Used Tb 175 for sale (8,535)

Condition: excellent (used), Year of construction: 2006, Screw diameter: 15 mm Dedpfx Aoxzzrzob Tola Clamping force: 125 kN Minimum installation height: 77 mm Weight: approx. 1,500 kg

Condition: good (used), Year of construction: 2015, lifting height: 20,350 mm, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 3.460 kg Functional Lifting capacity: 200 kg Working height: 2.235 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 7,25x2,1x3,01 Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Dlsdpfexbq E Dsx Ab Tea Model: TB 220.2 Year of build: 2015 Condition: Used Data: Max. working height: 22,35 m Max. platform height: 20,35 m Max. reach: 14,00 m Total dimensions LxWxH: 7,25 x 2,10 x 3,01 m Platform dimensions LxW: 1,38 x 0,68 m Max. basket load: 200 kg Swivel range: 225° Ground pressure: 27 kN (vorne) / 16 kN (hinten) Ground clearance: 0,25 m Support width vertical: 2,10 m (vorne) / 2,10 m (hinten) Support width one side: 2,78 m (vorne) / 2,75 m (hinten) Support width both sides: 3,48 m (vorne) / 3,33 m (hinten) Support length: 3,95 m breit/ 2,98 m schmal Own weight: 3.460 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket, maximum tilt angle 5°, loading area with side boards, automatic return to base position, lift automatic. Information: Tüv and UVV new Location: 41468 Neuss immediately available

Condition: good (used), functionality: fully functional, power: 35 kW (47.59 HP), gearing type: automatic, fuel type: diesel, overall weight: 3,500 kg, operation weight: 3,500 kg, Year of construction: 2010, operating hours: 3,900 h, Takeuchi TB 235 Year 2010 Dlodpjx A Urwjfx Ab Tea Approx. 3900 operating hours Martin Powertilt Hydraulic quick coupler Auxiliary hydraulics 3 buckets Very good original condition Delivery possible

Condition: used, Year of construction: 2006, operating hours: 6,424 h, Equipment: all wheel drive, Telescopic Work Platform, Snorkelift, 4x4 All-Wheel Drive, Working Height 17 m Dlsdpfxoxpbmue Ab Tja - Snorkelift - Model: TB-50DZ - Working height: 17.4 m - Platform height: 15.4 m - Lateral outreach: 12 m - Year of manufacture: 2006 - Hour meter reading: 6,424 h (read-off) - 2-section telescopic steel construction - Powered by Deutz 3-cylinder diesel engine - 2 driving speeds - Tire size: 12-16.5 - Tread depth: 12-15 mm - Wheelbase: 2,400 mm - Drive configuration: 4x4 - Overall dimensions: 7,550 x 2,450 x 2,350 mm - Weight: 6,432 kg - Basket load capacity: 227 kg - Rotating basket - Steel basket construction - Basket dimensions (L x W x H): 2,340 x 550 x 1,100 mm - Basket and ground controls - Generator We are happy to provide further details and additional photos upon request. This description does not constitute a binding offer and may contain errors. No guarantee for all information provided. Please also visit our homepage.

Condition: used, Year of construction: 1992, functionality: unexamined, Table height adjustment via handwheel Round grinding table Travel device Djdjx At Nnspfx Ab Tela

Condition: used, functionality: fully functional, machine/vehicle number: 380850, Double bench grinder for sale Dlsdpfex Aruvjx Ab Toa

Condition: used, functionality: fully functional, power: 77 kW (104.69 HP), fuel type: diesel, empty load weight: 10,800 kg, Year of construction: 2014, operating hours: 7,688 h, drive type: Diesel, Wheeled Excavator Technical condition: good Front tyres condition: 20 - 40% Rear tyres condition: 20 - 40% Dsdpfexy D Dkjx Ab Tola Description: Takeuchi TB 295W Wheeled Excavator – Year 2014 – 7,688 operating hours – 10.8 t operating weight – hydraulic quick coupler – POWERTILT – 1 pcs nearly-new 100 cm ditch bucket – 1 pcs used 40 cm ditch bucket – 1 pcs 150 cm grading bucket – 4-cylinder ISUZU turbo diesel engine 104 HP – air conditioning – long dipper stick – tyres approx. 30% – good original condition – Quick coupler, buckets, 3rd valve, 4th valve, heater, full cab, air conditioning,

