Used Transformers for sale (642)

Year of construction: 2023, operating hours: 154 h, condition: ready for operation (used), General Data Measurements width 1690 mm Measurements depth 2785 mm Measurements height 1725 mm Machine weight 4650 kg Control Unit Brand MAZATROL Model SMOOTH Ez Main Drive Number of axis 3 Movement X-Axis Movement 215 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 100 mm Y-Axis Rapid Traverse 10 m/min Z-Axis Movement 605 mm Z-Axis Rapid Traverse 30 m/min Media Air pressure 0.5 to 1.0 MPa Additional Equipment Transformer for Europe (CE) Roller guide with spherical roller bearings SD memory card I/F + USB memory I/F 1 Set of control keys Foundation kit (steel plates) CE Marking (With noise filter) C-axis Positioning 0.0001° Increment 12-Position Turret Lhodpsxirlbefx Ab Uon Y-Axis Control Interface bar feeder This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 min-1, with a motor power of 15.0 kW. It includes a 12-position turret and rapid traverse rates on the X, Y, Z and C axes are 30, 10, and 30 m/min respectively. Contact us for more information about this machine. Application Types Turning

Condition: refurbished (used), functionality: fully functional, working width: 1,200 mm, Schlatter MG900, 1,200mm wide, with 4 x 100kVA transformers, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables. Lhedsvvf T Aepfx Ab Ujn

Condition: new, Year of construction: 2024, operating hours: 40 h, functionality: fully functional, turning diameter over cross slide: 570 mm, turning length: 550 mm, turning diameter: 400 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,900 mm, total length: 3,010 mm, total width: 2,500 mm, turning diameter over bed slide: 570 mm, overall weight: 5,000 kg, bar passage: 87 mm, Equipment: documentation/manual, rotational speed infinitely variable, US wheeler LT300M New machine (stock machine) Further configurations and models from the manufacturer available on request. Equipment: Control: Siemens 828D Siemens drive components Centralized automatic lubrication system External housing Telescopic guideway cover Transformer Control cabinet Operator work area lighting Signal tower LCD monitor Linear guides Servo tailstock Hydraulic chuck Sauter tool turret with 12 driven tools (BMT55) Renishaw tool measurement system Machine operating manual Pneumatic air gun Water gun Oil skimmer Chip conveyor and coolant tank Lsdpfx Asv Eu Areb Ushn Options: Workpiece measurement system Direct measuring systems Oil mist extraction system By equipping the machines with components from the world's leading manufacturers, we can not only ensure the reliability of our products but also provide high-performance and competent service with short response times. Before being delivered to our customers, all US wheeler machine tools undergo comprehensive quality and functionality testing at our premises.

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. machining length : 60 [mm] - Number of cross slides : 6 - Max. production : 75 [parts/min] - Number of independent feeds available : 4 - Normal travel of independent feeds : 45 [mm] - Hirth teeth SPINDLES - Max. bar diameter : 16 [mm] - Spindle speeds : 800 - 8000 [rpm] - Spindle power : 7.5 [kW] - Number of spindle speeds : 16 POWER SUPPLY - Supply voltage : 400 [V] Lodpfsxma Rmox Ab Uehn - Total installed power : 15 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5049 x 1100 [mm] - Machine height : 1615 [mm] - Machine weight : 2700 [kg] EQUIPMENT - CNC : Fanuc - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : IEMCA PRA 40/33/F - Bar holder - Electric transformer

Condition: excellent (used), Year of construction: 2015, Netstal EVOS 5500-2000 Injection Molding Machine Year of manufacture: 2015 Very compact, hydraulic, three-plate clamping unit with encapsulated lubrication system, ensuring an oil-free environment in the mold space. High-precision and wear-resistant linear guides guarantee maximum mold longevity and increased machine availability. The hybrid injection unit features a modular design and a flexible performance package (metering, clamping, injection) that can be adapted to specific applications. The highest plasticizing performance and optimal melt quality are ensured by selecting process-appropriate components. Servo-electric metering drive and state-of-the-art valve technology guarantee energy-efficient operation. Technical parameters Certification: CE in accordance with EU Directive 2006/42/EC (EN 60204, etc.) Mold installation height: 600–1050 mm Injection unit drive: metering axis speed up to 420 rpm, torque 2400 Nm Injection unit Injection speed: maximum dynamics thanks to high-performance servo valve technology Screw: 62 mm diameter, 25.2D length, version B – Three-zone screw made of hardened, wear-resistant tool steel – Injection pressure: 2400 bar – Injection volume: 749 cm³ Clamping unit Ejector force: 123.2 kN Main drive: Eco Powerunit 55 kW – Dual pump system with hydraulic accumulator – High-efficiency synchronous drive – Adaptive control technology for maximum energy efficiency Oil cooling: supply water temperature 35°C Base Cylinder head with open nozzle, prepared for pneumatic control Guide bushing R = 35 mm, through-hole D = 5 mm Mold plate hole pattern: Euromap standard Centering and ejector system Centering on nozzle-side plate: D = 125 H7 x 20 mm (Euromap) Through-hole in moving platen: D = 80 mm Ejector hydraulics positioned on the operator offside Ejector hole pattern: Euromap Ejector controlled Mold hydraulics 4 hydraulic circuits for auxiliary functions (ejector, cores, nozzle pins) Lsdjxl Ul Aspfx Ab Uehn Electrically controlled check valves in circuits A + B Free configuration of functions with position protection Nozzle hydraulics with needle shut-off 4 hydraulic circuits Flow speed and pressure manually adjustable Open/close function Special software: cascade control Pneumatics and cooling Water cooling battery and hot runner circuit – 4-section, switchable Pneumatics: 2x 3/2 valve, capacity 890 l/min Location: on operator offside at nozzle-side platen Electronics / Software / Interfaces Frequency: 50 Hz Power supply: 400V, 3P + N + E, tolerance ±10% (transformer required for larger deviations) Surge protection Mold heating: – 4 circuits at 3.3 kW each – 8 circuits at 0.75 kW each Connectors: HAN 16E for power and sensors, Euromap 14 Sockets: – 2x 16A CEKON (main switch-controlled) – 1x 32A CEKON with RCD (FI) switch Interfaces: – Euromap 15 – full implementation (parts 1–5) – SPC (Statistical Process Control) – Euromap 66 (control of 5 heating/cooling units) – Euromap 67 (robot interface for ejector and hydraulics) External fault signals: 2 inputs in control cabinet Operator identification: PIN

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. Lsdpfx Aoxgtx Dob Ushn The system is available at short notice!

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model OSP-P300S-H Movement Y-Axis Movement 160 Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) Ledpfx Abexg Umpo Ushn 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Lhjdpfevtcviox Ab Usn Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: good (used), Block DTT 10000 Transformer Manufacturer: Block Type: DTT 10000 10000 VA 50-60 Hz Switching Rating: Dyn 5 Code: 9129 IP: 23 Primary: 500 V 12 A Secondary: 399/231 V 380/220 V 361/209 V Lhjdpfx Ajxl Tbveb Uen 15.15 A HxWxD: 580 x 700 x 430 mm Weight: approx. 170 kg Find more items - new and used - in our shop! International shipping costs on request!

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. machining length : 60 [mm] - Number of cross slides : 6 - Max. production : 75 [parts/min] - Number of independent feeds available : 4 - Normal travel of independent feeds : 45 [mm] - Hirth teeth Lhodpfjxma Rgjx Ab Usn SPINDLES - Max. bar diameter : 16 [mm] - Spindle speeds : 800 - 8000 [rpm] - Spindle power : 7.5 [kW] - Number of spindle speeds : 16 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 15 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5049 x 1100 [mm] - Machine height : 1615 [mm] - Machine weight : 2700 [kg] EQUIPMENT - CNC : Fanuc - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : IEMCA PRA 40/33/F - Bar holder - Electric transformer

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 250 h, Since 2021 for customer prints, product demonstrations and trade fair appearances in our possession. Completely ready for use and prepared by manufacturer-certified personnel from IGO3D, Desktop Metal Partner. Can be demonstrated in Hanover, Germany (also remotely via video call). Easy-to-use Additive Manufacturing 2.0 solutions for industrial production — delivering transformative value. Office-friendly metal 3D printing with two steps (Print > Sinter) and eight materials. Key benefits: „ Easy, two-step processing „ User-friendly software-controlled workflow „ Patented smart Separable SupportsTM technology for quick post-processing „ Qualified for eight materials „ Designed for office-friendly printing Lhodpfx Abom Rgzaj Uen „ A trusted system used worldwide with success The easy-to-use Studio System leverages proprietary Bound Metal Deposition™ (BMD), an extrusion-based metal additive manufacturing process where metal rods — metal powder held together by wax and polymer binder — are heated and extruded onto the build plate, shaping a part layer by layer. Once printed, the binder is removed via the debind process, and then sintered, causing the metal particles to densify. The Studio System 2 is even easier to use than ever before with new material formulations allowing printed parts to be placed directly into the furnace without the need for a solvent debind. The result is a streamlined two-step process with a nearly hands-free experience. Eight materials are available, including a range of steels, copper, and nickel and titanium alloys. Simplified metal part production using safe-to-handle bound metal rods The Desktop Metal Studio system creates metal parts for functional prototypes, tooling, jigs and fixtures, and low-volume production applications with expert metallurgy built-in. Easily produce difficult-to-machine parts featuring complex geometries like undercuts and internal channels to optimize metal components in an office setting.

Condition: new, carrying capacity 250 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. Lhsdpenlb Rwsfx Ab Usn * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 100 h, Movement X-Axis Movement 508 Y-Axis Movement 305 Z-Axis Movement 406 Lodpfoxgwdqex Ab Uohn Additional Equipment CT-style tool changer grippers / Standard program memory, 1GB / Spindle speed: 6000 rpm / Convenience Package / Early power failure detection module / Ethernet interface / HaasConnect: Remote monitoring / HaasDrop / Lifting device / User-definable macros / M-code for media playback; M130 / Run in safe mode / Standard 1-year warranty / Tool changer with 10-position carousel / Touchscreen control / Visual part programming system / Wi-Fi connection for the Haas control / Work light / Spindle orientation / Coordinate rotation and scaling / Internal high-voltage non-isolated transformer for 380-480V operation; Non-USA WIPS-R Wireless Intuitive Probe System / AAG Automatic Air Cooling System+ / AUGER Auger Chip Conveyor / AUTO LUBE Automatic Lubrication System / CPH-HF High-Flow Coolant Pump / MIN QTY LUBE Minimum Oil Lubrication System+ / P-COOL Programmable Coolant Nozzle+ / PULSEJET PulseJet System+ / RJH-TOUCH-XL Large Jog Handle with Remote Control and Touchscreen Display+ / RTAP-3 Synchronized Tapping+ / FIO Installation Field Installed Options with+ This 3-axis HAAS TM-0P was manufactured in 2022. It features a 508 mm X-axis, 305 mm Y-axis, and 406 mm Z-axis travel, ensuring versatile machining capabilities. Standard features include a 6000 rpm spindle, 10-position carousel tool changer, and touchscreen control. Additional accessories like the Wireless Intuitive Probe System and Auger Chip Conveyor enhance its functionality. If you are looking to get high-quality milling capabilities consider the HAAS TM-0P machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 36194, feed length X-axis: 800 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 2,000 m/min, spindle speed (max.): 5,000 rpm, spindle speed (min.): 55 rpm, quill stroke: 75 mm, quill diameter: 80 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 5,000 m/min, rapid traverse Z-axis: 2,000 m/min, table length: 1,530 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Universal milling and drilling machine. X 800 mm Y 400 mm Z 450 mm - Heidenhain TNC 620 with ABENE/HEIDENHAIN software for easy operation - 2-speed gearbox with frequency-controlled spindle motor from 55 to 5,000 rpm. - 1 LED machine light, 24 V/70 W - Electronic handwheel HR-510 for the X, Y, and Z axes - Complete electrical equipment for 400 V, 3-phase, 50 Hz. - Transformer for 24 V control voltage. - All fuses in the electrical cabinet are automatic. - Machine longitudinal, cross, and vertical feeds - AC motor spindle, 7.5 kW - Z-axis spindle, 40 mm diameter, ball screw. - Spindle for the X and Y axes, with backlash-free ball screw. Ø 32 mm. - All guideways are hardened and ground. - An automatic central lubrication system lubricates all guideways and ball screws. - AC servo motors with continuously variable control via Heidenhain TNC 620 - Extendable chip tray - Collision protection monitoring in all axes via electronic threshold monitoring - Keys, operating instructions, spare parts catalog, and acceptance report. - Mechanical handwheels in all axes (optional) - Table enclosure - Key switch for selecting between manual and automatic mode. We offer you a machine that is ideally suited for training and continuing education. Our machine is characterized by its robust construction and enables precise machining of workpieces. Ljdpfx Aewf E R Eob Uohn Thanks to its features, it is ideal for use in training workshops or professional development courses. The machine allows you to gain practical experience in CNC manufacturing and deepen your understanding of CNC technology. Our machine is located in our warehouse in Pfullingen and can be inspected at any time. We would also be happy to arrange a test run to demonstrate the machine's capabilities. You will quickly notice how easy and efficient our machine is to operate. We offer the machine at a fair price. Please contact us for further information or to request a quote. We are confident that our machine will meet your requirements and look forward to your inquiry.

