Used Translation Stage for sale (2,652)

Condition: new, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 37 mm, spindle mount: MK 4, drilling depth: 130 mm, height adjustment type: mechanical, Equipment: CE marking, For sale is an absolutely brand-new and unused pillar drilling machine / stand drilling machine from the Mashstroy brand, model PMC 40. This is a so-called "NOS" (New Old Stock) unit – the machine comes from warehouse stock, has never been used in production, and is in immaculate original condition (partially still in factory preservation). Those who appreciate the robust construction of high-quality Eastern European machines will find here an indestructible machine for all time, which is far superior to modern Far Eastern imports in terms of stability. Technical data & highlights at a glance: • Manufacturer: Mashstroy (ZMM Group / Bulgaria) • Model: PMC 40 • Condition: Factory new, unused, fully functional • Drilling capacity in steel: max. 32 mm • Spindle mount: Morse taper 4 (MT4) • Power connection: 400 V (high voltage) • Special features: Massive cast iron construction, mechanical feeds, integrated cooling system, height-adjustable and swiveling drilling table (without any damage or "drilled holes"). Cedszbymxjpfx Agverc Technical specifications • Condition: New / Unused • Max. drilling diameter in steel (St 40 kg/mm²): 32 mm • Max. drilling diameter in cast iron (GG 20): 37 mm • Max. threading in steel (St 40 kg/mm²): M20 • Max. threading in cast iron (GG 20): M24 • Overall height: 1900 mm • Table dimensions: 490 x 380 mm • Base plate dimensions: 470 x 680 mm • Base plate clamping surface: 360 x 310 mm • Max. spindle stroke: 130 mm • Distance spindle – table: min. 55 mm / max. 800 mm • Max. distance spindle face – base plate: 1180 mm • Main motor power (2-stage): 1.5 kW / 0.9 kW • Motor speed: 1415 / 700 min⁻¹ • Number of speed stages: 14 • Feed: Manual and automatic feed • Automatic feed range: 0.09 – 0.11 – 0.22 mm/rev • Cooling system: Integrated coolant pump (0.060 kW / 2800 min⁻¹)

Condition: new, power: 95 kW (129.16 HP), gearing type: automatic, fuel type: diesel, color: green, overall weight: 8,500 kg, empty load weight: 5,500 kg, maximum load weight: 3,000 kg, axle configuration: 4x4, number of seats: 1, emission class: euro5, operating hours: 45 h, driver cabin: other, wheelbase: 2,510 mm, maximum speed: 40 km/h, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, fog lights, onboard computer, power assisted steering, soot filter, trailer coupling, Vehicle location: Bovenden, rear window, air conditioning, radio, cruise control, ABS (anti-lock braking system), raised exhaust, differential lock, fog lights, high beams, work lights, trailer hitch (air-light-hydraulic), sunroof Wheelbase: 2510 mm. New vehicle from stock, registered on March 26, 2024! Deutz-Fahr 6125 C RVShift Stage V Farmotion engine Variant C 40 km/h EXTRAS Additional lifting cylinder Lower links with quick couplers (Walterscheid) Cat. III Walterscheid electric control unit for H "Ready Kit" for vehicle Codpfx Agjzbx Syeverc Power Beyond coupling Front windshield that can be opened Cab, mechanically sprung. Tires: 440/65R28 front, 540/65R38 rear ASM system (Automatic Row Management) Mounting for external monitor Cab roof with opening transparent sunroof, smartphone holder Passenger seat Radio with Bluetooth and DAB Aeromat seat Sauermann trailer hitch with automatic side stabilization L+R Dual-circuit compressed air braking system M.R. Version EU/DE DL brake 12V socket + USB connection + ISO connection 2 additional front work lights, repeating lights 120 Ltr. load-sensing sprung front axle 2 electric control units + 2 mechanical Front hydraulics Front PTO complete, 1000 rpm for SDF 6125 C The vehicle can be switched to 50 km/h! Stoll front loader console ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), Year of construction: 2018, operating hours: 2,900 h, mast type: telescopic, fuel type: diesel, color: other, Drivetrain Drive: Track Make of engine: Deutz Weights Empty weight: 7.680 kg Functional Lifting capacity: 250 kg Working height: 1.400 cm CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Emission level: Stage VI / Tier VI Delivery terms: EXW Max. horizontal reach: 1200 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Latest inspection: 2026-03-12 Additional information Crsdpfx Aozbw Slegvsc Please contact Martyn Joosse for more information

Condition: used, mileage: 72,000 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 04/2016, emission class: euro6, color: silver, number of seats: 9, Year of construction: 2016, total length: 6,195 mm, total width: 2,038 mm, total height: 2,673 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, For sale is a well-maintained Hyundai H 350 touring bus with the globally popular 2.2-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly maintained * Euro 6 standard * First owner * M1 passenger car registration Codpjzbw Iysfx Agvjrc Equipment: * Touring bus * 8 + 1 seats, conversion by Vogelsitze GmbH including reclining function (see pictures) * Ventilation at the seats * Kitchen including storage compartments * Automatic climate control front + rear * Reversing camera * Cruise control * Lane keeping assist * Electrically extendable step * LED daytime running lights * Roof window * Sliding windows left and right * Multifunction steering wheel * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and much more... Technical data: Permissible total weight: 3500 KG * Unladen weight: approx. 2820 KG * Payload: 680 KG * Trailer load: 2500 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transfer license plates (5-day / customs registration) usually on the same day * Pick-up service from the airport or train station All vehicles are professionally prepared and hygienically clean! The special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and smart repair All our vehicles have also undergone a thorough maintenance service. Of course, this includes new fluids, filters and other expenses that you should not have to worry about. Optionally, we can present the vehicle at an independent testing center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments or special requests, do not hesitate to contact us! More information and insights into our business philosophy can be found on

