Used Turning Rolls for sale (13,150)

Condition: excellent (used), Machine in very good condition. It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Hu3Nhjg Parts conveyor, chips conveyor, bar feeder available. Spindels bore 42 mm IRCO feeder bar All manuals and documentation available Pjdpfxevllbro Adnjgw

Condition: used, Year of construction: 2002, - Siemens 840D Sinumerik control system - Driven tools - 12 tool positions - Drag frame magazine 20 places - chip conveyor - Coolant system - Year of construction 2002 Technical data: Psdpfx Asrbltpjdnsgw - Rotation Ø: 235 mm - Z-axis (vertical): 250 mm - X-axis (horizontal): 450 mm + 370 mm - Workpiece height: 100 mm - Ø in front bearing: 90 mm - Spindle head with short taper DIN 55026: A5 - Hollow shaft motor with oil circulation cooling: integrated in the headstock - Nominal power 100% ED: 29.3 kW - Nominal torque 100% ED: 200 Nm - Nominal speed: 1400 rpm - Maximum speed: 6500 rpm - Z-axis travel speed: max. 30 m/min - Traversing speed X-axis: max. 60 m/min Tool changer: - Number of switching positions: 16 - Permissible tangential torque (turret locked): 1300 Nm - Permissible mass moment of inertia of tool disk, tool holders and tools: 2.5 kgm² - Permissible unbalance (load torque) due to equipping with tool holders and tools: 32 Nm - Hydraulic operating pressure: 50 bar ± 10% - Weight of the turret: approx. 50 kg Dimensions - Dimensions WxHxD: 4400 x 2800 x 2600 mm - Machine weight: approx. 7000 kg

Condition: good (used), Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, chuck outer diameter: 250 mm, feed length X-axis: 680 mm, feed length Z-axis: 200 mm, power: 39 kW (53.03 HP), rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, controller manufacturer: Siemens, controller model: 840 DS, input voltage: 400 V, coolant supply: 6 bar, nominal power (apparent): 45 kVA, Equipment: rotational speed infinitely variable, type plate available, EMAG VERTICAL SINGLE-SPINDLE TURNING AND GRINDING CENTER EMAG - REINECKER VSC 250 DS Used, year of manufacture 2015 Control: Siemens 840 DS Condition: Used machine in good condition Operating hours (approx.): 35,000 Program run time (approx.): 22,000 hours Operating voltage: 400V Air connection: 6 bar Total power requirement: approx. 45 kVA Cooling unit: water/water Machine dimensions without peripherals (L x W x H): approx. 3200 x 1900 x 2650 mm CYLINDRICAL GRINDING Integrated motor grinding spindle with max. speed 45,000 rpm and max. output 18 kW Touch dressing for ceramic CBN grinding wheels Vertical CNC turning and grinding center Automation / Gantry: EKF basket stacker cell as raw/finished parts buffer for baskets 400 x 600 mm on floor rollers 3 basket stacks enable uninterrupted operation even during basket changes, loading/unloading via loading gantry The machine is well-maintained and EMAG serviced. The production process includes pre- and finish machining of the bore and end faces by hard turning the face surfaces, as well as turning the diameter/bore followed by bore grinding. No driven tools Viewing under power is possible by appointment. Dismantling and loading of the equipment are to be carried out by the buyer. Price and further details on request / special price Pgsdpfx Aolfduisdnew All technical details subject to error/typos. Sale only within EU countries.

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Pgedpfx Aexzq Ufsdnsw

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 53 / 50 mm Spindle motor power 7.5 / 10 kW Spindle bore 53 / 50 mm Number of axis 2 Movement X-Axis Rapid Traverse 10 m/min Z-Axis Rapid Traverse 10 m/min Pgodsxya Apjpfx Adnew Workpiece Workpiece drm over bed 400 mm This EMCO Emcomat E-200 was manufactured in 2016. A robust horizontal turning machine featuring a swing over bed of Ø 400 mm and a distance between centers of 1000 mm. It offers a spindle speed range of 50–4000 rpm with stepless speed control and a spindle bore diameter of Ø 80 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcomat E-200 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Pgsdexzq Ncepfx Adnsw Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: excellent (used), Year of construction: 2002, Machine in perfect condition. Pgodpfx Adergpv Tenew Can be inspected during production any time

Condition: used, Year of construction: 2022, - FANUC 0i-TF CNC Control - 60° slant bed - Cross slide with linear guides - Part separator - Coolant unit - Chip conveyor - Power on time: 2775 h - Machining time: 743 h - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar capacity diameter: 32 mm - Max. spindle speed: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Working area: - Workpiece diameter/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Tool holder (square): 12 x 12 mm Coolant system: Pgsdpfx Aowrp Dpsdnsw - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Power 100%/40% DC: 3.7 / 4.4 kW - Torque: 20.2 Nm - Energy consumption: 5.4 kWh - Total power: 8.8 kW - Operating voltage: 400 V - Rated current: 16 A Dimensions & weight: - Footprint: 1900 x 1030 mm - Weight: 1230 kg

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, turning length: 800 mm, turning diameter over cross slide: 500 mm, turning diameter: 400 mm, rotational speed (max.): 4,000 rpm, INDEX GU800 CNC Lathe with C-Axis, Driven Tools & Chip Conveyor Description: For sale is an INDEX GU800 CNC turning/milling machine with extensive equipment. The machine is in full working order, runs smoothly, and shows no errors. Equipment & Details: - Siemens Sinumerik control with color display - Turning spindle with C-axis for milling operations - Turret with 16 tool positions, including driven tools - Tailstock available - 2-speed spindle gearbox (manual belt change) - Tool holder VDI40 - Forkardt 250 mm chuck - Maximum swing diameter: 500 mm - Maximum turning length: 1000 mm - Spindle bore: 65 mm - LED interior lighting - Chip conveyor included - Documentation & programming manual available Condition: ✔️ Fully operational ✔️ Ready for immediate use Inspection & Collection: By appointment – the machine is currently connected and can be demonstrated in operation. Location: Pjdoxzqccepfx Adnjgw Wathlingen / Celle (Lower Saxony, Germany) ENQUIRIES BY EMAIL ONLY!!!

Condition: used, Year of construction: 2007, Mori Seiki NT5400/1800 SZ DCG CNC Twin Spindle Turn & Mill Machine with DMG Mori MSX-701 III CNC Control, Max Work Piece Swing 920mm, Max Turning Length 1921mm, Bar Work Capacity 107mm, Travels x 1 Mill Head 1040mm, Y Axis +/- 255mm, Z I Axis 1940mm, B Axis +/- 120 deg, X 2 267mm, Z 2 1830mm, Spindle Speed 2400rpm, Capto C8 Spindle Taper, Spindle Bore 120mm, Tool Head Spindle Speed 8000rpm, Tailstock Travel 1830mm, 10 Position Tool Turret, (2) x 450mm Powered 3 Jaw Chucks, High Pressure Coolant Filtration System, Clean Mist Oil Mist Extractor, Machine Weight 36000kg. S/No. NT540GE0032 (2007) Pgjdpsxzq R Hsfx Adnjw Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 6300 kg Control Unit Brand FANUC Model 18i-TB Main Drive Spindle speed range 3500 Spindle motor power 22000 W Movement X-Axis Movement 245 mm X-Axis Rapid Traverse 22 m/min Y-Axis Movement 102 mm Y-Axis Rapid Traverse 8 m/min Z-Axis Movement 1270 mm Z-Axis Rapid Traverse 24 m/min Additional Equipment Pgedpfx Adsxya Daensw Documentation/manual This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, turning length: 650 mm, turning diameter over cross slide: 350 mm, turning diameter: 385 mm, spindle speed (min.): 4,500 rpm, spindle bore: 67 mm, travel distance X-axis: 255 mm, travel distance Z-axis: 800 mm, For sale: Used DMG NEF400 V3, 5th Generation ISM 2-axis universal lathe with C-axis. Psdoxzqnrspfx Adnjgw Travel distances: X: 255mm Z: 800mm Swing over bed: 385mm Swing diameter: 350mm Turning length: 650mm Equipment: - Main spindle as integrated spindle motor - Max. spindle speed: 4,500 rpm - Drive power: 8.0/11.5 kW (100/40% duty cycle) - 12-position VDI30 disc-type turret with 6 driven positions - C-axis and spindle brake (hydraulic) - Automatic tailstock, MK4 mounting, travel: 680mm - CNC control Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate, and ShopTurn 3G - Operating system: Linux - Technology cycle for applying alternating spindle speeds for vibration-critical setups - Manual tool measurement device in work area - Hydraulic unit - Coolant spray gun - Mechanical oil mist separator - Reinforced coolant pump: 12 bar, 23 l/min - Chip conveyor with discharge height of 1,250mm, discharging to the right Bar machining package consisting of: - Workpiece pickup unit with left-side conveyor for parts up to max. 65mm diameter, 150mm length, and 3kg max. weight - Bar clamping device inner draw-tube diameter max.: 67mm - Interface for bar loader magazine - Foot switch for tailstock operation - Hydraulic 3-jaw chuck SMW-AUTOBLOK - RMS sensor (Relocation Machine Security) Machine available immediately! Machine ready for operation! Loading by us included! Transport can be arranged upon request!

Condition: used, NZX 1500/800SY is a CNC Turning-Milling-Drilling Center with high precision, accuracy and reliability. Capacities: 2 turning spindles, 2 revolvers, swing diameter over bed 800 mm, max. turning Ø 320 mm, max. bar Ø 52 mm; travels Z 810 mm, X 210 mm, Y 110 mm (both carriages). Specs: spindle speeds 0–6000 t/min, spindle power 22/18.5 kW, driven tools power 7.5/5.5 kW, spindle nose JIS A2-5, spindle hole 61 mm; rapid traverse X 30 m/min, Z 50 m/min, Y 20 m/min; weight ~8100 kg; overall dims L4396×W2835×H2320 mm. Accessories: direct measuring system X axis, lamp, coolant system, coolant through counter spindle, loader interface, parts catcher, workpiece conveyor, chip conveyor. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Pgodexx U Tmopfx Adnow

Condition: used, Year of construction: 2011, - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 bar feeder - Samchully MH-212 315 mm 3-jaw chuck - Samchully MH-206 175 mm 3-jaw chuck - Year of manufacture 2011 Technical specifications Capacity: - Swing over bed: 780 mm - Swing over carriage: 630 mm - Recommended turning diameter: 255 mm - Maximum turning diameter: 376 mm - Maximum turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed (belt type): 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing diameter: 140 mm - Spindle bore Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Counter spindle speed (integrated): 6000 rpm - Counter spindle nose: ASA A2-5 - Counter spindle bearing diameter (front): 90 mm Pedpsuxua Isfx Adnsgw - Counter spindle through hole diameter: 62 mm - Min. counter spindle indexing angle (C-axis): 0.001 ° Tool turret: - Number of tool stations: 12 - Tool outer diameter: 25 mm - Boring bar diameter: 50 mm - Indexing time (1st swivel time): 0.15 s - Spindle speed of the driven tools: 5000 rpm Feed rates: - X-axis: 260 (72+188) mm - Z-axis: 830 mm - Y-axis: 102 (± 51) mm - Rapid traverse X-axis: 30 m/min - Rapid traverse Z-axis: 30 m/min - Rapid traverse Y-axis: 10 m/min Motors: - Main spindle motor: 22 kW - Subspindle motor: 7.5 kW - Spindle for driven tools: 5.5 kW - Feed motors (X/Z/Y axes): 3.0 / 4.0 / 3.0 kW - Coolant pump: 0.4 kW Electrical connection: - Power supply: 54.55 kVA Dimensions: - Machine dimensions WxHxD: 3600 x 2163 x 1863 mm - Machine weight: 6450 kg Breuning bar loader: - Max. bar diameter: 5 - 100 mm - Max. bar length: 250 - 1250 mm - Table surface: 650/900 x 1250 mm - Guide channels: 10 / 20 mm - Motor power: 2.0 kW

Condition: good (used), Year of construction: 2019, operating hours: 8,173 h, functionality: fully functional, turning length: 12,025 mm, turning diameter: 480 mm, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, bar passage: 102 mm, overall weight: 7,200 kg, controller model: DMG MORI SLIMline Multi-Touch Control, control type: CNC control, CLX 550 V6 2-axis universal lathe with driven tools incl. C-axis, Y-axis, and counter spindle Standard equipment: 1. Ergonomic DMG MORI SLIMline operating panel 2. Main spindle A2-8 with AC motor, drive power 22 / 33 kW (100/40% DC), 3,250 rpm 3. Counter spindle A2-6 with ISM 52 synchro, drive power 13 / 14 kW, torque 171.5/192 Nm (100/40% DC), 5,000 rpm 4. 12-position servo turret, VDI 40 mounting with Trifix® precision interface and 12 driven tool stations per DIN 5480 5. Y-axis ± 60 mm 6. Chip tray 7. Hollow clamping device, max. bar capacity D 80 mm 8. Electronic handwheel Drive power (100%/40% DC) 22/33 kW Hydraulic clamping device with bar capacity diameter 102 mm, surcharge Differential pressure clamping for main spindle Bar package & interface option includes: - Workpiece unloader for parts up to D 80 x 200 mm long (D 100 x 200 mm with option C-B7000G) Max. workpiece weight 4 kg - Interface for bar loader or bar feed unit (DMG MORI standard interface) - Hinged belt chip conveyor instead of chip tray - 4-color signal tower Recommended additional option: Double cartridge filter for coolant, especially for production environments with very high chip volumes. Automatic workpiece ejector for counter spindle with internal coolant supply for clamping device flushing. Note: Option recommended for machines with workpiece unloader option. External flushing for counter spindle, option recommended for machines with automation Differential pressure clamping for counter spindle Tailstock function for counter spindle, mechatronic force control programmable in the software (force 250-600 daN), including foot switch (only for CLX 550 V6) Direct measuring system for X- and Y-axis (option only available for V4 and V6 versions) Manual tool measuring device in the working area, brand Marposs Documentation according to 'Technical Documentation Delivery List' – included in the machine price. Software option: DXF import for converting DXF files into NC programs (SIEMENS control) Tool monitoring system: Easy Tool Monitor 1.0, monitors each cutting operation against a set limit. Simple learning function for determining the monitoring limit per tool and cutting operation; manual adjustment/correction possible. Technology cycle: Alternating speed (turning) for vibration-sensitive applications Psdpfx Asxx Tcmjdnegw Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and professional installation – everything from a single source. Billing based on individual terms and duration. Contact us for your personal offer.

Condition: used, Year of construction: 2018, Mazak Integrex e-670H Mill/Turning Machine with Mazak Touch Screen Smooth CNC Control, Max Machining Diameter 1070mm, Max Machining Length 3,000mm, Spindle Speeds Max 10,000rpm, 80 Tool ATC, Capto C8 Spindle Taper, LBB Boring Bar System, SMW Autoblok Steady, Cromar Coolant Filtration System, Absolent A Mist Oil Mist Extractor, Kouwas Chiller Unit, Renishaw Probe System, Machine Weight 36,000kg. S/No. 285865 (2018) Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Pgodexzq N Njpfx Adnjw

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand MAZATROL Model Mazatrol SmoothG CNC Main Drive Number of spindles 2 Spindle speed range 5000 Movement Psdpfx Adoxya Aisnsgw X-Axis Movement 234 mm Y-Axis Movement 100 mm Z-Axis Movement 625 mm W-Axis Movement 585 mm Workpiece Workpiece drm 695 mm Turret Number of tool slots 12 This 4-axis Mazak QUICK TURN COMPACT 200 MSY L was manufactured in 2018. It features a maximum swing of 695 mm and a machining diameter of 380 mm. Equipped with a Mazatrol SmoothG CNC control system, it ensures precision and efficiency. The main spindle supports up to 5000 rpm, while the second spindle reaches 6000 rpm. A great opportunity to buy this Mazak QUICK TURN COMPACT 200 MSY L lathe. Contact us for further details. Application Types Turning

Condition: like new (used), Year of construction: 2011, operating hours: 9,080 h, functionality: fully functional, For sale: Well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approx. 9,000 operating hours! Travel axes X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and accessories: - Tool turret: 12 stations, all powered - Driven tool speed: Max. 10,000 rpm - Parts catcher - Electrical connection: 400 V - Power consumption: 37.6 KVA - Internal cooling: available - Main spindle chuck: Kitagawa BB210AB Pedpsxzqhrefx Adnogw - Sub-spindle chuck: Kitagawa B206A521F - Swing diameter: 366 mm - Turning length: 705 mm - Spindle bore: 80 mm - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Main spindle power: 18.5 kW - Sub-spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - Tool measurement system in the working area - Manually deployable measuring arm for sub-spindle - Short bar loader, manufacturer: LNS - Includes tools: 8 fixed tools, 3 driven tools - Includes extraction system, brand: Indusa - Includes complete documentation Machine available immediately! Machine has been fully cleaned and inspected! We will undertake loading of the machine! Transport can be organized upon request!

Condition: excellent (used), INDEX ABC 65 is an INDEX CNC Turning‑Milling‑Drilling Center designed for high precision, accuracy and reliability. Capacity: 2 turning spindles, 2 turrets; spindle bore 65 mm; spindle diameters 140/110 mm; travels Z300 X140 Y100 mm; turret positions 10/9 (back 8). Specs: main spindle stepless 0–6000 rpm, 25/35 kW, torque 80/120 Nm; back spindle 6000 rpm, 5/9 kW; driven tools 7.5/9 kW; tool shank 45 mm; indexing 0.4 s; rapids X30/Z50 m/min; power supply 3x400 V 50 Hz; installed power 41 kW; weight ~6500 kg; dims 3600×1280×1950 mm. Accessories: 300 l coolant, 80 bar high‑pressure, paper filter, lamp, collet device, USB, parts conveyor, chip conveyor, toolholder set. Achieves tight tolerances; ideal for automotive, watchmaking, aerospace, medical and toolmaking. Pedjxx U Svspfx Adnjgw

