Used Unwind Rewind for sale (483)

Condition: excellent (used), functionality: fully functional, Segment I – Unwinder with stabilizing table The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. Itjdpfx Ajwck U Roh Nsb • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 4785, product width (max.): 300 mm, working width: 290 mm, roll width: 290 mm, type of input current: three-phase, overall weight: 11,000 kg, total height: 2,200 mm, total length: 10,200 mm, total width: 2,000 mm, Equipment: documentation/manual, URGENT SALE: Nilpeter B 3000 - High Quality Flexographic Printing Machine! We sell the Nilpeter B 3000, a reliable and efficient flexographic printing machine that is perfect for fast production of labels, packaging and flexible materials. This machine offers precise printing, easy management and high speed, making it ideal for printers, packaging companies or small businesses. The B 3000 is known for its durability and high-quality manufacturing capabilities, with options for a variety of colors and materials. Condition: very ood Key benefits: Fast and efficient,easy to maintain, low maintenance costs and easy replacement of parts. Flexible use: Supports a variety of materials, from plastic to paper. Urgent opportunity: Need to sell quickly due to business change - first offer accepted! Price: EUR 9,999 – we are negotiating for a quick purchase! Contact: For more information, pictures or a trial run, please contact. Location: Zemun, Serbia Why now? This machine is an investment opportunity - don't miss out! Get in touch urgently and step into more efficient production. Don’t miss out on this opportunity!1× NILPETER B-3000, year: 1994, 6 x UV letterpress + UV drying, 1 x UV flexo + UV/ 3 x rotary cutting station, 1 x unwinding station, 1 x rewinding station, 1 x rewinding station, 5 x automatic control for magnet processing, 1 x corona print, electronic control of cylinder registers, plenty of print and magnetic cylinders and spare parts. Ijdsv Rpc Rjpfx Ah Nstb • Max. Web Width: 300mm,min web width 110mm, • Spare uv box for screen station, Command unit for the uv station plenty of rubber rollers for uv unit... • Operating instructions and electrical diagrams in English

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 00071 / 00072, Manufacturer: Screen Model: Truepress Jet 520 HD+ Location: Inowrocław, Poland Year of manufacture: 2017 Serial numbers: 00071 / 00072 Counter (as of 19.11.2025): ● Total Paper: 8,203,874 ● Mono: 7,893,536 ● Color: 1,434,640 Technology Printhead: Piezo single-pass DOD Ink: - Truepress SC inks for Truepress Jet 520HD - CMYK (standard), spot color - 10 kg tanks Paper transport: Pinless, tight web, automatic tension control Paper feed: Hunkeler Unwinder Paper take-up: Hunkeler Rewinder Cleaning system: Hunkeler Colors: CMYK & K Printing resolution & speed: - 1200x1200 dpi, 50 m/min - 1200x600 dpi, 75 m/min - 600x600 dpi, 120 m/min RIP: - EQUIOS 3.40.63.04 software Paper Print width: 150 to 508 mm (6"–20") Paper width: 165 to 520 mm (6.5"–20.4") Paper weight: 40 to 250 gsm Media types: Preprinted, inkjet, laser, and recycled newsprint, uncoated paper, coated paper Core diameter: 70–76 mm (2.75"–3") Environmental conditions Temperature: 18 to 24°C (64.4 to 75.2°F) (no sudden temperature fluctuations) Humidity: 40 to 60% (no condensation) Physical data Equipment dimensions (W x D x H): 13,815 mm (543.9 in.) x 2,478 mm (97.6 in.) x 2,195 mm (86.5 in.) Installation dimensions (W x D): 16,814 mm (662.0 in.) x 4,135 mm (162.8 in.) Power requirements Printer: - Controller: Three phase 200–240 V, 30 A / 380–415 V, 20 A - Heater: Three phase 200–240 V, 110 A / 380–415 V, 55 A - Controller PC: Single phase 100–240 V, 2 A Delivery terms: self-collection Guarantee: The machine is complete and fully operational. Itedpfxetzag Ee Ah Njb Possibility to provide operational demonstration videos.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Automatic rewinder for foam. A machine designed for winding elastic materials such as PUR foam, polyester foam, latex. It consists of an unwinding unit and a winding unit. The machine has been adapted to wind a foam roll from a cut foam block. Wound foam rolls are used in different industries such as mattress manufacturing, footwear, and clothing production, among others. The machine is fully automated. It allows you to wind a specified number of running meters per roll. The number of meters depends on the thickness of the material. Thanks to special dispensers, the machine precisely handles winding a set number of meters of any flexible material (such as PUR foam). Maximum roll width is 220 cm. Diameter of the finished roll is approx. 100 cm. The material is wound onto a 63 mm diameter cardboard core. Machine dimensions: 650x350x165 cm. Power: 2 kW. Very low noise level, around 69 dB. Itjdpfsx Dkinsx Ah Nsb For those interested, please contact us. The machine is in very good condition with very few operating hours.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Year of manufacture: 2022 - Counter: Like new, approx. 3,000 meters total output! Technical Specifications: - Resolution: 1200 x 1200 dpi x 8 bit - 1200 x 3600 dpi equivalent - Maximum web width: 330 mm - Maximum print image size: 1195 x 320 mm - Maximum print image width: 320 mm - Web control: Integrated web guiding system (BST) at the unwinder - Functionality for connecting optional finishing equipment - Feeding speed (printing speed): 18.9 m/min, 13.5 m/min, 9.45 m/min Iedoxgifaepfx Ah Notb - Speed depends on paper type: Standard speed 13.5 m/min - Machine dimensions (L x W x H): 3869 x 1138 x 1480 mm - Machine weight: 947 kg - 2 x BST systems, one for unwinding and one for rewinding - Condition: Regularly serviced and well maintained (showroom system) Includes: Printer housing, internal Konica Minolta IC-605B controller, unwinder and rewinder. Price on request! Sale/rental exclusively within Germany! Unfortunately, we regret to inform you that we do not conduct sales outside of Germany. We kindly ask for your understanding in this matter and request that you refrain from making further inquiries regarding this issue.

Condition: good (used), Year of construction: 1990, SANJO P 25S - 6C Age: 1990 Web-width: 270mm 6-color Flexo 1 x Varnish Unit Unwind Rewind Lot of printing cylinders, aniloxes are coming with the machine Itedpogvg A Sofx Ah Njb DELAM RELAM Located: Printingshop/Germany

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Isdpfxjvakdzo Ah Njtb Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table BST web edge control Vacuum station (2x) - Servo drive - Adjustable web width Die cutting station - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder Iodpeu Iucuefx Ah Njtb - Separate servo drive in each case - Friction shafts - Cutting table for web fixing - Separate display S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system

Year of construction: 2011, condition: like new (used),  Year of manufacture: 2011  Servo drive  Job memory up to 50 jobs  Register control: Semi- and fully rotary  electronic motor control  Electronic web edge control  Waste and misprint stop  Unwind shaft: d=76mm  Unwind diameter: 700mm  Rewind shaft: d=76mm  Rewind diameter: 550mm  Automatic web stop at machine stop  Flexo printing unit GALLUS EM 340  Web width: 340mmm  Cliché 1.14mm  Fully rotary register control including servo drive  Die-cutting and printing of materials  UV drying  Web width: 410mm Ijdspyg Tbjpfx Ah Njtb  Laminating  Pressure station mounted on printing cylinder  Punching unit LeoMat L  Adaptation of the GALLUS R250 magnetic cylinder  Rotometrics impression cylinder  Grid rewind servo driven  Integrated edge trim suction  Including fully rotative register control

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Itsdpfsxz Ewnex Ah Njb

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Itodpfoxzug Ssx Ah Njb Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Condition: excellent (used), Stations/Equipment: Unwinder Rewinder Extraction system incl. shredder (4x Lundberg Type WT200-200U - year 2018) Inert enclosure Busbar laminating unit Cutting units Ijdpfx Ajxzufhsh Notb Laminating units / adhesive application units Heated rollers Master computer Control cabinets Drive motors Gantry crane Corona treatment

