Used Used Transformers for sale (40,700)

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 6V0146, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Crodpfx Aowmm S Tskcjb Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex display Dyson apprentice training facility, in excellent condition

Condition: used, Year of construction: 2006, operating hours: 5,983 h, machine/vehicle number: LC628, Used Tetra Pak A3/FLEX Cap30 Square 1LTechnical Specifications & Performance DataThis used bottling line configured around an A3/Flex aseptic carton system delivers reliable performance for beverage production and industrial packaging. Optimized for 1.0L square cartons with HeliCap 27 closures and compatibility for Cap30, the line integrates filling, cap application, and thermal treatment via a pasteurizer upgraded with a new automation system. Low operating hours make this second hand packaging line a compelling option for cost-effective capacity expansion.Main system: A3/Flex aseptic carton packaging platformPackage format: 1.0L square cartons (A3F 1000SQ)Closures: HeliCap 27; Cap30 compatibilityOperating hours: 5,983.5 h (indicative meter reading)Thermal treatment: Pasteurizer with new automation systemAuxiliaries: Brand new air compressor, 6–8 bar, sized for the whole lineIncluded cap application: TCBP70 moduleLine status: Stopped for strategic reasons; restarted intermittently since October; currently pausedAdvanced Automation & Control SystemsThe pasteurizer has been modernized with a new automation system for improved process stability and ease of operation. The A3/Flex platform is designed for high-repeatability forming, filling, and sealing of cartons with automated cap application. Safety interlocks, emergency stops, and clear operator interfaces support dependable day-to-day running and rapid troubleshooting.Automation refresh: New pasteurizer automation for consistent heat treatmentCap application control: Precise application for HeliCap 27 and Cap30Changeover support: Quick adjustments between compatible closures and 1.0L square formatOperator safety: Guarded access and emergency stop circuits typical of modern packaging machineryProduction Line Integration CapabilitiesEngineered for inline operation, the system integrates forming/filling/capping with downstream thermal treatment and utilities. The included air compressor supplies the pasteurizer, A3/Flex module, and downstream equipment, simplifying installation and ensuring stable pneumatic performance across the production line.Inline configuration: A3/Flex with TCBP70 capper and pasteurizerUtilities integration: Centralized compressed air (6–8 bar) for the entire lineFormat focus: 1.0L square cartons, with closure flexibility (HeliCap 27, Cap30)Application: Industrial packaging and beverage production in aseptic carton formatMachine Condition & Maintenance HistoryThe line is reported in very good condition with low cumulative hours. It was stopped for strategic reasons, restarted intermittently since October, and is currently paused. The pasteurizer features a new automation system, and the line includes a brand new air compressor to support reliable pneumatic supply.Condition: Very good Crodpfx Akjy N Aaxscsb

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Year of manufacture 1988, cutting capacity 5300 x 2200 mm, cutting thickness 80 mm, horizontal cutting height 2100 mm, integrated extraction unit, manual or automatic feed 11/17/22/33 m/min, machine width 6300 mm, saw blade 300 ø, 7.5 HP motor, digital measuring system horizontal and vertical, Crjdpfjy Nyr Sex Akcjb machine ready for immediate use, very good condition ex location Transport possible at extra cost!

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Crsdpfx Akoyhbt Hsceb Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: used, Year of construction: 2000, operating hours: 26,600 h, machine/vehicle number: LC612, Used Tetra pak line Overhauled TBA 19 200 ml slim Technical Specifications & Performance DataThis used bottling line is a second hand Tetra Pak aseptic carton packaging solution configured for 200 ml Slim packs. It is engineered for industrial packaging and beverage production of milk and juice products, with reliable performance and efficient downstream handling.Configuration: Tetra Pak TBA/19 200B Slim filler + TSA21 straw applicator + TCP70 case packer + conveyor line + line controller and paper trolleyProduction speed: up to 7,500 packs/hourPack volume: 200 ml SlimFilling technology: AsepticContainer type: Carton (brick packs)Main models and codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70Operating hours: 26,600Indicative years: filler 2000, packer 2008, straw applicator 2000Advanced Automation & Control SystemsThe line is equipped with industrial automation architecture suitable for high-uptime food and beverage operations. Assessment indicates a GE PLC platform on downstream equipment with recommended PLC and I/O cover upgrades to ensure long-term reliability.Control: Central line controller with integrated conveyor logicPLC/HMI: GE PLC upgrade recommended for DE modulesChangeover: 200 ml Slim change kit included; additional format parts may be required for other sizesSafety: Guarding and interlocks typical of aseptic packaging machineryProduction Line Integration CapabilitiesThis second hand bottling equipment is designed for inline operation from aseptic filling through straw application and case packing. Conveyors provide smooth transfer between machines, enabling balanced production flow and efficient accumulation.Inline operation: Filler → Straw applicator → Case packerMaterial handling: Conveyor line with integration to line controllerApplication range: Ideal for milk and juice in 200 ml Slim cartonsScalability: Potential to adapt to additional carton sizes with proper change partsMachine Condition & Maintenance HistoryThe line has been assessed after maintenance activities and prior to full recommissioning. The filler can be operated up to production step (water test completed). Downstream equipment (DE) powers on but requires further interventions before heating and full operation. An overhaul is recommended with component replacements across superstructure, machine body, jaw system, final folder, service unit, strip applicator, and electrical systems.Current status: Under maintenance/refurbishmentCondition summary: Filler fair-to-poor; DE in poor condition; overhaul advised (6,000/8,000/12,000-hour packages)Operational Performance & VersatilityEngineered by Tetra Pak for aseptic beverage production, the line supports long-life products such as UHT milk and ambient juices. The TSA21 straw applicator ex... Credpfjyvilzjx Akcjb

Condition: used, Year of construction: 2021, operating hours: 36,090 h, machine/vehicle number: LC626, Used Tetra Pak Cap30flex - year 2014Technical Specifications & Performance DataThis second hand Tetra Pak Cap 30 Flex is a high‑reliability cap applicator engineered for industrial packaging and beverage production lines. It is configured for HeliCap 26 Pro closures and optimized for the Square 1000 package format, corresponding to 1.0L cartons. Built for continuous operation, it supports modern used bottling line upgrades and integration with existing carton filling and downstream packaging equipment.Manufacturer: Tetra PakModel: Cap 30 FlexYear: 2021Closure type: HeliCap 26 ProPackage format: Square 1000 (1.0L carton)Container compatibility: CartonCompliance: CE markedApplication: Cap application/capping for carton packagesAdvanced Automation & Control SystemsThe Cap 30 Flex is designed with robust automation architecture for precise, repeatable cap application. Typical features include PLC-based control, an HMI for recipe selection and format management, and coordinated drives for accurate positioning and torque control. Integrated sensors support cap presence detection and fault handling to minimize downtime. Quick access panels and guided diagnostics streamline routine checks, while recipe parameters help reduce human error during changeovers.Production Line Integration CapabilitiesEngineered to interface seamlessly with Tetra Pak filling machines and standard conveyor systems, this capping machine fits inline as part of a complete packaging solution. The cap feeder and chute are designed to maintain stable, high-throughput cap delivery with minimal jams. Mechanical and electrical interfaces facilitate synchronization with upstream filling and downstream inspection, case packing, and palletizing equipment, enabling flexible second hand bottling equipment configurations for beverage production.Machine Condition & Maintenance HistoryThe machine is currently disconnected, indicating it has been removed from production and prepared for relocation and recommissioning. Its CE marking and recent manufacturing year contribute to a solid foundation for reliable operation after standard installation, alignment, and validation procedures typically performed during start-up of used bottling equipment.Operational Performance & VersatilityConfigured for HeliCap 26 Pro closures on Square 1000 cartons, the Cap 30 Flex delivers consistent application quality suitable for demanding beverage packaging standards. Its design supports precise cap alignment and secure application to protect product integrity throughout the supply chain. The system’s modular nature helps accommodate line layout constraints and supports continuous runs common in industrial packaging environments.Installation Requirements & Site PreparationInstallation typically requires stable flooring, adequate space for the cap feeder and operator access, and standard utilities appropriate for packaging machinery, including electrical power and compressed air. Proper line height alignment with the filler and conveyors ensures smooth package handling. Commissioning includes control ... Codey I R Hqepfx Akcjrb

Condition: used, Year of construction: 2017, operating hours: 30,000 h, machine/vehicle number: LC566, Crjdpfjy I R Easx Akcjb Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging

Condition: used, Year of construction: 2011, operating hours: 1,878 h, machine/vehicle number: LC622, Used Tetraa Pak AB straw applicator 2011Technical Specifications & Performance DataThe Tetra Pak Straw Applicator 30 is a dedicated packaging machine engineered to apply individual drinking straws to carton packs with precision and consistency. Built by Tetra Pak Packaging Solutions AB, this unit is well suited for integration into beverage production and industrial packaging lines handling carton packages. As a second hand asset with low recorded operating hours, it provides a reliable, cost-effective option for upgrading or expanding a used bottling line or carton packaging setup.Machine type: Straw Applicator 30Manufacturer: Tetra Pak Packaging Solutions ABModel: 30Year of manufacture: 2011Format: Tetra classic aseptic (Tetrahedral)PLC: based with HMI operator panelCE marking: YesOperating hours (hour meter): 1,878.6 hDrawing specification: 86335D-300Container compatibility: Carton packagesPrimary function: Automated application of individual straws to preformed, filled, and wrapped cartonsProduction speed: Dependent on pack format and line speedAdvanced Automation & Control SystemsDesigned for dependable operation in demanding packaging environments, the Straw Applicator 30 features an industrial control architecture with operator-friendly HMI for set-up, monitoring, and diagnostics. Automated detection and verification functions help ensure that each straw is correctly picked, positioned, and affixed to the passing carton, supporting high-quality output and reducing rework.PLC-based control with HMI for recipe management and status visualizationIntegrated sensors for straw presence and placement verificationAlarms and fault diagnostics to support rapid troubleshootingQuick-change parts to facilitate format adjustmentsCE-compliant guarding and interlocksProduction Line Integration CapabilitiesThis machine is intended to run inline with carton filling and downstream packaging systems. It synchronizes with upstream carton conveyors and downstream bundling or case packing equipment to maintain smooth product flow and overall efficiency.Inline integration with carton fillers and conveyorsInterface-ready for upstream/downstream signal exchangeFormat change flexibility for multiple carton sizes and straw typesSuitable for beverage production environments focused on carton packagingMachine Condition & Maintenance HistoryThe unit presents as a well-preserved, second hand machine with low operating hours indicated by the onboard hour meter. CE marking and reputable OEM engineering support ongoing reliability in industrial applications. Preventive maintenance and spare part support should follow Tetra Pak guidelines to preserve uptime and performance.Operational status: Ready for operationLow-hour profile supports extended service potentialO... Csdpfjy Iz Tzex Akcerb

Condition: used, Year of construction: 2010, machine/vehicle number: LC625, Used ALFA LAVAL S16 Olive Oil Line - year 2010Technical Specifications & Performance DataThis complete olive oil extraction line assembles proven components to deliver continuous, efficient processing of olive paste into high-quality oil. Designed around Alfa Laval core technology and complementary equipment, it offers industrial-scale throughput with reliable separation and thermal conditioning.Capacity: 2.5–3 t/h (tonnes per hour) of olivesManufacturing year: 2010Main manufacturer: Alfa LavalDecanter: Alfa Laval S16Separators: Alfa Laval 507 (2 units, with support frame)Crusher: Alfa Laval, 25 HPWasher: Santoro washer with destonerMalaxers: 4 units, stainless steel, 500 L each, independent dischargePaste pump: Bellin, stator size 16Elevator belt: Alfa LavalPomace screw conveyors: Officine MottolaThermal unit (boiler): D’Alessandro Termomeccanica CS 130, nominal output 130 kWHeat exchanger: Hot-water heat exchanger for thermal conditioningElectrical panels: Main electrical panel and dedicated pump control panelElectrical data (boiler): 380 V, 50 Hz, electric absorption 0.42 kWStandards: CE componentry; boiler EN 303-5 Class 3Advanced Automation & Control SystemsThe line features centralized power distribution via a main electrical panel and a dedicated pump control panel for modular equipment management. Operators benefit from straightforward control of feed, crushing, malaxing, decanting, and separation stages. Safety interlocks and standard protections on rotating equipment and hot-water circuits support consistent, secure operation. Quick mechanical adjustments enable fine-tuning of malaxing time and thermal setpoints for optimal extraction efficiency and quality.Production Line Integration CapabilitiesEngineered for continuous extraction, this second hand processing line integrates upstream receiving and washing with downstream decanting and polishing. The elevator belt, washer with destoner, and crusher ensure uniform paste preparation, while the decanter and twin separators provide high-clarity oil. The system can be connected to storage tanks, filtration skids, or paired with a used bottling line for edible oil to complete industrial packaging workflows. Flexible piping and standard connections simplify integration into existing food and beverage production facilities.Machine Condition & Maintenance HistoryThis is a complete, second hand olive oil extraction line offered in working condition with a 2010 build year for the core process equipment. Components from leading manufacturers such as Alfa Laval, Santoro, Bellin, Officine Mottola, and D’Alessandro Termomeccanica support dependable operation and serviceability. The line configuration and included equipment reflect an industrial-scale installation ready for recommissioning.Operational Performance & VersatilityThe washer with dest... Crjdpfx Akoy Iz Tusceb

Condition: used, machine/vehicle number: LC596, Used complete line for still wine - 5000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging.Container type: Glass bottlesCore monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping)Filtering: Seitz Orion plate filtration groupBottle preparation: SICK Blancamat 8 bottle washer (pre-labeling)Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate)Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labelerConveying/accumulation: MBF accumulation table (conveyor)Case handling (option set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizerCase handling (option set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider inserterAuxiliary equipment: PREO E0P051 4R2 hotmelt units, Ber PDC 30 carton scaleSelected component years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30)Certifications: CE markings on Mas Pack modulesAdvanced Automation & Control SystemsThe line combines automated capsule application, adhesive labeling with multi-station control, and end-of-line carton forming, gluing, and packing. Modules feature integrated safety circuits and CE-compliant controls. Hotmelt application is handled by PREO melters for reliable carton sealing. Quick adjustments across labeling stations and format handling enable efficient changeovers within glass bottle families.Adhesive labeling with 3-station control for front/back/neck labelsAutomated heat-shrink and polylaminate capsule applicationHotmelt application via PREO E0P051 4R2 unitsCE-compliant electrical panels on Mas Pack packaging modulesOperator-friendly HMI/controls at packaging stations (per module)Production Line Integration CapabilitiesDesigned for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyorized accumulation table assists with buffer management for steady flow between wet and dry ends. The end-of-line can be configured with either Bortolin & Kemo or Mas Pack equipment to match site preferences and spare parts policy.Inline glass bottle processing from filtration to palletizingFo.. Crodpoyhbhqofx Akcob

Condition: used, machine/vehicle number: LC426, Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Codpfxovgvwmj Akcjrb Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Quality Control of the Used Bottling Line KRONES Maintaining product quality is paramount in any bottling operation. Therefore, the 1999 KRONES CHECKMAT inspector plays a pivotal role in this regard in the Complete Bottling Line KRONES. With advanced functionalities encompassing not only level control but also meticulous label inspection, it ensures that every product meets the desired standards. Furthermore, the 2000 ACI TA20 2 AE bottle dryer guarantees that bottles are impeccably prepared for subsequent labeling and packaging stages, effectively eliminating any potential issues that may arise from moisture. Labeling and Packaging Efficient labeling and packaging are essential components of the KRONES bottling line. Consequently, the 1999 KRONES STARTMATIC K-080-669 excels in these areas. With precise label application capabilities, coupled with the ability to print directly onto glass bottles, it not only streamlines operations but also elevates brand presentation in the Used bottling line KRONES for glass bottles up to 20000 bph. Complementing this is the 1999 SMI SMI/7507 case packer and the 1997 FRANPACK Typ 121971214 pallet wrapper, ensuring that products are securely packaged and ready for distribution. Operational Status and Specifications The KRONES bottling line is in flawless working condition, and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the line promises to enhance operational efficiency while maintaining product quality. Specifically designed for glass containers and primarily catering to beer production, it guarantees precise and consistent fills, ultimately resulting in superior product quality and customer satisfaction. In summary, the KRONES bottling line represents a sound investment for businesses seeking to optimize their bottling operations. With its robust construction, cutting-edge features, and proven track record, it is poised to deliver exceptional performance and elevate production standards to new heights.

Year of construction: 2005, condition: excellent (used), Name: Vertical heating cooling mixer Manufacturer: Lödige Type: TSHK160 / KGU400 Year built: 2005 Speed: 104 / 300-1500 rpm Hours of operation: Very few operating hours Material: Stainless steel Driving force: 11 / 45 kW Credoiup H Tepfx Akcjb Model: ATEX version / Explosion proof Total content: Heating mixer: 210 liters / cooling mixer: 391 liters Parts in contact with product: 1.4541 Gear box: Bevel gear motor/ motor frequency controlled Dimensions: L 4605 x W 4225 x H 3550 mm Technical doc.: Yes Message: Technical center operation. Wood chips / melanin wood additives Accessories: Platform with stairs, 30 kW temperature control unit, control panel, control cabinet, dust filter

Condition: used, functionality: fully functional, Used insulated 10ft container with three layers of layout including internal mounting material. Outside dimensions: 320cm x 240cm x 250cm (LxWxH) Internal dimensions: 270cm x 210cm x 210cm (LxWxH) Lockable with padlock. Stackable. Double-walled. Double-door, opens on two sides. Crsdowm Dv Ajpfx Akcsb Weight: ~2500 kg

Condition: used, Used Morton-Lodige stainless steel ploughshare mixer. Unit believed to be FKM1200D. Used Morton-Lödige FKM1200D ploughshare mixer approximately 1200 litres capacity. Unit measures approximately 1750mm long x 1000mm diameter. Unit has stainless steel ploughshare blades and (2) stainless steel half ploughshare blades driven by motor/gearbox. Unit has a pneumatically operated bottom entry discharge valve. Has provision for (2) choppers but none currently fitted. Unit is mounted on a mild steel frame. Specifications: Bowl Volume: 1,200 L Codpfx Akjy Inr Docerb Material Of Construction: Stainless Steel Choppers (Y/N): N Vacuum Internal (Y/N): N Jacket (Y/N): N

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 732027.1, overall weight: 122 kg, Nominal point diameter: 8mm Die depth: 1mm Dimension X: 0.60mm Dimension X min.: 0.5mm Dimension X max.: 0.65 Max. Pressing force: 55kN Min. air pressure: 0.3 MPa Max. Air pressure: 0.6 MPa Total stroke: 85mm Power stroke: 7mm Crsdpfsu Tut Ujx Akcsb The clinching pliers from Tox Pressotechnik are specially designed for use in robotic systems and offer a reliable and precise solution for joining materials. It was developed for seamless integration into automated production processes and is characterized by its robust design and durability. The pliers ensure consistently high-quality results and support efficient production. Its versatility makes it the ideal choice for a wide range of industrial applications where precision and reliability are crucial.

Condition: used, Year of construction: 2017, machine/vehicle number: LC623, Used Thermoforming Packing water cup line - 11500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete cup filling and packaging solution engineered for beverage production in water applications. The centerpiece is the TR-ALP 10 cup form-fill-seal machine, designed to thermoform, fill, seal, and cut PET cups with high efficiency. With a 5x2 format (10 cavities per cycle) and a working capacity of 17–20 cycles/min, the system achieves up to 12,000 cups/hour, ideal for second hand industrial packaging lines seeking reliable output. The integrated end-of-line equipment includes a robot cartoner, a case erector, a case sealer, and conveyors for smooth downstream handling.Production speed: up to 12,000 cups/hour (10,200–12,000 cups/hour typical)Cycle rate: 17–20 cycles/minCavity configuration: 5x2 (10 cavities per cycle)Punch size: 71 x 71 mmSupported cup formats: 100 ml and 200 mlBase material: PET film, 500–700 micronLid materials: Aluminum 40 µm or 12 µm / APET + 12 µm / HSL heat-sealable, peelableProduct contact parts: Stainless steel AISI 316Maximum film width: 390 mm (base), 375 mm (upper)Reel diameters: lower 800 mm, upper 300 mmMain machine weight: approx. 2,500 kgCase sealer model: GEM F470Case erector model: F2000Advanced Automation & Control SystemsThe line features robust automation for consistent cup forming, accurate dosing, and reliable sealing. The TR-ALP 10 employs a time-controlled gravimetric dosing system with 10 control valves for uniform fill volumes. Electrical architecture is industrial-grade with clear protection ratings and safety circuitry.Power supply: 3 x 380 V ACInstalled power: 25 kWCurrent: 40 AFrequency: 50 HzControl voltage: 24 V DCDosing system: time-controlled gravimetric, 10 valvesFilling temperature: 15–25 °CSafety hardware: integrated emergency and safety switching (industrial components)Production Line Integration CapabilitiesEngineered for seamless industrial packaging, the line integrates cup production with end-of-line case handling. A vacuum pick-and-place robot cartoner manages multiple cup sizes, with packing recipes for both 100 ml and 200 ml formats. Automatic case erecting, sealing, and three conveyors enable inline or modular operation in diverse layouts.End-of-line: robot cartoner, case erector F2000, case sealer GEM F470, conveyorsPacking configuration: 30 cups/carton (200 ml: 2 layers 15x2; 100 ml: 3 layers)Format flexibility: 100 ml and 200 ml tooling setsContainers: PET cups; secondary packaging in cartonsMachine Condition & Maint... Credpsy Icp Dsfx Akceb

Condition: used, Year of construction: 2021, operating hours: 274 h, machine/vehicle number: R86, Used Terta Pak A3Flex 600V 500SlimTechnical Specifications & Performance DataThis aseptic carton filling machine is engineered for high-efficiency beverage production and industrial packaging environments. Manufactured by Tetra Pak, the A3 Flex platform is widely recognized for its reliability and consistency in aseptic operations. Configured in the 600V variant and set up for the TBA 500 Slim format, it provides dependable throughput for second hand operations and integration into a used bottling line.Manufacturer: Tetra PakModel: A3 FlexConfiguration: 600V, TBA 500 SlimYear of manufacture: 2021Operating hours: 274 hProduction speed: up to 8,000 packs/hourFormat compatibility: 0.5L (500 Slim)Container types: Carton (aseptic)Drawing specification: 648575-0600Machine category: Aseptic filling machineAdvanced Automation & Control SystemsThe A3 Flex platform features integrated automation designed to support consistent aseptic performance and straightforward operation. The HMI provides real-time counters and process visibility; profiles such as TBA_500_Slim enable format-specific settings that help streamline operation. The control architecture supports recipe-based adjustments and guided workflows to maintain process stability.Operator-friendly HMI with counters and production monitoringRecipe/profile management for configured format (TBA 500 Slim)PLC-based controls with diagnostics and alarmsSafety interlocks and guarded access in critical areasDesigned for efficient changeovers within the configured format scopeProduction Line Integration CapabilitiesThis aseptic filling machine integrates smoothly into complete packaging lines and can operate as a standalone unit in industrial packaging environments. It is suitable for beverage production requiring aseptic carton handling and complements upstream packaging material supply and downstream conveying and end-of-line equipment.Inline or standalone operation for flexible plant layoutsInterfaces with upstream packaging material handling and sterilization systemsCompatible with downstream conveyors, case packing, and palletizing solutionsConfigured for 0.5L Slim cartons; additional formats may be supported with appropriate kitsMachine Condition & Maintenance HistoryThe unit is second hand and ready for operation. With only 274 operating hours and a 2021 build year, it presents low wear for its age class. Visual counters confirm the recorded operating time. The machine is positioned for rapid recommissioning in a professional beverage packaging setting.Year 2021, low operating hours (274 h)Second hand equipment, ready for operationCommercial-grade aseptic design suitable for continuous dutyOperational Performance & VersatilityDesigned for aseptic carton packaging, this filler delivers consistent forming, filling, and sealing per... Crsdpfxsy Icpws Akcjb

Condition: used, Year of construction: 2006, operating hours: 68,702 h, machine/vehicle number: LC624, Used KRONES water bottling line - 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-efficiency PET bottle handling and beverage production. Manufactured by Krones in 2006, it delivers reliable performance for industrial packaging operations at scale. The line integrates blow molding, filling, labeling, coding, shrink wrapping, handle application, palletizing, and pallet labeling, creating a robust end-to-end production solution suitable for second hand markets seeking dependable uptime and consistent output quality.Production speed: up to 32,000 bottles per hourBottle formats: Compatible with 0.5L and 1.5L bottle formatsContainers: Designed for PET bottle handlingManufacturer (core equipment): KronesYear of manufacture (core line): 2006Operating hours recorded: 68702Control platform: Siemens PLCsFilling control: Electronically controlled with flow switches (volumetric)Key models and modules:Krones Contiform S20 blow molder (2006)Krones Volumetic filler (2006)Krones capper (2006)Krones Checkmat bottle inspector (2006)Krones SynCo bottle conveyor system (2006)Krones Etima labeling machine (2006)Markem Smart Lase C350 laser coder (2015)Ocme Vega N70/2 shrink wrapperComag/Decimo HM 100/2 handle applicator (2006)Ocme Pegasus M400 palletizer (2006)Bema Silkworn Turbo pallet stretch wrapper (2006)Eidos 7P6ERLP pallet labeler (2020)M. Tanner AG/Prologic preform hopper (2018)M. Tanner AG preform unscrambler (2006)Gassner cap hopper (2006)Cryotech International nitrogen doserEuropool pack conveyorAdvanced Automation & Control SystemsThe line is equipped with Siemens PLC-based automation for coordinated control across blow molding, filling, labeling, and end-of-line operations. The filler uses electronically controlled flow switches to ensure accurate volumetric dosing and consistent fill levels at high speeds. Centralized controls, synchronized conveyors, and integrated inspection enhance efficiency while minimizing downtime and changeover complexity.Siemens PLC architecture across the production lineVolumetric filling with electronic flow controlIntegrated inspection via Krones CheckmatCoordinated conveyor logic with Krones SynCoLaser coding by Markem Smart Lase C350Production Line Integration CapabilitiesThis production line integrates seamlessly from preform handling through pallet labeling. The Krones SynCo and Europool conveyor systems ensure smooth transfers between modules, while the shrink wrapper, handle applicator, palletizer, stretch wrapper, and pallet labeler complete a fully automated packaging and logistics flow.Inline operation from blow molder to pallet labelerFormat compatibility: 0.5L and 1.5L PET... Crsdpfsy Icpqsx Akcjb

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect... Crsdpfx Akjw Imp Hjceb

