Used Tube Bender for sale (2,665)

Condition: new, Year of construction: 2025, ZGR-1400/1.2mm Our products are best quality and have certificate CE. You are buying directly from manufacturer ! Sheet Folding Machine ZGR-1400\1.2 Lrsdpfx Afocpn E As Sot Technical data: - Maximum working width: 1400 mm - Sheet gauge up to: 1,2 mm (Steel) - Aluminium Plate 1,7 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 15 mm - Protractor - Weight: 150 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) - The machine have certificate CE and 12 months warranty.

Year of construction: 1987, condition: used, machine/vehicle number: 34, Max. pulling force: 10 tons Max. stroke: 1000 mm Cutting speed: 7.5 m/min Return speed: 24 m/min Lsdpfx Afjnd Dme Sert Weight: 6.2 tons The machine is suitable for cleaning tubes.

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 0-4 SD 13, Used bender profile machine , in good conditions It is possible to work on shapes such as triangles, trapezoids, pentagons. With profiles that do not require heating, circles and shapes with curved sides can also be processed. Ljdpfoyziqnex Af Ssrt An automatic profile drilling system is available on request, for the creation of holes for gas injection in the subsequent processing phases. Drilling is carried out with specific drills suitable for all types of profiles, and is carried out automatically in line.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 76,447 h, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Average output: approx. 2,400 sheets/hour Bending capacity round tube R = 45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R = 35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Brass: 4 - 18 x 1.25 mm Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotation speed Z-axis: 900 °/s Lsdpjyzyh Dsfx Af Ssrt Rotation speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Measuring tolerance Y/Z/Q-axis: 0.1 mm Maximum reach at maximum acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Control: DOC 85C Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg Operating hours: 76,447 h EQUIPMENT BLM bar feeder BLM CARM 7 Note: The machine is sold without conveyor belt and safety fencing.

Condition: ready for operation (used), * Brand: AEG / Aviteq * Model: vibrating chute * On stock: 2 pieces * 1 x: length 3000 mm - diameter 500 mm * with: two pieces vibration motors of each 1,3 kW * 1 x: length 5900 mm - diameter 500 mm * with: two vibration motors of 2.3 kW each Lsdpfx Asywmb Asf Ssrt

Condition: used, functionality: fully functional, Year of construction: 2016, Combined profile and tube bending machine Manufacturer: Italy For round tubes up to 48 mm 1st station for ring bending for large radii 2nd station for tube bending up to max. 180 degrees Electrically driven Motor: 1.1 kW, 400 V, 50 Hz, 3-phase With digital display With foot pedal Lrodoy Ryfnopfx Af Sjt With tooling for 42.4 mm tube, radius approx. 150 mm Weight approx. 350 kg

Condition: used, Year of construction: 1999, color: red, loading space volume: 5 m³, loading space width: 1,700 mm, loading space length: 4,500 mm, loading space height: 600 mm, mileage: 1,001 km, first registration: 01/1999, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, tailgate Body: City skip loader with a drive-over tailgate, approximately 5 m³ capacity. Year of manufacture unknown, as no identification plate is present. Internal container. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Ljdpfx Afoy U N Nks Sjrt

Condition: used, color: red, overall weight: 7,000 kg, maximum load weight: 5,990 kg, empty load weight: 1,010 kg, loading space volume: 5 m³, loading space width: 2,150 mm, loading space length: 4,500 mm, loading space height: 500 mm, mileage: 1,001 km, first registration: 08/2018, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, tilting platform. Body: City skip loader with a drive-over tilting platform, approx. 5 m³ lower container. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Lsdpfsy Spx Tsx Af Ssrt

Condition: used, Year of construction: 1999, color: red, loading space volume: 5 m³, loading space width: 2,150 mm, loading space length: 4,500 mm, loading space height: 500 mm, mileage: 1,001 km, first registration: 01/1999, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, tailgate Body: City roll-off container with a drive-over tailgate, approx. 5 m³, year of manufacture unknown as no nameplate is available. Accessories for the upper container: information provided without guarantee, subject to changes, prior sale and errors. Lrodpfoy Spydex Af Set

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° Lodpfx Afexab E Sj Ssrt tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7385, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Transfluid, controller model: IPU 20, pipe diameter (max.): 648 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 180 °, bending radius (max.): 125 mm, bending radius (min.): 50 mm, working width: 6,000 mm, mandrel length: 5,500 mm, number of axes: 3, working height: 1,300 mm, table length: 7,000 mm, table width: 900 mm, table height: 1,300 mm, overall weight: 1,000 kg, total length: 7,000 mm, total width: 900 mm, total height: 1,300 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 1,320 l, operating pressure: 200 bar, Equipment: documentation/manual, emergency stop, Bending software requires a new update. Bending mandrels are available, bending tools are not included. Lrodpfx Asxcxupof Sst

Condition: used, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 0872101270802, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser hours: 6,000 h, laser power: 3 W, pipe diameter (max.): 152 mm, pipe length (max.): 6,500 mm, workpiece weight (max.): 23 kg, type of cooling: water, overall weight: 23,900 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Model: ADIGE / BLM GROUP LT7 Machine Type: Automatic 3D fiber laser tube/profile cutting machine Laser Source: Fiber laser Laser Power: 3kW Cutting Diameter: Ø12 – Ø152.4 mm Lrsdezzzb Aspfx Af Set 3D Cutting Head: BLM GROUP 3D Tube Cutter Max. Profile/Bar Weight: 23 kg/m Minimum Loadable Length: 1900 mm Max. Loadable Length: 6500 mm Automatic Loading: Yes Bundle Loading: Yes Single Profile/Bar Loading: Yes Max. Bundle Loading Capacity: 5,000 kg Automatic Unloading: Yes Unloading Position: 3 programmable positions Unloading Length: 6500 mm Processable Materials: Carbon steel, stainless steel, aluminum, copper, brass Standard Configuration: 6500 mm loading + 6500 mm unloading Machine Weight: Approximately 23,900 kg (including fume extraction system) Average Power Consumption – O₂: 15 kW Average Power Consumption – N₂: 20 kW

Condition: new, Year of construction: 2025, functionality: fully functional, BAYKAL LASER TUBE CUTTING MACHINES: BLT 2D or 3D cutting, from 1 kilowatt to 6 kilowatts, laser tube cutting machine for superior quality, no need for sawing, drilling or deburring. BAYKAL BLT 2D or 3D Lasertubes is a fast and flexible tube laser cutting machine with 6 meters and 8 meters size options and a cutting option XXL pipes up to 220 millimeters and rectangular tubes up to 220 by 220 millimeters , wall thicknesses of up to 10 millimeters for mild steel. Important technical information for BAYKAL BLT 2D or 3D Lasertubes; Maximum outside diameter of round tube in millimeters: 220 Maximum outside dimensions of rectangular tube in millimeters: 220 by 220 Maximum workpiece weight in kilogram/meter: 70 Technical specifications for loading; Load 1 ( front rear ): Bundle Load 2 ( front rear ): Semi auto load Load 3: Manual Minimum loading length (meter): 2 meters Maximum unloading length (meter): 4 - 6 meters Bundle loading capacity (kilogram): 3500 kilogram Technical specifications for unloader; Three programmable positions, rear conveyor belt and motorized front and rear collection tables. Unloading length (meter): 4 - 6 meters Lrjdport Hursfx Af Sst

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Lrodpfx Afshwrhms Sjt CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2021, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 2,000 W, pipe length (max.): 6,000 mm, working length: 6,000 mm, input voltage: 400 V, type of cooling: water, overall weight: 8,000 kg, HSG TH65 tube and profile cutting laser. The machine is designed for processing various types of metal materials, including structural steel, stainless steel, and aluminum. It enables the cutting of tubes and profiles. The device is equipped with an automatic material feeding system, a laser cutting head, and control software. The machine can be inspected at our production facility. Cutting tests can be arranged upon prior agreement. Lodpfxoxu Ewhe Af Sort

Condition: as good as new (ex-display), Year of construction: 2023, Adira E-Brake BB base configuration: Adira Electric Press Brake Ledoz A Thhjpfx Af Sort - AD 75 control system (Y1/Y2, X, R, Z1/Z2) with 3D graphical programming and automatic sequence optimization, (BG1 for BB3515 and BG2 for 5020) - Bluedrive technology - Standard table with basic 60 mm Promecam dies - Promecam quick-release upper tool holder - 2 front supports on a 500 mm guide rail - IRIS safety light curtains - CE safety compliance - Standard tooling kit - Robot interface

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Completely Overhauled – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005. This machine will undergo a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good technical and optical condition and will be ready for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Completely Overhauled Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Work Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 will undergo a comprehensive and professional overhaul in our facility. As part of the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally repaired or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire work tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines Ledpfx Asz Atdrjf Ssrt * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul is completed ## Quality Inspection and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality inspection. This includes, in particular, a detailed erosion test according to the quality and testing requirements of OPS INGERSOLL. This test will verify the relevant machine functions as well as the accuracy and process reliability. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit will be immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large work area, this machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively overhauled wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability.

Condition: new, Oil tank capacity: 40Bending capacity: (Flaches Material) 200 x 18Bending capacity: (Runde Rohre) 60 x 4,0pressure: 40working speed: 10Return speed: 10motor: 3table area: 660 x 1250working height: 930length: 1250width: 650heigth: 1250stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. Lrjdpfjr I H A Rox Af Sjt With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: new, Oil tank capacity: 120Bending capacity: (Flaches Material) 320 x 15Bending capacity: (Runde Rohre) 114 x 8pressure: 80working speed: 10Return speed: 10motor: 10table area: 750 x 1425working height: 930length: 1430width: 750heigth: 1450weight approx.: 1700stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Lredpfer I H Dcex Af Sot Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • 2 units available, identical machine • Machine design: 60° slant bed • Guideways: Roller guideways • Max turning diameter: 250 mm • Max turning diameter (standard): 120 mm • Max turning length: 900 mm • X1 travel (upper slide): 300 mm Lrodpeyvz Ibofx Af Sst • Z1 travel (upper slide): 650 mm • Y1 travel (optional): ±40 mm • X2 travel (lower slide): 180 mm • Z2 travel (lower slide): 650 mm • X3 travel (counter spindle): 175 mm • Z3 travel (counter spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Maximum rod diameter (without reducing tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% ED): 35 / 25 kW • Main spindle speed range: up to 5000 rpm • Main spindle torque (40/100% ED): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2000 rpm • C-axis holding torque: 270 Nm • Counter spindle power (40/100% ED): 26 / 21 kW • Counter spindle speed range: up to 5000 rpm • Counter spindle torque (40/100% ED): 290 / 230 Nm • C-axis (counter spindle) speed: 2000 rpm • C-axis (counter spindle) holding torque: 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm • Motor torque X/Z: 6 / 10.5 Nm • Motor speed X/Z: 3000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3000 rpm • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (counter spindle slide): 15 / 30 m/min • Feed force X/Z (counter spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (counter spindle): 0.0005 mm • Motor torque X/Z (counter spindle): 10.5 / 10.5 Nm • Motor speed X/Z (counter spindle): 3000 rpm • Ball screw pitch X/Z (counter spindle): 10x32 / 20x40 mm • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: all 12 stations capable of driven tools • Driven tool power (40/100% ED): 11.7 / 8.4 kW • Driven tool torque (40/100% ED): 28 / 20 Nm • Driven tool speed: up to 4000 rpm • Tailstock stroke (optional): 300 mm • Tailstock force: 150 / 630 daN • Center size: MK 4 • Hydraulic tank capacity: 20 l • Hydraulic pump power: 2.2 kW • Hydraulic pressure max: 90 bar • Clamping pressure main spindle: 80 bar • Clamping pressure counter spindle: 70 bar

Condition: new, pressure: 40stroke: 250table diamension: 625 x 1.100total power requirements: 4,0weight approx.: 0,92messurements (LxWxH): 1,15x0,70x0,95 Ljdjd Ab Iaepfx Af Sjrt

Condition: new, pressure: 22stroke: 200table diamension: 625 x 1.100total power requirements: 2,2weight approx.: 0,635messurements (LxWxH): 1,100x0,630x0,925 Lodpfx Aod Ab Ibof Sert

Condition: used, Year of construction: 1995, Technical details: cutting diameter: 300 mm Ljdpfx Aezp Iu Sjf Sert saw band length: 3200 mm saw band width: 25 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm Lrodpfjuxftrex Af Set table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total height: 2,500 mm, total width: 4,000 mm, total length: 10,000 mm, overall weight: 3,000 kg, We offer for sale a complete, professional VORAN fruit processing line. This line is designed to process a wide range of fruits (apples, pears, plums, peaches, currants, and others) and is suitable for growers, orchard owners, juice producers, farms, or processing facilities, as well as suppliers of fruit juices for schools, kindergartens, or catering businesses. The equipment was purchased new from the manufacturer, VORAN, and the description states that it has not been used in regular operation. Assistance with commissioning the line and contact information for service are also available. The technological equipment included in the offer: - GKE pallet tipper with switch and hydraulic cylinder - WA LC direct sorting table with hopper - WA LC fruit washing and crushing machine, adapted for the GKE line, with solenoid, with a stated capacity of up to 3,000 kg/hour. - VORAN EBP 650 single-belt press including accessories - 2 x stainless steel tank, 1,100 liters each Ljdpfxjz D E Suj Af Sert - DN 25 corner tube screen with 0.25 mm stainless steel filter and stand - PA 1000 pasteurizer for natural gas, with accessories and heat exchanger, with a stated capacity of up to 1,000 l/hour. - VORAN Bag-in-Box filling machine MBF 1500 with a stated capacity of up to 1,500 l/hour, including stainless steel table - Six-head filling machine for direct filling of bottles from the pasteurizer - VORAN EP 1000 pitting machine with a stated capacity of up to 1,000 kg/hour, including screen - Eccentric screw pump including control - Connecting elements, hoses and other accessories The offered unit represents a complete technological line, from fruit receiving and sorting through washing, crushing, and pressing to pasteurization and product filling. Inspection is possible by prior arrangement.