Condition: good (used), Year of construction: 2019, DOMINO N610i | DIGITAL UV INKJET LABEL PRESS (up to 7 colors including high-opacity white) • High-resolution digital UV inkjet system for professional label production • Supports up to 7 colors (CMYK + White + White) • 600 dpi native resolution with 4 grey levels (nominal 1,340 dpi) • Print speeds up to 75 m/min • Wide range of compatible substrates: paper, PET, PP, PE • Designed for industrial, household, personal care, automotive, chemical, pharmaceutical, food, and beverage applications • Short setup times and consistent print quality • Durable Domino construction and global service support _____ 2. MACHINE DATA Specification Details Manufacturer DOMINO Model N610i Technology UV Inkjet Year of Manufacture September 2018 First Installation February 2019 Operating Hours 6,110 hrs (as of November 2025) Installed Colors CMYK + White + White (6 channels active) Print Resolution 600 dpi native incl. 4 grey levels (nominal 1,340 dpi) Printing Speed Up to 75 m/min Web Width Up to 340 mm Print Width Up to 333 mm Printheads 18 Kyocera Micro-Piezo printheads (4 replaced in 2025) Ink Type UV-curable inks Drying System Integrated UV curing units Substrate Compatibility Paper, PET, PP, PE Digital Front-End ESKO RIP Version 2.2 Unwind Unit Max. 1,000 mm Ø Rewind Unit Max. 1,000 mm Ø Machine Dimensions W 570 cm • D 200 cm • H 180 cm Ink Cabinet Dimensions W 120 cm • D 52 cm • H 81 cm Production Status Machine currently in operation Availability Estimated end of February 2026 _____ 3. INCLUDED COMPONENTS • Domino N610i print engine with 18 Kyocera Micro-Piezo printheads • UV curing system • Unwind unit (Ø 1,000 mm) • Rewind unit (Ø 1,000 mm) • Vetaphone corona treatment module • Web guiding module • Web cleaning system • Anti-static control system • Digital front-end with ESKO RIP v2.2 • Color management system • Remote diagnostics & support capabilities • Ink cabinet • Complete operator workstation • All components supplied in 'AS IS' running condition Iodpfx Ahsxzr Ime Njtb

Condition: used, Year of construction: 2014, TECHNICAL DATA: Type: 5-color digital UV inkjet press with separate white printing unit Length: 4550 mm Width: 1750 mm Height: 2200 mm Weight: 3000 kg Connected load: 39 kW / 60 A Power supply: 400 V, 3-phase, 50 Hz Auxiliary power: 230 V, 50 Hz (chiller) Compressed air consumption: 100 NL/min Required cooling capacity: 18 kW (60,000 BTU/h) Data interfaces: USB 2.0, Ethernet COOLING UNIT (RECOLD RE-C 160 INERT) Cooling capacity: 16,000 W Refrigerant type: R134a Refrigerant charge: 4.5 kg Power consumption: 8.5 kW Max. current: 15 A PRINTING TECHNOLOGY: Process: Piezo DOD Printheads: Xaar 1001 Resolution: 720 × 360 dpi UV DRYING SYSTEM: UV lamps: • 1× Hönle UV GOZ, 7.2 kW • 1× Hönle UV FOZ, 7.2 kW Pinning: LED pinning after print units 1 and 5 Exhaust: Integrated lamp cooling and odor reduction INERT GAS CURING SYSTEM: Type: Oxygen-reduced curing unit Gas consumption: < 6 m³/h WEB AND PRINT PARAMETERS: Process: Roll-to-roll Web width: 350 mm Print width: 330 mm Repeat length: 10–1000 mm Register accuracy: ± 50 µm Print tolerance: • Single distance: ± 0.2 mm • Cumulative per meter: ± 1.5 mm Speed: • 4-color mode: up to 48 m/min • With white ink: up to 30 m/min • Adjustable speed range: 18–48 m/min WEB TREATMENT AND HANDLING: Corona station: 1500 VA Web cleaning: Polymer roller LC 350 Antistatic units: 3 pieces Edge guiding: Before print module Roll diameter (unwind/rewind): max. 610 mm Roll weight (unwind/rewind): max. 120 kg Shafts: Pneumatic expanding shafts, 76 mm core Splice table: Integrated slitting and splicing table SUPPORTED SUBSTRATES: • Coated and uncoated paper • PP, PE, PVC, POPP (white or transparent) • Aluminum foil (coated or uncoated) • PET films • Acrylic coatings • CN-based primers • PET-based primers • Hybrid dispersion primers INK SYSTEM: Ink type: UV-curable, low migration Food & pharma compliance: Indirect contact Free monomers: < 10 ppb Ink laydown: 8.2 g/m² at 100% area coverage Cartridge change: Possible during operation Empty cartridge signal: Optical or acoustic PRINTHEAD MAINTENANCE: Ink recirculation system: Enclosed design Automatic daily cleaning: Suction cleaning before operation Manual cleaning: Lint-free cloth SOFTWARE: • RIP software: Esko Artwork • ICC profile management • Supported data formats: PDF-X1, PDF-X3, EPS, AI • Internal storage for designs Itjdpfx Ahsxzrvds Neb • Unlimited substrate recipe storage • Touchscreen operator panel CONTROL AND SAFETY: • UV lamp overheat and operational monitoring • Machine interlock in event of UV system failure • Ink level warning system • Emergency stop

Condition: used, Year of construction: 2006, Configuration: • Unwinder • Teknek web cleaner • Corona treatment • 6 flexo print stations Itedjxzq T Uepfx Ah Njb • 6 × IST UV dryers • Cold foil module • Cold foil unwind/rewind • Lamination module • Laminate unwinder • Die-cutting section with 3 stations • EL camera system • Rewinder Tooling included: • Print cylinders + magnetic cylinder + varnish roller: o Sizes: Z87, Z96, Z110, Z132, Z140 o 5 print cylinders of each size o 1 varnish cylinder for print station 6 • 16 anilox rollers Additional information: • End of 2024: full revision of the printing units and related tools completed.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, • Model: SIAT L33 150 TC • Machine in very good condition, completely overhauled in 2022. • Machine type: Semi-automatic, three-color flexographic printing press • Color printing: Up to 3 colors • Web width: 150 mm • Printing width: 150 mm • Suitable for: PVC, OPP, Acrylic OPP, cellophane, paper, and reinforced films • Applications: Primarily for printing on self-adhesive tapes • Central impression drum: Heated, with ceramic drums • Rewind: Automatic rewind turrets with automatic coupling of printed tape to empty cores • Corona treatment: Yes • Slitting: By razor blades • Drying: 3 hot air drying tunnels • Speed control: Up to 160 m/min, adjustable via inverter • Maximum roll diameter (unwind): 360 mm • Maximum roll diameter (rewind): 300 mm • Unwinder shaft diameter: 3 inches Iedpfx Ajxznwkoh Netb

Condition: as good as new (ex-display), Year of construction: 2024, Introduction JTFM-1100 fully automatic vertical Roll to Roll lamination machine is designed for waterbased glue and thermal Roll to Roll lamination multi-functions. It is our latest product, features high automation, high laminating speed, high accuracy, electrical appliance is centralized by programmable system, touch screen easy to operate. It can realize the whole line automation of unwinding, lamination and winding. Configuration & Functions: 1. Automatic High Speed Unwinder: Adopt shaftless clamping, hydraulic lifting structure, tension controlled by air brake automatically/manually. Standard Max. Unwinding diameter up to 1500mm. 2. High Accuracy Edge/Line Correction System: Equipped with Ultrasonic Edge Correction Sensor and upmarket Edge/line Position Controller, Photoelectric Tracking/ Stroke ±75mm, which can keep the edge of roller aligned when unwinding and winding. 3. Automatic Shutdown Protection System: Equipped with photoelectrically controlled automatic shutdown protection devices, in case of paper shortage, paper broken and paper jammed. 4. Drying And Heating System:The 800mm diameter large heating roller equipped with Electromagnetic Heating Device, at the same time supported with Hot Air Cycle System, can realize high speed booting and heating in 5~10 minutes, 2 times than traditional oil heating device meanwhile save much power consumption. 5. Automatic Hydraulic System: The hydraulic system automatically Itodpoxqrp Asfx Ah Neb provides stable and large pressure to ensure high quality of lamination. Ruian Aote Packaging Machinery Co., Ltd. 6. Man-machine Interface System:Equipped with 10 inch color touch screen, easy and convenient to operate. The operator can view the machine's working status at any time from the touch screen. 7. Air Shaft and Tension Control System:Adopt air shaft, easy to load film, and paper roll, accurate position by the graduation of the air shaft. At the same time the intelligent tention system easy to control the tention of film and paper, increase laminating performance. 8. Rewinding System: AC vector frequency conversion control, matched with unwinding system, the paper roll lift is driven by double hydro-cylinder with torque adjustment system. Mirror pressing roller ensures that the paper roll is rewound tightly. Standard Max. Unwinding diameter up to 1500mm. Parameter: Model JTFM-1100 Max.Paper Width 1080mm Max.Unwinding Diameter 1500mm Max.Rewinding Diameter 1500mm Recommended Paper Thickness 100-500gsm Recommended Film Thickness 8~35 micron Max. Laminating Speed 100m/min Voltage 380V 50HZ Total Power 75KW Working Power 20~35KW Regular Lamination Pressure 5~15Mpa Regular Coating Glue Amount 3~8g/m^2 Dimension (L*W*H) 9000×3230×2600mm Total Weight 8500 KG

