Used Tuschieren Press for sale (27,076)

Condition: new, Year of construction: 2025, drop-through hole in table: 140 mm, table width: 590 mm, table length: 800 mm, stroke adjustment: 100 mm, pressing force: 60 t, ram bore: 40 mm, power: 5.5 kW (7.48 HP), punching force: 60 t, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 60 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for serial production. Key advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement through centralized automatic lubrication - Production-ready operation with PLC control + dual hand/foot control Areas of application: - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-way guided slide • Spheroidal cast connecting rod and gear housings • Crankshaft and drive shafts in 4140 tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual coil safety valve • Manually adjustable stroke • Finger/hand protection safety system with light curtain • PLC control system • Dual hand/foot control system • Mechanical locking system • Emergency reverse motor function • Conforms to occupational safety regulations • Compatible with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch screen LCD display (standard for 150–300 tons) • Hydraulic locking system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder and straightener • One custom die set as requested • 8-point slide guide ✅ TECHNICAL SPECIFICATIONS (60 TON) Capacity: 60 Ton Throat depth: 260 mm Table-to-ram distance: 360 mm Slide-to-table distance: 395 mm Distance between uprights: 380 mm Ram adjustment (stroke adjustment): 70 mm Approx. press width: 1340 mm Approx. press depth: 1450 mm Approx. press height: 2200 mm Front anchor dimension: 630 mm Side anchor dimension: 875 mm Table hole diameter: Ø150 mm Prodpovtx D Nsfx Affof Table size: 520×720 mm Die mounting slot diameter: Ø40 mm Ram size: 340×220 mm Table height from floor: 730 mm Stroke adjustment: 0–95 mm Strokes per minute: 50 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2750 kg Note: Please contact us if you need modifications to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: good (used), Year of construction: 1969, Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press, press machine, hydraulic punch for Schüco tools, hydraulic press, multifunctional punch, punch, universal punch, punching machine -Handover: in the current condition as viewed -Condition: Cylinder slightly leaky -Hydraulic press: Hydraulic single-column press -Pressing force: 160 tons -Stroke: 600 mm -Insertion height: 800 mm -Table size: 660 x 800 mm -Table hole: Ø 250 mm Prodpfx Afow A Rzdofof -Projection: 330 mm -Operation: hand lever -Dimensions: 1780/1090/H2920 mm -Weight: 8000 kg

Condition: new, Year of construction: 2025, operating hours: 8 h, Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors Prjdexfwdjpfx Affjf + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, L 5990 mm, W 2500 mm, H 2700 mm. Weight 4451 kg Psdpfxsvkn Iro Affjrf

Year of construction: 1986, condition: excellent (used), We are offering this very well-maintained Elkom U6s thermo vacuum press, year of manufacture 1986. Psdpfxox N Na Ee Affsrf Manufacturer: Elkom Model: U6s Year of manufacture: 1986 Condition: Very good Machine type: Thermo vacuum press If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2002, pressing force: 880 t, lifting height: 305 mm, SLIDE .. total force (nominal): 880 to .. stroke: 305 mm .. cutting velocity min.: 5 mm/s .. cutting velocity max.: 70 mm/s .. closing velocity: 200 mm/s .. returning velocity: 200 mm/s V-RING .. nominal force: 400 to .. stroke: 40 mm Pjdjx Nd Udepfx Afferf COUNTER RAM .. nominal force: 200 to .. stroke: 40 mm TOOL DIMENSIONS .. lower table (left-right): 1010 mm .. lower table (front-back): 1600 mm .. upper table (left-right): 1000 mm .. upper table (front-back): 1000 mm .. shut height max.: 460 mm STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 450 mm .. sheet thickness max.: 16 mm .. feeding step min.: 1 mm .. feeding step max.: 999.9 mm .. sheet length min: 3950 mm .. speed max.: 48 m/min .. Vertical adjustment: 140 mm .. nominal force: 60 kN ELECTRICAL SPECIFICATIONS .. total power consumption: 188 kW .. main drive power: 160 kW ATTACHMENTS -FINEBLANKING PRESS- .. autom. tool clamping device: yes .. closed cabin: yes .. decoiler: no .. leveller unit: no .. waste cutter: yes

Condition: new, Year of construction: 2025, throat depth: 175 mm, table width: 375 mm, table length: 570 mm, stroke adjustment: 60 mm, pressing force: 25 t, An eccentric press is a type of mechanical press driven by a force generated through an eccentric mechanism, used in cold forming operations such as punching, shearing, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 25 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suited for mass production. Key advantages: - Stable stroke performance and high repeatability in series production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready usage with PLC control + dual hand/foot operation Areas of use: - Cold shearing and punching operations - Cold blanking applications - Metal die forming - High-volume production lines STANDARD FEATURES Prsdpfx Afoxg R Ucjfsf • Steel fabricated body • Four-sided guided ram • Spheroidal cast iron connecting rod and gearboxes • Crankshaft and transmission shafts made of 4140 normalized steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot operation system • Mechanical safety system • Emergency reverse motor function • Conforms to occupational safety regulations • Meets CE standards OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One die set customized to requirements • Eight-sided slide guidance TECHNICAL SPECIFICATIONS (25 TON) Capacity: 25 Ton Throat depth: 175 mm Bed-to-ram distance: 300 mm Slide-to-table distance: 310 mm Distance between uprights: 290 mm Ram adjustment (stroke regulation): 50 mm Approx. press width: 870 mm Approx. press depth: 1380 mm Approx. press height: 1870 mm Front anchorage dimension: 490 mm Side anchorage dimension: 670 mm Table hole diameter: Ø145 mm Table size: 375×570 mm Die mounting slot diameter: Ø35 mm Ram size: 260×170 mm Floor to table height: 710 mm Stroke adjustment: 10–60 mm Strokes per minute: 120 spm Motor power: 3 kW Motor speed: 1000 rpm Approx. weight: 1300 kg Note: Please inform us if you require any modifications to the technical specifications. PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: good (used), Hydraulic press, workshop press, two-column press, oil hydraulic press -Hydraulic press: pressing force 102 t -Stroke: 220 mm -Operation: Hand lever -Hydraulic unit: VEM 5.5 kW / 325 bar -Clamping table: 1050 x 670 mm -Insertion height: 295 to 1130 mm, lockable in 8 stages via cable pull Podsxwucxepfx Affsrf -Dimensions: 1820/950/H2580 mm -Weight: 2500 kg

Condition: new, Year of construction: 2025, Good, used demonstration machine Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) Pedjd Nm Siopfx Afferf * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: used, Dimensions: L 6990 mm, W 2500 mm, H 2720 mm. Weight 4191 kg. Tipping device for 140-660 l containers Prsdsvkn Nvjpfx Affjf

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Podjvviytepfx Affsrf Storage location: Nattheim

Condition: used, Year of construction: 1994, pressing force: 200 t, table length: 1,780 mm, PRESS DESIGN .. drive system: eccentric / crank .. frame design: H-frame, tie rod .. openings in uprights: yes .. table cushion: yes .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 200 to PRESS TABLE .. table surface (left-right): 1780 mm .. table surface (front-back): 1300 mm .. opening in bed (left-right): 1445 mm .. opening in bed (front-back): 260 mm SLIDE .. slide force: 200 to .. table surface (left-right): 1500 mm .. table surface (front-back): 1100 mm .. stroke: 178 mm .. stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 150 mm .. stroke rate (min.): 20 /min .. stroke rate (max.): 120 /min DIE CUSHION (TABLE CUSHION) .. number of cushions: 11 .. cushion force: 3 to TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 542 mm .. passline opening (free passage in side columns): 900 mm DECOILER .. design: twin reel .. sheet width max.: 260 mm .. coil weight max.: 2 to .. max. diameter of coil: 1500 mm Psdpfxex Nd T Ts Afforf .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm LEVELLER UNIT .. sheet width max.: 250 mm .. sheet thickness max.: 2 mm .. sheet thickness min.: 0.3 mm .. number of leveller rolls: 19 .. diameter of leveller rolls: 18 mm .. feed velocity min.: 5 m/min .. feed velocity max.: 60 m/min .. loop controls: yes STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 250 mm TRANSFER SYSTEM .. distance between tools, stroke X max.: 260 mm .. distance between tools, stroke X min.: 60 mm .. stroke Y fix: 55 mm .. Inner width clamping rails closed max.: 455 mm .. Inner width clamping rails closed min.: 205 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. strip feeder: yes .. gripper transfer system: yes + Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data sheet available)

Condition: new, Year of construction: 2025, drop-through hole in table: 140 mm, table width: 440 mm, table length: 700 mm, stroke adjustment: 80 mm, pressing force: 40 t, ram bore: 35 mm, power: 4 kW (5.44 HP), punching force: 40 t, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for series production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Ready-to-use operation with PLC control + dual-hand/pedal control Areas of Use: - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Four-sided slideway guide • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made from 4140 alloyed steel Pjdpfx Afjvtx Axefjrf • Central system fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Double solenoid safety valve • Manually adjustable stroke • Finger-hand protection safety system with light curtain • PLC control system • Dual-hand/pedal operation system • Mechanical lock system • Emergency reverse motor function • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic protection system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die made to required specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (40 TON) Capacity: 40 Ton Throat depth: 220 mm Table–ram distance: 340 mm Distance between uprights: 330 mm Ram adjustment: 60 mm Approx. press width: 1050 mm Approx. press depth: 1280 mm Approx. press height: 2100 mm Front anchorage size: 575 mm Side anchorage size: 740 mm Table hole diameter: Ø150 mm Table size: 440×630 mm Die clamp slot diameter: Ø40 mm Ram size: 290×180 mm Floor-to-table height: 720 mm Stroke adjustment: 10-70 mm Strokes per minute: 55 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2100 kg Note: Please notify us if you require any modifications to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sale, commissioning, and aftersales processes are handled by CRONOSSTECH.

