Used Tenon Cutter for sale (3,188)

Condition: refurbished (used), functionality: fully functional, Equipment: documentation/manual, Hello, we are offering a Thieme TSC 130 squeegee cutting machine that has been completely overhauled in our workshop. It is suitable for a maximum squeegee length of 1300 mm. In this system, the squeegee blade is trimmed thinly using a very fast-rotating special knife under a water/alcohol mixture. This is necessary if the squeegee blade has not been installed perfectly flat or if the edge of the squeegee blade is damaged and no longer prints cleanly. The advantage of cutting compared to squeegee grinding is: the rubber does not get hot and melt. You always get the same, defined edge, and virtually anyone can do it. The system is suitable for classic screen printing squeegee blades. It is not suitable for RKS squeegee blades or carbon squeegees. The system is currently located in our warehouse/workshop in 93476 Blaibach. We would be happy to take care of transport, etc. Nwodpezyc T Refx Af Sel If you have any questions, please do not hesitate to contact us.

Condition: like new (used), functionality: fully functional, overall weight: 3,500 kg, Year of construction: 2023, operating hours: 8 h, 3 units available Dimensions: 4,284 x 1,100 x 1,903 mm (L x W x H) Operating weight fully equipped: 3,500 kg Transmission: hydrostatic Engine power: 54.6 kW Engine: Kubota V3307 CR-T EW03 Njdsyyigmjpfx Af Sowl Digging capacity: 50 to 500 m/h Working depth: 200 to 630 mm Working width: 80 to 140 mm Control: Remote control with proportional servo controls (PPC)

Condition: excellent (used), SIZING-TENONING LINE, composed of the following machines: A) Loader (portal/bridge) double pick-up station "SAG" CAR MS 2000 with central motorized rollers conveyor and 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. Nwsdpfjzzzupox Af Sjl B) 1st Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 C) Turning Station "SAG" Mod. Girapannelli (from lengthwise to crosswise) with double cone system. D) 2nd Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 E) Turning Station "SAG" Mod. Girapannelli, (from lengthwise to crosswise) with double cone system. F) 3rd Double-End Tenoning-sizing Machine "ULMADAN" Mod. 1136 H) Stacker (portal/bridge) double stacking station "SAG" CAR/S MS 2000 with central motorized rollers conveyor and 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Year of construction: 2020, condition: used, module 4 diameter 180 mm Bore diameter 40 mm width 67 mm 5 Nodpfx Asz Dburef Sswl weight 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request

Condition: new, functionality: fully functional, Year of construction: 2026, Tilting Spindle Moulder CORMAK WS1000TA is a technologically advanced machine designed for professional woodworking in carpentry, furniture and production workshops. With a tilting spindle, a large cast iron table and a precise tool guidance system, the machine enables efficient and accurate machining of straight and profiled wooden components. Main advantages of the machine Tilting spindle from +5° to -45° – allows for bevels, rebates and special shapes to be machined. Large, heavy-duty cast iron table – ground and polished for smooth glide and work stability. Four-speed spindle control: 1,800 / 3,000 / 6,000 / 9,000 rpm – flexibility for various materials and tools. Rigid steel frame structure – ensures vibration damping and precision even under heavy load. Spindle stroke 100 mm and maximum tool diameter 180 mm – suitable for a wide range of cutters. Precise spindle and stop adjustment – enables accurate machining and dimensional repeatability. Easy tool change – optimised spindle access reduces setup time. Construction and technology The CORMAK WS1000TA spindle moulder is designed for durability and functionality in serial production. The machine body is made of thick-walled steel sheets, ensuring rigidity and resistance to deformation. The main table 1,000 × 360 mm and optional sliding table 1,000 × 240 mm allow efficient handling of long workpieces. The motor power 2.8kW (S1) / 3.9kW provides the energy needed for solid wood and wood-based materials machining. Precision and performance Nwsdpfxjycu Awj Af Sjl The machine allows for precise milling operations, including angular machining. The tilting spindle enables non-standard operations, while the accurate column spindle guide eliminates play and improves surface finish. The V-belt transmission ensures quiet and stable operation across the full speed range. Applications The CORMAK WS1000TA spindle moulder is ideal for: professional carpentry workshops, production of door and furniture components, machining of tenons, grooves, rebates and decorative profiles, angled and curved milling with a suitable attachment. Standard equipment 30 mm spindle Side and top pressure hold-downs Precision milling fence Curved milling attachment Angle stop User manual CE Declaration of Conformity Optional accessories* Sliding table (1,000 × 240 mm) – shown in the photos Mechanical feed systems Special protective covers and guiding systems *The price quoted applies to the machine only, excluding optional/additional equipment, installation, transport and training — please contact our consultant for more details. Technical data Spindle diameter [mm] 30 Spindle speed [rpm] 1,800 / 3,000 / 6,000 / 9,000 Spindle stroke [mm] 100 Table dimensions (L × W) [mm] 1,000 × 360 Sliding table dimensions (optional) [mm] 1,000 × 240 Table height [mm] 900 Max. cutter diameter [mm] 180 Spindle tilt [°] +5 to -45 Motor power [kW] 3.9 Motor power S1 100% [kW] 2.8 Weight [kg] 270 Warranty [months] 12 User manual included