Condition: used, mileage: 72,000 km, power: 125 kW (169.95 HP), first registration: 04/2016, fuel type: diesel, number of seats: 9, gearing type: mechanical, emission class: euro6, color: silver, Equipment: air conditioning, onboard kitchen, For sale is a well-maintained Hyundai H 350 touring bus with the globally popular 2.2-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly maintained * Euro 6 standard * First owner * M1 passenger car registration Equipment: * Touring bus * 8 + 1 seats, conversion by Vogelsitze GmbH including reclining function (see pictures) * Ventilation at the seats * Kitchen including storage compartments * Automatic climate control front + rear * Reversing camera * Cruise control * Lane keeping assist * Electrically extendable step * LED daytime running lights * Roof window * Sliding windows left and right * Multifunction steering wheel * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and much more... Technical data: Permissible total weight: 3500 KG * Unladen weight: approx. 2820 KG * Payload: 680 KG * Trailer load: 2500 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transfer license plates (5-day / customs registration) usually on the same day * Pick-up service from the airport or train station Crjdpjzbw Itofx Agvjc All vehicles are professionally prepared and hygienically clean! The special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and smart repair All our vehicles have also undergone a thorough maintenance service. Of course, this includes new fluids, filters and other expenses that you should not have to worry about. Optionally, we can present the vehicle at an independent testing center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments or special requests, do not hesitate to contact us! More information and insights into our business philosophy can be found on

Condition: used, mileage: 125,000 km, power: 84 kW (114.21 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 12/2017, emission class: euro6, color: blue, number of seats: 7, total length: 6,945 mm, total width: 1,993 mm, total height: 2,725 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Volkswagen Crafter MAXI with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6 standard * 2nd owner (1st owner was Volkswagen, with a day registration) * Service booklet available * M1 passenger car registration Equipment: MAXI version * 7 seats * Electric step * Auxiliary heater (air) * Parking distance control front + rear * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 3500 KG * Unladen weight: approx. 2350 KG * Payload: 1150 KG * Trailer load: 2000 KG Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions Csdpfx Agszbw I Hoverc * Transfer license plates (5-day/ customs registration) usually on the same day * Pick-up service from the airport or train station All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and smart repair All our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters and other expenses that you shouldn't have to worry about. Optionally, we can present the vehicle at an independent inspection center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on: Special features: Audio system RSD 2000 (speakers in the front), exterior mirrors electrically adjustable and heated, rear turn signals (roof), grab handle on the B-pillar, driving assistance system: parking aid front and rear, Isofix mounts for child seat in the rear seat, headrests in the rear adjustable in height/tilt, spare wheel in driving condition, mud flaps in the front, seats in the driver's cab: double passenger seat, seats in the cargo/passenger compartment: 1st row, 3-seater bench, narrow, seats in the cargo/passenger compartment: 2nd row, 3-seater bench, reinforced front axle, additional heater. Additional equipment: Storage compartments: luggage net on the rear tailgate, storage compartments: shallow tray/compartment, above the windshield, airbag on the driver's side, anti-slip control (ASR), exhaust pipe straight to the rear, floor covering in the cargo/passenger compartment rubber, roof lining, driving assistance system: brake assistant (HBA), chassis: reinforced rear shock absorbers, suspension: comfort suspension in the rear, window in the cargo/passenger compartment: - fixed, rear left, window in the cargo/passenger compartment: - fixed, rear right, window in the cargo/passenger compartment: - fixed, center left, window in the cargo/passenger compartment: - fixed, center right, window in the cargo/passenger compartment: - fixed, front left, window in the cargo/passenger compartment: - fixed, front right, additional noise reduction (driver's cab), rear wing doors with glazing, heated rear window, body/structure: standard high-roof station wagon, body variant: high roof, headrests in the front adjustable in height/tilt, marker lights on the side, model update, engine 2.0 liters - 84 kW TDI, wheelbase 4325 mm, tire pressure con

Condition: excellent (used), fuel type: diesel, color: blue, = Additional Options and Accessories = - Central lubrication system = Further Information = Model year: 2019 Intended application: Construction Drive: Wheeled Number of cylinders: 6 Unladen weight: 37,000 kg Body manufacturer: FUCHS MHL 350 CE certification: yes Technical condition: very good Optical condition: very good FUCHS MHL 350 MATERIAL HANDLER Model: 2019 CE certificate Engine: Deutz 6.1 L6 Tier 4 final EPA 160 kW Boom reach: 16 m, Boom 8.5 m, Stick 7.2 m Hose rupture protection on boom Cab: Hydraulic cab elevation Fuchs Fox Cab Air conditioning Superstructure: Standard Fuchs paint Central lubrication system Undercarriage: Mobile, 4 outriggers 8x new solid rubber tyres 12.00-20 Lighting: various lights on boom, grab and cab General Information Type: Bridge crane Model year: 2019 Color: Blue Technical Data Credpeyhzpfjfx Agvoc Number of cylinders: 6 Fuel type: Diesel Gross weight: 37,000 kg Emission class: Stage IV FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINES FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: new, empty load weight: 3,140 kg, maximum load weight: 7,360 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Cedpfx Agszai Ehjverc

