Used Vacuum Tubes for sale (5,467)

Condition: new, Type: ST-700 Sealing length: 4 * 620 mm Vacuum pump: 40 m3/h Machine cycle: 20 - 40 sec. Voltage: 380 V, 50 Hz Electric power: 3.3 kW Machine dimension in cm: Width: 145 Kdodpfxeh Dp Nre Ah Nog Lenght: 65 Height: 98 Delivery time: after advanced payment, 1 working day

Condition: used, Two-chamber vacuum machine Ital Form Dimensions of the machine: 1845×868×1020mm Chamber dimensions: 880x755x170mm Kodstv E S Uepfx Ah Njdg Sealing length: 820mm Number of heaters: 2 Electric power: 3kW Weight: 295kg

Condition: new, Setting total time Kjdeul T Uijpfx Ah Nodg Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW

Condition: new, Vacuum machine, single chamber Efficient vacuum machine of exceptional quality for vacuum packaging of meat, cured meat products, fruits and vegetables Ideal for fast food facilities, hotels, restaurants and other catering facilities Dimensions: 540 × 490 × 540mm Kdjdeuu H Eyepfx Ah Neg Heaters: 2 x 40 cm Electrical power: 1.5kW Weight: 59 kg

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2700 liters Machine dimensions in cm: Length: 190 Width: 375 Height: 210 Electric power: 14 kW Kodpfx Ahsul Ua Ts Nedg

Condition: new, Setting total time Frequency speed control Kjdpfx Ahsul T Rqo Nsdg Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 350 Width: 230 Height: 260 Electric power: 12 kW

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 210 Kodpfx Ahjul T Txj Nodg Width: 375 Height: 255 Electric power: 14 kW

Condition: like new (used), Vacuum machine Manufacturer: Ramon Capacity: 20 m³/h Kedpfx Ahexr Iu Re Nedg Voltage: 220V / 50Hz Power: 0.75kW

Condition: like new (used), VF 200 vacuum filler Kodpfxoxulh Ho Ah Nsdg All in one 240 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Filling pressure: up to 35 bar Portioning speed: up to 380 portions per minute Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.5 KW

Condition: like new (used), Vacuum machine Manufacturer: Röschermatic Kjdpfsxru H Hsx Ah Nsdg Double-chamber vacuum packer Dimensions: 470x450x180mm Seal bar lenght: 450mm Pump capacity: 63 m³/h Voltage: 380V / 50Hz

Condition: good (used), mileage: 153,950 km, power: 353 kW (479.95 HP), first registration: 06/2013, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 300 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro6, suspension: air, loading space volume: 16 m³, Year of construction: 2013, Equipment: AdBlue, EBS, air conditioning, cruise control, electric window regulation, fog lights, navigation system, parking heater, - Aluminium fuel tank - Brake booster - High beam headlights - Speed limiter - Air conditioning - Leather interior - Leather upholstery - Air horn - Rotating beacon - Reversing camera - Sun visor - Stability control - Auxiliary heater - Toolbox - Xenon lighting - Power take-off (PTO) Scania G480, 8x4, Euro 6, combination sludge/water vehicle with recycling unit, stainless steel tank, year of manufacture 2013 Further information: Engine: 480 HP Transmission: Opticruise (with clutch pedal) Suspension: air-air Mileage: 153,950 km Wheelbase: 3900 mm Emission standard: Euro 6 First registration: 13.06.2013 Electric windows and mirrors Air conditioning Reverse camera Navigation system Webasto (cab heater), engine pre-heater, etc. Last technical inspection at 150,600 km (07.02.2025) Last maintenance at 149,500 km The truck is in good and fully functional condition. Body: Wiedemann & Reichhardt, Super 2000 Remote control, sludge suction (stainless steel sludge tank 10,000 l), Wiedemann KW3000, speed: 1000, m3/h: 3000, vacuum: 400 bar (new vacuum pump, year 2020) High-pressure flushing system with stainless steel water tank 6,000 l, URACA, Webasto Thermo 300... operating hours: 2,128 hours Kdjdpfjx Tpcnex Ah Neg Recycler with 4 cyclones Overall assessment: General condition assessment (1-5): 4.5 Condition of front tires: 90% (or new tires at extra cost) Condition of rear tires: 90% (or new tires at extra cost) Additionally: All documents required for registration in all EU countries available (all from Wiedemann & Reichhardt and Scania). Price: € Stockholm, Sweden For further information and photos, please contact us by phone or email. We are also available via WhatsApp and Viber. • We speak English * Vi talar svenska * Mówimy po polsku * Hablamos español * • We speak Ukrainian * We speak Russian * Vorbim în limba română * We speak German * .----- * Shipping costs for this truck to various destinations * -----. * Stockholm (Sweden) – Gdansk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixões (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 .----- * These prices apply only to the purchase of this truck. * -----.