Condition: used, Year of construction: 1999, machine/vehicle number: M271, Used Filling Monoblock FIMER 20/20/3/3 up to 4500 bph This Monoblock efficiently processes still liquids, such as water and wine. Notably, FIMER manufactured this machine in 1999, ensuring an operational capacity of up to 4500 bottles per hour (BPH) for bottling 0.75-liter glass containers. Additionally, this unit currently remains in storage, ready for immediate use. Credpfxovgvd Hs Akceb Monoblock Structure and Rotation This machine operates with a clockwise rotation, which allows it to move containers smoothly and continuously through each treatment station. Consequently, this rotational design synchronizes the rinsing, filling, and capping cycles precisely, which helps to maximize productivity and minimize bottling interruptions. As a result, the machine maintains efficient workflow throughout the process. Technical Data and Electrical Specifications This unit connects to a 380 V power supply and operates with 6.5 kW of power at a frequency of 50 Hz. Therefore, these specifications match most industrial networks, providing ample power for each bottling stage. Rinsing Station With 20 grippers in the rinsing station, the machine treats each bottle with a single rinse to prepare it for filling. Given this setup, the Monoblock can rinse containers quickly and effectively, removing any residues and thus readying them for the filling phase. Filling Station in the Used Filling Monoblock FIMER 20/20/3/3 up to 4500 bph In the filling section, the machine uses 20 fixed valves with a gravity or light vacuum system, ensuring that it fills each bottle evenly. Moreover, this design maintains speed and precision, achieving a steady output of up to 4500 BPH. Consequently, this filling method suits still products like water and wine, preserving their properties and, equally important, preventing turbulence. Capping Station The capping station is equipped with three heads for aluminum screw caps and three for straight cork stoppers. In this way, the machine can accommodate different closure types, including 31×18 mm caps. Therefore, this versatility ensures tight, protective seals on containers after filling. Safety Features of the Used Filling Monoblock FIMER 20/20/3/3 up to 4500 bph Finally, this Monoblock includes advanced safety systems, which protect both operators and containers throughout use. Furthermore, these safety features provide additional reliability, ensuring the machine’s consistent functionality.

Condition: excellent (used), -Dimensions: 430x730x1565 mm -With pump -Hourly output: 40 L Cedjwxu Sljpfx Akcorb -Flavor: 1 -Voltage: 380 V / 50 Hz -Power: 1.6 kW -Condenser: air or water -Manufacture date: 17/7/2002 -Quality 828 -Serial number: IC 5879 -Software version: AESMD 36 -Net weight: 200 kg

Condition: used, Belt sanding machine BÜRKLE BSU 2500/800 - used - Sanding belt cover, Extraction fan ----- Technical data ----- Table size: 2,500 x 800 mm, Motor: 5.5 kW, Sanding belt dimensions (LxW): 7,200 mm Credoxlt Ebjpfx Akceb

Condition: used, Slot mortising machine SAMCO AS 16 - used - Movable motor, Dowel drilling device ----- Technical data ----- Worktable dimensions: 550 x 285 mm, Drilling width: 190 mm, Drilling depth: 120 mm, Speed: 2,840 rpm, Motor: 1.5 kW, Weight: 220 kg Cedpfxjw Nv Nxs Akcjrb

Condition: excellent (used), Belt grinding machine HOLZKRAFT LBSM 2505 - used - Grinding belt cover, Right-/left-hand rotation, Swiveling grinding unit ----- Technical data ----- Table size: 2,400 x 800 mm, Throat depth: 650 mm, Motor: 3 kW, Grinding belt dimensions (LxW): 150 x 6,400 mm Quality information: - Belt tracking checked - Grinding shoe checked Credpfjyfwcrex Akceb - Height adjustment checked - Grinding table guide checked - Complete basic cleaning performed - Electrical system checked - Immediately ready for operation

Condition: used, Thickness planer SAC RS/530 - used - Segmented pressure beam, electric height adjustment, under-table roller, separate feed motor ----- Technical Data ----- Planing width: 530 mm, Number of knives: 4 units, Passage height: 240 mm, Feed speed: 7 / 14 m/min, Csdpfx Ajw I T N Hskcerb Extraction port Ø: 140 mm, Motor: 4 kW, Weight: 840 kg