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031174, empty load weight: 5,835 kg, maximum load weight: 29,165 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use. Chassis Tipping Semi-Trailer Fine-grained steel welded construction in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Curved front wall (patented) 24 t 2-speed support legs, single-sided operation, with straight base, without compensating rod 2x wheel chocks with holder Aluminium side underrun protection Rear under-run protection, foldable 6x half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarpaulin rod with bracket 2x rear towing hooks Axles & Suspension BPW disc brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle with automatic lift, including forced lowering and starting aid, operated by '3x brake' application Braking System 2-line compressed air braking system Colour-coded routing for easy servicing Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: This trailer must only be towed by tractor vehicles that ensure ABS functionality! With lift & lower valve Vehicle stability control system Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Tipping Body Aluminium box body made of high-quality, abrasion-resistant material Crjdpsy Efcuofx Agvec Sloped 5 mm thick front wall with external cylinder mounting Side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail. Internal ladder at the front wall Shovel and broom holders outside front wall Rear wall with pendulum mounting and 'double-joint' hinges, with 2-winged door split 1/2 to 1/2, upper swing beam, with one grain slide per door Rear wall with rubber seal 6 mm continuous floor Standing platform with access, connecting plate for air/electric/brake Roll tarp can be stowed one side (FR-right), with central locking (FR-left) Operating Notes For transporting salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion and damage from the material. The total weight stated is technically possible; depending on the cargo, the full weight may not be achievable within the permissible axle/support/saddle loads (incorrect load distribution may result in poor handling and tracking). Note! Not suitable for chemically aggressive substances (e.g., acids, chlorine compounds, sulphur compounds, alternative fuels); such substances can cause stress corrosion cracking and extreme cracking in the body when combined with moisture on the body surface! Vehicles with load bodies are intended for chemically non-aggressive cargo. Use for transporting aggressive goods such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at the operator's own risk. This can result in damage such as stress corrosion cracking or pitting. Archive images are shown!

Condition: used, machine/vehicle number: WFDFLT33902030053, empty load weight: 5,835 kg, maximum load weight: 29,165 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,540 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use. Crjdpfx Aoy Edtfogvoc Chassis - Tipper Semi-Trailer Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with replaceable 2" king pin Patent-protected curved front end 24 t 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Foldable underrun protection Axles & Suspension 3x BPW disc brake axles with 430 mm disc diameter "Axles/chassis laser measured" - reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift function, including forced lowering and traction assistance, activated by "brake 3 times" (traction assist is operational up to a 30% axle load exceedance and a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking System 2-line compressed air braking system Spring actuated parking brake 2 front interchangeable coupling heads, without connecting hose EBS - Electronic Braking System with EBS socket at front, without connection cable Attention: This trailer may only be towed by tractor units that ensure full ABS functionality! With lift & lower valve Vehicle - Driving Stability System Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrical System 24 Volt, multi-chamber lights, LED side marker lights (amber) 2 x 7-pin interchangeable sockets at the front, without connection cable, electrics not fully functional. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Body Aluminum box body made of high-quality, wear-resistant material. Sloped bulkhead, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, precision-welded, with upper rail profile for protection against bulk cargo. Interior access on the front wall (not in combination with Cramaro cover). Shovel and broom holder on front wall exterior. Greenline - conical and aerodynamic body design "Membrane" tailgate Rear wall suspended with "double hinge" and split 1/2 to 1/2 two-wing door, swing arm on top, with one grain slide per door. Floor plate continuous, 6 mm thick Standing platform with access, connector plate for air/electricity and brakes, with spacious area for maximum operability. Roll tarp can be opened to the right (FR-right) and locked on the left (FR-left) with central locking. Operational Notices For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rusting. The stated gross weight is technically possible. Depending on the type of load, the gross weight may not be achievable within the permissible axle, support, and fifth wheel loads. Note! Not suitable for chemically aggressive materials (e.g. acids, chlorine compounds, sulfur compounds, "refuse-derived fuels"); such substances can cause stress corrosion cracking on damp body surfaces, potentially resulting in severe fracturing of the body structure. Vehicles with loading bodies are designed for non-chemically aggressive loads. Transporting aggressive substances such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at your own risk. This may lead to stress cracks or pitting corrosion damage. The images shown are archive photos. The vehicle may still be in use.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, The images shown are archive photos; the vehicle may still be in use! Approx. fifth wheel height: 1200 mm Chassis: Semi-trailer tipper Basic lightweight construction, kingpin plate with interchangeable 2" kingpin, patented curved front bulkhead Folding underrun protection, underrun protection with spring assistance for easier handling Integrated mudguard bracket with stone-repellent surface Crjdpfjyylapox Agvec Axles & Suspension: SAF disc brake axles with 430 mm disc diameter; axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle including forced lowering and starting aid, activation by "3x braking" (starting aid is functional up to a 30% axle overload and up to a maximum speed of 25 km/h) Braking system: 24 Volt EBS electronic braking system with EBS socket at the front (no connection cable), test port for brake cylinder pressure routed to the outside of the EBS module, with raise & lower valve Paver brake, electrically operated from the truck without truck installation, automatic tipper lowering with shut-off valve "TPMS" tire pressure monitoring system as per ECE R141, display via monitor in towing vehicle through EBS (requires appropriate truck setup; only for standard tires) Axle load detection via EBS-CAN bus signal for display in the cab; truck must be preconfigured, no truck installation Wheels and Tires: 385/65 R22.5 steel rims Electrics: Side-mounted yellow LED lights synchronised with indicators (flashing side lights) 2 white front position LED lights 2 white/red rear marker LED lights LED work lights on both sides; 2 additional work lights integrated into the rear Hydraulics: Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO (power take-off) Body/Tub: Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Internal ladder at the front bulkhead Greenline - conical and aerodynamic body shape “Membrane” tailgate Tailgate as hydraulic rear door opening upwards; clearance approx. 2,200 mm Side walls continuously 5 mm thick, base continuously 8 mm thick Body is insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom, and rear with Fliegl Isotherm "Flip Top sliding cover", automatic rear lock as folding hoop. Cover built to front. Electrically operated cover with 7-pin plug (charging plug) at front, no connection cable, no truck installation; operation on trailer and via remote control. Operational notes: For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the material. The specified gross weight is technically possible, but depending on the load, the gross weight may not be achievable while observing permissible axle, support, and coupling loads. (Improper load distribution may lead to poor driving and tracking performance) Paintwork: Frame: DB 7350 Nova Grey "10 years warranty against corrosion" Support legs: black coated Body: RAL 1007 Narcissus Yellow Roll tarp: RAL 7038 Agate Grey

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902035293, empty load weight: 5,663 kg, maximum load weight: 29,337 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2024, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5", color: blue, trailer brake: trailer braked, The images are archive photos // Multiple units available! // The vehicle is still incoming! Chassis Semi-tipper chassis Basic lightweight construction, fifth wheel plate with exchangeable 2" kingpin Patented “Curved” front wall Central telescopic landing leg, uncoupling under load not possible; when uncoupled, the vehicle must be inclined towards the rear 2 wheel chocks with holders Foldable underrun protection Underrun protection with spring assistance for easier use 6 half-shell mudguards Integrated mudguard bracket, stone-repellent surface Splash guards behind the last axle, asphalt version, mounted on mudguard with hinge, top hook-in feature for shortened mudguard Tarpaulin rod with bracket 2 towing hooks at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment for reduced tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, additionally electrically operated from truck, including forced lowering and starting aid, no truck installation required Hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Crsdpfxeyux H Dj Agvoc Braking System 2-line compressed air brake system Color-coded line routing for easier servicing Spring-loaded parking brake 2 mix-up-proof coupling heads at front, no connecting line 24V EBS, electronic braking system with EBS socket at front, no connection cable With raise/lower valve Vehicle stability control system Driver’s brake, electrically operated from truck, no truck installation required Automatic tipping lower with shut-off valve Trailer Info Module for displaying vehicle data Axle load detection via EBS CAN-bus signal Wheels and Tires 385/65 R22.5”, brand per manufacturer’s choice Polished aluminum rims Protective caps for wheel bolts Electrics 24V, multi-chamber lights, yellow LED side marker lights 2 white LED position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin error-proof sockets at front, no connection cable LED work lights at both sides Additional integrated LED work lights at rear Hydraulics High-pressure cylinder rated up to 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm Operated hydraulically via truck PTO Body Steel round body in "Stone Master Design" made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mounting. Interior ladder at front wall Shovel and broom holder external at front wall "Membrane" tailgate Tailgate as pendulum flap, mounted externally with dual hook locking. Two clamping screws with toggle closures at lower sides. Pendulum tailgate spacers—can be hooked into the clamping screws Central grain chute Fliegl S.T.E.P. – foldable front standing platform with folding access ladder, for left-side access Body in insulated version, Fliegl Asphalt Profi Thermo, sheet metal cladding "Flip Top sliding cover", automatic rear lock as folding bow. Cover is extended towards the front. Electric drive cover, with 7-pin socket (charging socket) at the front with no connecting cable, including loose tractor socket, operation on trailer and via remote control. 7-pin spiral connection cable to truck for sliding cover, truck must be equipped with a suitable socket.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902035294, empty load weight: 5,663 kg, maximum load weight: 29,337 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2024, loading space length: 7,200 mm, loading space width: 2,550 mm, loading space height: 3,310 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5, color: blue, Year of construction: 2024, The images are archive photos // Multiple units available! // The vehicle is still in transit! Chassis: Semi-trailer tipper Basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front panel Central telescopic support, uncoupling while loaded not possible Foldable underrun protection Half-shell mudguards Tarp bar with holder Tow hook at rear Crsdoyu Rllspfx Agvjc Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned 1st axle automatic lift axle, additionally electrically controllable from the truck, including forced lowering and starting aid, no installation on truck required Braking system 2-line compressed air brake system Spring-loaded parking brake 2 mistake-proof coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Automatic tipping lowering with shut-off valve Trailer info module for displaying vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system messages. Axle load detection via EBS CAN bus signal Wheels and Tires 385/65 R22.5 Polished aluminum rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at front 2 white/red lane control lights at rear 2x 7-pin and 1x 15-pin mistake-proof sockets at the front Hydraulics High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, without hose connection Body Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mounts Interior with ladder on front wall Shovel and broom holder outside on the front wall Tailgate as a pendulum flap, externally mounted with double hook locking. 2 tension screws with toggle latches on the bottom sides. Spacer for pendulum tailgate, can be hooked into tension screws Side walls 4 mm throughout, floor 4/5 mm thick, wear- and weight-optimized construction Fliegl S.T.E.P. – pivoting front catwalk with retractable access ladder on the left side for lateral access, only in combination with "Flip Top sliding cover" Body in insulated version, Fliegl Asphalt Profi Thermo, insulated at front, sides, bottom, and rear with Fliegl Isotherm panel cover, "Flip Top sliding cover," automatic rear lock with folding bows. Cover deploys forward. Electrically operated cover, with 7-pin socket (charging socket at front without connecting cable, including loose tractor socket, no installation on truck, control on trailer and via radio remote control) 7-pin connecting cable to truck as spiral cable for sliding cover, socket must be available on the truck Operation Notes For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion from aggressive materials. The stated gross weight is technically possible; depending on cargo, the gross weight may not be reached due to legal axle/support/fifth wheel load limits. Note: Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, substitute fuels). Vehicles with loading bodies are intended for non-chemically aggressive loads. Paint finish Frame: DB 7350 Novagrau Support legs: galvanized Body: RAL 5002 ultramarine blue Roll tarp: RAL 5002 ultramarine blue

Condition: used, mileage: 34,468 km, power: 125 kW (169.95 HP), first registration: 03/2025, fuel type: diesel, empty load weight: 2,625 kg, maximum load weight: 875 kg, overall weight: 3,500 kg, wheelbase: 4,325 mm, fuel: diesel, color: white, gearing type: mechanical, suspension: other, number of seats: 3, total length: 7,000 mm, loading space length: 4,370 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, soot filter, traction control, Disc brakes, double passenger seat, interior trim, wooden loading floor, extra long, tail lift, touchscreen, heat-insulating glass, clock & tachometer, brake pad wear indicator, 2-door, 1st owner, Euro 6e, green emissions sticker (4), Apple CarPlay, Android Auto, steel wheels, breakdown kit, reversing camera, black, 6-speed gearbox, passenger airbag, navigation with color monitor, color monitor for navigation system, park assist camera, electric windows (front), radio/MP3, external temperature display, heated exterior mirrors, power steering, electrically adjustable exterior mirrors, speed limiter, comfort seats, roof spoiler, rear-wheel drive, center armrest, German version, further features available, subject to errors and prior sale, trade-in possible, financing available – please contact us for a tailored offer. Credpfozbu H Tsx Agvjc 02 Digital extra: Updates for intelligent speed assistant, A50 front axle with increased load capacity, AR2 axle ratio i = 3.923, BA3 active brake assist, C6L multifunction steering wheel, CB7 stabilization stage I, CL1 steering wheel adjustable for tilt and height, E07 hill start assist, E1D digital radio (DAB), E1 digital extra: hard drive navigation, E1U USB socket 5V, E2A connection for special signal cockpit, E2I additional battery for retrofit consumers, interior, E30 single-pole battery main switch, E36 separation relay for additional battery, E46 socket in cab, E4S digital extra: smartphone integration, E57 electrics for trailer socket, E7M MBUX multimedia system, ED4 AGM battery 12V 92Ah, ED8 pre-installation for parameterizable special module electrics, EK1 terminal strip for electrical connection, ES0 jump start contact, ES5 charging package instrument panel, EW6 digital extra: Remote Services Plus, EY2 digital extra: live traffic information, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, F68 heated and electrically adjustable exterior mirrors, FF5 storage above windscreen, FG8 front cup holders, FJ1 folding lid for storage compartment, FJ4 under-cockpit storage compartment, FR pre-installation electrics for reversing aid, FT1 split...

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, Year of construction: 2019, operating hours: 5,464 h, Equipment: air conditioning, General information Year of manufacture: 2019 Technical information Drive: Wheel Engine type: Perkins 904J-E28T Empty weight: 10.324 kg Dimensions (LxBxH): 690 x 246 x 299 cm Csdpjyzhxdofx Agverc Functional Mast: articulated arm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - Hammer/sorting function - Hammer function - Hydraulic quick coupler - Rotation function - Sliding leaf = Remarks = Drivetrain Internship / Tier: Stage IV / Tier IV final Condition CE type: CE Powertilt with hydraulic quick coupler, 3 buckets, adjustable boom, 4-wheel steering with 3 steering modes, fenders, 30 km/h, rear view camera

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, empty load weight: 326 kg, maximum load weight: 1,174 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 256 150 1500 1 NEW VEHICLE Internal dimensions: 256 cm x 150 cm Side wall height: 30 cm Loading surface height: 66 cm Gross vehicle weight: 1500 kg Payload: 1182 kg Braked single-axle high loader Overrun brake and handbrake by KNOTT Axle with large brakes and cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tension latches Drop-down and removable on all sides 15 mm thick, non-slip, durable phenolic plywood floor Automatic jockey wheel rated for 400 kg support load 8 noise-reducing lashing eyes with 800 kg tensile strength Reinforced 13" C-rated tires with steel valves M+S (Mud & Snow) tires Net/rope hooks on the frame Crjdperk Ir Uefx Agvjc 13-pin plug LED front marker lights Rear lamps with reversing light, fog light (NSL), and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026: - Equipment for 100 km/h approval (shock absorbers) - Spare wheel with holder - Without sideboards (discount) - Side wall extension to 35 cm - Black Edition (powder-coated sideboards and rims in black) - Loading ramps - Steel plate on floor panel - Complete LED lighting - Anti-theft device - Net, fine or coarse mesh - H-frame - Mesh sides in various heights, also enclosed - 30 cm extension side walls with tension latches - Flat tarpaulin with or without bows - High tarpaulin 160 cm or 180 cm More accessories available on request! Plus shipping to Gera and vehicle registration document: €200 net Images are exemplary and may show optional equipment subject to surcharge. Haven’t found the right trailer yet? We have 50–100 vehicles permanently in stock and ready for immediate pickup. The workshop is open for all types of repairs on weekdays from 8:00 am to 5:00 pm. Specialist for axle repairs, including for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh (Note: unclear reference, not translated) We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or stop by in person.

Condition: new, Discover the ultimate power and precision of our vertical lathe series. With its robust construction and proven technology, it delivers groundbreaking results for your machining projects. Experience the limitless possibilities of our CNC variant and take your production to the next level. TECHNICAL MAIN DATA (CNC MODEL): - Max. swing diameter: 1500/1800/2750/4000/5000 mm - Max. turning diameter: 1250/1600/2500/4000/5000 mm - Max. workpiece height: 1000/1600/2000/2000/2000 mm - Spindle motor power: 30/37/55/75 kW - Table diameter: 1000/1250/2250/3600/3600/4500 mm - Max. table speed: 500/400/120/63/63/50 rpm ACCESSORIES: Fanuc or Siemens control, ZF gearbox, chip conveyor, lubrication system, hydraulic system, machine guard, air gun, tricolor lamp, work light, chip cart, foot pedal, standard tool holder. SPECIAL ACCESSORIES: C-axis, tool magazine, linear scale, tool presetter, workpiece probe, electrical cabinet air conditioner, special tool holder, and more. For further details, please refer to the attached PDF file. TECHNICAL MAIN DATA (CONVENTIONAL MACHINE): - Faceplate diameter: 1000|1400|1800|2000|2300 mm - Swing diameter: 1200|1600|2000|2300|2600 mm - Turning height: 1000|1250|1400|1600|1500 mm - Table speed: 6.3-200|5-160|3.2-100|5-160|2.5-80 m/min - Gear stages: 16 - Max. workpiece weight: 3.2|5|8|8|8 t - Main motor power: 22|30|37|37 kW - Approx. machine weight: 9|14|18|23|21 t ACCESSORIES: Tool holder: 5-fold; Faceplate: with 4 jaw clamps; Servo motors: for axis adjustment, and more. For further details, please refer to the attached PDF file. Cedjd I I Ilopfx Agvsrc Conventional vertical lathe with solid and proven technology, power, and precision for the machining of heavy workpieces. - Optimal loading - easily accessible with crane and forklift - Vertical support with 5-fold tool holder and side support (optional) with separate feed for internal and external machining - Heavy-duty column construction with wide, hardened guides - Hydraulic clamping of the crossbeam - Stable guide construction provides excellent stability and accuracy to the vertical arm - The spindle runs in a highly precise double-row roller bearing and is adjustable - The drive is through a reduction gear for high torque and a speed range of 2.5 - 80 min- Warranty: 12 months on the machine Now get a 15% energy subsidy from BAFA when replacing an old machine! Also benefit from the favorable leasing and hire purchase conditions of our leasing partners. Ask us about it. Of course, you also receive free delivery, assembly/commissioning, and ready-to-use handover as well as control training from us. The special net price displayed refers to the smallest model of the conventional series. The images show the CNC variants as well as a conventional version.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 80 mm, turning diameter: 560 mm, center width: 2,000 mm, New CNC cycle lathe ZDM 560 x 2000 with Siemens 828D ShopTurn 2. Machine Overview The ZDM 560 x 2000 is a robust and versatile flat-bed CNC cycle lathe designed for flexible production, maintenance, and training environments. It combines the benefits of conventional lathes with state-of-the-art CNC control technology. Thanks to the Siemens 828D ShopTurn control system, it enables simple and intuitive programming. The machine is particularly suitable for single-part and small batch production and is available for immediate delivery from stock. 3. Technical Data ZDM 560Z Swing diameter over bed (mm): 560 Swing diameter with 6-position turret (mm): 420 Max. workpiece length (mm): 2000 Max. turning length (mm): 1900 Max. turning length with 6-position turret (mm): 1735 Max. swing diameter over cross slide (mm): 330 X-axis travel (mm): 320 Z-axis travel (mm): 1970 Crjdpfxeqwqiao Agvoc Rapid traverse X/Z (m/min): 8/10 Spindle mount: A2-8 Spindle bore (mm): 80 Spindle nose taper: MT7 Spindle speeds (RPM) with manual chuck: 27-135 / 55-270 / 160-805 / 325-1630 Gear stages: 4-speed Tool shank (mm): 32x32 Tailstock quill diameter (mm): 75 Tailstock quill stroke (mm): 150 Tailstock quill taper: MT5 Main motor (kW): 7.5 Net weight (kg): 4100 Machine dimensions LxWxH (mm): 3000×1250x1580 4. Standard Equipment • Siemens SINUMERIK 828D ShopTurn • 80 mm spindle bore • 250 mm 3-jaw chuck • Manual tailstock • Coolant and lubrication system • Full enclosure • LED work light • CE conformity 5. Stock Machine Features • Chip conveyor for 2000 mm machine • 6-position electric tool turret • Fixed steady rests (60–190 mm and 150–280 mm) • Teach-in control panel with handwheels and joystick Additional accessories available on request 6. Special Features / Benefits • Easy operation via ShopTurn • High flexibility for single-part and small batch production • Robust cast construction • Large spindle bore for bar machining • Immediately available – no delivery lead times 7. Scope of Delivery Machine including standard equipment and above-mentioned special equipment, ready for operation. 8. Delivery Time Immediately available from stock in Stockstadt.

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: 001-2009, MAPSFERA 1 09 METAL SORTING LINE, consisting of a vibrating feeder, conveyor belt, head magnetic pulley, and eddy current separator, designed for efficient automatic separation and recovery of ferrous and non-ferrous metals in industrial recycling applications. • Manufacturer: MAPSFERA • Model: 1 09 • Configuration: vibrating feeder + conveyor belt + magnetic pulley + eddy current separator Cedpfx Ajzbtrzogvorc • Application: separation of ferrous and non-ferrous metals from mixed waste streams • Status: available for inspection • Current condition: dismantled / stored The system is designed for continuous industrial operation in material recovery and recycling plants, enabling highly efficient metal sorting from mixed input streams. The vibrating feeder ensures a controlled and uniform material flow, while the conveyor system transports the material through the various separation stages. The head magnetic pulley removes ferrous metals, and the eddy current separator allows for the effective separation of non-ferrous metals such as aluminum and copper, improving overall recovery rates and material purity.