Condition: good (used), Year of construction: 2006, Rotary vane vacuum pump Suction capacity 100 m2/h Kdedpjgradqofx Ah Nsg Plus Rotary vane vacuum pump RS RA 0160 D5 ZIVRXZ Suction capacity 160m2/h 2x Piece available

Condition: new, Year of construction: 2025, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function Kdodpfx Asg Dgbheh Nog The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: good (used), mileage: 151,400 km, power: 324 kW (440.52 HP), first registration: 07/2013, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, loading space volume: 11 m³, Year of construction: 2013, Equipment: AdBlue, - PTO (Power Take-Off) Scania G440, 6x2*4, Euro 6, combination sludge/high-pressure truck with recycling unit, stainless steel tank, year of manufacture 2013 More information: Engine: 440 HP Transmission: Opticruise (with clutch pedal) Suspension: air-air Mileage: 151,400 km Wheelbase: 4,300 mm Emission standard: Euro 6 First registration: 18/07/2013 Electric windows and mirrors Air conditioning Reverse camera Navigation system Webasto (cab heater), engine pre-heater… Last technical inspection at 24,000 km (19/03/2025) Last service at 24,900 km The truck is in good and fully operational condition. Body: Wiedemann & Reichhardt, Super 2000 Remote control, sludge extraction (6,000 liters of sludge), Wiedemann KW3000, Speed: 1,000, m³/h: 3,000, Vacuum: 400 bar (new vacuum pump 2020) High-pressure flushing unit with stainless steel water tank (4,500 liters), URACA, Webasto Thermo 300... Operating hours: 2,467 hours Recycler with 4 cyclones Overall assessment: Overall rating (1–5): 4.5 Condition of front tires: 60% Condition of rear tires: 80% Additional info: All documents for registration in all EU countries available (all from Wiedemann & Reichhardt and Scania). Price: € Stockholm, Sweden For further information and photos, please contact us by phone or email. We are also available via WhatsApp and Viber. • We speak English * We speak Swedish * We speak Polish * We speak Spanish * • We speak Ukrainian * We speak Russian * We speak German * ----- * Shipping costs for this truck to various destinations * ----- * Stockholm (Sweden) – Gdansk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixões (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 ----- * These prices apply only for the purchase of this truck * ----- _____ _____ Kdsdpfx Ahex Tntle Nog General information Applications: cleaning, land drainage, drainage and recycling Technical information Engine displacement: 12,740 cc Axle configuration Brakes: disc brakes Front axle: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steering; Tire profile left: 60%; Tire profile right: 60%; Suspension: leaf spring Rear axle 1: Tire size: 315/80R22.5; ...

Condition: good (used), mileage: 225,500 km, power: 286 kW (388.85 HP), first registration: 01/2008, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel-air, loading space volume: 16 m³, Year of construction: 2008, Equipment: AdBlue, crane, = Additional Options and Accessories = - PTO (Power Take-Off) Kdodpfxex Tnrze Ah Njg = Remarks = Volvo FM380, 6x2*4, 16 m³ sludge and high-pressure truck with crane, first registration: 2008 Further information: Engine: 380 HP Transmission: I-Shift Suspension: leaf spring Mileage: 225,500 km Wheelbase: 4,300 mm Emissions standard: Euro 5 First registration: 23.01.2008 Year of manufacture: 2007 Electric windows and mirrors Air conditioning Reversing camera Webasto cab heater and pump compartment heating, engine pre-heating No warning messages! Last service at 222,500 km (08.10.2025) Last technical inspection at 218,700 km (02.04.2025) Tachograph recently inspected: 08.10.2025 The truck is in good and fully operational condition, with no active faults/warnings present. Superstructure: Korp&Son 16 m³ with 2 remote controls, sludge suction and high-pressure flushing unit with stainless steel floor and tipping device. Compartment (1): 8 m³ for high-pressure flushing water. Compartment (2): 8 m³ for sludge. Water pump: URACA with 1-inch high-pressure hose and ½-inch high-pressure hose. Vacuum pump: Moro model PM200, 930 m³/h, pressure 0.9 bar, vacuum -0.9 bar; all in flawless and fully operational condition! All components serviced in October 2025. Front tyre tread depth: 70% Rear tyre tread depth: 70% Price: €, Stockholm, Sweden = Further Information = Front axle: Tyre size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Left tyre tread: 70%; Right tyre tread: 70%; Suspension: leaf spring Rear axle 1: Tyre size: 315/80R22.5; Double tyres; Max. axle load: 11,500 kg; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70%; Suspension: air suspension Rear axle 2: Tyre size: 385/65R22.5; Lift axle; Max. axle load: 7,500 kg; Steered; Left tread: 70%; Right tread: 70%; Suspension: air suspension Crane: Year of manufacture 2007 APK (General Technical Inspection): valid until 03.2026 Technical condition: good Visual condition: good

