Used Vacuum Table for sale (18,884)

Condition: as good as new (ex-display), 844224V0004 + 400000250, COOLVAC 1500 / COOLVAC1500, Oerlikon Leybold vacuum cryopump - as good as new Redoh Igffspfx Aa Djt Model: 844224V0004 + 400000250 Type: COOLVAC 1500 Condition: as good as new

Condition: good (used), Busch Vacuum Pump Rodpfx Aaswa Nzqj Dot Model 630 370 CFM

Condition: refurbished (used), Our Pfeiffer Vacuum Okta 2000 Roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts Redpfx Aofq D H Dea Dst be available at short notice included one-year warranty

Condition: good (used), Busch Vacuum Pump Rjdpswa Ra Uofx Aa Dot Model 400

Condition: good (used), Busch Vacuum Pump Type: 400-212 Rjdpfxewa Ucge Aa Dst 235 CFM Dimensions: 1300 mm x 800 mm x 1100 mm.

Condition: refurbished (used), Our Pfeiffer Vacuum Okta 1000 Roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts Rjdpfefq D Hyex Aa Dst be available at short notice included one-year warranty

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Turbo molecular pump: Serial number: 14219214 YoM: 2008 Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Max. Prevacuum pressure He: 1,0mbar Rsdpjncd S Uefx Aa Dot Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon 3. process dusts: chromium nitrite and steel 100Cr6 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: good (used), Busch Vacuum Pump Model 400-212 Rsdpfowa Unpsx Aa Djt

Condition: good (used), Rotating table Lazy Susan Perfect for buffering products, bags or trays prior to further handling. This to prevent from overflowing and giving several issues in (automatic) production lines. Height: 80 cm (height is adjustable) Diamter: 120 cm Rsdpfetpgxiex Aa Dot

Condition: refurbished (used), Our Pfeiffer Vacuum Okta 6000 Roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice Rsdpfsfq D H Sex Aa Det included one-year warranty

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 14219, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 560 mm, spindle diameter: 75 mm, spindle speed (max.): 1,800 rpm, With digital position display! TECHNICAL DETAILS X-axis: 1,250 mm Y-axis: 900 mm Z-axis (or W-axis): 560 mm Redjy Emq Tepfx Aa Dot Spindle diameter: 75 mm Spindle speeds: 18–1,800 rpm Spindle taper: SK-40 Table size: 950 mm x 950 mm MACHINE DETAILS Weight: 10,000 kg EQUIPMENT All accessories shown in the photos, including tools, tool cabinets, and clamping devices

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, spindle diameter: 128 mm, controller model: HEIDENHAIN iTNC530, The machine was overhauled and modernized in 2005. Repairs were carried out in 2025. The following work was performed: - Cleaning of the machine - Overhaul and adjustment of machine geometry - Overhaul of machine functionality - Overhaul of electrical equipment - Overhaul of hydraulics and lubrication - Backlash compensation and drive optimization - Replacement of guideway wipers - Repair of the telescopic cover Rsdpfxjy Edl Us Aa Dot - Overhaul of the CHOV-K 10 bar tool cooling system - Overhaul of the AVN40 tool changer TECHNICAL DETAILS Main spindle diameter: 128.57 mm Tool holder: ISO 50 Spindle speed range: 5,000 rpm Travel X-axis: 1,600 mm Travel Y-axis: 920 mm Travel Z-axis: 950 mm Clamping surface of table: 850 x 850 mm (850 x 1,600 mm including additional supports) Table load capacity: 3,000 kg MACHINE DETAILS Control: HEIDENHAIN iTNC530 EQUIPMENT - Handwheel - SIEMENS motors and drives - CNC table - full B-axis control - CHOV-K 10 bar - through-spindle cooling – emulsion - ATC40 - automatic tool changer - Operator console protected against chips and coolant - Workpiece cover

Condition: ready for operation (used), Year of construction: 1983, operating hours: 8,529 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, The machine was modernised and overhauled in 2002! TECHNICAL DETAILS Working spindle diameter: 100 mm Spindle speed range: 1,800 rpm Taper: ISO 50 Spindle travel (W): 630 mm Travel X-axis: 1,200 mm Travel Y-axis: 1,120 mm Travel Z-axis: 950 mm Table clamping surface: 1,000 mm x 1,120 mm Table load capacity: 3,000 kg Rjdpfx Aaoy Edgfo Dot MACHINE DETAILS Control system: HEIDENHAIN TNC426 Motors and drives: SIEMENS Operating hours (as displayed): Control system on-time: 37,038 h Machine operating time: 30,987 h Program run time: 8,529 h Spindle run time: 12,156 h EQUIPMENT Handwheel: HR410