Condition: good (used), Year of construction: 2015, lifting height: 24,800 mm, fuel type: diesel, Empty weight: 3.340 kg Lifting capacity: 230 kg Working height: 2.680 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Transport dimensions (LxWxH): 6,78x2,09x2,97 Please contact Christian Theißen for more information Dlsdpfoxc Hmtsx Ab Toa Manufacturer: Ruthmann Model: TB 270 Year of build: 2015 Condition: Used Data: Max. working height: 26,80 m Max. platform height: 24,80 m Max. reach: 14,80 m Total dimensions LxWxH: 6,78 x 2,09 x 2,97 m Platform dimensions LxW: 1,39 x 0,70 m Max. basket load: 230 kg Swivel range: +/- 225° Ground pressure: 29/19 kN Ground clearance: 0,20 m Support width vertical: 2,09 m Support width one side: 2,77 m (in front)/ 2,72 m (rear) Support width both sides: 3,51 m(in front)/ 3,31 m (rear) Support length: 3,95 m broad/ 2,97 m narrow Own weight: 3.340 kg Special features: Rotating work basket, socket in the work basket, motor on/off switch in the work basket, grounding possible, automatic setup and retraction, memory function. Location: 41468 Neuss immediately available

Condition: used, From € 1.320,00 now for € 660,00. Now with a 50% discount. This is a pallet offer of 240 per euro pallet. Used plastic stacking bin measuring 400 x 280 x 175 mm, a capacity of 10 litres. The bin is both nestable and stackable, allowing smart storage when in use or not. When empty, the bins can be easily nested together, Dodow Sw A Eepfx Ab Tela

Condition: used, Year of construction: 2007, operating hours: 5,186 h, Equipment: all wheel drive, Telescopic boom lift, Snorkelift, 4x4 all-wheel drive, working height 17 m Dledpfx Ajxngzbsb Tsa Snorkelift, * Model: TB-50D7 * Working height: 17.4 m * Platform height: 15.4 m * Lateral outreach: 12.4 m * Year of manufacture: 2007 * Hour meter reading: 5186 * 2-stage telescopic steel construction * Powered by 3-cylinder Deutz diesel engine * 2 driving speeds * Tire size: 12-16.5 * Tread depth: 12-15 mm * Wheelbase: 2400 mm * Drive configuration: 4x4 * Overall dimensions: 7550 x 2450 x 2350 mm * Weight: 6,432 kg * Basket load capacity: 227 kg * Rotating basket * Basket made of steel construction * Basket dimensions (L x W x H): 2340 x 760 x 1100 mm * Basket and ground controls Further data and additional pictures available upon request. This description does not constitute a binding offer and may contain errors. No guarantee on all specifications. Please also visit our homepage.

Condition: excellent (used), Year of construction: 2013, KAESER TB19 compressed air refrigeration dryer, with energy-saving SECOTEC control system. Year of manufacture: 2013 Technical specifications: Flow rate: 2.10 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +43°C Max. compressed air inlet temperature: +55°C Compressed air connection: G 1" Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 108 kg Power supply: 230 V / 1 / 50 Hz Location: from stock, 54634 Bitburg Dljdpewmxb Tefx Ab Toa - available immediately -

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 15 mm throat 185 mm bore stroke 60 mm turning speeds 240 - 4500 U/min 290 x 225 mm total power requirement 230 kW / Volt weight of the machine ca. 130 Kg Dedjxz Sbgepfx Ab Tsla dimensions 0,7 x 0,7 x 1,8 mm Bench drill - Frequency converter - Base

Condition: reconditioned (used), KELLENBERGER 600 U 175 is a cylindrical grinder of high precision, offering accuracy and reliability. Capacities: centre height 175 mm, between centres 600 mm; wheel Ø350×50 mm, bore 127 mm; wheelhead 270°. Specs: wheel speeds 1500–3600 t/min (4 steps); work spindle 20–400 t/min (stepless); table tilt 10°, up to 6 m/min; supply 3×380 V 50 Hz; wheel motor 4 CV; weight ≈2200 kg; dims 3000×1750×1600 mm. Accessories: digital readout (2 axes), tailstock fine adjust, internal grinding attachment, wheel guard, safety device, sliding door. Suited to tight tolerances in automotive, watchmaking, machine tools, aerospace and medical sectors. Dljdpfx Asxx U H Tsb Tsa

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: AL 175 Dairy, AL 175 Dairy DMZC Drop through valve Easy detachable with slide rails Dlodpfxjxz Dvpe Ab Tea Execution Dairy Additional Easy detachable with slide rails ATEX ATEX Equipment USDA DRY cleaning ATEX internal II1D ATEX external II3D ATEX marking c T120 °C BVS03 ATEX H044 X (2014/34/EU) Internal polish Product contact surfaces Ra=0.8 μm Rotor Interference Detection (RID) ATEX 3GD incl DMN Controller and Zener barrier D/MZC Rotor Fixed vane rotor 8 blades chamfered and radiused pockets stainless steel Rotor Product contact surfaces Ra=0.8 μm Shaft sealing SAS Sanitary air purge seal PTFE FDA approved Capacity at 100% filling [l/rev] 5.50 Rotor speed [rpm] 20 Drive Direct drive with coupling Drive SEW RF37 EDRS71M4/TF 3GD 0.37kW 20 Rpm PTC's and Forced cooling fan IP 66, 220..575 V 50/60 Hz Drive Food grade oil USDA-H1 SEW Price is for each valve

Year of construction: 2025, condition: used, New: Yes Empty weight: 75 kg Djdpju Ex Uiofx Ab Tjla CE mark: yes Serial number: DPX-27506 Transport dimensions (LxWxH): 1x0,6x0,3 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: excellent (used), functionality: fully functional, Used Kellenberger cylindrical grinding machine for sale in very good condition. Price significantly reduced !!!!! Dlodpfoxzi Htox Ab Toa

Condition: good (used), Wood lathe Djdpfei Akv Ssx Ab Tola Length: 1750 mm Motor power: 3 KW Voltage: 380 Volt Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2020, condition: used, New: Yes Empty weight: 412 kg Dledpfx Aoxzcaasb Toa Working width: 175 cm Required tractor power: 35 hp

Condition: ready for operation (used), Flott TB 13 ST Drilling Machine / Bench Drill - Clamping table: 225 x 295 mm - Spindle mount: with drill chuck - Throat depth: 185 mm - Speeds: 400-5000 rpm - Column: Diameter 60 mm - Spindle stroke: 60 mm, depth stroke with fine adjustment - Motor power: 0.5 kW - Dimensions: 380 mm x 225 mm x 745 mm (L x W x H) - Weight: 50 kg You are welcome to arrange a viewing. Dsdexzbylspfx Ab Tjla We are happy to arrange low-cost shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: good (used), Year of construction: 1990, 1 x tool grinding machine Doebelie D 175 combination grinding Year of manufacture: 1990 with coolant system. + machine lamp The machine can be inspected under power. Dlodpfsxza Nxox Ab Tja