Condition: used, mileage: 101,825 km, power: 95 kW (129.16 HP), first registration: 02/2011, fuel type: diesel, empty load weight: 2,355 kg, maximum load weight: 1,145 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,700 mm, next inspection (TÜV): 11/2027, color: silver, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 2, total length: 5,910 mm, Equipment: ABS, air conditioning, low noise, parking heater, traction control, Camera system IBAK Modular BS7 No. 1803, including software and extensive accessories, the vehicle is in very good condition. Non-binding offer – subject to change and prior sale – sale takes place with exclusion of any warranty – all information without guarantee! Kedpfx Ahsyaqx Ao Nodg

Condition: used, mileage: 157,336 km, power: 132 kW (179.47 HP), first registration: 06/2005, fuel type: diesel, empty load weight: 6,400 kg, maximum load weight: 1,090 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 03/2026, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, number of seats: 2, total length: 6,950 mm, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, Kramer box body, Sklarz testing device type EMSE-Mastertest DPK1000-LVW with radio system, year 2018, generator with Kubota diesel engine, compressor unit, extensive accessories such as sealing bladders, tripods, and tools. Non-binding offer – subject to change and prior sale. Sale takes place without any warranty. All information without guarantee! Kdjdpsyaqxiofx Ah Neg

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 Ksdpfsx E Rdwox Ah Nodg The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Year of construction: 2018, condition: good (used), 1 post extension tubes different sizes Weight 20 kg Spacers can be sold separately. Kdsdpfx Ahsdwaymo Neg among

Condition: new, Year of construction: 2025, functionality: unexamined, machine/vehicle number: 10013174, A damaged industrial vacuum cleaner is being offered for sale. - Manufacturer: P. Ries GmbH, CH - Type: 250 D 2.2 kW - Year of manufacture: 2025 - Weight: 130 kg net Damage: The unit appears to have toppled over. The housing is dented and deformed in several places. No information is available regarding functionality. The unit is stored on a wooden pallet, with no external packaging. Sale: ex stock, without warranty or liability. Kdjdpoyaqc Ijfx Ah Neg

Condition: new, Year of construction: 2024, Wieland, made in Germany 12.5m rings, 300m/palet 10mmx1mm x isolation 9mm Kdsdpfsyapwqsx Ah Nog brandnew

Condition: used, mileage: 353,000 km, power: 353 kW (479.95 HP), first registration: 07/2010, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro5, suspension: steel-air, Year of construction: 2010, Equipment: ABS, electric window regulation, parking heater, power assisted steering, power mirror, retarder, trailer coupling, = Additional options and accessories = - Disc brakes - Gullet - High Beams - Immobilizer - Lift Axle - PTO - Radio - Radio CD player - Sleeping cabin - Speed limiter - Sper - Toolbox Kdsdpfxsx Da N Ro Ah Njg = Remarks = Structure Construction year: 2001 Material: Staal Scania G480, 2010, 353000km, Euro 5, 6x2, Opticruise with clutch pedal, Interconsult Stainless steel ADR tank (2001), 2x Waste water compartment (4000 + 9000 Liters), 2x Clean water (1000 + 1000 Liters), Tipper, Suction and pressure = More information = Front axle: Steering; Suspension: leaf suspension Rear axle 1: Double wheels Rear axle 2: Double wheels; Suspension: air suspension GVW: 28.000 kg Make of bodywork: Interconsult Tipper: Back = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 23-034, total width: 1,100 mm, total length: 4,570 mm, total height: 2,060 mm, A packaging machine from the company Smartvac which was exhibited at trade fairs. - Bottom film width: 320(+2/+4) mm - Top film width: 302(+/-1) mm - Peel length: 220 mm - Deep draw: 100 mm - Machine design for vacuum packs Maximum pack size: 281 x 202 x 100 mm Kedpjq H R Taefx Ah Nodg

Condition: used, mileage: 206,000 km, power: 353 kW (479.95 HP), first registration: 04/2009, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: soot filter, - Retarder - Stationary air conditioning - Lift and steering axle - Kaiser Aquastar 2 - 11,100-liter capacity Suspension: leaf-air Kdedpfx Ahsyammie Njg

Condition: used, mileage: 480,000 km, power: 338 kW (459.55 HP), first registration: 07/2018, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, emission class: euro6, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), Truck Truck: MAN TGS 26.460 First registration: km Retarder Automatic transmission Air conditioning 3rd axle steering axle Body: Spitzer/tipper 20 cubic meters 3 compartments Year of manufacture: 2009 with compressor Matching trailer available for €6,000 Trailer: Tipper/Spitzer Year of manufacture: 2009 22 cubic meters Price for truck only Tel: We are happy to assist you with financing or leasing Sale within the EU: net price with submission of company documents and VAT number VAT deposit: €2,000 Kdodpfoxgz A Dox Ah Neg We speak English We speak Serbian-Croatian Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station Tel: