Used To Mature for sale (80)

Condition: used, LDS Type: V875 Shaker System V875-440 LPT600C with amplifier SPA40K Shaker for medium forces Technical data: Armature dimensions: 440 mm Headexpander 850 * 850 mm Sinusoidal force vector 35.6 kN (peak) Sine force vector 35.6 kN (effective) Shock force vector 106.75 kN (peak) Frequency range 5 to 3000 Hz Test specimen mass max.600 kg Acceleration max. 1078.7 m/s² Speed max. 1.8 m/s Deflection ± 25.4 mm Vibration tests: Sinusoidal Noise Shock Amplifier SPA40 Sliding table: Fpodpeuxcugsfx Afion WxHxD mm : 1400 mm x 1250 mm x 2200 mm Work surface: 600 mm * 600 mm Thickness of the top : 37 mm Weight of the top: 27.4 Max load : 500 kg Condition : gebraucht / used weight: Shaker approx. 2200 kg Blower 181 kg Amplifier: 622 kg Sliding table 4760 kg Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2024, condition: new, Super Dumbbell – the ultimate punching knife with replaceable precision cutting blades Super Dumbbell has a spring type ejector, is equipped with 5 sets of precision spare blades and therefore represents a set of six punching knives in total. It is ideally designed for manual and pneumatic presses. Excellent price-performance-ratio “6 knives for the price of 1” Replaceable precision cutting blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum cut resistance • Easy replacement • No regrinding • No downtime • Ultra-thin symmetrical cutting blades minimize concave test specimen cross sections (Fig. 1) Fodpfx Afoki Tqcjijpn • No more premature tearing of the test bars • Up to 10 % higher tensile strength or elongation at break values • Extremely smooth cut surfaces of test specimens (Fig. 2) • Always available separately Guarantee for: • High-precision test specimens • Reliable and reproducible test results Ideally suited for: • High polymer materials such as rubber, plastics, etc. • Standards of all kinds, such as ISO, DIN, JIS, ASTM, IEC, etc.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AP-10, type of input current: three-phase, input voltage: 380 V, total width: 7,000 mm, total length: 23,000 mm, nominal power: 20.5 kW (27.87 HP), electrical fuse: 60 A, Mašina za ispravljanje i sečenje armature – Centralni deo mašine je instalisane snage u kW u zavisnosti od modela – Uz mašinu se isporučuje odmotač nosivosti 3t. (vitlo) sa pneumatskom kočnicom – Automatski sto za odlaganje gotovog proizvoda 6 m – Tačnost mašine je ±2mm. – Mašina je automatska Fpedpfswyaywox Afion – Brzina mašine je od 50-100m/min – Uz mašinu dolaze: dva seta čaura za ispravljanje, dva para noževa i dva para mernih valjaka. Oprema na mašini ● elektro oprema u ormanu Schneider ● svi ležajevi u mašini su FAG ili SKF

Condition: excellent (used), -Dimensions: 610x780x1410 mm -Output: 12–40 L per hour -Serial No.: 1807850/2350 Fpedpswxu Sfjfx Afisn -Year: 2008 -Voltage: 400 V -Power: 4.6 kW -Weight: 280 kg This pasteurizer mixes, heats, cooks, pasteurises, cools, matures, freezes, and preserves your recipes in a single, fully automatic cycle managed by the AUTOFRIGOR programmable logic controller (similar to Carpigiani, Bravo Tritico...), with no transfers or manual handling, ensuring maximum hygiene. All-stainless-steel construction Model: PG 24.60 Condensation: — Output per cycle: 4 to 10 litres Hourly output: 12 to 40 litres Electrical power (400/3/50): 5.2 kW Dimensions (L x W x H in cm): 61 x 78 x 141 Net/gross weight (kg): 250/280

Condition: new, Year of construction: 2024, Helical washer, spiral tunnel for small parts like bolts, screws, joint and small metal parts. Industrial parts washer for mass production, ideal solution for chip and oil removal. Perfect parts washing systems for degreasing and precise cleaning. Operation Principles: Work pieces are washed rinsed and dried with detergent and pressurized hot water spray in helical conveyor tunnel. Application Areas: -Machined parts like rivets, nuts, bolts, screw etc. -Textile accessories as zip, button, snap, fastener etc. -Fittings and equipments for gas regulators, hot water pipes lines, natural gasline etc. Fpjdped I E Irefx Afion -Sanitary Industry; fittings and armature Processes: -Spray wash -Spray rinsing -Drying All of the HELIWASHes are tailor-made and have lots of options according to your needs. Please feel free to contact us for technical details.

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, number of seats: 29, gearing type: automatic, emission class: euro6, brakes: retarder, Equipment: ABS, air conditioning, navigation system, parking heater, Shaula in der Wunschfarbearbe des Kunden erhältlich. Mercedes Benz Chassis Sprinter 519 CDI 1,950 cm3 190 PS Electric mirror 5 kW Standheizung Euro 6E G9 Automatics EABS ASR ESP9 AAS EBV LDWA Rain sensor Adjustable steering wheel Tempomat Fahrerklimaanlage Wheelbase 4325 mm Diesel tank 75 liter Ersatzrad Wheelbase 4325 mm Chrom-Radkappen MB comfort driver's seat with armrests and 3-point harness Air suspension on the rear axle ECAS with height adjustment Fahrzeugabmessungen: 7,900 mm long, 2,390 mm wide, 2,930 mm high Total weight: 6,800 KG Standard Ausrüstung: Großer Heckkofferraum (3 m³) mit Elektroantrieb Digital VDO trip recorder Driver's window electrically operated and controlled Halogen spotlights for driver and guide Electric front sunshade Stauraum für Fahrer links, zusätzliche Stauräume im Armaturenbrett MB Multimedia Mbus mit 7-Zoll-Monitor, Radio-DAB-Rückfahrkamera, Fahrermikrofon Zugang über elektrische Eingangstür der Marke Massats Nottür rechts mit Trittstufe 27 luxuriöse Passagensitze mit Zwei- und Dreipunktgurten und verstellbarer Rückenlehne Side rack with separate service compartments Seitenvorhänge entrance mats made of rubber Panoramic double-glazed windows, extra dark-glazed Konvektionsheizung, linker und rechter Sensor unter dem Sofa MB parking heater 5KW Webasto Klimaanlage Santana LTM-21 passenger compartment Innenbeleuchtung 2-stufig mit blauer Nachtbeleuchtung LED stairway lighting at the entrance Halogen spotlight at entrance LED backlights Standard paintwork in RAL color Front door handle and climate control box painted in car paint Back compartment Roof hatch with notice passage MB-Außenspiegel beheizt und elektrisch betätigt Recovery signal, fire extinguisher, first aid box, hazard warning light MB-Werkzeugsatz und Handbuch auf Niederländisch Nothämmer und Notausgänge Fpodpfstp Sghjx Afisn Beifahrersitz

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor Fodpfxsrgtd Hj Afijpn -Manufacturer: Ankerwerk Nuremberg AEG, geared motor with brake -Gear: Armature movement CAM 76 N 1 i= 33 -Speed: 43 rpm -Engine: AEG type AM 80 N4 -Power: 0.75 kW / 1400 rpm -Shaft: Ø 32 x 78 mm -Dimensions: 525/240/H275 mm -Weight: 50 kg

Condition: used, Year of construction: 2019, Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to 4 bar Connections & fittings: 2 lifting lugs Ladder support CIP tube with top spray ball and 2x butterfly valves NW40 Drain valve NW40 with cap and chain Bottom discharge valve NW40 with cap and chain Sight glass level tube (rigid acrylic, graduated in liters) Probe port (PT-100 sensor) Sampling valve Safety valve (calibrated at 3 bar) Mounting: Adjustable feet   Fpedswkfwpspfx Afijn

Condition: excellent (used), DEMAG Hub Motor 36/24 K6P for Electric Wire Rope Hoist P2000 / P1600 Available with coupling and brake disc on request Type 36/24 K6P, in very good condition Fpedpfx Afov Uai Ajijn Armature / Rotor / Runner, end shields, coupling, and brake also available separately

Condition: used, Year of construction: 2006, No. 10022 Stationary single-shaft shredder Doppstadt DW 2560 E1 Used, year of construction 2006 Fpedpfx Aswh T D Esfijn Overhauled by Doppstadt in 2024 (new shaft / new gearbox / new bearings / etc.) Since overhaul approx. 100 operating hours Electric motor Approx. 23000 operating hours The scope of delivery includes a conveyor belt The machine was used for bulky waste and wood Filling width 1900 mm / filling length 3060 mm Motor: Manufacturer T-T Electric / type DC motor LAK 4250 C / power 315 kW / rated speed 2000 rpm / armature voltage 460 V / armature current 721 A / field voltage 340 V / field current 14.8 A / degree of protection IP 55 / cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: Roller / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Longitudinal belt: length 7800 mm / width 1000 mm / discharge height 1680 mm / speed 1.8 m/s Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Sale on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 Fsdju Idvwjpfx Afijpn total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: ready for operation (used), functionality: fully functional, The MEYN Oil Filter is designed to ensure efficient and continuous filtration of the oils used in your cooking processes. Thanks to its high-performance recirculation system, it improves the quality of your fried foods while extending the life of the oil. Impurities are quickly captured, preventing premature deterioration of the fats. This also helps preserve the texture and color of finished products, even during intensive use. Furthermore, this oil filter integrates easily into various production lines. Its compact and mobile design facilitates its installation, even in confined spaces. Furthermore, cleaning and maintenance are simplified, reducing downtime and technical interventions. This improves your efficiency without sacrificing the quality of your production. This filtration system is suitable for several types of fryers and applications, whether for poultry, snacks, or vegetarian products. Furthermore, it helps improve your profitability by limiting oil waste and reducing the costs associated with frequent cooking liquid replacement. Ultimately, choosing the MEYN Oil Filter means investing in a durable, reliable solution that meets the strict requirements of the food industry. Technical specifications: Fpedownc D Uepfx Afisn Filtration flow rate: up to 500 l/h Stainless steel structure: food hygiene guaranteed Compatible with: MEYN lines and other brands Continuous filtration: without production shutdown Estimated weight: ± 150 kg depending on configuration

Condition: used, Dirt trap, flanged dirt trap, filter, coarse or fine sieve, coarse filter -Manufacturer: AW Armaturen Wolff, coarse filter corner shape Fedpfxsipwb Ss Afijpn -Type: AW 603.0 PN 2.5 DN 300 GG25 603300 -Sieve plate mesh size: Ø 2mm material VA -Dimensions: 700/50/H533 mm -Weight: 163 kg

Year of construction: 1983, condition: good (used), functionality: fully functional, STC-Ref:G-391-0007 Wupa SP-6.3 ,Year: 1983 format: 1420x1020 mm equipped: - double waves FE- waves - double waves FB- waves - double waves EB- waves - grammature 600 g/m,² - 1200 g/m² - Gauge 0,15 - 6 mm - knive size 995 x 1390 mm - type: WUPA PS 6.3 - double waves FF- waves - paper size min. 59 x 70 cm - paper size max. 99,5 x 139 cm Fpjdpfx Aewl Udnefisn - C- flute corrugated device - F flute corrugated device - W flute corrugated device - E- flute corrugated device - B- flute corrugated device - MABEG feeder --> available: immediately

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details Wort yield: 1,000 liters per brew Heating system: Steam Current status: Installed and ready for operation Availability: Immediately Scope of delivery  Brewhouse | Mini Brewery System | CI T 10 | 2012 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Steam boiler | Mini Brewery System | - | 2012 (electric) Plate heat exchanger Hot water tank | 1,500 L Reverse osmosis system | ALFA | compact model | - Capacity: 150-200 L/h 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 Cooling jacket & bag system for optimum beer preservation Fpodpfxev Da Dls Afien

Condition: used, Year of construction: 2006, No. 10024 Stationary single-shaft shredder Doppstadt DW 2560 E1 Used, year of construction 2006 Fpjdpfx Aowh S I Njfisn Overhauled by Doppstadt in 2024 (new shaft / new gearbox / new bearings / etc.) Since overhaul approx. 500 operating hours Electric motor Approx. 20000 operating hours The scope of delivery does not include a conveyor belt Filling width 1900 mm / filling length 3060 mm Motor: Manufacturer T-T Electric / type DC motor LAK 4250 C / power 315 kW / rated speed 2000 rpm / armature voltage 460 V / armature current 721 A / field voltage 340 V / field current 14.8 A / degree of protection IP 55 / cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: Roller / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Sale on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. Fsdpfx Aeu Idv Dsfiepn *

Condition: new, "Properties: Bending radii: R10 to R200 (min. R= 1.8xD) (depending on the wall thickness, the material and the pipe diameter) Max. Bending speed: 2 rpm and 3.2 rpm without inverter Fpsdpfx Afjuudrksien Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30 per 9 bends Control: NC1 Bending direction: counterclockwise Effective length (available in different lengths as required): 1,5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Weight: approx. 600 kg (with 3m mandrel) NOTE: The price quoted refers to a length of 1.5 m. Other lengths available on request! Premature mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Performance: Hard copper and aluminum : 60 x 4 mm Steel tube : 60 x 3 mm Stainless steel : 60 x 2 mm Scope of delivery: Machine Standard accessories (e.g. foot switch, operating instructions, 2 hex, 4 sets of chuck jaws, bending grease, 25 mm mandrel bar) Delivery without hydraulic oil"

Condition: new, The 9D717 balancing machine is a versatile and reliable tool for balancing a wide range of rotors from 15 to 1500 kg. This machine is capable of balancing different types of rotors, including inboard and outboard cantilever rotors, rotors on special mandrels and rotors in their own bearings. The machine's design is simple yet functional, allowing it to easily balance armatures, generator rotors, impellers and fan wheels, even with large initial imbalances. In addition, the machine can balance rotors in their own bearings, saving repair time and preventing damage to the rotor trunnions. It is suitable for determining and eliminating unbalance on rotors of electric motors, metallurgical gears, screws and printing equipment. The 9D717 balancing machine is also capable of balancing disc-type parts such as impellers and smoke pump impellers, as well as correcting unbalance on shaft-type parts such as threshing drums and combine rotors. Overall, this machine is highly versatile and effective in balancing various types of rotors, making it ideal for repair and production shops. HIGHLIGHTS • The specially designed rollers use advanced patented “Exact Barrel” grinding technology and are mounted on precision bearings. • The monolithic design of the supports and base eliminates vibration losses during balancing by reducing the number of "oscillating system" elements. • Allows large initial unbalances to be measured without destroying the machine, and rotor unbalance to be corrected directly on the machine. • The low natural resonance frequency of the supports allows the rotor to be balanced at low speeds. • The width of the support rollers and roller block allows the installation of rotors with very short rotor bearing journals. The modular design allows rotors with unusual configurations to be mounted using spacers or tools. • The height of the roller block is adjustable, allowing rotors with different journal diameters to be balanced. • The belt drive has a patented "Long stroke" design that allows any rotor to be rotated using only two drive belts. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. Fsdpfx Afepdpn Uoijpn MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. SPECIFICATIONS Weight range of balanced rotors 15 - 1500 kg Maximum rotor diameter (above the bedding) 1800 mm Distance between centres of rotor supports 360 – 3000 mm Support type Rollers Transmission element for rotor rotation Belt / Cardan Minimum achievable residual specific unbalance 0.4 g*mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 7.5 kW Parameters of the supply network 380V, 3 Ph, 50Hz Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: good (used), Schröter maturing chamber for 160 trolleys Fsdpfx Aerb A Nrsfijpn

Condition: used, Year of construction: 2014, Overview This ETD ISO AGI brewing system was manufactured in 2014 and has a capacity of 3,000 liters. It is heated by steam and allows for temperature steps during mashing. The seller is offering the line for sale due to going out of business. The entire line is still in the owner's factory and can be inspected on site. The included steam boiler (Tecnivap Alfa 200) was last functional, but the seller cannot guarantee its current condition. Maintenance and inspection are recommended. Technical details Capacity: 3,000 L Heating system: Steam (certified installation required) Average filtration time: 1-2 hours for 2,500 L Scope of delivery  Brewhouse | ETD | ISO AGI | 2014 2x isobaric fermenter Helical pump Steam boiler | Tecnivap | Alfa 200 Isothermal storage tank for matured beer Steam installation Wort cooler Reverse osmosis system Boiler water tank Dosing pump Fpsdpfxov Az E Uj Afijn

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 500/30, type of input current: three-phase, overall weight: 2,400 kg, power: 64 kW (87.02 HP), We offer a complete solution for recycling waste materials/by-products with our APM/500/30 Compact pellet line. With this, you can convert waste materials into various usable products, such as: fire pellets, feed pellets, poultry litter, manure pellets. etc. We have more than 20 years of experience in this industry. This machine is a mature technology that allows you to work quickly and efficiently, we produce all its parts ourselves and the supply of parts is continuous. We are a European Union company. We have production lines in Canada, the Netherlands, Belgium, Poland, Hungary, Slovakia, Romania. We can manufacture machines according to all relevant CE, UL, CLA standards, upon request We have resellers in Canada and Belgium For production, you can use, for example, sawdust, alfalfa, straw, sunflower seed hay, etc. The maximum moisture content of the raw material for pellet production is 15% The advertised APM 500/30 compact pellet line includes the following units and can produce 0.5 T/h pellets: 1. Hammer mill 2. Conditioner, 3. Pellet press, 4. Pellet cooler, 5. Big-bag packaging unit 6. Automatic control cabinet Fpsdpfxsht U Hxe Afisn 7. Conveyor belts. The price is 68,000 euros We also have 1 ton/h pellet lines for 123,000 euros called APM 500/30 Compact Tandem, and the APM 500/30 Compact can also be expanded later on if needed The pellet line is ready for use within 2-3 hours after delivery! If you are interested in the equipment, write an e-mail or call us

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm Fpedpfxeu Idxrj Afion dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Year of construction: 2012, operating hours: 8,000 h, condition: used, functionality: fully functional, Complete equipment for brewing, fermenting, and maturing beer, with the capacity to make batches of between 1,000 and 3,000 liters. The brewery and fermenters are Czech-made and date back to 2012, while the maturation tanks were produced in 2018 in the Netherlands. Fpedpswixrqofx Afisn All equipment has been in operation to date without any issues. The equipment consists of the following inventory: 1. Brewery, consisting of a mash tun, kettle, and whirlpool. 2. Steam generator. 3. Plate heat exchanger. 4. Hot water tank. 5. Reverse osmosis equipment. 6. (x4) 1,250 L fermenters. 7. (x5) 500 L horizontal maturation tanks. This entire brewery has a sales price of €80,000. Excluding the five horizontal maturation tanks, the asking price is €58,000. More information can be found in the attached document 'brewpub-sale-document' and in the first 44 images. ----- Additionally, we offer beer fermentation tanks, entirely made of stainless steel. All accessories are included. Currently in operation. 8. (x2) 3,200-liter fermenters - unit price €7,500 9. (x2) 2,400-liter fermenters - unit price €6,000 10. (x6) 1,150-liter fermenters - unit price €4,500 More information can be found in the attached document 'fermentation-sales-document' and in the last six images. We would consider selling the fermenters and maturation tanks separately.

Condition: used, Year of construction: 2014, Overview  This isobaric fermentation cellar system consists of 8 isobaric fermenters with 20 HL each and is ready for immediate use. The tanks are designed for the precise fermentation and maturation of beer and were manufactured between 2014 and 2020. They can be purchased either complete or in two partial packages. Technical details  Manufacturer: SK Group & Céspedes Year of construction: 2014-2020 Capacity: 20 HL per tank Max. Pressure: 2,5 BAR Tank division: Package 1: 3 tanks from SK Group (2014) Package 2: 5 tanks from Céspedes (2016 & 2020) 2 tanks from 2020 3 tanks from 2016 Scope of delivery 8 isobaric fermenters (20 HL, 2.5 BAR, 2014-2020) Sold as a complete system or in the above-mentioned partial packages Fodpfx Afevx R H Tjiepn