Condition: like new (used), Year of construction: 2024, operating hours: 150 h, functionality: fully functional, Under 150 spindle hours!!! Including HAIMER Power Clamp Economic Plus NG shrink fit device, year: 2024 Including tool holders, clamping devices, and tools Manufacturer: DMG MORI SEIKI Model: DMU 50 3rd Generation, Stealth Design Control: CELOS with HEIDENHAIN TNC640 Year: 2024 Lhjdpoxgh H Nefx Ab Ujn Operating hours (approx.): Spindle hours: 140 h, Power-on hours: 790 h EQUIPMENT: - Swivel rotary table, simultaneous - Direct measuring systems and plane transformation in B and C axes - Scraper belt chip conveyor with cleaned gap sieve - Internal coolant supply (IKZ) - Coolant/air blow-off switchable via M-function - Rotating inspection window - Rinsing gun for chip removal - Oil and emulsion mist extractor - Infrared probe, Renishaw Blue Power Probe Kit - Laser tool measurement Renishaw NC4 - Tool length and diameter measurement - Automatic cleaning of the measuring system by air blast - Calibration arbor for tool measurement - 3D quickSET - Quick stop for machine protection, MPC – Machine Protection Control - Automation interface, Profibus M65 - Automatic loading door - Work table with 4-channel rotary feedthrough - Machine-side automation software interface - Electronic handwheel - RMS sensor, internal handling - Digital Manufacturing Package - Messenger V4 - Service Agent - Direct path measuring systems in all axes TECHNICAL DATA: Travel paths: X: 650 mm, Y: 520 mm, Z: 475 mm Clamping area: D630 x 500 Swivel range: -35 to +110° Rotary axis: 360° Rapid traverse: 42 m/min, direct drive Tool holder: HSK-A36, BIG-PLUS compatible, speedMASTER® motor spindle Spindle speed: 20 – 20,000 rpm Spindle power: 35 kW/25 kW (40/100% duty cycle) Spindle torque: 130 Nm/86 Nm (40/100% duty cycle) Tool magazine: 60 slots, incl. setup aid for loading This used machine can be inspected under production conditions. All information without guarantee – sale excludes any guarantees and warranties. Subject to prior sale. Our general terms and conditions of sale and contract apply.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without regripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. tapping diameter: M 6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. tapping diameter: M 3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm C-axis indexing on main spindle: 1° Lhedpexgd Rkjfx Ab Uon Rapid traverses Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive power Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: Min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 x 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Minimum input increment: 0.001 mm Minimum output increment: 0.001 mm (Z) / 0.0005 mm (X) Input mode: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Part ejector and removal unit Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant unit with swiveling spray arms Power chucking system for main and sub spindles

Condition: ready for operation (used), Marchant Schmidt Portable S/S Cheese Cuber with Portable S/S Hydraulic System, Allen-Bradley Micro Logix 1400 PLC with I/O, 2 HP PowerFlex Variable-Frequency Drive, Transformer, Contactors, PanelView Plus 600 Touch Screen HMI and S/S Framed Portable Belt Conveyor: Designed to address concerns about floor loss, wire break detection, cleanable design and inline construction. It remains a critical part of the converting process, producing very clean-cut cubes that create the best shred and dice appearance. The machine can process blocks, wheels, and loose trim cuts. Servo actuators maximize production with a custom profiled movement. This allows the machine to adjust the cut force and speed for each cheese resulting in faster production, fewer wire breaks and better-quality cubes. Interchangeable cutting harps are used to alter the cube size which ultimately changes the shred length. Contact Marchant Schmidt for a quote on an industrial cheese cuber to fit your food processing line. Excellent product containment Lodpfx Abou I R Awj Ushn Electric servo actuators maximize production Combination wire/knife harp for cut quality Wire break detection Easy cleaning with removable sections Urethane belts for better hygiene

Condition: new, carrying capacity 1000 kg number of suction cups 8 suction cup dia. 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. Lhodenlb Rzspfx Ab Uen - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, oil-lubricated rotary vane vacuum pump with a Suction power of 21 m³/h and an ultimate vacuum of 98% (20 mbar). - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: good (used), Year of construction: 2002, Transformer Lhsdpevnifgefx Ab Ujn 400 kVA Own weight: 1410 kg Loading and shipping are possible! Please arrange an appointment for inspection in advance!