Condition: used, Year of construction: 2024, New machine – Special price – Year of manufacture 2024 HAND GUARD Edition Single Flex unit. The image shows the system. HAND GUARD is based on early hazard detection to protect the operator from injuries and works in any application. The camera-monitored system first gives a visual warning to alert the user to an impending danger. If the hazard persists, the saw blade is lowered without causing any damage to the machine or material. HAND GUARD supports the processing of various materials such as wood, metal, and plastic. • Contactless and injury-free • Quick commissioning • 100% damage-free • Operates with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter can be fully retracted under the one-sided tilting saw unit as standard. Tilting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and tilt adjustment with a maximum saw blade protrusion of 179 mm (removal of the scoring unit may be required in some cases). Additionally, the control unit is positioned at eye level, allowing you to adjust the blade height and tilt, as well as, depending on the control package, the RPM and other functions. The new, clear industrial design marks the exceptional status of the Altendorf brand: This sliding table saw combines distinctive design with timeless aesthetics. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked steplessly in any position. The large double rollers keep the upper carriage absolutely precise in connection with the lower carriage within the respective guide rods. This running quality is maintained for decades, even under heavy use and contamination. The carriage construction is extremely torsion-resistant and dimensionally stable. An additional front support roller with a width of 300 mm is included, offering valuable support for cutting long workpieces on the rip fence. Positionable at 90° under the double roller carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction at the rip and angle fence when tilting the saw unit • Stepless fine control of the axes via +/# keys • Easy axis calibration • Machine diagnostics, operating hours counter, USB interface • Recall last dimension entry (back function) • Conversion of pointed to blunt measurements at the rip and angle fence • Shear cut function with automatic calculation of missing angles or dimensions • Advanced tool management for up to 100 tool memory slots • Storage of scoring position (3-axis scorer) • Input for main blade core thickness & cutting width • Input for main tool speed Additional functions • Grooving: automatic step-by-step positioning of the rip fence • Chain dimension function: cutting sequences with identical distances at the rip fence • Oversize angle cut • Calculator function with result transfer to the axes • Geometric shapes, calculation of missing angles or dimensions • False miters, calculation of missing angles or dimensions • 9999 storable cutting programs • Standard provision for remote maintenance • Template holder directly next to the touchscreen Included accessories for Edition Single Flex: • Double roller carriage with carriage length of 3000 mm • Vario drive 5.5 kW (7.5 HP) VAR Rsdpfx Aeyyap Eja Dot

Condition: used, Vacuum pump used for Homag/Weeke Redpfow I U Taex Aa Dst current supplier: Nash Elmo function-tested Motor 3.85 kW Minimum suction pressure 30 mbar Speed 3850 rpm with enclosure Availability: short-term Location: Flörsheim

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3695 € 2400 x 1200 mm 3000 kg 482 kg 200 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 2400 x 1200 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating Rsdsyq Sr Eopfx Aa Det * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2022 € 1500 x 1000 mm 3000 kg 272 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 1500 x 1000 x 100 mm with Cr75M+ hard chrome plating Rodpjyq Srxofx Aa Dst Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2697 € 2000 x 1000 mm 3000 kg 348 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 2000 x 1000 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm Rjdeyq Srrjpfx Aa Dst * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4862 € 3000 x 1500 mm 3000 kg 755 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 3000 x 1500 x 200 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model Rodpfxsyq Srls Aa Dst

Condition: new, neu ca. 6-8 Wochen ab Auftrag 10265 € 197.09 € 4000 x 2000 mm 850 mm 8000 kg Rodpfx Aoyq Sqzea Djt 2340 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3420 € 2000 x 1000 mm 850 mm 8000 kg 712 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners Rsdpfx Ajwir A Nja Dst

Condition: new, neu ca. 4 Wochen ab Auftragse 1940 € 2000 x 1000 mm 850 mm 449 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) Rjdpfx Aaewirwae Djt - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, neu 020520 ca. 2 - 4 Wochen ab Auftr 1318 € 28 mm Accessory set consisting of: 4 pcs. screw clamp 180° HIS28Z3000 2 pcs. screw clamp 45° HIS28Z3045 2 pcs. V-support HIS28VP100 12 pcs. quick clamping bolt short HIS28SB100 4 pcs. stop rail 150mm HIS28FA150 4 pcs. stop rail 225mm HIS28FA225 2 pcs. stop rail 175mm HIS28WA175 2 pcs. stop angle 275mm HIS28WA124275 and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L) Rjdpfowirrdex Aa Det OPTION: Tool cart HIS28WW1000 € 545,--

Condition: new, neu 2486 prompt, Zwischenverkauf v 545 € 1 28 mm Rodpfx Ajwirlqja Dot Tools are not included in the price.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2860 € 1500 x 1000 mm 850 mm 8000 kg 541 kg 200 mm 28 mm * - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes Redpfx Aajwiripo Dst - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners