition: used, self-centering drag gear (5146) Manufacturer: WMW Max. 2800 RPM. Dodpfxodb Uzxs Aiiskw

Condition: used, Ferwood Code: RU0001121 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Dodpfx Aiou U D N Ujiskw

Condition: used, Year of construction: 1990, cutting diameter 280 mm band length 450 mm capacity 90 degrees: square 240 x 240 mm capacity 90 degrees: flat 280 x 160 mm capacity 45 degrees: round 180 mm dimensions of saw-blade 450 x 40 x 2.0 mm engine output 2.6 kW height of material-table 500 mm weight of the machine ca. 495 kg Dkjdpsxab Hcsfx Aiiew range L-W-H 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device

Condition: used, mileage: 274,760 km, power: 294 kW (399.73 HP), first registration: 10/2008, fuel type: diesel, empty load weight: 7,450 kg, maximum load weight: 10,550 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,500 mm, next inspection (TÜV): 08/2026, brakes: intarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, navigation system, onboard computer, parking heater, power assisted steering, seat heater, spoiler, traction control, Vehicle location: Bovenden, storage area. Includes: 1 comfort seat, 1 bunk, heated seats, electric mirrors, heated mirrors, electric window (left), electric window (right), air conditioning, sun visor, cruise control, navigation system, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), intarder, automatic transmission, roof spoiler, side spoiler, lifting/lowering mechanism, differential lock, fog lights, air suspension, aluminum fuel tank, aluminum wheels, low-noise G1, sunroof, green environmental badge. Wheelbase: 3500 mm. Body: Sold only as a complete unit with trailer -89271! Formerly owned by the occupational safety and health association for the electrical industry! Dodpjzid Ihsfx Aiiokw Transmission: 12 AS 2131 DD with intarder, air conditioning, auxiliary heater, 1 bunk! ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: used, mileage: 232,693 km, power: 213 kW (289.60 HP), first registration: 08/2010, fuel type: diesel, empty load weight: 6,230 kg, overall weight: 15,000 kg, axle configuration: 4x2, next inspection (TÜV): 01/2027, fuel: diesel, color: beige, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: other, Equipment: ABS, air conditioning, differential lock, soot filter, MAN TGM 15.290 BL 4x2 flatbed truck with tarpaulin, immediately available, vehicle on site, only 1 previous owner. - Valid MOT until 01/2027 - Cab currently in beige, repainting to your desired RAL color possible at a favorable fixed price for the TGM. - Manual transmission - Multifunction steering wheel - Heated seats - Automatic climate control - Differential lock - 232,693 km - Flatbed with tarpaulin sides Dkedpfjzgk Aysx Aiisw - Subject to errors and prior sale! - More information, additional XXL photos, directions, can be found on our website at: - For inquiries in English, please call ... Climate control, Climatronic, front seat heating, VAT can be shown, ABS, service booklet, mechanical sunroof, limited-slip differential, interior filter, foldable mirrors, cab: near-sales location, electric windows, seat heating, from first owner, emission class: Euro 5, diesel, rear-wheel drive, particulate filter, emission sticker: 4 - Green.

Condition: used, mileage: 812,595 km, power: 235 kW (319.51 HP), first registration: 07/2011, fuel type: diesel, number of seats: 42, gearing type: automatic, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), Our internal vehicle number: 1205 MAN A20 Lion's City Ü NÜ 323 Power: 235 kW Emission class: Euro 5/EEV Type: City bus Vehicle class: M3 First registration: 07/2011 Mileage: Original. * ZF automatic transmission 6AP2000B - 1/2/3/D/N/R * 42+1 seats * 41 standing places * LAWO destination display front/side/rear * Intercity seating * Trash can at exit door 2 * Air conditioning * Electric sunblind * Mechanical folding ramp * Multi-purpose area - right side * Convector heater Djdpfxez Am Eis Aiiekw * Blower fan * Safe / storage cabinet at door 1 / entrance area * Window heating * Single-line LWO display inside, to display the next stop * Grab handles * Storage box above the driver's area * Registered maximum speed according to vehicle registration document: 85 km/h Note: Vehicle is registered – mileage and condition may vary. The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information is without guarantee. We reserve the right to sell the vehicle in the meantime. We refer to our general terms and conditions.

Condition: used, Year of construction: 1977, functionality: unexamined, pressing force: 75 t, Eccentric press EBU SK75 U Year of manufacture: 1977 Location: Bad Tölz Dodpfx Aiozv Skdsiekw Inspection is welcome. We have other used machines available. Please feel free to contact us.

Condition: excellent (used), Great deal, in excellent condition, 2550/1300, from a Swiss liquidation sale. 6-cylinder engine, electric heating plates, 98-ton capacity, safety cable. Dsdpfx Aezw Udcjiiskw

Condition: excellent (used), 466 USED W&P Parta U bread divider. Dodpfszxnvnjx Aiiekw EXTERNAL DIMENSIONS (in cm): - W: 195 - L: 120 - H: 183 TECHNICAL DATA: - power supply: 400V 50Hz The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: good (used), Year of construction: 2004, operating hours: 35,251 h, functionality: fully functional, overall weight: 8,500 kg, spindle speed (min.): 12,000 rpm, operating hours of spindle: 11,082 h, number of slots in tool magazine: 28, Equipment: chip conveyor, documentation/manual, This HERMLE U1130 universal machining center was manufactured in Germany in 2004 and has been in operation for 35,577 hours, of which only 8,087 are spindle hours. Equipped with a Heidenhain TNC 520 control, this machine features the integration of 5 axes and an NC rotary table. It offers excellent operating conditions. Additional information: Machine advantages: Qualitative machine advantages: Very good condition Spindle operating hours: 11,082 Technical machine advantages: Dedpfxoz Inkne Aiijkw Internal cooling at 40 bar Integrated NC rotary table Blum laser measurement system Without the vises shown in the pictures.

Condition: good (used), Machine spindle, precision spindle, double bench grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: DKF, Grinding spindle Precision spindle -Type: 6.251/23 -Speed: max 12500 rpm -Cylinder: Ø 80 x 250 mm -Recession: Cone on both sides, see photos Dsdpjv Syp Djfx Aiiskw -Number: 4x spindles available -Price: per piece -Overall dimensions: Ø 80 x 350 mm -Weight: 8.8 kg/pc.

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 93.0 kg. The AL1-2U electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continually work on new parts without having to switch the machine on again each time. Dedpfexaadmjx Aiiekw With the electrically driven AL1-2U pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). This pipe notcher is also suitable for notching a zinc outlet in round and rectangular metal pipes. You can notch pipe outer diameters of ø 20.0 -60.3. Do you often notch pipes? Then the electrically driven pipe notcher AL1-2U with the 2.2 kW electric motor is just the thing for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electro-motor pipe notching machine - including notching station for zinc run-out notches - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: new, Year of construction: 2026, The CORMAK electric scissor lift table with a lifting capacity of 1000 kg is a stationary U-shaped lifting platform designed for convenient handling of pallets, containers, crates, and warehouse loads. The U-shaped design allows a standard pallet truck to enter directly into the table area, making loading, unloading, and positioning goods at the required working height much easier. This model is ideal for warehouses, logistics centers, production facilities, picking areas, and shipping zones where fast pallet handling is important without the need for additional ramps or recessed floor installations. The low minimum height of 85 mm allows easy access with a pallet truck, convenient load positioning, and lifting the goods to the operator’s working level. The 1450 × 1140 mm platform provides sufficient space for handling standard pallets and loads with a larger base. A lifting capacity of 1000 kg, 400 V power supply, and a 1.5 kW lifting motor make the table well suited for everyday warehouse, production, and logistics operations. U-shaped design – easy loading with a pallet truck The main advantage of this model is the U-shaped construction of the scissor lift table. The open section allows a pallet truck to be inserted under the pallet and the load to be positioned directly on the platform. This enables the operator to prepare goods more quickly for lifting, order picking, packing, or inspection. This solution is particularly practical when handling EUR pallets, transport containers, bulk goods, and loads prepared for shipment. The pallet lift table makes work easier in situations where a conventional rectangular platform would require additional equipment or more time-consuming reloading. Low 85 mm profile for convenient pallet handling The minimum height of 85 mm is an important feature when working with pallets and pallet trucks. The low-profile design makes it easier to position the load directly on the platform and reduces the need for manual handling of goods. Main advantages of the CORMAK U-shaped scissor lift table 1000 kg lifting capacity – suitable for handling pallets, containers, crates, and warehouse goods. U-shaped design – convenient loading and unloading using a pallet truck. Low minimum height of 85 mm – easy pallet positioning without the need for ramps. Maximum height of 860 mm – ergonomic working height for packing, order picking, and goods inspection. 1450 × 1140 mm platform – sufficient space for standard pallets and larger loads. 1.5 kW lifting motor – efficient load lifting in everyday operation. 400 V power supply – suitable for industrial and warehouse applications. Remote control operation – convenient lifting and lowering of the platform at the touch of a button. Safety limit switches – control of the maximum working height. Safety bar – protection of the area underneath the platform during lowering. Net weight of 240 kg – ensures stability during operation under load. Technical Specifications PARAMETER VALUE MAXIMUM LIFTING CAPACITY 1000 kg MIN. HEIGHT 85 mm MAX. HEIGHT 860 mm TABLE LENGTH 1450 mm Dsdpfjw Rl Imsx Aiiskw TABLE WIDTH 1140 mm LIFTING MOTOR POWER 1.5 kW WEIGHT 240 kg POWER SUPPLY 400 V UDT INSPECTION REQUIRED YES

Condition: used, maximum load weight: 660 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 1,125 mm, total width: 1,510 mm, total height: 1,125 mm, A64 GWN01572722 Low-loader trailer Unsinn, type WEB T 2111-7-13, tarpaulin and frame, internal height 125 cm, gross vehicle weight 750 kg, 100 km/h, Dkodpfx Aijyqdmzjiow Vehicle not prepared Errors and prior sale excepted.

Condition: used, mileage: 703,762 km, power: 235 kW (319.51 HP), first registration: 11/2013, fuel type: diesel, number of seats: 43, gearing type: automatic, next inspection (TÜV): 06/2027, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Clean vehicle from our own fleet * Well-maintained interior * Very good condition * Ready for immediate use! * No pending repairs! * Air conditioning for driver and passenger compartment * Registered Corona hygiene protection screen * 43 seats * 43 standing places * Euro 6 engine * Engine code: EURO VI, B, M, N * New TÜV/emission test upon request Dedpfxszu Uwds Aiijkw * All information without guarantee * Subject to prior sale