Condition: used, Year of construction: 1997, operating hours: 0 h, functionality: fully functional, machine/vehicle number: 00000, ROUND LOG INFEED AND CUTTING LINE - Round log infeed to band saw in a two-part design - Cutting line, 4-4.5-5-5.5 meters (manually and continuously adjustable) with conveyor for sections and sawdust separator, as well as a robust sawdust screw conveyor - Automation and control system, as well as sensors for automatic/continuous cutting - "Nigger" (likely a mis-translation or colloquial term) for positioning logs on the bogie carriage SAWING AND CONVEYING - Carriage: Primultini electric with 2 log turners, length 5.70m Crodpjzbtq Rsfx Agvjc • Clamping block 1-2: 86cm • Clamping block 2-3: 145cm • Clamping block 3-4: 220cm - Block band saw BRENTA, roller width 130mm, with control panel for all systems - Trimming band saw BRENTA, roller width 130 - PAUL KMEL edging saw, year of manufacture 1974 Incl. roller conveyors for infeed and outfeed Incl. control system and spare parts Incl. crosscut saw for cutting the boards to length - Edging saw “old” type CORONA - Roller-chain conveyors for all saws, as shown in the photos

Condition: excellent (used), Year of construction: 2023, 2023 Keyence IM-8030T Series Image Dimension Measurement System Cjdpfxszbr Saj Agverc Image Sensor 1" 20-Megapixel Monochrome CMOS. Display 12.1" LCD Monitor (WXGA: 1,280 × 800mm). Receiver Lens Double Telecentric Lens. Field of View Wide-Field Measurement Mode 300 × 200mm (4× R50). High-Precision Measurement Mode 225 × 125 mm. Minimum display unit 0.1μm. Repeatability Wide-Field Measurement Mode Without Stage Movement ±1μm, With Stage Movement ±2μm. High-Precision Measurement Mode Without Stage Movement ±0.5μm, With Stage Movement ±1.5μm. Measurement Accuracy (±2σ), Wide-Field Measurement Mode Without Binding ±3.9μm, With Binding ±(7 + 0.02 L) µm, High-Precision Measurement Mode Without Binding ±2 µm, With Binding ±(4 + 0.02 L) µm. Outer Diameter Measurement Accuracy Wide-field Measurement Mode ±(2.8 + 0.02 D) µm, High-Precision Measurement Mode ±(1.4 + 0.04 D) µm*15. Light Probe Measurement, Measurable Area (XY) 190 × 90mm. Maximum Measurement Depth 30mm. Light probe Diameter ø3mm. Measuring Force 0.015N. Repeatability ±2 µm. Measurement Accuracy ±(8 + 0.02 L) µm. Height Measurement Unit- Measurement Range 0 To 75mm, Measuring Force 0.3N, Measurement Accuracy (XY) ±0.2 mm, Minimum Display Unit 1µm, Measurable Area (XY), Wide-Field Measurement Mode 145 × 95mm, High-Precision Measurement Mode 107.5 × 95mm, Repeatability ±2µm, Measurement Accuracy ±7.5µm.'X,Y'Stage (Electric) 200 x 100mm. Maximum Mass 7.5kg. 'Z' Travel 75mm. Voltage 240V. S/No. AC0N000263. NOTE: This item will be loaded to buyer's vehicle, a loading charge of £25 + VAT will be added to the buyer's invoice. With Keyboard, Mouse & Test Piece. NOTE: This item will be loaded to buyer's vehicle, a loading charge of £25 + VAT will be added to the buyer's invoice.

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 100 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 40 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B100-2100 – 100 Ton x 2100 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Distance between upper and lower die (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance between columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D touchscreen graphic display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Back Gauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European-Type Quick Tooling Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Short Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the tools to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Black plexiglass protective panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel in accordance with VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measuring system Supports the operator Optional Features CT-BEND Servo Motorized X + R Axis Back Gauge System Servo motorized X and R axis movement X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm AKAS II Front Safety Laser System + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Maximum working distance: 4.3 meters Delem DA66T CNC Control Unit (17” Touchscreen) 17” 2D touchscreen graphic display 2D drawing and 3D visualization / product simulation User-friendly interface 1 GB hard drive Automatic bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction Windows-based operating system 2 USB ports Csdpfx Aozbrf Tjgvorc Data backup Offline Profile-TL programming feature Technical Specifications Bending Force: 100 Ton Bending Length: 2100 mm Distance between columns: 1600 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 5000 kg Main Motor Power: 5.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: used, functionality: fully functional, overall weight: 9,300 kg, Year of construction: 2021, operating hours: 4,060 h, Equipment: UVV, Wacker Neuson ET90 – Crawler Excavator Year of manufacture: 2021 General equipment Fully glazed, tilting safety cab Cab heater Side sliding window Front windshield that can be recessed inwards Air-suspended driver's seat with seat heating Automatic climate control Complete DAB radio Rear view camera LED work lights at the front and rear Additional ballast (+291 kg) Diesel refueling pump Proportionally controlled auxiliary hydraulics (AUX I) Shock absorber for auxiliary hydraulics "Advanced" overload warning system with safety valves for boom, stick, and blade cylinders Proportionally controlled control circuit (AUX II) Grapple control circuit (AUX V) Preparation for Easy Lock / hydraulic quick coupler (AUX IV) Preparation for PowerTilt (AUX III) Engine Water-cooled Perkins turbo diesel engine Model: 904J-E28T 4-cylinder engine Power: 55.4 kW (75.3 hp) Emission standard: Stage V / Tier IV Final Exhaust gas aftertreatment: AGR (Exhaust Gas Recirculation) DOC (Diesel Oxidation Catalyst) DPF (Diesel Particulate Filter) Air filter with integrated cyclone pre-separator Idle speed automatic control Hydraulic system Load-Sensing Hydraulic System (LUDV) with variable displacement pump Pump output: 180.5 l/min Hydraulic pilot control with joystick operation Valve control according to ISO, DIN, SAE, PCSA and EURO standard Auxiliary hydraulics for two directions of movement, piping to the stick (AUX I) Auto-2-speed travel drive: Two travel speeds with automatic switching Gear can be locked manually Hydraulically pre-controlled and dampened travel pedals and travel levers Hydraulic oil cooler Proportional control for auxiliary hydraulics (AUX I) Crodozbrfmjpfx Agvoc "Basic" overload warning system

