Used Three Jaw Chuck Drill for sale (14,525)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard Iodpfxsq Exh Sj Ahyeih -Jaw width: 34 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/136/H80 mm -Total weight: 7.0 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Recess: Ø 200 mm Iiodpoduacyefx Ahyjh -Bolt circle: 3 x 226 mm -Passage: Ø 76 mm -Weight: 25 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm Iedpfx Aedrwmdshyoih -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm Iijdpfx Ahsduacvoysh -Weight: 22 kg

Condition: new, 4 – Lathe chuck, unused Diameter: 400 mm Iijdpfed Idnwox Ahysh Mounting: KK 8 (140 mm) Through-hole: 125 mm Interchangeable jaws Height: 140 mm Weight: 62 kg

Condition: used, overall weight: 260 kg, Material: steel Diameter: 710 mm Spindle bore: 150 mm Iiodpsyxgf Rsfx Ahyeh Spindle speed: 400 RPM Weight: 260 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: FD Friedrich Deckel, three-jaw chuck, chuck size Ø 85 mm -Bolt circle: Ø 73 mm / M5 Ijdpfx Ajzlcu Sohyeih -Passage: Ø 16 mm -Dimensions: Ø 85 x 53 mm -Weight: 1.4 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 200 mm -Recess: Ø 162 mm -Bolt circle: 3 x 180 mm Ijdsduacpopfx Ahyjih -Passage: Ø 52 mm -Weight: 13 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 32 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/130/H70 mm -Total weight: 5.4 kg Ijdelg H Nlspfx Ahyoih

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Iijdpfey E T Dgsx Ahyeh Good condition

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Dimensions total: 130/136/H80 mm -Total weight: 7.3 kg Iiedpfx Ahew Dp Thjyjh

Condition: excellent (used), Four-jaw spiral chuck Diameter 315 mm Chuck height, flange 125 mm Short taper bore, size 6 Taper diameter 106.39 mm Pitch circle diameter for studs 133.4 mm 4 studs, M 12 Accessories: 1 chuck key 1 set of hardened boring jaws 1 set of hardened turning jaws Iiodpfx Ahelguy Sjyeh Weight 103 kg Shipping dimensions: W 800 x D 600 x H 550 mm

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Rohm, base jaws for four-jaw chuck 2 set -Type: ID.: 107546 jaw width 20 mm -Dimensions: see photo techn. drawing -1 set: with soft top jaws, width 30mm -Price/sale: only complete Iiodpfsglwmyex Ahyjh -Dimensions: 200/90/H70 mm -Weight: 4.7 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 250 mm -Bolt circle: Ø 225 mm -Passage: Ø 76 mm -Dimensions: Ø 250 x 110 mm -Weight: 25 kg Isdpfx Ajzlcp Aohyjih

Condition: excellent (used), SCHUNK SVP-2 201760 TRIBOS S clamping device Iiedpfxozhrfxo Ahyoh SRE reducing inserts Z7 (10 pieces) In very good condition.

Condition: good (used), four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm / M10 -Jaw width: 20 mm / interchangeable jaws not included -Dimensions: Ø 190 x 70 mm Iiodpfx Ahov U N Etjyoh -Weight: 8.5 kg

Condition: used, Two Forkardt faceplates Diameter 200mm Iiodpfx Aocurfyohyoh 2 BHE 200 Short taper diameter 106.4 mm = Size 6 Bolt circle diameter 133 mm

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4 pieces, hard, 2 sets -Jaw width: 25 mm -Dimensions: see photo techn. drawing Iisdpfjglwmgsx Ahysh -Price/sale: only complete -Dimensions: 200/90/H55 mm -Total weight: 4.1 kg

Condition: good (used), four-jaw chuck, 4-jaw chuck Iodpfxsv Tlu Ue Ahyoih -Four-jaw chuck: chuck size Ø 310 mm -Passage: Ø 98 mm -Bolt circle: Ø 290 mm -Jaw width: 26 mm / interchangeable jaws not included -Dimensions: Ø 310 x 90 mm -Weight: 24 kg

Condition: excellent (used), Year of construction: 2010, Four-jaw chuck 27974 Diameter 250 mm Iiodofimg Hjpfx Ahyeh 4 individually adjustable jaws Mounting: Long taper, diameter 80 mm with external thread 125 x 3 mm Keyway 10 mm Overall length with flange and jaws 193 mm Weight 29 kg Age is estimated.

Condition: used, Power chuck, 3-jaw wedge bar lathe chuck, type presumably Duro 1802W-411592 Chuck No. K W-411592 Outer diameter: 180 mm Inner diameter: 45 mm Thread connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 5000 rpm Max. clamping force: 3000 daN Base jaw dimensions (L x W x H): 64 / 74 x 20 x 29 mm - 1 set of chuck jaws consisting of base jaws and reversible hard top step jaws - 1 set of chuck jaws consisting of base jaws and reversible soft top step jaws - 3 sets of soft top jaws Weight: 21.5 kg Ijdpfx Ahoxcbmhsyjih Good condition Additional sets of top jaws available under stock number 62056

Condition: good (used), Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Röhm, four-jaw chuck Ø 200 mm Iiodpfx Astxklyohyoh -Passage: Ø 55 mm -Bolt circle: Ø 133 mm -Mounting: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Accessories: incl. 2 sets of interchangeable jaws and clamping tool -Dimensions: Ø200 x 185 mm -Weight: 24 kg

Condition: used, Jaw plates, various designs Iedpfx Ahob I Sdxoyoih from 300 mm to 500 mm.

Condition: used, 4-Jaw indexing chuck AROWA TYPE Ø 380 NO. 11 Diameter: 380 mm Inner diameter: 135 mm Chuck mount: Short taper, size 8, DIN 55027 with 4 mounting bolts M16 Iisdpfezin Apex Ahyoh Taper mount: Ø 139 mm - Indexing chuck with centrally adjustable jaws - 1 set of jaws with inward steps Weight: 84 kg Good condition

Condition: good (used), Threading chuck, tap chuck, tapping chuck, drill chuck, collet chuck, quick-release drill chuck Iijdjx H N Rlspfx Ahysh -Manufacturer: FRONTAL ABW, Quick-release drill chuck, MK3 mount -Type: 5-20 mm -Dimensions: Ø 75 x 257 mm -Weight: 2.9 kg