Condition: new, Year of construction: 2017, Dry epoxy cast traction rectifier transformer - manufacturer TESAR Italy, power 2800kVA 20(2x±2,5%)/2x0.586kV, Dd0yn11, IP00 (without protection), load level IV (IEC6016), 100%-2800kVA-continuous, 150%-4200kVA-2 hours, 300%-8400kVA-60s, standard losses according to IEC, Al-Al winding, electrostatic screen, dimensions 2.45x1.4x2.7m (lxwxh), weight 7500kg, never used, complete documentation and test report, 6 pcs in stock, year of manufacture 2017, suitable for battery storage systems BESS, can be installed outdoors in case of IP33 protection. Price negotiable Lodpoxlybcofx Ab Ujhn

Condition: used, TECHNICAL DETAILS - Number of axes : 3 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 22 [kW] - Spindle speeds : 3400 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 298 [mm] COUNTER-SPINDLE - Spindle nose : A2-5" - Spindle speeds : 6000 [rpm] - Rapid traverse rate : 10 [mm/min] TURRET 1 - Number of positions : 12 - X/Z stroke : 213/572 [mm] - Tool type : BMT65 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 30 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3630/2290 [mm] - Machine height : 2340 [mm] - Machine weight : 4536 [kg] MACHINE HOURS - Number of hours under power : 622 [h] - Number of working hours : 137 [h] Lhedpfx Abjxlk I Ts Uen EQUIPMENT - CNC : HAAS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Coolant tank - Chips conveyor - Tool probe - Electric transformer - Number of fixed tool holders : 9 - Chuck 3 jaws : 2

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 21220, type of input current: AC, total height: 3,100 mm, total width: 4,000 mm, total length: 9,400 mm, overall weight: 8,600 kg, input voltage: 400 V, type of cooling: water, Resistance spot welding system LASO Tech Systems "WP Welding System" Year of manufacture: 2023 Serial number: 21220 Order number: 11B01 265845 Manufacturer: LASO Tech Systems GmbH, 98527 Suhl Type: WP welding system Total weight: approx. 8,600 kg Dimensions (L x W x H): approx. 9.4 x 4.0 x 3.1 m Rated voltage: 400 V / 3 Ph / 50 Hz Rated power: 138 kVA at 100% duty cycle Main Components: YASKAWA Positioner V2-500D3 L = 1650 Serial number: 466843-1-1 | Year of manufacture: 2022 | Weight: 1,409 kg | Item number: 411503 | Part No.: 148548-100 (Yaskawa Nordic AB, Sweden) Equipment: Servo rotary axis, swivel unit, Penlink rotary union (P/N 365003 – S/N 3197). Total unit weight: approx. 1,500 kg. Project assignment: LASO Tech, Project No. 30101293. Welding cell LASO WP-SLK Steel frame construction with safety enclosure, electrically interlocked access points. Integrated positioning systems (S1 / S2). Controller: LASO industrial PC / Siemens S7 / Robot controller compatible with YASKAWA Motoman. Power supply 400 V / 50 Hz / 138 kVA. Process control for resistance spot welding with cooling water, compressed air, and network interfaces. Full I/O wiring provided. YASKAWA Industrial Robot GP180 with Controller YRC1000 Type: YR-1-06VX180-A00 | Year of manufacture: 11/2022 | Payload: 180 kg | Own weight: 1,020 kg Serial number: 6V22Y2842450001 | Manufacturer: YASKAWA Europe Robotics d.o.o., Kocevje (Slovenia) Controller: YRC1000, type ERAS-1000-06VX280-E10, SN 6V22X2807840001, year: 10/2022 Power: 6.5 kVA, supply: AC 380–440 V, 50/60 Hz | Teach Pendant +RM1 | Integrated safety shutdown. Control Cabinet NIMAK multiCONTROL with Bosch Rexroth PRC7300 Type: PRC7300-L1-01VRS-0105-01-00002-EC-01 | Serial number: 7261404217680 Supply: 3~ 400–480 V / 110 A | Manufacturer: Bosch Rexroth AG, Lohr am Main Year: 2023 | Fully wired with safety modules and EMZ interface. Lhedpfjxlixwsx Ab Uen RSP Tool Changer System Manufacturer: Robot System Products (RSP), Sweden | Type: P8366-150 with tool changer P7501-036 (Sn 0001 / 0002) and docking units P8303A. Pneumatic, coolant, and signal transfer integrated. Connection via RobiFix. Welding Guns Gun 1 – NIMAK LRN 300-650-R54-175-150-P2U-WR Project: 95.011.360 | Machine No.: 2212–2129 N | Weight: 120.5 kg | Year: 2023 Transformer: Expert MF100-530 V-A.01 (SN: T-297432). Coupling: RSP P7501-036 + P8303A. Gun 2 – NIMAK CRN 300-650-R54-200-P2U-WL Project: 95.029.224 | Machine No.: 2212–2128 N | Weight: 109.5 kg | Year: 2023 Transformer: Expert MF100-530 V-A.01 (SN: T-297431). Coupling: RSP P7501-036 + P8303A. Welding Gun Cleaning Station (LASO Special Construction) Free-standing unit on steel base with SEW geared motor (400 V). Two round brushes Ø 180 mm x 150 mm. Condition and Scope of Delivery Entire system built 2022/2023, as new condition. All components including cabling, control cabinets, safety enclosure, and documentation are supplied. Dismantled and transport-secured as agreed.