Condition: used, Year of construction: 2023, operating hours: 622 h, Equipment: all wheel drive, JCB JS 175 WT-SV wheeled excavator, year of manufacture: 2023, model year: 2024, operating hours: only 622 hours!, adjustable boom, 1 backhoe bucket, heated seat, heating, hammer line, reversing camera, dozer blade, outriggers, engine: JCB ECOMAX [129 kW/175 HP], weight: 19,200 kg, good condition, ready for immediate use. We can provide you with a leasing or financing offer upon request. Mr. Mihm (Tel. +49 1 81 22 800) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted! _____ JCB JS 175 WT-SV wheeled excavator, year of manufacture: 2023, model year: 2024, operating hours: only 622 hours!, adjustable boom, 1 backhoe bucket, heated seat, heating, hammer line, reversing camera. dozer blade, claws, engine: JCB ECOMAX [129kW/175hp], weight: 19,200kg, good condition, ready for immediate use, Djdpfx Abewmt Dpe Tsla On request, we can make you a leasing or financing offer, Mr. Mihm (Tel. will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale!

Condition: new, Technical data for the pallet rack traverse: Shelving system: Mecalux The scope of delivery includes: 01x pallet rack traverse, new Material color: RAL 2001 orange Traverse type: TB-S 100 Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Clear width: 1,825 mm Max. load per pair of traverses 2,000 kg, with evenly distributed load 02x integrated locking pin, new To secure the longitudinal beams against accidental lifting Currently available in stock: approx. 404 pieces Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Dodpfevvifpjx Ab Tela General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: reconditioned (used), Year of construction: 2018, operating hours: 3,625 h, Year of manufacture: 2019 Operating hours: 3,700 Mileage: 39,500 km Technical Data: Max. working height: 27 m Outreach: 18.10 m Max. lateral outreach: 15 m Basket load capacity: 250 kg Permissible leveling inclination: 5° Dodpfx Aov I T Rmob Tola Work platform size: 1.40 x 0.70 m Work platform load capacity: 250 kg Carrier vehicle wheelbase: 3,665 mm Slew range: 2 x 225° 3 movements possible simultaneously: lifting, slewing, telescoping + basket rotation +++NEW PRICE €189,500.00 net plus 19% VAT+++ This offer is non-binding. No guarantee for equipment details. Errors, changes, and prior sale excepted.

Condition: new, pressure: 175bending length: 4050column width: 3550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 4790x2290x3030weight approx.: 13,2504 axes (Y1, Y2, X, R): Ja alle Achsen über Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Steuerung Esa S630 (2D Grafik Steuerung)motor power: 22Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Dlsdpfx Asd Ehidjb Toa

Condition: new, pressure: 175bending length: 3020column width: 2550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 3700x2230x3025weight approx.: 12.0504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Esa S630 (2D Grafik Steuerung)motor power: 22Standard Equipment: KKI EUROPA XL CNC Press Brake by KK-IndustriesKK-Industries proudly serves as the official representative of the DENER Group, offering a high-quality model tailored for the European market. The KKI EUROPA XL CNC Press BrakeThe KKI EUROPA XL, manufactured by DENER, is a robust and highly precise press brake designed for universal applications. With its superior installation height and extended stroke, the EUROPA XL is built to meet the demands of a wide variety of tasks. Its large projection minimizes limitations, ensuring a versatile and efficient operation. Quality and PrecisionAt KK-Industries, we prioritize quality, and this is evident in the exceptional features of the EUROPA XL. The press brake comes equipped with the DELEM DA 66 T control system as standard, offering intuitive operation and advanced functionality. The EUROPA XL features CNC axes (Y1, Y2, X, and R) as standard, enabling precision control over every aspect of the bending process. The CNC crowning system, integrated into the DELEM DA 66 T, ensures optimal alignment and consistent results across all bends. Top-Quality ToolsIn addition to the advanced control system, we ensure that the KKI EUROPA XL is equipped with the finest tools available. The upper tool and die are sourced from EUROSTAMP in Italy, guaranteeing outstanding quality and durability for every application. Service ExcellenceAt KK-Industries, we understand that a machine is only as good as the service it receives. That’s why we prioritize highly qualified personnel with extensive experience in CNC sheet metal working. Our team ensures that your KKI EUROPA XL operates at peak performance and receives the support it needs to excel. Djdpfx Aefrvw Ijb Tela