Condition: used, Functions:  - - Application of several self-adhesive labels Capacity: approx. 900 to 1800 bottles/hour Weight: approx. 300 kg Power: 220 / 380 V 3-phase + 0 + earth Suitable bottles:  Cylindrical or slightly conical (option) bottles diam. 55 to 115 mm Labeling:  Maximum height of the upper edge of the label: 170 mm (220 mm in option) Labels:  Outer diameter rolls: 300 mm Itjdpfxsxy Sq Sj Ah Neb Inner diameter of rolls: 75 mm Unwinding: Left forward Inner rewind

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, overall weight: 2,000 kg, total length: 4,000 mm, total width: 3,000 mm, total height: 1,500 mm, Slitter Rewinder, can be used with a contact roller rewinding system or as a standard non-contact rewinder, depending on the substrate and required web tension. - In use until 2000, then comprehensively modernized - Modified electrical control equipment with Siemens S7 PLC - Modified winding drives with Commander SE CT control, both individually adjustable - Reversible drive direction for winding drives - Working width 650 mm with BST edge guiding, 700 mm without BST edge guiding - BST edge guiding with pneumatic detection - Max. rewind diameter 500 mm; 2 pcs. 3" rewind shafts - Max. unwind diameter 1000 mm; 1 pc. 3" unwind shaft - Pneumatically controlled unwind brake - Slitting system: circular knives (3 units available) - Running metre counter Hengstler - Main drive, electrically adjustable speed - Machine speed 150 m/min (200 m/min) - Display of winding tension in % - Software file for Siemens S7 PLC available - Parameter file for drive control available - Power supply 3 x 400 VAC / 25 A / 3P+N+GND Itsdpexbyf Hefx Ah Nsb - Compressed air 6 bar - Suitable for paper, film, aluminium etc. - Required space at least 4 x 3 m - Machine is dismantled and ready for shipment - Sale as seen - Packaging: • on wooden pallets - Delivery: EXW Switzerland CH-9008 St. Gallen - Dimensions of unwinder (without slitting unit): • Width: 170 cm • Length: 220 cm • Height: 110 cm • Weight: 490 kg - Dimensions of slitting unit (without unwinder): • Width: 230 cm • Length: 140 cm • Height: 140 cm • Weight: 1490 kg - Control panel (including accessories): • Width: 70 cm • Length: 120 cm • Height: 120 cm • Weight: 240 kg

Condition: used, Year of construction: 2008, functionality: fully functional, Due to the downsizing of a business division, we are selling our continuous printing duplex line. The package includes two OCE VarioStream 7450 printers. A total of approximately 108,000,000 pages have been printed on both printers. Two Hunkeler unwinders and rewinders, a deflection bridge, and various spare parts are also included. All components can be purchased individually. Dismantling is possible from December 2025. The printing line has been regularly powered on and tested. Iodpfx Ajxx N R Hsh Notb Sales prices: - 2 unwinders/2 rewinders, Hunkeler (RW4, UW4), years 1999–2005: €1,700 per unit - 2 continuous printers, OCE VarioStream 7450 for simplex or duplex printing, year 2008: €16,500 per unit; both printers incl. duplex channel – €30,000 - Duplex channel separately: €1,500 - Various spare parts: €1,500 (1x developer, 5x toner, corotron wires, cleaning brushes, drums, etc.) - Complete package (2 unwinders, 2 rewinders, 2 printers, spare parts, duplex channel): €37,500 We are also offering 2 Xerox X700i: Xerox X700i-1 Year of manufacture: 2012 Number of black and white prints: 2,393,574 Number of colour prints: 6,644,456 Total prints: 9,038,030 Price: €1,750 Xerox X700i-2 Year of manufacture: 2016 Number of black and white prints: 2,884,598 Number of colour prints: 2,574,056 Total prints: 5,458,654 Price: €2,250 All prices are negotiable!

