Used Trumpf Trumatic 235 for sale (385)

Condition: ready for operation (used), Trumpf / Hüttinger 1456168 control box Flow 36-48kW SN: 200128104 - 13.56MHz E, used, in good condition, 100% functional, scope of delivery as per photos Cedpfx Alezu Hkpjbjrg

Condition: ready for operation (used), Trumpf 12-11-59-00/02 Radiation Protection B SN: , used, in good condition, 100% fully functional, scope of delivery as per photos. Cedpfozu Hkvox Albjrg

Condition: ready for operation (used), Trumpf test module for direct current, used, in good condition, 100% functional, scope of delivery as shown in the photos. Crjdpfx Aozu Hmkslbog

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Crjdpfxezu Avzs Albeg Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,044 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, laser power: 6,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 fiber L76 FMC was manufactured in 2022. It features a working format of 3,000 x 1,500 mm and a powerful 6000W solid-state disk laser. The machine includes an automatic longitudinal pallet changer and advanced cutting capabilities, such as adaptive lens systems and automatic nozzle changers. If you are looking to get high-quality fiber laser cutting capabilities, consider the TRUMPF TruLaser 5030 fiber L76 FMC machine we have for sale. Contact us for further details. • Working format/area: 3,000 x 1,500 mm; X 0–3,000 mm / Y 0–1,500 mm / Z 0–115 mm • Machine design: Closed machine frame; gantry drive with direct linear drives; automatic longitudinal pallet changer; integrated control cabinets and storage cabinet; working-area lighting; machine status light; water/air machine and laser chiller; CE compliant; ambient temp 5–35 °C • Dynamics/accuracy: Max simultaneous axis speed 280 m/min; Ps 0.03 mm; Pa 0.05 mm; min programmable increment 0.001 mm • CNC control: Siemens SINUMERIK 840D sl with 21.5" color MultiTouch; MultiTouch HMI; USB and RJ45; integrated technology data; programmable cutting gas/pressure; production planning; multi-sheet processing; automatic shutdown; Remote Support interface; Condition Guide; Cutting Guide; Central Link; Online Update Manager • Laser source: TRUMPF TruDisk 6001 (6 kW) solid-state disk laser; fiber-optic beam delivery; one LLK output; closed beam guidance; high back-reflection resistance; stable output over service life • Cutting head: Universal cutting unit; single cutting-head strategy; adaptive lens system; protective glass with online condition monitoring; auto nozzle centering; collision protection; capacitive height control; automatic focal position; pilot laser • Standard cutting functions: AdjustLine; BrightLine fiber; ControlLine; FastLine; FlyLine; FocusLine; NitroLine; PierceLine; Performance package; Highspeed cutting package; Copper and Brass cutting packages; Micro-weld • Additional cutting package: Highspeed Eco (fusion cutting, medium-thickness stainless steel) with up to 70% cutting-gas reduction and up to 100% sheet throughput increase • Automatic nozzle changer: 21 positions; automatic change/cleaning/re-setting tied to material/process; reduces setup/handling • Drop&Cut: Integrated camera; assigns live image of residual sheet to part geometry; live cutting preview; no separate programming needed for basic use • Process monitoring camera: Front-area monitoring (~2.5 m); remote observation; preliminary result assessment; video stream output to external monitor • Pallet/material handling (machine-integrated): Automatic longitudinal pallet changer; loading/unloading parallel to machining; pallet access from three sides • 1 x license TruTops Boost Additional equipment • LiftMaster Compact 1530 (AL34) automatic loading/unloading system • Type 1530; max sheet 3,000 x 1,500 mm; min sheet 1,000 x 1,000 mm • Max sheet thickness 25 mm; max sheet weight 900 kg; max unloading weight 900 kg • With rake lifter: max thickness 25 mm; with rake lifter + belt system: max thickness 15 mm • Minimum part size with rake lifter: 150 x 150 mm • LiftMaster equipment/options • Storage connection; extended pallet travel out of machine • Sheet separation device; double-sheet detection; synchronous loading • Thin-sheet separation (0.8–2.0 mm); loading station for 90 mm stack height • Structural-steel loading grippers, 67 mm pitch, replaceable tines Csdpfszuzwdsx Albjrg

Condition: ready for operation (used), Year of construction: 1998, overall weight: 8,600 kg, This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine. Additional equipment • Extended Installation Height and Stroke: Additional 150 mm each • 2nd Foot Switch Machine Benefits Technical Machine Benefits • Drive type: electro-hydraulic twin cylinder with independent y1/y2 movement • Power requirements: 11 kw / 415 v / 50 hz • Design: down-stroking with dual cylinder electro-hydraulic ram drive via proportional valves • Inclination of beam (y1/y2): +10 mm • Bending force: 850 kn // gap between columns: 2260 mm // throat depth: 410 mm // stroke length: 215 mm // open height: 385 mm • Bed width: 120 mm • Ram measurement: incremental with deflection compensation • Tool holders: self-centering top tool holder, hardened bottom tool holder • Hydraulic tool clamping: hydraulic clamping for both top and bottom tools • Safety features: safety screens, light barriers, single/double break modes // front support brackets: two quick-adjustable brackets Crodszuxkhopfx Albjg Extra Information Back Gauge: CNC-controlled ‘X’ and ‘R’ axis back gauge with safe 2-finger adjustment X-axis Back Gauge Travel: 600 mm Maximum X Distance: 860 mm R-axis Vertical Travel: 250 mm Back Gauge Travel Speed: 500 mm/sec R-axis Speed: 300 mm/sec Z1/Z2 Axis: CNC-controlled, asymmetric finger adjustment Working Speeds: Approach Speed: 200 mm/sec Operation Speed: 1–10 mm/sec Return Speed: 135 mm/sec Technical Specification Bending Length 2550 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2025, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, The laser was fully functional and in very good technical condition until its professional dismantling. The machine was regularly serviced by an authorized service provider, and a complete service history is available. In 2025, all mirrors were completely replaced. The dismantling and professional disconnection of the machine were carried out by an authorized service provider. The machine is currently safely stored in a dry warehouse and is ready for shipment. Videos of the machine in operation are available. Codpov Hxbbefx Alberg

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: Siemens 840D, _____ Description: Year of manuf. : 2014 Power : 3000 kW Technical Specifications Working area:X = 3,000 mm / Y = 1,300 mm / Z = 600 mm B-axis:135° C-axis:n × 360° Crodpfx Aszuq Npelbjg Laser light cable:30 m LLK:0.10 mm Control system:Siemens 840D Teach panel:including teach software Equipment :- Safety enclosure with 1 window and a column for the control panel :- Safety cabin for the rotary changer :- Rotary changer, Ø 4,000 mm :- Extraction pipework :- Scrap conveyor belt :- Status indicator light at the top :- 2 × loading status lights for the rotary changer :- 4 × configurable control interfaces :- Anti-tripping guard Laser Nitrogen:present Oxygen:present Argon:not present Air:not present FastLine Cell:not present ObserveLine:not present Probe:not present

Condition: ready for operation (used), Year of construction: 2018, operating hours: 2,874 h, punching force: 17 t, sheet thickness (max.): 6 mm, number of axes: 3, This 3-axis TRUMPF Trupunch1000 S05 was manufactured in 2018. It features a working area of 2500 x 1250 mm and is equipped with maintenance-free three-phase motors. The machine includes a linear magazine with 20 stations for clamps and tools, and an electro-hydraulic punching head with programmable features. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trupunch1000 S05 CNC punching machine we have for sale. Contact us for further details. Cjdezc R Enjpfx Albsrg - Working Area: 2500 x 1250 mm (Medium Format)- Drives: Maintenance-free three-phase motors- Frame: C-frame- Tool Storage: Linear magazine with 20 stations for clamps and tools- Clamps: 2 hydraulic sheet clamps- Punching Head: Electro-hydraulic punching head, rotating mono-tool adapter, programmable stripper position, tool length compensation, slug extraction- Functions: Forming, MultiTool, MultiBend, Thread forming with tap breakage control, Signing / fast beading- Control: TRUMPF control based on Rexroth IndraMotion MTX- Interface: USB interface, RJ45 network connection, Wireless Operation Point (VOS basis)- Table Type: Ball table with brush inserts- Safety: CE marking, multi-beam light barriers, rapid drive shutdown- Frequency: 50 Hz- Voltage: 400 V- Included Accessories: 18 original Trumpf tool cassettes (including 10 RTC-cassettes 2017 with die plates from original order), extensive selection of punching tools, and a Trumpf "quicksharp" punch grinding machine (YOM 89)

Condition: used, Year of construction: 2002, Trumpf TruPunch 5000 Large Format Travel range of the X-axis in punching mode: 3,050 mm Travel range of the Y-axis in punching mode: 1,550 mm Sheet thickness: max. 8 mm Crodpfx Alozudwmobog Workpiece weight: max. 200 kg Punching force: max. 220 kN Stroke rates Punching stroke rate at 1 mm: 1,350 min⁻¹ Marking stroke rate: 3,000 min⁻¹ Part removal Part size, part flap during punching: max. 500 x 500 mm Part size, fixed chute during punching with a moving table: max. 80 x 50 mm Options: Multi-tool Threading tools Marking function Chip conveyor Vibration-damped installation

Condition: used, Year of construction: 2008, laser welding machine Laser welding system Csdpfxozv Ec Hs Albsrg Trumpf TLC1000P Year of manufacture 2008

Condition: good (used), Year of construction: 2006, functionality: fully functional, Press force: 50 t Bending length: 1275 mm Frame width: 1040 mm Stroke: 215 mm Usable installation height: 385 mm Overhang: 420 mm Standard equipment: - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC back gauge with rack and pinion drive for the X and R axes Crjdpezt R Hrsfx Albeg - Safe shifting of the gauge fingers from the front - Upper tool clamping system "New Standard Clamping II" manual - Lower tool holder for EV dies, clamping hydraulic, shifting programmable (2 positions) - Control system TRUMPF TASC 6000 - Safety device consisting of side and rear protective doors - Control cabinet air conditioning - Network compatible Optional equipment: - 2 additional gauge fingers, attachable - Upper tool clamping hydraulic - Bendguard - Roll protection cover at the rear - Support console - Preparation for ACB

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 170 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 445 mm Accessories: - 2 front support arms - Light curtain in front of the machine - Foot switch - Wila quick-release system at the top and bottom Cedpfx Aozt R Euelbsrg - TASC 6000 control system - Die shifting mechanism - Including tools - Crowning - 6-axis back gauge

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Press force: 300 t Bending length: 4050 mm Distance between uprights: 3550 mm Cjdpfozt R A Hox Albsrg Control system: EHT EPS D01-3D Total power requirement: 30 kW Machine weight (approx.): 24,000 kg Machine height: 3.60 m Operating hours (approx.): 12,000 h Accessories/Equipment: Rear back gauge system, 5-axis Travel range and back gauge area Travel range X-axis: 600 mm Max. back gauge range in X: 1000 mm Travel range X1-axis: ± 125 mm Travel range R-axis: 200 mm Travel range Z-axis: 3150 mm Accuracy Positional deviation of the axes X-axis: 0.02 mm X1-axis: 0.02 mm R-axis: 0.05 mm Z-axis: 0.05 mm Speeds X-axis: 1200 mm/s X1-axis: 300 mm/s R-axis: 200 mm/s Z-axis: 1200 mm/s

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and production-ready. Ideal for automotive, aerospace, and general metalworking applications requiring precision 3D contour cutting on tubes, hydroformed parts, and complex profiles. Machine at a glance Model: TRUMPF TruLaser Cell 8030 Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed on inspection) Operating hours: 70,000 h total / 41,125 h beam-on Condition: Fully operational, currently in series production Service history: Annual maintenance exclusively by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Codpfx Aloukhlteberg Uninterrupted OEM service record – no third-party interventions Our difference: modular handover, not just a machine sale We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 staff, 12 M€ revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose what fits your project: ModuleScope M1 – Ex WorksPick-up at our site, loaded onto your truck. Machine tested before handover.Buyers with own rigging and installation capacity. M2 – DeliveredM1 + international transport, insurance, and unloading at your facility (DAP/DDP on request).Buyers with internal installation team. M3 – Delivered & InstalledM2 + mechanical installation, utility connection, first power-up, laser alignment.Buyers without dedicated installation resources. M4 – TurnkeyM3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol.Buyers who want the machine producing from day one. On-site inspection and sample cuts on your own parts available at our facility in France prior to purchase.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 70,000 h, machine/vehicle number: S1631C0047, laser hours: 38,125 h, laser power: 3,000 W, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and ready for production. Ideal for automotive, aerospace, and general metalworking applications requiring precise 3D contour cutting on tubes, hydroformed parts, and complex profiles. Machine at a glance Model: TRUMPF TruLaser Cell 8030 Cedpey E Iv Rsfx Alborg Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed upon inspection) Operating hours: 70,000 hours total / 41,125 hours beam-on Condition: Fully operational, currently in series production Service history: Annual maintenance exclusively performed by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Uninterrupted OEM service record – no third-party interventions Our difference: modular handover, not just a machine sale We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 employees, 12 million euros in revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose the one that fits your project: Module Scope M1 – Ex Works: Pick-up at our site, loaded onto your truck. Machine tested before handover. For buyers with their own rigging and installation capabilities. M2 – Delivered: M1 + international transport, insurance, and unloading at your facility (DAP/DDP on request). For buyers with an internal installation team. M3 – Delivered & Installed: M2 + mechanical installation, utility connection, first power-up, laser alignment. For buyers without dedicated installation resources. M4 – Turnkey: M3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol. For buyers who want the machine producing from day one. On-site inspection and sample cuts on your own parts are available at our facility in France prior to purchase.

Condition: used, Year of construction: 2011, machine/vehicle number: E1053A0497, overall weight: 850 kg, For sale is a TRUMPF TruDisk 4002 (4C) disc laser / laser source, including a separate KLH cooling unit RW 20/0 SK. Laser technical data: * Manufacturer: TRUMPF Laser GmbH + Co. KG * Type: TruDisk 4002 (4C) * Year of manufacture: 01/2011 * Laser power: 4,000 W * Equipment No.: E1053A0497 * Supply voltage: 380 V (-10%) to 460 V (+10%), 3 AC + PE * Frequency: 50–60 Hz * Connection power: 23 kW / 25 kVA * Rated current: 34 A at 400 V * Protection class: IP54 * Weight: approx. 850 kg Cooling unit: * Manufacturer: KLH Kältetechnik GmbH * Type: RW 20/0 SK * Year of manufacture: 2017 * Part No.: E123223000AA * Serial number: 17KLH00670 * Voltage: 400/460 V * Frequency: 50/60 Hz Codpfx Aljzvqfyjberg * Refrigerant: R134a * Refrigerant quantity: 3.7 kg The TruDisk 4002 is offered together with the KLH cooling unit shown in the picture. Inspection is possible by arrangement. Further technical information and images can be provided upon request.

Condition: excellent (used), Year of construction: 2014, 3 kW resonator power Credoyxc Afspfx Albog

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0270 A0115, control type: CNC control, laser power: 5,000 W, sheet thickness (max.): 20 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 160 A, input frequency: 50 Hz, compressed air connection: 7 bar, For sale: TRUMPF TruLaser 5060 laser cutting machine, laser power 5,000 W, manufactured in 2007. The machine is fully operational, currently connected in production, and can be inspected while powered on by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser 5060 Machine type: A0270 Machine no.: A0270A0115 Year of manufacture: 2007 Laser power: 5,000 W Power supply: 400 V / 50 Hz Rated input: 105 kVA Required fuse protection: 3 × 160 A Control voltage: 24 V DC Compressed air: 7–10 bar Nitrogen N₂: 30 bar Oxygen O₂: 20 bar Included equipment: Crjdozgc Hwspfx Albog KLH Kältetechnik chiller, type L30/36-TK3.02 Refrigerant: R134a, filling quantity 21.5 kg Hante MF-L extraction/filter unit Air volume: 2,500 m³/h Filter area: 50 m² Standard accessories as per agreement Condition: Used machine, fully functional and currently connected in production. Inspection while powered on is possible in Košice, Slovakia. Sale with invoice. Price is net, VAT not included. Dismantling, loading, and transport are at the buyer’s expense and responsibility. The machine will be available for collection approximately from 09/2026, or by agreement. Location: Košice, Slovakia

Condition: used, Year of construction: 2011, laser hours: 68,800 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, We are offering this used TRUMPF TruLaser 3040 laser cutting machine, manufactured in 2011. Material number: 1441919 Control cabinet: TruLaser 3040 Power type 3: 50 Hz Voltage: 400 V Max. fuse rating: A Wiring diagram / version: 93730-5-210_05 Crsdozvbhxepfx Albeg Wiring diagram / version: 93730-5-2000_05 Wiring diagram / version: 93730-5-3000_05 Serial number: 933 Year of manufacture: 2011 Equipment number: A1240A0148 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), functionality: fully functional, Year of construction: 2006, The machine is being sold due to a plant modernization. Only 3,000 operating hours for laser cutting. Immediately available. Inspection and demonstration under power are possible by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser Tube 5000 (T01) Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Laser type: CO₂ laser TruFlow Working area, tube length: 6,500 mm Max. round tube diameter: 150 mm Max. rectangular profile / circumscribed circle: 150 mm Max. material weight: 20 kg/m Max. workpiece weight: 130 kg Automatic tube support Crodjzlr Rpopfx Albog Self-centering clamping system

Condition: used, Year of construction: 2001, functionality: fully functional, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Csdow Imq Repfx Alberg

Condition: good (used), Year of construction: 2014, pressing force: 100 t, table length: 3,050 mm, clearance between the columns: 2,550 mm, overall weight: 7,700 kg, Press force: 100 t Bending length: 3050 mm Frame width: 2550 mm Total power requirement: 20 kW Machine weight approx.: 7,700 kg Accessories/Equipment: - Light curtain in front of the machine - Tools - 2 stop fingers Crsdpjztakgefx Albjg - DELEM DA 60 touch control - Foot switch

Condition: good (used), Year of construction: 2011, total length: 5,100 mm, total width: 2,200 mm, total height: 3,400 mm, overall weight: 19,700 kg, Press force: 230 t Bending length: 4050 mm Distance between uprights: 3550 mm Upright overhang: 420 mm Oil capacity: 400 l Control system: ModEva 10S Cjdpfx Aljztafqobsrg Machine weight (approx.): 19700 kg Dimensions: 5100 x 2160 x 3420 mm Equipment/Accessories: - Automatic tool clamping, pneumatic - Motorized crowning - Akas-Fiessler safety laser - Bending aid 1 + 2 (right and left) - Die shifting m1 and m2 - Axis-controlled: Y1, Y2, Xs, Xm, X delta, R, Z1, Z2

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Crodpfx Alezd U D Njbog Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us.