Used Utp 200 Gw for sale (15,942)

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Nedpoyktrtofx Afajcr 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Nodoykub Aspfx Afascr Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, functionality: fully functional, pressing force: 200 t, table width: 730 mm, table length: 810 mm, MODEL ROVETTA FO-200 Nsdpeya Hidefx Afascr Nominal capacity: 200 tons Fixed stroke: 200 mm Tables: 730 x 810 mm Clearance between uprights: 760 mm Strokes per minute: 65 Vertical clearance between tables: 450 mm Working height: 800 mm "Spindle" ram adjustment: 100 mm Main motor: 11 kW Pneumatic cushion stroke: 100 mm Pneumatic cushion force: 25 tons

Condition: used, empty load weight: 4,150 kg, maximum load weight: 15,850 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 7,000 mm, loading space width: 2,500 mm, loading space height: 1,020 mm, loading space volume: 17 m³, total length: 7,000 mm, suspension: steel, tire size: 235/75 17,5, tire condition: 80 %, color: silver, Year of construction: 2022, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 410401 Fliegl, ZPS200K * Year of manufacture: 2022 * ABS, Anti-lock Braking System * Air connection coupling head (red + yellow) * Electrical connection plug 2x7-pin * Storage box / toolbox * Galvanized * Pneumatic locking * Suspension: leaf springs Nedpfey D E Ubsx Afaocr * Gross vehicle weight: 20,000 kg * Unladen weight: 4,150 kg * Payload: 15,850 kg * Permissible gross weight: 20,000 kg * Axle manufacturer: SAF % * Tire condition 1st axle: 80%|80% -- 80%|80% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 80%|80% -- 80%|80% - Tire size: 235/75 R17.5 * Tire size: 235/75 R17.5 * Internal dimensions: L=7000 mm, W=2500 mm, H=1020 mm * Internal volume*: 18 m² * Pallet spaces: 17 * Suitable for roll-on and skip containers * Roll-off containers 5000-7000 mm length * Lowerable drawbar * Compartment for loading ramps * External dimensions * Ride height: 1020 mm * Platform length: approx. 7000 mm * Pneumatic locking * Duomatic air connection Disclaimer: Subject to changes, prior sale, and errors excepted. More photos and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Fast, uncomplicated financing * Application for all (export) documentation * Arranging export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our qualified staff for advice – we are happy to assist you.

Condition: used, empty load weight: 4,150 kg, maximum load weight: 15,850 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 7,000 mm, loading space width: 2,500 mm, loading space height: 1,020 mm, loading space volume: 17 m³, total length: 7,000 mm, suspension: steel, tire size: 235/75 17,5, tire condition: 80 %, color: silver, Year of construction: 2022, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41040 Fliegl, ZPS200K * Year of manufacture: 2022 * ABS, Anti-lock Braking System * Air connection coupling head (red + yellow) * Connector plug 2x7-pin * Storage box/toolbox * Galvanized * Pneumatic locking system * Suspension: Leaf spring Ncjdpfxey D E Uho Afasr * Gross vehicle weight: 20,000 kg * Unladen weight: 4,150 kg * Payload: 15,850 kg * Permissible total weight: 20,000 kg * Axle manufacturer: SAF% * Tire condition 1st axle: 80%|80% -- 80%|80% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 80%|80% -- 80%|80% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Internal dimensions: L=7000 mm, W=2500 mm, H=1020 mm * Internal volume*: 18 m³ * Pallet spaces: 17 * Suitable for roll-off and skip containers * Roll-off containers 5000–7000 mm length * Lowerable drawbar * Storage compartment for drive-on ramps * External dimensions * Ride height 1020 mm * Platform length approx. 7000 mm * Pneumatic locking * Duomatic air connection Liability disclaimer: Subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing options * Handling of all (export) documentation * Ordering of export license plates/customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV approval, registration services * Transportation of commercial vehicles Contact our trained staff—we are happy to advise you.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 175118, operating hours: 3,203 h, spindle speed (max.): 12,000 rpm, Mazak FJV-200 (2005) Serial Number: 175118 Through Coolant BT40 Tooling Mazatrol 640M control 30 Tool magazine 12,000 rpm main spindle full set of manuals This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs. Nsdov Txpljpfx Afaecr

Condition: good (used), Year of construction: 1999, operating hours: 1,887 h, functionality: fully functional, machine/vehicle number: 142031, spindle speed (max.): 5,000 rpm, Mazak Super Quickturn 200 (1999). Serial Number: 142031. Date: 1999. Weight: 5000kg/11,000lbs. Mazak tooleye measuring system. Tailstock. Swarf Conveyor. Parts Catcher. 12 Station Turret. Mazatrol PC-Fusion- CNC 640T control panel. Main Spindle Max 5000RPM. Collet Chucks and Collets. Hydrafeed barfeeder NOT included. Nodpfx Aotz A Dfofaocr This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11/15 [kW] - Torque : 51/110 [Nm] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 66 [mm] - Max. turning diameter : 340 [mm] - Max. diameter on bench : 400 [mm] - Max. chuck diameter : 190 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 227.5 [mm] - Y stroke : +/- 41 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 3.7/5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 21 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2000 X 1600 [mm] - Machine height : 1850 [mm] - Machine weight : 4300 [kg] EQUIPMENT Nodpfx Aevzt Hbsfaecr - CNC : Fanuc - Interface : Ethernet / RS232 / USB / PCMCIA - Coolant tank - Chips conveyor - Oil mist extractor : DONALDSON - Tool probe - Parts catcher - Parts conveying strip - Fire extinguisher * : SIEMENS * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 2 - Number of fixed tool holders : 4 - Collet chuck : EROWA

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11/15 [kW] - Torque : 218/258 [Nm] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 66 [mm] - Max. turning diameter : 340 [mm] - Max. diameter on bench : 400 [mm] - Max. chuck diameter : 190 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 227.5 [mm] - Y stroke : +/- 41 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 3.7/5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 21 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2000 X 1600 [mm] - Machine height : 1850 [mm] - Machine weight : 4800 [kg] MACHINE HOURS - Number of hours under power : 69240 [h] EQUIPMENT - CNC : Fanuc - Interface : Ethernet / RS232 / USB / PCMCIA - Coolant tank Nedpfou Uu R Nsx Afajcr - Chips conveyor - Oil mist extractor : DONALDSON - Tool probe - Parts catcher - Fire extinguisher * : SIEMENS * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 1 - Number of fixed tool holders : 4 - Collet chuck : EROWA

Condition: used, mileage: 200,000 km, power: 265 kW (360.30 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, emission class: euro6, Equipment: ABS, air conditioning, parking heater, Mercedes Antos 2536 First registration: 04/2015 ONLY 209,000 km Ncjdpfx Afsy D Dgpeasr Flatbed/Tarpaulin Sliding tarpaulin Neutral tarpaulin without advertising Wheelbase 4600 mm Air suspension front/rear Air conditioning Auxiliary heater German vehicle !!!! MATCHING TRAILER AVAILABLE FOR €6,900 !!!! ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran german/english/p?????/?????..... Roman We are happy to assist with your financing or leasing EU sale: net price with presentation of company documents and VAT number VAT deposit €2,000 Our service for you: - Export plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: new, functionality: fully functional, power: 213.29 kW (289.99 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, tail-lift, trailer coupling, From our range, we offer you: Equipment Carrier Logistics GW-L2 All-Wheel Drive on Off-Road MAN TGM 13.290 Chassis A vehicle for many tasks. Ideally suited for storm response as well as setting up water supply lines over long distances, even in challenging terrain such as forest and vegetation fires. Serves as a modular replacement for rescue and equipment vehicles, or with water tanks for firefighting water transport. Or... exactly right for your specific needs! Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 HP (213 kW) and automatic transmission • Single tires with equal track width for high off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) Njdpoxqlmusfx Afascr • Cab equipped with auxiliary heater Bodywork: • High-quality bodywork made from rust- and corrosion-free materials • Two spacious side equipment compartments • Fold-out steps at each side compartment • Individually customized stainless-steel equipment storage solutions Tail Lift: • BÄR tail lift BC2000 • Aluminum platform Bär BC2000 S4-C4 • Platform dimensions 1810 mm x 2520 mm (height/length x width) • Two-button foot control • Dual roll-off safety locks • LED platform lights Safety and Lighting • LED mini lightbar on the vehicle roof / 2 LED front flashers • Pneumatic special signal system MARTIN-HORN • Rearview camera • Comprehensive LED lighting in the crew and all equipment compartments • LED perimeter lighting on the superstructure and auxiliary headlights • Pneumatic LED light mast with remote control We would be pleased to provide you with a detailed quotation and present the vehicle to you at our Berlin location. All information is given to the best of our knowledge and belief, but without guarantee of completeness or accuracy. This advertisement is for informational purposes only and does not constitute a binding offer. Subject to prior sale!

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, tail-lift, trailer coupling, From our range of new vehicles, we offer: All-wheel drive Equipment Transport Vehicle GW-L on off-road capable MAN TGM 18.320 chassis Our robust powerhouse for heavy loads. Its superior off-road capabilities ensure reliable performance even in tough conditions. Suitable for operations such as severe weather response, setting up water supplies, as a modular rescue or equipment vehicle—also available with winch—or as an auxiliary tanker (TLF) with water tanks. Ncodpfxsxyud Ue Afajr Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW), automated transmission • Super single tires, matched track width, for maximum off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Cab with auxiliary heater Body: • High-quality bodywork made from rust- and corrosion-resistant materials • Two spacious side equipment compartments • Fold-out steps for each lateral equipment compartment • Customizable stainless steel equipment racks tailored to your requirements Tail Lift: • BÄR tail lift BC2000 • Aluminum platform Bär BC2000 S4-C4 • Two-button foot control • Dual roll-off protection • LED platform lighting Safety and Lighting: • LED mini lightbar on the vehicle roof / 2 LED front flashers • Pneumatic special signal system MARTIN-HORN • Rear-view camera • Comprehensive LED lighting in the crew and all equipment compartments • LED perimeter lighting on the body and additional floodlights • Pneumatic LED light mast with remote control We would be pleased to provide a detailed quote and present the vehicle to you at our location in Berlin. All information provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This ad does not constitute a binding offer, but is for informational purposes only. Subject to prior sale!

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, rotary table diameter: 1,700 mm, rotational speed (max.): 10,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Universal Machining Center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 1,800 mm Y-axis: 2,000 mm Z-axis: 1,100 mm B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Speed range: 10,000 rpm Drive power: 44 kW Tool holder: SK 50 Tool changer Nodpfx Afsxuqn Seaecr Tool stations: 60 NC rotary table Table size: 1,700 x 1,400 mm Max. table load: 5,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe Electronic handwheel

Condition: used, mileage: 2,750 km, power: 90 kW (122.37 HP), fuel type: electric, gearing type: automatic, overall weight: 2,390 kg, first registration: 11/2024, color: black, suspension: steel, number of seats: 5, fuel: electricity, Equipment: ABS, air conditioning, airbag, central locking, cruise control, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, traction control, E07 Hill Start Assist, F2W Winter Package, EY5 Mercedes-Benz Emergency Call System, SD1 i-Size Child Seat Attachment, EY6 Breakdown Management, B25 Electric Parking Brake, EI0 Wireless Charging System for Mobile Devices, T68 Child Safety Locks for Doors and Windows in Passenger Compartment, Z1M Registration M1, IA0 Wheel Configuration 4x2, LG7 LED High Performance Headlights, XO7 Mercedes-Benz Mobilo with DSB and GgD, EZ7 Active Park Assist, Q10 Crossmember for Trailer Hitch, T78 Sliding Door Rail Cover in Vehicle Color, Y10 First Aid Kit, 804 AEJ X3/1, VL2 Velour Floor Mats, SF6 Height-Adjustable Driver's Seat with Lumbar Support, RD9 Tires Brand-Free, H00 Warm Air Duct to Passenger Compartment, NM5 MB-NA 60 2b with Flange, Lowered Suspension, Medium RPM, C6L Multifunction Steering Wheel, H10 Heated Seats for Driver and Passenger, H22 Heated Rear Window, EM7 2 USB Interfaces in Rear Center Console, Y44 Warning Triangle, GA2 Automatic Transmission for Electric Drive, P2F Active Safety Package, FP3 Mirror Package, FP4 Chrome Interior Package, XC8 VIN Visible from Outside, SZ6 Table and Illuminated Trim Elements on Backrest, Z6L Progressive, JH3 Communication Module (LTE) for Digital Services, X30 Registration Certificate Part II, FQ3 Glove Compartment, Closed, Passenger Side, I5T Plastic Underbody Protection, RY2 Tire Pressure Monitoring on Front and Rear Axles, Wireless, CK4 Handle Bar above License Plate in Vehicle Color, 054 AEJ X3/2, CK8 Heated Steering Wheel, XU1 Labels / Documents in German, IG4 Standard, SK5 Automatic Passenger Airbag Deactivation, I6I With Belt for Center Seat in Rear, W29 Fixed Rear Window, CL1 Height and Tilt Adjustable Steering Wheel, CL3 Leather Steering Wheel, FR8 Reversing Camera, SL2 Height Adjustable Passenger Seat. You can reach us by phone Monday to Friday until 20:00, and Saturday until 16:00!! Ncjdpfx Afsy Dz S Aeaer Further information: Leasing/Financing and trade-in possible!! Errors and prior sale reserved!! All information without guarantee ... more on our homepage

Year of construction: 2018, condition: used, Manual length adjustment via handwheel with digital display For mounting on any Elumatec single- blade saw (left) Max. feed length: 3,000 mm Pneumatic parking brake Nsdpoyz U T Iofx Afajcr

Condition: good (used), Year of construction: 2005, Clamping force: 200 t Screw diameter: 50 mm Screw dia 2 : 22 mm Distance between tie bars V: 580 mm Distance between tie bars H: 580 mm Type: Multicomponent (2K injection) Ncedpfsyz Tmyox Afajr Drive: Hydraulic 2x hydraulic valve

Condition: new, Year: 2023 Ncjdpfxoyz Sxhj Afajr Condition: Used Serial Number: 273-00-129 Stock Number: 2948 Cutting diameter: max. 200 x 180 mm Description: Includes extra blade Chamber length: 720 mm Thickness: 1 - 30 mm Speed: 210 / 420 cuts per minute Power: 3 x 400V, 50Hz, 3.5kW Dimensions: 2100 x 900 x 1200 mm Weight: 320 kg

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, Year of Manufacture 2000 Technical Data: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Ncjdpfoyz R Uusx Afaor Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput performance at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, Cardboard, Film The baler is in good condition and has been checked and tested. A video is available on our website or YouTube channel. Complete documentation is available. Please note: All technical data is based on manufacturer’s information. No liability is accepted for the data provided or for potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, advance payment only, without warranty or guarantee.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Machine in very good technical and visual condition; model year: 2019; includes new Powerhand VRS 200 vehicle recycling system. Nedpfxey Dv Sqo Afaocr

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 05/2027, overall weight: 940 kg, total width: 1,200 mm, total length: 1,175 mm, input frequency: 50 Hz, input current: 10 A, electrical fuse: 16 A, Lifting Kneader ++++ TOP Model Diosna mobile kneader ++++ Dough machine with simple, robust technology for up to 200 kg of dough Stainless steel bowl and kneading arm 2 bowl trolleys, 2 speeds Connection 400V, 32A-CEE plug Used machine, refurbished with warranty + service Option: Delivery service Leasing & rental service Maintenance contract Service package Nsdeu A Hhropfx Afaecr Delivery with floor anchoring Training & commissioning We carry a large selection of lifting kneaders in stock!

Condition: good (used), Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. - Up to approximately 30 strappings per minute. - Internal frame dimensions approximately 850 x 800 mm. - Secure strapping with 12 mm strap. - Automatic strap feed and strap return. - Adjustable strap tension. - Strapping can be triggered via hand button or foot switch, or alternatively, automatic mode selectable (sensor in the table top). - Simple and ergonomic spool change and threading system. - Equipped with ergonomic roller conveyors on the table surface. - Working height approximately 820 mm. - Machine can be moved and locked in place on castors. Nedpfx Afey Dvcioaecr The machine can be demonstrated under power.

Condition: good (used), Year of construction: 2016, Type: KMRS-200 Serial number: 17508-001 Year of construction: 2016 Capacity: 700 pc/h Belt width: 325 mm Nodpoypbzaofx Afascr Diameter cutting ring: 270 mm CIP unit: hot water min. 60 degrees Celsius Compressed air: 5 Bar, 3.5 Nm³/h Power: 3 x 400V, 50Hz, 2kW Dimensions: 1600 x 1150 x 1500 mm

Condition: new, functionality: fully functional, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,067 mm, loading space height: 400 mm, total length: 2,910 mm, total width: 1,500 mm, total height: 900 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz HIT 200 Tipper NEW VEHICLE Internal dimensions: 201 cm x 106 cm Gross weight: 750 kg Payload: 622 kg Side wall height: 40 cm Unbraked single-axle low-bed trailer Removable side walls made of galvanized steel sheet Rear and front panels foldable and removable Easily convertible to a flatbed transport platform Bolted and galvanized steel frame Folding drawbar Phenolic plywood floor 13-pin electrical system Rear lights with reversing light, fog light, and triangular reflectors Plastic fenders Jockey wheel 13-inch M+S tires The trailer can be stored vertically on the rear panel when not in use Optional accessories: - 100 km/h upgrade - Rear support stands - Mesh sides - Side extension panels 40 cm - Aluminum lid with holder (e.g., for bicycle carriers) - Flat tarpaulin with or without bows - High tarpaulin 80 cm - Coarse or fine mesh net - Spare wheel with holder - Loading ramps Additional accessories available on request! Images are for illustration purposes and may show optional equipment subject to extra charge. Plus vehicle registration documents and shipping to Gera €100 net Haven't found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate pickup. Ncedpfx Afsy Dq Dhjajr The workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravan trailers. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get expert advice by phone, visit our website, or stop by in person.

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: Ncsdexbhtropfx Afaer KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Impeller: Grey cast iron Shaft, pump: Tempered steel

Condition: good (used), Seydelmann GW 300 Frozen Meat Grinder Ncjdpjy Dquyofx Afaer Thanks to their robust construction and their extremely strong power of motor, Seydelmann Frozen Meat Grinders guarantee a perfect cutting image even when grinding whole frozen meat blocks down to -25 °C (-13 °F). A very high hourly output and a very uniform grain size is achieved with any material. Seydelmann Frozen Meat Grinders can be integrated ideally into production lines. The machine frame is made of stainless steel and completely closed so that all pipes, motors and other parts are integrated into the machine. All edges are rounded and all surfaces on the machine are polished very precisely and designed with a slope so that cleaning water will drain completely from all surfaces. Thanks to embedded covers and the closed bottom of the machine frame water cannot enter the machine and pollution is prevented. The first stage of the size reduction process takes place in the hopper with the worm of the Frozen Meat Grinder. With its extended profile and relief grinding windings, the worm cuts off approximately 8 cm (3.2 in) of the frozen meat block with every rotation, and carries the meat to the cutting set for grinding. The GW 300 is equipped with a two-speed drive. The first speed is for deep-frozen blocks of meat or when using hole plates with small holes and the second speed is suitable for reduction with hole plates with bigger holes. Manufacturer: Seydelmann Model: GW 300 Hole plate diameter: 300 mm Capacity: Up to 10.000 kg/h Power of motor: 78/105 kW Power of AC-6 motor: 140 kW Hopper capacity: 450 Liters Machine dimensions LxWxH: 2.700x1.500x2.400 mm Conveyor dimensions LxWxH: 2.500x900x2.100 mm Total weight: 3.300 kg.