Used Tungsten Carbide for sale (484)

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 25 - 80 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left - Cutting speed 25 - 80m/min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Dedpfx Asd Iip Toiwskl

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also Dkedpfxofg E Hpj Aiwsl “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 35 + 70 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control Dedpfsd Iip Ujx Aiwekl -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR

Condition: new, Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: AVB-HELIX100ST4, total length: 6,500 mm, total width: 2,600 mm, total height: 3,500 mm, height adjustment type: mechanical, overall weight: 16,000 kg, compressed air connection: 8 bar, shaft diameter: 260 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, infeed height: 800 mm, control cabinet width: 600 mm, control cabinet length: 2,200 mm, control cabinet height: 2,000 mm, working length: 3,000 mm, workpiece width (max.): 800 mm, empty load weight: 16,000 kg, workpiece length (max.): 3,000 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 3,000 rpm, FEATURES OF THE WOOD SHAVING MACHINES  Bin size: 3000 mm  Hopper is equipped with the Speed Control System  The robust machine frame structure of single-piece steel construction  Heavy body structure against vibration caused by long-term use of the machine  Conveyor extraction: 1000 mm wide outfeed provided with a rubber band or PVC 4 mm thickness  Direct motor operation with an independent control panel with a digital screen,  PLC-controlled electric panel independent from the machine, minimum 5-6 meters away from the machine,  Can be operated with 380V 50-60 Hz (additional transformers can be added for foreign countries operating at different voltages, optional)  Adjustable knife heights and cutter heads  Possibility to adjust shavings thickness between 0,4 and 1,2 mm(for straight blade models)  Blades and speed can be varied to produce Large Flakes (Equestrian), Small Flakes (Poultry Layers), Fine flakes (Poultry Broilers)  To avoid downtime, a few sets of spare blades should be ordered together with each machine.  Shavings outlet: Gravity discharge from the cutter heads to the belt conveyor  easy cutter head blade adjustment system;  All cutter head blocks are moved out on the machine during the blade changing.  We are also supported by our customers with blade purchasing,  All parts used in our machines are CE certified and selected with the high-efficiency principle  Knives T.C.T. Carbide 14*14*2,0 mm CERATIZIT Made in EU, bearings COC, motors use the highest quality Turkish or imported products (WEG, SIEMENS, optional).  Automatic lubrication system for the whole machine's essential parts  All machines will be CE standards  The hydraulic system will work with the proportional valve.  Double-armed hydraulic system for the extra power of heavy-duty work  Control panel designed with Mitsubishi Electric, AB (Allen Bradley), Siemens, Schneider, or ABB  Modem Ethernet connection for the main company  The wood shaving machine output will be on the right side or the left side  digital display screen for control in one touch  All blades Diamond 14*14 mm or 15*15 mm, 500 pcs long-life blades  Directly mounted to the cutter head for all-electric motors to prevent losing power  Specially produced spiral helix mobile roller system with a T.C.T. carbide knife (first and only in Turkey)  Separate the control panel and the user interface panel TECHNICAL SPECIFICATIONS Number of Cutterheads 4 Length of Cutter Head 100 cm Number of Blades 500 Carbide/cutter head Power Supply 4 *37 KW = 148 KW (198,5 HP) Hopper Working Stationery Hopper Dimensions mm 3100*1200*1000 Working Voltage 380 V-400V-460V-560V 50-60 Hz Dedpfegmbtqox Aiwekl Conveyor Band Motor 0,75 KW Hydraulic Motor 22-30 KW Total Power 181 KW Cutterhead Speed 2800 rpm Cutterhead Diameter 230 mm Shaving Depth 0,03 mm - 0,05 mm Max.Log Input Length 150-300 cm Max.Log Input Width 10-90 cm Working Distance 2200 mm Machine Dimensions L6450 x H3014 x W2514 mm Weight 17.000 Kg Production capacity: 4.500-5.000 kg/h

Condition: excellent (used), WEINIG RONDAMAT 960 POWERLOCK (AUTO STRAIGHT KNIFE GRINDER AND AUTO PROFILE GRINDING) MIN./MAX. TOOL DIAMETER 100 / 300 MM MAX. TOOL WEIGHT 80 KG MOUNTING ARBOR DIAMETER BY CHOICE CLEARANCE ANGLE - RADIAL AT KNIFE BACK 10 - 30° Dkodjyz Rfyjpfx Aiwel - LATERAL IN MANUAL OPERATION 0 - 20° - STRAIGHT CUTTER HEADS 60° MIN./MAX. GRINDING WHEEL DIAMETER 150 / 225 MM GRINDER SPINDLE DRIVE MOTOR 1.1 KW (1.5 HP) GRINDING SPINDLE SPEED FREQUENCY CONTROLLED 1,500 - 3,000 RPM CARBIDE KNIFE GRINDING OPTION STRAIGHT CUTTER HEAD GRINDING (AUTOMATIC) TOTAL CONNECTED LOAD 2 KW (2.7 HP) “STRAIGHT AND PROFILE CUTTER HEAD GRINDING, AUTOMATIC” PACKAGE QUICK AND PRECISE AUTOMATIC RESHARPENING OF STRAIGHT KNIVES IN THE HEAD, ESPECIALLY WITH A HIGH NUMBER OF TEETH. WITH AUTOMATIC DIVIDING HEAD FOR UP TO 16 TEETH. COMFORT PACK.

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Striebig Standard 6224 TRK I (Wood Support Wall) Cutting capacity Type 6224 L: 5300 x H: 2240 / H: 2100 x D: 80 mm Saw Frame Dkjdsu Nf E Aepfx Aiwel • Precision machined to 1/100 mm accuracy • Solid, self-supporting, firmly welded, torsion-resistant saw frame • TRK2 automatically adjustable aluminum slatted frame with plastic supports • TRK1 automatically adjustable wood support wall • 17-position roller support with 3 brake pedals (Type 6224) • 5.15 m long, divided center support at optimal working height (Type 6224), with aluminum grids • Aluminum small parts support (1 pair) for individual use Saw Beam • Stable, durable steel saw beam construction Saw Unit • Effortless operation thanks to fully balanced Saw unit • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW (7.5 HP) motor • 300/30 mm carbide circular saw blade • 9 mm saw blade projection (undercut) • Integrated stop for horizontal strip cuts • SUPERSILENT sound insulation to reduce saw blade noise • Mechanical motor brake Design, Ergonomics • STRIEBIG-typical product design • Functional and user-friendly ergonomics Installation • Wall or freestanding installation possible - Pneumatically braked support rollers A05 TRK - Paper holder - Complete aluminum small parts support (2-part) - Vertical digital measuring system

Condition: new, functionality: fully functional, Fabr. Vergnano - 4 pcs pre-grinding solid steel hob cutters EGW 20 New - unused Cutting material - grade MC90 HRC 67+68 Dkodpfx Aowb Dfajiwjl Alcrona coating Solid steel hob cutter 40x60x16 Hob cutter (Ø 40x60, bore Ø 16, roughing cutter, overlap) Solid steel hob cutter Fabr. Saazor - 6 pcs, cutting material carbide K-grade + TiAlN Carbide cutters made of HM K-grade material EGW 20, mod 0.8 Ø40x60, bore Ø16 All cutters are new and unused in original packaging Price on request All technical data subject to typographical errors/mistakes Sale exclusively to EU countries.

Condition: used, Particularity: universal cutter sharpening machine, ideal for manually sharpening straight and spiral cutters. It offers a reliable and precise solution for sharpening tasks in workshops and manufacturing facilities. Key features: • Simple and intuitive operation • Backlash-free spiral sharpening mechanism • Smooth adjustment of spiral pitch from 0 to ∞, quickly and easily to the left or right • Sharpening length up to 155 mm • Quick and easy setup • Suitable for HSS and carbide tools Djdpeyzn Eqofx Aiwjkl The set includes: MK 2 chuck and ER 40 collets

Condition: good (used), Year of construction: 2007, Double-head aluminium saw with manual movement of the right head and electronic display. Manual rotation and tilting of the saw heads. Suitable for straight and mitre cuts at 45° (right and left) and tilting at 45° relative to vertical, including intermediate angles. Designed for use with carbide-tipped saw blades Ø 400 mm. Dsdsyl Rpfepfx Aiwekl

Condition: new, amount 3 Packung These are Seco indexable inserts. N-32030 - all 3x packs in original packaging! Type: There are three packs of triangular (T-shaped) indexable inserts. Application: These inserts are used in machining, typically for turning metals. Material: They are made of carbide or a similar wear-resistant material. Dkedpfxox Sry Tj Aiwsl Advantage: When worn, the cutting edge can be easily turned or replaced, which increases productivity.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English Djdpsxuvk Eofx Aiwekl - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Carbide tipped circular saw blades for aluminium machining with the following dimensions: 300 x 3,3 x 32 mm, 72 Z 350 x 3.2 x 20 mm, 84 Z 350 x 3.4 x 32 mm, 56 Z 350 x 3.4 x 32 mm, 72 Z (ground) Dksdpsc R Ty Asfx Aiwol 355 x 2.2 x 25 mm, 66 Z 350 x 4.2 x 34 mm, 54 Z

Condition: new, Year of construction: 2025, Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Work table height: 750 mm • Feed range: 5 to 2300 mm per stroke • Cutting area at 90°: flat elements 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat elements 320 x 335 mm • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: continuously adjustable from 15 to 150 m/min • Maximum load material: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment MEBAeco 335 DGA-2300: • Access protection in accordance with CE thanks to a light barrier. • Robust, two-column linear construction of the MEBA band saw with automatic material feed system (range 5–2300 mm per stroke). • CNC control for easy program entry and visualization. • Automatic cutting at any angle in the range of 30°–135°, with the possibility of setting the length and number of elements. • Possibility to create and manage up to 255 cutting programs. • Intuitive data entry reduces the risk of operator errors. MEBA High Performance Package: • Saw feed by servo drive and ball screw mechanism with automatic monitoring of cutting pressure and feed. • Constant and optimized working conditions when cutting a variety of materials, including thin-walled profiles. • Precise and fast material positioning by means of AC rack and pinion drive with a stroke length of up to 2300 mm and integrated roller conveyor up to 3000 mm long. • Clamping jaw system that allows opening from both sides, with bars for transporting heavier materials. Design and functionality: • Robust saw frame made of welded vibration-resistant steel. • Saw blade set at a 3° angle to the table for increased efficiency and blade life when cutting steel profiles. • Integrated saw blade guides with precision bearings to minimize band deflection. • Carbide sliding guides for maximum precision. • Point 0 (rotate the miter saw) located at the intersection of the blade with the movable clamping jaw, eliminating the need for length correction when changing the angle. • Automatic programming of angles on the control panel. Vice system: • Patented double angle vice system with automatic adjustment of position to the cutting angle, which ensures a secure and precise grip of the material close to the cutting line. • Clamping performed by full-stroke actuators. Other functions: • Automatic lowering of the saw frame in front of the material when starting the cut, minimizing cycle times. • Optimal conditions for both single and serial cuts. • Infinitely variable band saw drive controlled by an inverter (15–150 m/min). • Precisely pre-machined elements eliminating play. Dkodpfxowf Hm Io Aiwol

Condition: new, Year of construction: 2026, functionality: fully functional, Technical specifications: • Cutting diameter: 410 mm • Blade dimensions: 5800 x 41 x 1.3 mm • Feed range: from 5 to 2300 mm per stroke • Cutting area at 90°: flat sections 700 mm x 410 mm • Cutting range at 45°: approx. 410 mm • Cutting area at 45°: flat sections 500 x 410 mm • Circular cutting at 45° (left side): 305 mm • Cutting area at 45° (left side): flat sections 430 x 410 mm Dodpfsx Hyclox Aiwekl • Maximum cutting range at 30°: approx. 320 mm • Cutting area at 30°: flat sections 320 x 410 mm • Cutting speed: stepless adjustment from 15 to 150 m/min • Maximum material load: 250 kg/m • Total installed power: 5.5 kW • Machine weight: approx. 3,450 kg Standard equipment for MEBAeco 410 DGA-2300: • CE-compliant access protection with light barrier. • Robust MEBA twin-column linear band saw design with automatic material feed (range 5–2300 mm per stroke). • CNC control enabling easy program entry and visualization. • Automatic mitre cutting from 30° to 135°, with programmable length and number of parts. • Capacity to create and manage up to 255 cutting programs. • Intuitive data input minimizing operator error risk. • Blade break monitoring sensor • Hydraulic blade tensioning system • Band cleaning brush with separate motor • Cutting line laser marker • Micro-sprayer: blade cooling with oil MEBA High Performance Package: • Saw feed realized via servodrive and ballscrew mechanism, with automatic monitoring of cutting pressure and feed. • Consistent and optimized working conditions for different materials, including thin-walled profiles. • Precise and fast material positioning via AC rack drive with stroke length up to 2300 mm and integrated driven roller conveyor up to 3000 mm in length. • Vice jaw system with double-sided opening capability, including support bars for heavy material handling. Construction and functionality: • Solid, vibration-resistant welded steel frame. • Saw blade positioned at a 3° angle to the table for increased efficiency and extended blade life when cutting steel profiles. • Composite blade guides with precision bearings minimizing blade deviation. • Carbide sliding guides for maximum precision. • Zero point (mitre axis) located at the intersection of the blade and moveable clamping jaw — eliminates need for length correction when changing angle. • Automatic angle programming from the control panel. Vice system: • Patented dual angle vice system with automatic adjustment to cutting angle, ensuring secure and accurate material clamping near the cutting line. • Clamping via full-stroke hydraulic cylinders. Other features: • Automatic lowering of the saw frame ahead of the material at the beginning of cut for minimized cycle times. • Optimal conditions for both single and batch operations. • Stepless speed control of the band drive via frequency inverter (15–150 m/min). • Precisely pre-machined components eliminating play.

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Dkjdpfxjudi Uno Aiwel Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: excellent (used), total power requirement 31,7 kW main drive 7,5 kW Input width 550 mm ca. 25/75 mm ventilator 22kW / 10.800 m³/h Industrial shredder or shredder line with carbide knives for shredding various materials such as wood, cardboard, glass fiber mats or similar, e.g. as pre-treatment for recycling processes. Djdpfx Aioyvvtrowskl The system consists of two infeed conveyor belts, the chipper and a transport fan.

Condition: new, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008-176, The Cambio 500 is a debarker for small logs up to 495 mm (20 inches) in diameter. It operates at feed speeds of up to 120 m/min (393 ft/min). Thanks to its reliability, minimal maintenance requirements, and ultra-low operating costs, the Cambio 500 is the first choice for leading wood processing companies worldwide. Its triangular feed system and carbide-tipped debarking tools, powered by compressed air, are among the key features that ensure superior debarking results. Complete with a feed conveyor. The machine was not in operation and was in storage. Dedpeyl Aqhefx Aiwjkl

Condition: new, Year of construction: 2026, Powerful Band Saw equipped with a movable arm that can rotate from -45° to +60°, a portable vice with quick-locking mechanism, a strain gauge for band tension, and a hydraulically adjustable arm with smooth regulation. Additionally, it features an ergonomically designed control panel, ensuring safety and comfort during operation. The maximum cutting width is 490 mm. Key Features of the Band Saw: The band tensioning wheel is equipped with a dial strain gauge that indicates the proper band tension, ensuring optimal results and blade durability. The saw frame is rigid, made of cast iron, and resistant to twisting. High-quality drive wheels are mounted inside, on which the cutting band is mounted. The control panel is ergonomic, with clearly placed buttons such as the main switch, start, stop, cooling, and band speed control buttons (slow/fast). Additionally, the panel features an emergency stop button that complies with the latest EU safety standards. The panel column contains hydraulic actuator controls, enabling precise regulation of the arm's descent speed and turning it on/off. Djdov R Tgtepfx Aiwjkl The drive is stable, thanks to high-quality hardened and ground gears. The powerful motor is appropriately matched to the sizes of the materials being cut. The band’s guidance is reliable due to bearings in the guides that can be adjusted according to the width of the material being cut. The saw is equipped with a mechanism for automatic shut-off when the arm is lowered. The vice is solid and securely holds workpieces. A limiter for cutting workpieces is included in the set. The hydraulic actuator is reinforced, allowing precise adjustment of the arm's lowering speed using a potentiometer. The saw arm can rotate from -45° to +60°, with the lifting force adjusted using a spring. An efficient cooling system is built into the base of the saw. Workpieces can be quickly clamped in the vice. The vice can be adjusted on both sides, enabling cutting at different angles. The set includes a coolant tank with a pump. The saw’s solid body is made of cast iron, ensuring stability during cutting. The band saw's arm can be locked. The base is rigid, allowing operation at a height of approximately 95 cm, which is standard with the saw. Additional Advantages of the Band Saw: Other features include band speed regulation (35/70 m/min), quick-lock vice, movable saw arm from -45° to +60° with a scale reading, a fully functional device with an excellent price-to-quality ratio, a solid construction ensuring precise, quiet, and vibration-free operation, infinitely adjustable hydraulic arm lowering, durable carbide roller guides, reinforced worm gear with bronze components, automatic end switch, and a liquid cooling system as standard equipment. Technical Specifications: Working height: 870 mm Cutting speed: 35/70 m/min Band saw dimensions: 3770 x 34 x 1.1 mm Band saw width: 34 mm Cooling system pump power: 0.1 kW Total power: 2.8 kW Voltage: 400V Dimensions (width x depth x height): 2200 x 1400 x 1500 mm Weight: 630 kg

Condition: used, Double Head Cutting Saw – FOM ALVA 450 B Professional double head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Year: 2002 Carbide blades Ø 450 mm Dsdpfoyylikex Aiwjkl Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct transmission motor – carbide blade Blade shaft Ø 32 mm Head inclination: 90°   45° external   22.5° external   Intermediate angles with mechanical stop and reading on graduated vernier First head fixed Second head mobile: automatic positioning with manual option Positioning speed (automatic) of the mobile head: 12 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Minimum cutting capacity between the two heads: 300 mm (reducible with dedicated program) Maximum cutting capacity between the two heads: 4000 mm Hydro-pneumatic blade feed (adjustable forward speed – rapid return) Electrical panel separated from pneumatic panel Dual operating pressure with low-pressure servo control Air consumption per working cycle: 28 Nl Vertical and horizontal pneumatic clamps Mist lubrication system Prepared for chip and fume extraction Operating pressure: 7 bar (adjustable) Roller table for mobile head (3 m) Machine in working condition.

Condition: new, functionality: fully functional, machine/vehicle number: 1200SA, conveyor belt length: 135,000 mm, conveyor belt width: 1,000 mm, IPCO 1200 SA steel belt – high-quality austenitic stainless steel, used across a wide range of industrial sectors. The belt is unused and has never been installed on a conveyor system. Dimensions: 135 m (length) x 1000 mm (width) x 1.2 mm (thickness) + 2 × EUR guiding keys on the underside Features and Benefits - High static strength - Excellent fatigue strength - Outstanding corrosion resistance – suitable for food and chemical environments - Good wear resistance - Very good repairability (full service coverage across Europe) Temperature Parameters - Excellent mechanical properties at low temperatures – safe operation down to -80°C - Operating range up to approx. 400°C (750°F) without loss of mechanical properties or corrosion resistance - At 450°C (840°F), chromium carbide precipitation may occur, reducing corrosion resistance Applications - Food industry (cooling, freezing, drying, feed production) - Chemical and pharmaceutical industries - Processes requiring resistance to moisture, organic acids (citric, lactic, acetic), as well as selected inorganic acids (nitric, boric, phosphoric, sulfurous) Dodpoyyaaksfx Aiwjkl Operational Capabilities - Suitable for operation over both full drums and guide wheels.

Condition: new, Year of construction: 2026, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Dodpfxjgculvs Aiwskl Please do not hesitate to contact us.

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Dkodpoyx Irlofx Aiwjl Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: new, The Workline 510.350 DGH is a semi-automatic double miter bandsaw with a swiveling frame design. Equipment features: - Double miter 30° - 45° - 90° - 45° - 30° - Hydraulic full-stroke vice - Infinitely variable bandsaw blade speed - Infinitely adjustable feed and cutting pressure - Automatic cutting pressure regulation - Precision carbide blade guides - Powerful 3 kW drive motor - Simple, easy-to-understand controls - Control panel in ergonomic position - Large-dimensioned hydraulic unit Dsdohg Nvyopfx Aiwekl - Machine built according to current CE standards and safety regulations Includes: - Micro-spray device - Hydraulic blade tension indicator

Condition: new, Semi-automatic metal bandsaw with high cutting accuracy. This machine allows for 90° cuts as well as mitre cuts, infinitely adjustable—left up to 45° and right up to 30°. (Swivel range: left 45° and right 60°) Standard features: - Large, rotatable support table with zero wear! (The saw band’s cutting channel rotates with the mitre) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Saw frame height limitation via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – tube) - Lowering of the saw arm via a hydraulic cylinder; infinitely adjustable - Easy, manual movement of the vice left/right - Electric band tension monitoring with saw blade breakage detection - Coolant pump with dual feed to the saw band guides - Carbide saw band guides and guide rollers Dkjdpfx Aioctgkzewel - Bi-metal saw band M42 - Chip brush Technical Data ● Cutting capacity: 90° round 250 mm / flat 320 x 235 mm / square 235 x 235 mm 45° right round 220 mm / flat 230 x 210 mm / square 210 x 210 mm 45° left round 180 mm / flat 205 x 160 mm / square 160 x 160 mm 30° right round 130 mm / flat 130 x 105 mm / square 105 x 105 mm ● Drive power: 1.5 kW / 400V / 50 Hz ● Total connected load: 3.35 kVA ● Band speed: 20–120 m/min, stepless ● Saw band dimensions: 2910 x 27 x 0.9 mm ● Remnant piece length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1480 x 2000 mm ● Weight: 410 kg Price on request!

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 1,900 mm, total length: 2,300 mm, table width: 400 mm, quill stroke: 520 mm, quill travel distance: 300 mm, type of input current: three-phase, distance table to quill: 120 mm, table length: 800 mm, warranty duration: 12 months, feed length X-axis: 455 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, year of last overhaul: 2026, table load: 800 kg, input frequency: 50 Hz, working range: 900 mm, input current: 10 A, Equipment: documentation/manual, EDM312MF20/30 Machine: Complete Overhaul 12-Month Warranty Year of Manufacture: 2007/2026 Dksdpfxjyxlxie Aiwel Travel Range X/Y/Z: 450x300x300mm Distance Table/Z-Support: 120/520mm Work Table: 820x400mm Work Tank: 900x520mm Filling Height of Work Tank: 300mm Max. Dielectric Volume: 750l Max. Electrode Weight: 30/150kg Workpiece Weight: 800kg Machine Weight: 2800kg Machine Dimensions (W x D x H): 1960x1800x2610mm Equipment: MF20 Operator Interface Optional with MF30 Operator Interface CO² Fire Extinguishing System Cartridge Filter Heat Exchanger Direct Measuring System in X/Y/Z/C Axis C-axis: 100 rpm, Resolution 0.0001° C-axis Holding Brake Generator: 65 Amp EDM Current C-Box for High Removal Rates in Carbide Machining Electrode Changer, 20 Positions Quick-Change Electrode Holder EROWA, Hirschmann, 3R Options: New Control System with MF30 Operator Interface New EDM Generator Fume Extraction with Activated Carbon Filter Training On-site Commissioning Transport