Used Tylarc 303 for sale (425)

Condition: used, Differential pressure sensor -Type: QBM66.203 -for air and non-aggressive gases -output signal proportional to the pressure difference Cpsdpfx Aceb Hw Dpo Nou Technical specifications: -Output signal: 0...10 V DC -2 measuring ranges: 0...1500 Pa or -0..3000 Pa -Operating voltage: 24 V AC or -13.5...33 V DC -Power consumption: 0.5 VA -Connection: 3-wire -Protection class: IP42 -Weight 0.2 kg

Condition: used, Cylindrical roller bearings Codpfx Ajb A Imqoc Nspu -Type: 30313 -Price: per piece -Number: 3x available -Weight: 2.4 kg

Condition: used, Centrifugal pump, high pressure pump, water pump -Max. Delivery rate: 2.0 m³/h -Dimensions: 360/140/H340 mm Csdpfxsdz Drpe Ac Nspu -Weight: 11 kg

Condition: excellent (used), axle configuration: 3 axles, first registration: 09/2021, loading space length: 8,250 mm, loading space width: 2,480 mm, total length: 10,850 mm, total width: 2,550 mm, suspension: air, tire size: 245/70-R17.5, wheelbase: 5,910 mm, Year of construction: 2021, = Further Options and Accessories = - Stake pockets = Notes = Very nice 2021 FLOOR AXD.330 3-axle trailer with ABS/EBS, SAF axles (3x 10,000 kg) with drum brakes, hot-dip galvanized, 2nd axle is a lift axle, aluminium drop sides (60 cm high), hardwood floor, floor height: 90 cm, various stake pockets + 4 stanchions and lashing eyes, towing eye (40 mm) adjustable by 60 cm, 2x raise/lower valve, unladen weight: 6,210 kg, max. gross weight: 30,000 kg, 245/70-R17.5 tyres (L: 7/8 mm, 4/4 mm, 4/1 mm; R: 7/7 mm, 3/3 mm, 3/2 mm), Dutch registration. = Further Information = Axle configuration Tyre size: 245/70-R17.5 Axle brand: SAF DRUM Brakes: drum brakes Suspension: air suspension Front axle: twin tyres; Max. axle load: 10,000 kg; steered; left tyre tread inside: 50%; left tyre tread outside: 45%; right tyre tread inside: 45%; right tyre tread outside: 45% Rear axle 1: twin tyres; lift axle; max. axle load: 10,000 kg; left tyre tread inside: 25%; left tyre tread outside: 25%; right tyre tread inside: 20%; right tyre tread outside: 20% Rear axle 2: twin tyres; max. axle load: 10,000 kg; left tyre tread inside: 10%; left tyre tread outside: 25%; right tyre tread inside: 20%; right tyre tread outside: 20% Cjdpfsx U Ed Rjx Ac Nopu Weights Unladen weight: 6,210 kg Payload: 23,790 kg Gross vehicle weight: 30,000 kg Functional Body manufacturer: FLOOR AXD.330 Extendable body: Yes Condition Technical condition: very good Visual condition: very good Identification Registration number: 75-WBN-9 Further information Please contact Arne Honingh for further details.

Condition: used, cooling capacity: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, immersion depth: 460 mm, Spandau Pump SKF Lubrication Systems Germany GmbH Submersible centrifugal pump, submersible pump, coolant submersible pump, centrifugal pump unit TYPE PSL0303GBS460N05BA Immersion depth: 460 mm 400 V 50Hz Delta connection 5.5 kW IE2 The coolant pump was used on a Hoffmann filter system of a Kapp grinding machine. Cedsw Rvhdepfx Ac Nspu Price / details on request All technical data subject to typographical error / change. We sell exclusively to countries within the European Union.

Condition: new, Year of construction: 2026, laser type: fiber laser, laser power: 3,000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: - Independent metals - Aluminium - Stainless steel - Carbon steel SOURCE POWER 3000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. LASER SOURCE The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. INTERCHANGEABLE WORKTABLE The interchangeable work table located at the rear of the machine reduces laser downtime to a maximum. Automatic table replacement takes just 10 seconds. This gives the operator time to take the cut parts from the table and load a new sheet while the laser is working on the other table. This system ensures a very high production flow. AUTOMATIC LUBRICATION SYSTEM Cpjdpfxex Tn S Ie Ac Neu To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Cedpov Hxbbofx Ac Njpu

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 320 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Installation height: 650 mm Throat depth: 450 mm Clear distance between uprights: 2,555 mm Machine length: 3,785 mm Machine width: 2,290 mm Width without support arms: 1,740 mm Overall height: 3,100 mm Table height: 920 mm Motor power: 22 kW Oil tank: 300 l Machine weight: 14,450 kg (Data may vary depending on equipment configuration.) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust, double-guided backgauge - Backgauge fingers double-guided on linear rails - Movable front support arms with height adjustment - Side and rear safety covers - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Foot pedal with emergency stop Csdpfx Acouf Nr Aj Nspu - 380 V, 50-60 Hz, 3 phases - LED lighting Additional equipment: - Delem DA 66t CNC control - R-axis backgauge CNC-controlled - CNC-controlled crowning - Fiessler Akas 2M laser safety device - 2 additional backgauge fingers (4 in total) - 1 set of upper and lower tools Further bending lengths and capacities available with appropriate accessories!

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, operating hours: 39,500 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF Trumatic L 3030 - 4 kw - Year 2001 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2001 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC one 39,500 h (10.08.2024) Machine regularly serviced by TRUMPF! STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - DIAS 3 height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, Cpsdpfxoulqrlj Ac Nsu monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Codpeuthz Tjfx Ac Nepu Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 30,000 h, laser power: 3,200 W, sheet thickness steel (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, AVAILABLE FOR A SHORT TERM: TRUMPF TruLaser 3030 – 3.2 kW – Year 2007 with RotoLas! TECHNICAL DATA: Make: TRUMPF Type: TruLaser L 3030 – 3.2 kW Year of manufacture: 2007 Working area: 3,000 x 1,500 x 115 mm Control system: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness mild steel: 20 mm Max. sheet thickness stainless steel: 12 mm Max. sheet thickness aluminum: 8 mm Operating hours: NC on 30,000 h (Oct. 2024) Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: TLF 2000 CO2 laser with high-frequency excitation, maintenance-free turbo radial blower, Reflector telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Maintenance-free three-phase servo motors - Cutting head quick-change device Cjdpfxou Afcbe Ac Nepu - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS High-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - PMS plasma sensors - Automatic sheet metal edge detection - Programmable power cycles - Microweld - Automatic shutdown - Workspace lighting - Sinumerik 840D control system: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - ToPs 100 lite workshop programming - Safety: multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TruFlow 3200 laser including lens monitoring sensors - PCS Process Control System - Preparation for LiftMaster - RotoLas pipe cutting system for cutting pipes and profiles

Condition: good (used), Stick electrodes 3.25 x 350 -Type: CP 33033 -Analysis: 0.1C-18Cr-8Ni-6Mn remainder Fe. Cjdpfx Aofcvf Ujc Nspu -Price: per package -Number: 4 packages available -Weight per package: 5.2 kg