Condition: excellent (used), Year of construction: 2010, Automatic four-side cutter (4 blades) Nwodpfx Afoxbhzcs Sjl Working area 2300x620

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Nodpfx Aozr Nb Sof Sswl Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)

Condition: used, Year of construction: 2007, Maximum workpiece length: 4,200 mm Maximum workpiece thickness: 100 mm Number of slitting spindles: 2 Number of profiling spindles: 3 Horizontal spindles: 3 Horizontally controlled spindle Separate gear spindle Cut the flange Slitting spindle length: 600 mm Profiling spindle length: 600 mm Synchronized spindle length: 600 mm Gear spindle length: 80 mm Constant stroke height: 40 mm Total spindle stroke: 540 mm Spindle diameter: 50 mm Tool orbit circle for profiling: 220 mm Tool orbit circle for slitting: 350 mm Continuous spindle stroke Radial spindle adjustment, pneumatic Electronically controlled longitudinal stop Angled window Adjustment to minimize miter gap Chip guard during folding, synchronized spindle Workpiece return: Longitudinal conveyor Main motor: 11 kW Maximum feed rate: 90 m/min Feed rate, continuously adjustable Control: Program control Control: PC control Compliance marking: CE mark Nwsdpfoz A Enmsx Af Sol

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 10108, cutting length (max.): 2,900 mm, cutting width (max.): 530 mm, CASATI BIG 2600 - Double knife veneer scissors. Machine is 100% functional. Nwjdpfjum Rpgox Af Sjl

Condition: excellent (used), Year of construction: 1979, Deckel FP2 Aktiv tool milling machine with 3-axis Heidenhain TNC 111 Aktiv digital readout. The machine is in very good condition and comes from a state training department. Fixed table, SK 40 spindle taper. Accessories: various collets and arbor holders, tailstock. Very good, ready-to-operate condition. Can be demonstrated under power by arrangement. Nodpexyhmvsfx Af Sjwl

Condition: used, Marel I-Cut 36 Portion Cutter The Marel I-Cut 36 portioning machine has been specifically developed for the precise cutting of uniform portions. This machine is ideal for portioning and slicing meat, fish, and poultry. The I-Cut 36 is a highly efficient slicer capable of making up to 1,000 cuts per minute. The machine is height-adjustable, allowing it to be easily integrated into an existing production line. Nwedpez Dg Sisfx Af Ssl Its hygienic design ensures that the product only comes into contact with the cutting chamber, knife, and conveyor belt. This portioning slicer is completely manufactured from stainless steel. Production capacity: Up to 1,000 cuts/min Maximum product dimensions: 900 × 300 × 150 mm Belt speed: 20–500 mm/s Accuracy: 97–98% Program memory: Up to 84 programs Cutting angle: 45° and 90° Conveyor belt working width: 300 mm Infeed and outfeed height: 1,010 mm Voltage: 400 V (3 + N, 50 Hz) Power: 8 kW Weight: 875 kg Year of manufacture: 2010 Machine dimensions (W × D × H): 2,380 × 1,310 × 1,480 mm

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Nodpfx Ajyk Ip Tjf Sowl Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm max. module min. module total power requirement 3 kW weight of the machine ca. 4,2 t Nwjdpfx Afot Hwnvs Sol dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: A-251101 + A-251102, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 12 mm, type of input current: three-phase, control voltage: 24 V, input frequency: 50 Hz, input current: 4 A, year of last overhaul: 2026, cutting height (max.): 150 mm, A-251101 Slicer: For sale: Item A251101. Holly Slicer, painted frame and stainless steel body. Machine information: Total machine length: 1.9 meters Total machine width: 1.0 meters Total machine height: 2.1 meters Machine working height: 0.9 meters Machine capacity: 1800 loaves per hour Electrical information: Power connection: 400 volts, neutral and earth. Power consumption: 3.2 kilowatts. Plug connection: CeeForm 5-pin 16 Amp. (round red plug.) Compressed air: Not required. Minimum and maximum product dimensions: Products from 100 to 320 mm long. Products from 80 to 210 mm wide. Products from 40 to 150 mm high. Machine version: Frame made of painted steel, RAL 7046. Deck, stainless steel ASI 304 and plastic rollers and 2 side belts, manufacturer Hoba. Band slicing machine, mounted on nylon wheels. A-251102: Semi-automatic packaging line. Item A-251102 Refurbished semi-automatic (manual) packaging line equipped with a blowing table, Kwik Lok brush machine, and clip-closing machine. Semi-automatic (manual) painted packaging line equipped with a Kwik Lok brush machine, type 1082, a Kwik Lok clip-closing machine, type 871A, and a bag-opening blowing table. Machine direction of operation: left to right Machine information: Total machine length: 3.5 meters Total machine width: 1.5 meters (including blowing table) Total machine height: 1.8 meters Working height: 0.75 meters Length of conveyor section: 1.8 meters Length of roller conveyor: 1.0 meter Conveyor flight spacing: 305 mm Machine capacity: 1800 packages per hour Nwodpfx Afjz Ervps Sel Electrical information: Power supply: 400 V, N + PE Connected load: 1.2 kW Plug type: CEE-Form, 5-pin, 16 A (round red plug) Compressed air required: No Minimum and maximum product dimensions: Product length: 100–350 mm Product width: 80–210 mm Product height: 40–160 mm Machine description: The frame and both leg assemblies are manufactured from painted profiles, manufactured by Waterlander. The machine is equipped with a Kwiklok brush machine, model 1082, and a Kwik Lok clip-closing machine, model 872, year 1995 (completely rebuilt), suitable for Kwik Lok JNRP clips and Schutte clips. At the end of the packaging line, a 1-meter-long roller conveyor is provided for manually removing the packaged products. The machine is mounted on wheels and is equipped with conveyor flights with a fixed transport speed. The machine is fitted with a completely new control system and has been fully refurbished. The machine is finished with a two-component, high-durability topcoat. The machine is suitable for packaging food and non-food products in plastic bags. Included: with the machine, a painted Hoba blowing table, stainless-steel top surface, and product guides.

Condition: used, Year of construction: 1954, functionality: fully functional, machine/vehicle number: 541000, total height: 1,700 mm, total length: 1,200 mm, total width: 1,200 mm, overall weight: 815 kg, table length: 700 mm, table width: 70 mm, disc diameter: 150 mm, - Year of manufacture: 1954 Nedpfxoxnimtj Af Sswl - Fully functional, powered, ready for demonstration - Grinding wheels Ø150 mm - Cross travel: 300 mm - Longitudinal travel: 450 mm - Table size: 700 x 70 mm / tiltable - Grinding spindle tiltable in Z, X, Y axes - Machine dimensions: 1700 x 1200 x 1200 mm - Weight: 815 kg - Factory No.: 541000 Accessories: - Swiveling dividing head - Swiveling vice - 2x dressing diamonds - Grinding wheel holders - Approx. 15 diamond/CBN grinding wheels - Various grinding wheels - Collets Ø1 – Ø20 mm

Condition: new, Year of construction: 2026, For sale is a high-quality Robland multi-combination machine. This unit integrates several woodworking functions in a compact and extremely robust design—ideal for workshops, joineries, or ambitious woodworkers. General Data: + Weight: 560 kg + Motor power: 3 kW (4 HP) Circular Saw: + Saw blade diameter: 250 mm + Speed: 4500 rpm + Max. cutting height: 85 mm + Swivel range: 90° – 45° + Sliding table: 1450 mm + Rip fence cutting width: 655 mm + Extraction ports: 100 mm + 60 mm Spindle Moulder: + Spindle diameter: 30 / 32 / 50 mm / 1¼" + Spindle speeds: 3000 – 6000 rpm + Max. tool diameter: 180 mm + Max. tool height: 120 mm + Travel: 140 mm + Tilting up to 90° Nedsy Nyquepfx Af Sjwl + Optional tenoning hood up to 250 mm + Extraction port: 100 mm Planer & Thicknesser: + Cutter block diameter: 70 mm + Cutter block speed: 5500 rpm + Working width: 310 mm + Planer table: 1320 x 310 mm + Thicknessing height: up to 230 mm + Number of knives: 3 + Tersa cutter block + Planer knives: 310 x 25 x 3 mm + Feed speed: 6 m/min + Extraction port: 100 mm + Mortising unit (optional) + Drill chuck: 0 – 16 mm + Travel: 165 x 140 mm + Drilling depth: 85 mm Location: 39340 Haldensleben Price: €5,750 net

Condition: used, functionality: fully functional, overall weight: 2,800 kg, Year of construction: 1996, Rock/Excavator-mounted milling cutter Cutting head diameter x width: 750 x 1,500 mm 76 cutting tools Maximum operating pressure: 300 bar Nodpfx Afoz Az S Is Sowl Cutting force: 60 kN

Condition: like new (used), Year of construction: 2023, machine/vehicle number: IV68/ IV78 /V88, functionality: fully functional, operating hours: 30 h, Professional Cutter Set for Spindle Moulder / Edger – Double-glazed Timber Frame, Like New For sale: complete set of interchangeable carbide cutters from Lehmann – Caul (Tool Experience), used only 3 times for manufacturing IV68 timber frames. This lot includes a full range of carpentry tools suitable for profiling and machining double-glazed timber frames: ✔ Opening cutters (A1, A2, A3, A4, A8, A9, A10) ✔ Fixed frame cutters (B1, B2, B3, B5, B6, B8, B10) ✔ Complementary/Counter-profile cutters (C1, C2, C4, C5, C8) ✔ Special tooling (e.g. D4) ✔ Professional-grade reversible carbide knives ✔ Several reducing rings All tools are fully compatible and modular—no missing parts for standard timber frame manufacturing. New value: €15,340 (with invoice) — 🔹 Condition: Excellent / barely used 🔹 Bore: 60 mm (majority of cutters) 🔹 Diameters: from 197 mm to 353 mm depending on model 🔹 Suitable for industrial spindle moulders, production optimized Why this is an opportunity: ✨ Complete ready-to-use set ✨ Condition like new ✨ Perfect for professional joiners or manufacturers ✨ Immediate productivity boost ✨ High new purchase value — Who is this for: ✔ Timber joiners ✔ Door and window manufacturing workshops ✔ SMEs or craftsmen seeking a professional-grade set ✔ High-end tool collection Further information: Nwodox Dmgiepfx Af Sol 📍 Collection in person possible 📦 Professionally packed for shipping 📸 Detailed photos available on request

Condition: good (used), Code: 0477 Brand: EMME ELLE - ITALY Model: T.O. 3200 - CE Standard Hydraulic veneer guillotine for joinery, furniture, doors, window and door frames, slitting and other applications – CE Standard Technical data: Sturdy construction The hydraulic power unit controls the movement of the cylinders to move the pressure plate and the blade Cutting length 3220 mm Cutting height 100 mm Electrically operated rear stop – Max depth 750 mm – Min depth 20 mm Power unit pump motor 7,5 Hp Rating motor 0,75 Hp Safety photocells Weight kg 4300 Nwedpfxezzq Rae Af Ssl

Condition: used, WEINIG UNITEC 10 tenoning and slotting machine from a UC-Matic window production line, not in working order. Technical data: Nwodoztv Axjpfx Af Ssl - Year of manufacture: 1997

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: serie nr 3149, overall weight: 11,800 kg, total width: 6,615 mm, total length: 8,890 mm, total height: 2,050 mm, spindle diameter: 50 mm, type of input current: three-phase, space requirement length: 16,000 mm, space requirement width: 8,000 mm, milling spindle length: 650 mm, compressed air connection: 8 bar, spindle speed (min.): 3,500 rpm, spindle speed (max.): 3,500 rpm, length stop: 3,450 mm, input voltage: 125 V, power: 65 kW (88.38 HP), main saw diameter: 450 mm, corner unit for window and door frames, including tools. controlled from the office (Groeneveld). interpolation (angled pins). barcode laser. return transport. documentation available. complete sets of spare blades/saws, including router bits, linked to Groeneveld. automatic counter-piece. maximum workpiece length 6000. sticker printer for barcode. Nwsdpfeztptqox Af Sol automatic waxelite pump. automatic central lubrication. connections for pin holes and counter-molds. automatic length stop and rotation for workpieces. including extraction pipes with automatic valve. thicknesses from 38 to 150 mm. pin bank: 1x saw blade 40mm. 2x pin shaft 50x650. 2x edge breaker 30x40. router: 1x rounding router 30x40. 3x router bits 50x600. machine can be picked up here; in conjunction with Bos Machines (dismantling and transport not included in the price). price excludes VAT.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SA106560, overall weight: 7,500 kg, total width: 2,970 mm, total length: 3,460 mm, total height: 2,200 mm, spindle diameter: 350 mm, type of input current: three-phase, space requirement length: 7,000 mm, space requirement width: 5,000 mm, milling spindle length: 600 mm, space requirement height: 2,600 mm, length stop: 3,400 mm, input voltage: 380 V, There are two separate machines that can operate independently from each other but also work together. We only produce windows on the SAC F30; for doors, we use the FS.05 and the F30 together. We also have a tooling set that can produce window profiles in four thicknesses: 58/68/78/88 mm and, optionally, 108 mm, from the Italian manufacturer Fantacci. It comes with a large number of spare cutting plates. All digital and paper drawings are available with order numbers for the spare cutting plates, etc. New blades can be easily ordered from Fantacci in Italy. Dust extraction pipes are included, along with pneumatic valves and automatic control. Additional software with unlimited time access allows you to design a window, door, or sliding door and send the production file directly to the machine. All information about the machine, including electrical/pneumatic layout drawings, a spare parts catalog, etc., is available. The machine will be available from 08/2026. You can see the machine in operation at our facility until 20.08.2026. If you are interested, we will provide additional information on how the machine works (1-2 days of training). You will need to arrange the transport yourself, but we will load the machine onto the truck. Prices are exclusive of VAT. Njdpfozq Sr Rjx Af Sjwl SAC F30 2-4 angle machine = €40,000.00 SAC FS.05 drilling machine = €14,000.00 (If both machines are purchased together, the combined price is €50,000.00) Cutting tool set, including spare cutting plates = €8,500.00 Dust extraction with automated pneumatic valves is included free of charge, as is the Ramasoft software license.

Condition: used, Year of construction: 2008, total width: 2,400 mm, total height: 2,500 mm, total length: 8,000 mm, Colour: Grey Empty weight: 8.000 kg Track: 8000x4500mm Travel: 6000x2500mm Sheet-thickness: 2-40mm plasma, 150mm autogeen Off-line software: Libellula Many belongings and consumables. Without exhaust-system - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Drive system: CNC - Resonator brand: Precision - Resonator type: Plasmarc 401 - X-axis travel [mm]: 6000 - Y-axis travel [mm]: 2500 - Table length [mm]: 6000 - Table width [mm]: 2500 - Max. material thickness [mm]: 40 - Options: Offline software, Oxy-fuel cutting - Control type: Vision 52 - Transport dimensions: 8000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Nodpfxsz Aipqj Af Sswl VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2014, operating hours: 10,083 h, condition: used, functionality: limited functionality, We are selling a water jet from the Czech manufacturer PTV. It has been non-functional for 4 years now. Surplus stock. Nwsdpoxnm R Nefx Af Ssl

Condition: used, Year of construction: 2001, Automatic tenoner 1 saw diameter 500 mm 2 plate-type spreaders Njdpfx Aez Dfw Dof Sswl 2 ball bearings with a diameter of 40 mm Pneumatic pressers Automatic carriage advancement Digital display Speed variator Total power 35 kW 400 V Weight 3500 kg Price sold as is without overhaul