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 60 t, stroke length: 210 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 410 mm, ram plate length: 2,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise sheet metal bending applications, offering a bending force of 60 tons and a bending length of 2100 mm. Standard Features Stroke: 260 mm Daylight (Distance between lower and upper die): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance between Columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSSTECH Servo Motorized X-Axis Back Gauge System X-axis travel distance: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Steel frame construction Hardened ball screw spindle Hardened linear guide system Optional 1000 mm X-axis Back Gauge Fingers 2 pieces Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Structure to prevent sheet metal sagging European Type Quick Die Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving design CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slots can be applied according to the tools to be used Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Amada compatible Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Amada compatible B Series Open Frame Design Black plexiglass protection panels Wide field of vision Professional appearance Ergonomic design Codpfx Aozbrfaegvjrc Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel conforming to VDE standards Schneider or Siemens electrical equipment Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Scale measurement system Supports the operator Optional Features Servo Motorized X + R Axis Back Gauge System Servo motorized X and R-axis movement X-axis travel distance: 750 mm Accuracy: ±0.05 mm X-axis can be extended up to 1000 mm AKAS II Front Safety Laser System + Rear Light Curtains Finger protection system Laser-based safety system Increases operator safety CE compliance Maximum working distance: 4.3 meters Delem DA53Tx CNC Control Unit (15” Touchscreen) 15” color touchscreen 2D product drawing and simulation Angle correction calculation Angle measurement and correction USB data transfer Data backup Offline profile-TL programming Remote access and fault management Technical Specifications Bending Force: 60 Ton Bending Length: 2100 mm Distance between Columns: 1600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 4290 kg Main Motor Power: 5.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 100 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, throat depth: 410 mm, Equipment: CE marking, documentation/manual, safety light barrier, HPB B100-3100 – 100 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B100-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is designed for precise and repeatable sheet metal bending operations, offering a bending force of 100 tons and a bending length of 3100 mm. It provides high performance for metalworking and industrial production facilities, thanks to its ESA S830 CNC control unit, servo motor-driven back gauge system, high-rigidity frame structure, and professional tooling equipment. Standard Features Stroke: 260 mm Bottom – Top Die Gap: 465 mm Throat Depth: 410 mm Bending Length: 3100 mm ESA S830 CNC Control Unit (3-4 Axes) 10” 2D Touchscreen Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (Crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSS Servo Motorized X-R Axis Back Gauge System X-axis travel distance: 750 mm X-axis speed: 250 mm/s Accuracy: ±0.05 mm R-axis travel distance: 250 mm Robust steel frame construction Hardened ball screw Linear guide system Optionally, the X-axis can be extended up to 1000 mm Back Gauge Fingers 2 pcs Straight type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement European Type Quick Clamping Promecam Upper Die Holder E7 Quick tool change Safe operation Practical and ergonomic design CRONOSS Special Narrow Lower Table 70 mm or 90 mm lower table, depending on machine tonnage T-slot can be applied upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Standard Lower Die ES2067 4-channel V-opening (16-22-35-50 mm) Die angle: 85° Die height: 60 mm Material: C45 Maximum capacity: 80 Ton/Meter B Series Open Housing CRONOSS Premium open housing Black plexiglass protection panels Wide field of view Ergonomic design Single Pedal System (P2) GIVI Linear Scales LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Siemens Drive Energy-saving standby function 2 Standard Sliding Front Support Arms Height adjustable Scale measuring system Operator support system Optional Features CT-BEND Servo Motorized X+R Axis Back Gauge System Fully automatic movement in X and R axes Manual movement in Z1 and Z2 axes X-axis can be extended up to 1000 mm CNC Controlled Motorized Crowning System CRONOSS cam system G.E.C. motorized structure Automatic calculation by CNC More precise and uniform bending Does not require operator intervention AKAS FPSC Front Safety Laser System + Rear Light Curtain CE-compliant safety system Finger protection function Maximum working distance: 4.3 meters Technical Specifications Bending Force: 100 Tons Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 260 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 905 mm Machine Length: 4670 mm Crjdpfjzbrb Ijx Agvsc Machine Width: 2230 mm Machine Height: 2950 mm Approach Speed: 200 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 180 L Machine Weight: 6780 kg Main Motor Power: 7.5 kW Back Gauge X-Axis Speed: 300 mm/s Back Gauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