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Dear Sir or Madam the details of the Okuma Multus B400 with main and counter spindle tool magazine HSK 63 with 80 places 1500mm turning length main spindle passage 100mm CNC turning/milling center with CNC control OKUMA OSP P200L Enlarged main spindle Ø110mm Ø150/110mm, spindle nose size 11 Speed range 38-2800 1/min. Counter spindle as W-axis incl. hollow clamping device with Ø70mm bore in the draw tube helical interpolation also for thread milling Tool height correction in Y-axis for turning tools Extension kit "M "OSP P200L (Kit One-Touch IGF-M-D) Software multifunction tool for the use of special tools 80-station tool changer instead of 20 stations C-axis synchronization software for simultaneous control of both C-axes Increased speed 10,000 rpm for driven tools 20/14 kW, max. 85 Nm Interlit ISF 540/6670 slat-band chip conveyor with integrated coolant tank Interlit SPB4 gravity belt filter with 900 L clean tank Supply pump TH 90/690 FSI frequency-controlled pump for gravity belt filter SPB 4 Manual rinsing gun for attachment to additional coolant tank SPB4 SMW VNK 250/110 Power clamping cylinder for hollow sp. m. Bore Ø 110.5 mm Chuck Rota THW Plus 315-104 A11 Cylinder SMW VNK 250/110 2-stage clamping pressure for power clamping device Call by program Door automation Multus B 400 Open/close via M command two doors, both open simultaneously Chuck Rota THW Plu 315-104 A8 Cylinder SMW VNK 225/95 mounted. Pedpfx Adotdg Evsnegw Year of construction: 2011 Commissioning: June 2011 Warranty: A warranty for the used machine is excluded altogether. However, HAF Präzisionstechnik assures that defects, including hidden defects, are not known. Unknown defects can therefore not be excluded. Machine is under power and in very good condition. Viewing is possible by arrangement. We are also happy to process your acceptance parts in advance.

Year of construction: 2001, operating hours: 26,400 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 810 D powerline Additional Equipment Pjdpfsxya Dtox Adnsgw Thread pitches: Metric threads (longitudinal, flat, and tapered) mm 0.1-400 This BOEHRINGER VDF DUS 560 ti was manufactured in 2001. A robust horizontal turning machine, it's ideal for training purposes. If you are looking to get high quality turning capabilities consider the BOEHRINGER VDF DUS 560 ti machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Pgodpfx Adjxx U N Isnjw

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2200 mm Measurements depth 5000 mm Measurements height 2340 mm Machine weight 11700 kg Pjdexyayhspfx Adnogw Main Drive Spindle speed range 3500 Number of axis 5 Movement X-Axis Movement 255 mm Y-Axis Movement 100 mm Z-Axis Movement 800 mm Table Number of tslots 2x12 This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2008. It features a max turn diameter of 390mm, bar passage of 76mm, and a max working length of 700mm. Spindle speeds reach up to 3500 RPM with live tools at 4000 RPM. Ideal for complex turning tasks. Contact us for more information about this machine. Application Types Turning

Condition: used, TRAK / XYZ SLX 355 is a CNC turning lathe of high precision, engineered for superior accuracy and reliability. It features 2 axes, centre height 360 mm, distance between centres 1000 mm and centre height over slide 225 mm; spindle hole 52 mm; Z travel 1000 mm and X travel 190 mm. Rapid traverse Z 4 m/min, X 3 m/min; spindle speeds 50–1410 and 100–4000 rpm. Spindle nose D1-6 Camlock and Morse taper MK4. Delivers tight tolerances; suitable for automotive, aerospace, medical, watchmaking and machine tool applications. Pgjdpoxx U Dxsfx Adnsw

Condition: used, SCHAUBLIN 125 CCN is a CNC turning lathe of high precision, engineered for reliable machining with superior accuracy and repeatability. Working capacities: centre height 125 mm, distance between centres 500 mm, swing over cross-slide 115 mm, swing over bed 270 mm, spindle hole 28 mm; Z travel 400 mm, X travel 180 mm; spindle stroke 160 mm, spindle diameter 45 mm. Main specs: stepless spindle 0–5000 rpm, spindle power 7.5/5.5 kW, torque 58/42 Nm, Morse taper 3, feeds up to 5000 mm/min, rapid traverse 7.5 m/min; air 5–6 bar; 3x400 V 50 Hz; total power 15 kVA; weight ~1415 kg; dimensions 1700×1300×1700 mm. Accessories: 3-jaw chuck, soft/hard jaws, steady, set of collets, lamp, tailstock, coolant system, tool cabinet, steel holders, rinsing gun. Achieves tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace, medical. Pgjdpoxx Uzwofx Adnsw