Condition: new, Year of construction: 2025, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Cpedpfx Acei D Daqs Neu Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 32 mm Distance from spindle to base 340–1125 mm Distance from spindle axis to column surface 330–890 mm Spindle extension 215 mm Spindle taper MK4 Spindle speed 75–1200 rpm Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed (3) 0.10; 0.16; 0.25mm/turn Horizontal plane rotation angle 180° Main motor power 2.2 kW Worktable dimensions 500×330×294 mm Machine dimensions 1400×660×2100 mm Weight 950 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Incl. parabolic suspension / spare wheel / full-width ramp / lockable coupling head / spiral cable Technical data: • Brand: Ifor Williams • Model: GX105 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: none • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 303 x 157 x 30 cm • External dimensions (LxWxH): 502 x 209 x 162 cm • Loading height (floor): 38 cm • Permissible total weight: 3,500 kg • Unladen weight: 664 kg • Payload: 2,836 kg • Chassis: Low loader (wheels beside the platform) • Tyres: 155/70R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced side panels, covered with tread plate and walkable • 24 mm anti-slip, waterproof phenolic plywood floor • Extremely robust, fully welded tubular steel frame • Frame fully hot-dip galvanised in immersion bath • 2 individual ramps (skids), standing on shaft, 120 cm high • Ultra-low chassis for minimal loading angle • Excavator bucket rest at the front • Spare wheel mounted under excavator bucket rest • 6 lashing rings mounted in the sideboard • 4 foldable lashing eyes (plate anchors) mounted in the floor • KNOTT leaf spring axles for maximum heavy-duty use • Automatic reverse mechanism • KNOTT overrun hitch and parking brake • Lockable coupling head • Very robust, bolted, reinforced V-drawbar • 13-pin plug • Removable plug cable from front wall • Reversing light • Large-dimensioned safety lighting • Integrated rear fog lamp • Recessed lighting in the rear frame • Heavy-duty centre support wheel Optional equipment – available on request: Various accessories can be retrofitted to this trailer as shown in the pictures, e.g.: - 4 foldable lashing eyes (plate anchors) mounted in the floor New vehicle with warranty and TÜV. Cpedox S Ri Tepfx Ac Nsu - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be shipped in advance or export plates (Germany) can be provided - Export plates incl. customs clearance possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately! We have been specialist dealers & repair workshops for over 30 years for brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more. - Errors, mistakes, and prior sale excepted -

Condition: new, Year of construction: 2025, Chip extractor ASA 4303 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 215 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Input power 3,8 kW Csdpjhk S Slsfx Ac Nspu Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 2,4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Negative pressure max. 2000 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 23,295 h, control type: CNC control, The original invoice for the machine; it was purchased in 2022 for 225,000 euros and has hardly been used. CO2 Laser Cutting System Manufacturer: TRUMPF Model: TruLaser 3030 Lean Edition L 20 Year of manufacture: 2012 / overhauled in 2023 Operating hours: 23,295 / Working hours: 7,181 Codpfx Asx Sxwxec Njpu Power: 3,200 Watt Max. material thickness Steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Max. feed rate: 140 m/min Positioning accuracy: 0.1 mm Length: 6,500 mm Width: 7,600 mm Height: 2,200 mm Weight: 12,000 kg

Condition: new, Including parabolic suspension / spare wheel / full-width ramp / lockable coupling head / spiral cable Technical specifications: • Brand: Ifor Williams • Model: GX105 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: None • Roadworthiness certificate (TÜV): 2 years from first registration • Internal dimensions (LxWxH): 303 x 157 x 30 cm • External dimensions (LxWxH): 511 x 209 x 167 cm • Load bed height: 43 cm Cpsdox Srtgspfx Ac Neu • Gross vehicle weight rating: 2,700 kg • Unladen weight: 700 kg • Payload: 2,000 kg • Chassis: Low loader (wheels beside the bed) • Tyres: 165R13C • Suspension system: KNOTT parabolic suspension • Jockey wheel: Yes • 100 km/h approval: No DESCRIPTION • Reinforced side panels with aluminium tread plate, walkable • 24mm slip-resistant, waterproof phenolic plywood floor • Extremely robust welded tubular steel frame • Entire frame hot-dip galvanised • Continuous 120cm steel mesh ramp with support • Heavy-duty spindle-type ramp locks, rattle-free • Assisted lift for tailgate • Very low chassis for a shallow loading angle • Front excavator bucket rest • Spare wheel mounted under the excavator bucket rest • 6 lashing eyes mounted laterally in the sideboard • KNOTT leaf spring axles, designed for heavy-duty use • Automatic reverse • KNOTT overrun brake system and parking brake • Lockable coupling head • Reinforced, bolted V-drawbar • 13-pin plug • Removable lead from front wall • Reversing light • Large-format safety lighting • Integrated rear fog light • Rear frame lighting flush-mounted • Heavy-duty centrally mounted jockey wheel Optional accessories – on request: Various accessories can be retrofitted to this trailer, e.g., as shown in the photos: - 4 folding lashing rings (mounting plates) installed in the floor New vehicle with warranty and roadworthiness certificate. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance, or temporary export registration plates (Germany) can be provided. - Export plates including customs clearance available Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been specialist dealers & service workshops for over 30 years for all major brands: Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberté, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix, and many more. - Errors, omissions, and prior sale excepted -

Year of construction: 1983, condition: used, Well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition. Cpodpfx Aegg Sbnec Nsu

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 100 h, machine/vehicle number: 7363126775, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Very good condition Cpsdex R Ed Nepfx Ac Nsu

Condition: used, machine/vehicle number: WDB9634031L735030, mileage: 391,403 km, power: 221 kW (300.48 HP), first registration: 04/2013, fuel type: diesel, tire size: 315/70, tire condition: 40 %, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2013, Tyre size: 315/70 Tyre profile: 40% Front axle: Steering Rear axle: Double wheels Cpodpfx Ajx Ry D Dsc Nsu

Condition: ready for operation (used), Fanuc A06B-0063-B303 AC servomotor SN: C228F35DE with Pulsecoder 860-2020-T301 Cpodpfx Aox Nlrwjc Nou

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: A0220A0572, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens Simunerik, laser type: CO₂ laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, workpiece weight (max.): 710 kg, input voltage: 400 V, input frequency: 50 Hz, overall weight: 11,500 kg, total length: 9,300 mm, total width: 4,600 mm, total height: 2,600 mm, year of last overhaul: 2023, Equipment: CE marking, documentation/manual, All services and overhauls carried out directly by the manufacturer (Trumpf). Inspection possible at any time. Assembly plan included. The machine was dismantled and stored with the assistance and supervision of Trumpf. Support with assembly and commissioning is also available upon request. Machine assembly plan attached to the documentation. The machine is being delivered including LIFTMASTER type LMZ3050 0556817 / 256417 / 9000 N load capacity / year of manufacture 2003. See details in the photos. Including loading and unloading cart Including longitudinal and transverse conveyor belts for small parts/waste Including safety barrier fencing The machine comes with a large spare parts inventory (price obtained from Trumpf: purchase value EUR 42,000.00). See list in the attachment. Loading and transport of the machine was carried out by SCHWERLAST Austria (costs within Austria approx. EUR 6,000.00). Csdsx Rt Ddspfx Ac Nspu

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 30-39 mm -Type designation: not available -Dimensions total Ø 180 x 75 mm -Weight: 5.9 kg Cpodpfxowvp A Ts Ac Nsu

Condition: excellent (used), Mitsubishi Industry 6-Axis Articulated Arm Robot Here we offer Mitsubishi industrial 6 axis articulated arm robot. RV-Series Industrial Robots Cpodpegkg Eusfx Ac Nsu Compact and powerful flexible automation and high reliability. The RV-Series offers a highly dynamic 6-axis jointed-arm robot for maximum quality. Type: RV-3SDB-S15 Number of axes 6 Maximum lifting force 3.5 kg Reach radius 642 mm Weight 38Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Kuka Robot Here we offer you a Kuka robot. (as good as new/unused) Kuka Robot KR 60L30-3 arm length: 1220 mm axes number: 6 Weight 665kg Axis / Axis 1 (A1) ± 150˚ : 128˚/s Axis / Axis 2 (A2) +75˚/--105˚ : 102˚/s Axis / Axis 3 (A3) +158˚/--120˚ : 128˚/s Axis / Axis 4 (A4) ±350˚ : 260˚/s Axis / Axis 5 (A5) ±119˚ : 245˚/s Axis / Axis 6 (A6) ±350˚ : 322˚/s With sealed software Cpodopuhiiopfx Ac Nou Rated payload: 30kg Control system KRC4 Type: KR 60 L30-3 Scope of delivery: (See pictures) Further questions we can answer on the phone for you. Written order possible by email or fax