Condition: good (used), Year of construction: 2008, Ilpra Foodpack FP1402 V/G Serial no: FP6854 (2008) Tray sealer with GasMix GM Series gas mixer, Serial no: 2011/PA/00286 (2011) tooling 3 - across 180 x 250mm external with Busch vacuum pump, reel lift trolley, wall mounted transformer and 4 additional sets of tooling (including 3 - across 180 x 250mm, 3 - across 180 x 280mm, 3 -n across 165 x 200mm). FoodPack 1402 is a fully automatic in-line traysealer suitable for medium to high production, designed to be easily integrated into an automated production line and customisable according to specific production requirements. Lodpfx Aju Tugzob Ujhn Characterized by a compact design, FoodPack 1401 guarantees low running costs and can work in soldering only, vacuum and protective atmosphere. • Hygiene and accessibility: being constructed in stainless steel and in compliance with IP 65 class protection, the FP 1402 is suitable to work in aggressive environments. The working surfaces and the grating doors are made in such a way to prevent water or liquid stagnation. Inspection and washing operations of the machine become extremely simple and quick. • High technology: the changeover is quick and easy; the 1402 machine gets promptly ready to package a different size. The machine is equipped with colour touch screen, combined with simple and friendly-use software (able to store up to 40 different working menus). • Compact design: the 100 m3 vacuum pump is lodged inside the machine, thus reducing the overall dimensions. • Customization: on request, a wide range of options are available to meet as much as possible the customer’s requirements. Main technical data Machine dimensions (mm) 4950 x 900 x 1440 Machine weight (Kg) approx. 750 Installed Power (Kw) 6 Kw, 400 V, 50 Hz Air consumption (bar – Nlt/cycle) 6 bar – 50 lt/cycle Welding Area (mm) 400 x 270 x 120 Output max 15 cycles/min Protection class IP 65

Condition: new, carrying capacity 500 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. Ledpfx Abjq Sc Auo Ujhn * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: excellent (used), Year of construction: 2005, Manufacturer: Quaser (Taiwan) Model: MV154P/12 Control: CNC Fanuc 18 M Year of manufacture: 2005 Operating hours: 7,500 h Equipment: Chip conveyor, through-spindle coolant (IKZ), spindle chiller, filter, transformer, documentation Machine condition: Good. X-axis travel: 760 mm Y-axis travel: 530 mm Z-axis travel: 560 mm Ledpfsxk Ttvox Ab Ujhn Table length: 900 mm Table width: 500 mm Workpiece weight: 500 kg Tool changer: 24 positions Spindle taper: 40 Max. spindle speed: 12,000 rpm