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, rotary mandrel press, rack and pinion press, workshop press, hand lever press, table press, shoemaker's press -Spindle press: Rotary mandrel press. Rack and pinion press, heavy-duty construction Predpfox Ngyiex Affjf -Type: GA4 -Stroke: 45 mm -Protrusion: approx. 125 mm -Height: max 215 mm -Dimensions: 385/280/H620 mm -Weight: 51.4 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, Briquetting press for wood or wood-like materials Throughput: up to a maximum of 100 kg/h Briquette: 60 mm cylindrical Motor: 7.5 kW Dimensions: approx. 2150 x 1700 x 1400 mm Container size: 1400 x 1400 x 920 mm Pjdpow Hpizofx Affjrf Optional: Extraction system available as a hopper attachment. Requirements: Input material should ideally be shorter than 25 mm chip length Moisture content: 6-12% (oven-dry basis) Machine suitable for intermittent operation. For example, up to 2.5 hours briquetting; 1 hour pause, etc. If the machine is to operate continuously for longer than 2.5 hours at a time, an optional cooling system must be connected.

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm TONNAGE: 60 ton THROAT DEPTH: 410 mm Prjdpfx Afjxn U Rqofjf DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Prjdevvkmbspfx Affjf Storage location: Nattheim

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, rotary mandrel press, rack and pinion press, workshop press, hand lever press, table press -Manufacturer: F. Schröpel, rotary mandrel press. Rack and pinion press, heavy-duty construction -Protrusion: 125 mm -Height: max 225 mm Prjdpjx Ngvqefx Affsf -Dimensions: 280/115/H365 mm -Weight: 20 kg

Condition: new, Year of construction: 2025, operating hours: 9 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pjdpogl Nlmjfx Affjrf Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Year of construction: 2000, condition: ready for operation (used), - USED - 4-AXIS CNC PRESS BRAKE AXIS: R - X - Y2 - Y1 BENDING LENGTH: 4050 mm TONNAGE: 165 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 3100 mm OPEN HEIGHT: 450 mm UPPER BEAM TRAVEL: 250 mm Prsdpfxskh Uqls Affef APPROACH SPEED: 100 mm/sec RETURN SPEED: 100 mm/sec WORKING SPEED: 9 mm/sec MOTOR POWER: 15 kW CONTROL UNIT: ESA KVARA WEIGHT: 14000 Kg OVERALL DIMENSIONS: 4500 x 1750 x 3000 mm NOTE: WITH No1 4000 MM NEW UPPER PUNCH, No 1 835 MM NEW UPPER PUNCH, No 1 4000 MM NEW BOTTOM DIE WITH 75 MM V-TYPE ; No 1 835 MM NEW BOTTOM DIE WITH 80 MM V-TYPE

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Prodpevvkl Dofx Affsf Storage location: Nattheim

Condition: good (used), trolley -Simple bucket Pedpfx Afsb A H U Sofjrf -Flat press -2x shelves for microfiber mops

Year of construction: 1999, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm Pjdsrk Sg Rspfx Afforf TONNAGE: 165 ton THROAT DEPTH: 450 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm OPEN HEIGHT: 440 mm UPPER BEAM TRAVEL: 250 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 120 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 18,5 kW CONTROL UNIT: DELEM DA 65 WEIGHT: 12020 Kg OVERALL DIMENSIONS: 4100 x 1880 x 2920 mm NOTE: No 2 FRONT SUPPORT BRACKETS; BOTTOM HYDRAULIC TOOL LOCKING

Year of construction: 2003, condition: ready for operation (used), - USED - 7-AXIS SYNCHRONIZED CNC PRESS BRAKE    AXIS: Y1 - Y2 - X - X1 - R - Z1 - Z2 BENDING LENGTH: 3150 mm TONNAGE: 70 ton THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 2640 mm OPEN HEIGHT: 450 mm APPROACH SPEED: 160 mm/sec RETURN SPEED: 160 mm/sec Psdpfxerk Shco Affsrf WORKING SPEED: 0-10 mm/sec MOTOR POWER: 15 kW CONTROL UNIT: ESA KVARA WEIGHT: 7800 Kg OVERALL DIMENSIONS: 3400 x 2100 x 2650 mm

Year of construction: 2010, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3200 mm TONNAGE: 100 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 2550 mm OPEN HEIGHT: 600 mm UPPER BEAM TRAVEL: 400 mm X-AXIS TRAVEL: 800 mm R-AXIS TRAVEL: 150 mm Prjdpfxstq Ngbe Affef APPROACH SPEED: 200 mm/sec RETURN SPEED: 180 mm/sec WORKING SPEED: 10 mm/sec MOTOR POWER: 11 kW CONTROL UNIT: ESA 875 PLUS WEIGHT: 10500 Kg OVERALL DIMENSIONS: 4300 x 2000 x 3100 mm NOTE: MACHINE EQUIPPED WITH NEW CNC ESA