Condition: good (used), Year of construction: 2010, Printing & Drying • 8 × flexographic print units • GEW UV lamps installed on all sections • Chilled impression drums (visible in photos) _____ Converting & Finishing • Kocher & Beck GapMaster die-cutting system • Delam / Relam unit with compensator • Foiling / combo unit • Matrix section & rewinding path visible in the line _____ Web Handling Itodpfxexxa Rdj Ah Nob • Unwinder • Rewinder • Web guide • Tension control • Various rollers and carriers • Touchscreen main control (Siemens panel) • Operator panels at each station _____

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Capability to cut and separate into individual pieces Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Touch screen Iedpfxoxw Uqvs Ah Notb TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Roll width: 40–340 mm Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Cutting accuracy: 0.2 mm Supported file formats: PLT Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Condition: used, Year of construction: 2008, machine/vehicle number: VS8750, Printer CANON OCE Variostream 8750 with Prisma server (not in use - it is an old version) SRA4 Controller; IPDS; TCP/IP Prisma Server for Oce Printer VS 8750 (Prisma server HP Proliant ML-370-G4. Can operate two printer sets. Two duplex equals four simplex). Isdjvu Rimjpfx Ah Njtb MRM Standard (240/300 dpi or automatic 600 dpi resolution) WT4 Cross Turning Unit Printer 1 SN 88.136 Counter: 576,660,937 – Developer station replaced at 421,061,210 Printer 2 SN 88.137 Counter: 790,048,906 – Developer station replaced at 638,027,916 Year of manufacture: 25.09.2008 I-Configuration (printers) Type: C-Twin Fully operational. Additional: single CANON OCE Variostream 8750 – incomplete, for spare parts only. Included with the printing line are the following parts (may be less, as the machine is in ongoing use): - Developer KK01-D15 – 1 pcs - Corotron S29312-F645 – 2 packs (8 pcs/pack) - Cleaning Brush S29312-F1440 – 2 pcs - Fine Filter S26312-F1071 – 2 pcs - Fuser Oil S26312-F646 – 2 pcs - Heating Lamp S29312-F1488 – 2 pcs - Toner KK01-D25 – 6 packs (3 pcs/pack) - Drum S29312-F1463-V2 – 2 pcs - Bushing 2002025921 – 2 pcs - Pressure Roller (hard) S29312-F1270 – 1 pcs Included: Hunkeler Unwinder UW6 – S/N: UW6 7183.00835-01/08; year 2013 Hunkeler Rewinder RW6 – S/N: RW6 7182.00432-01/31; year 2013

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 253, cutting width (max.): 1,600 mm, overall weight: 3,000 kg, working width: 1,600 mm, space requirement length: 3,700 mm, space requirement width: 2,500 mm, Equipment: safety light barrier, Thanks to the turret rewinding technology, the machine can be unloaded and reloaded while it is rewinding. This results in extremely high daily output, for example with plotter rolls. The machine comes with 3-inch and 2-inch winding shafts. The unwinding station can accommodate master rolls up to 1000 mm in diameter with 3-inch and/or 6-inch cores. The unwinding brake is sensor-controlled, and a splicing table allows for loss-free and stable web splicing during roll changes. Supplied blade holders: 5 units. We will dismantle the machine and load it onto two pallets. The buyer’s staff can be present during dismantling and a few days prior for training on the machine. Itodpfsxvrcmex Ah Nob

Condition: good (used), Year of construction: 2008, OMET FLEXY S330 Year of Manufacture: 2008 _____ Technical Specifications: - Number of Colors: 8 - Web Width: 350 mm - Print Width: 330 mm - Drying System: o UV drying on all stations o 3 additional hot air dryers Unwinder: Single Rewinder: Double _____ Additional features: - 3 Corona Treaters - 1 turn bar - Material thickness: Min. 50 μm, Max. 350 μm Itjdpfx Aju St R Ejh Nsb - 1 Turn Bar for cold foil lamination - 2 Cutting Stations - 1 Laminating Unit for varnishing and self-adhesive lamination - Coldfoil - Camera Inspection _____