Used Tank With Agitator for sale (12,981)

Condition: used, tank capacity: 7,000 l, GENERAL Equipment: Disc valve, crane lugs Design: upright Outer diameter: 1,800 mm Insulation: available Agitator: propeller Ljdpfxexqdaae Ahvjhd Stand type: feet Location: outdoor storage Volume: 7,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,500 mm TANK Number of feet: 3 pcs INSULATION Insulation jacket: welded Insulation material: rock wool Insulation thickness: 50 mm EQUIPMENT Manway / dome: on top Outlet: available AGITATOR 1 Agitator arrangement: eccentric in top plate

Condition: used, tank capacity: 6,500 l, GENERAL Equipment: Spray head, crane lugs Design: upright Remarks: 1 dent in the cylinder Inner diameter: 1,940 mm Overall height: 3,900 mm Agitator: Jet mixer Lhjdexqc Uvepfx Ahvjd Base type: Height-adjustable legs Volume: 6,500 liters Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,000 mm Previous use: Food (syrup) TANK Number of legs: 3 pcs EQUIPMENT Manhole / dome: in the cylinder, in the top head Outlet: pipe end approx. Ø 50 mm Note: Outlet pipe cut off MATERIAL SPECIFICATION Legs material: stainless steel AGITATOR 1 Agitator arrangement: side-mounted on cylinder Agitator equipment: jet mixer agitator (pipe for mixing tank contents using an associated pump)

Condition: used, tank capacity: 14,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Insulation around top head and cylinder, not around bottom head; spray head connection slightly bent and weld seam on the top head cracked; discharge pipe internal diameter approx. 50 mm, widens towards its cut-off end to approx. 65 mm Speed: 13 / 26 rpm External diameter: 2,700 mm Internal diameter: 2,480 mm Total height: 4,100 mm Insulation: present Power: 1.5 / 2.2 kW Agitator: beam agitator Agitator component: agitator flange Type of stand: height-adjustable feet Location: Bremen Lhodexqc S Ujpfx Ahved Volume: 14,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,350 mm Last application: Dairy TANK Number of feet: 4 pcs INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manhole / Dome: in cylinder (approx. 350 x 450 mm) Outlet: present MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 2 Agitator arrangement: side-mounted on cylinder AGITATOR 1 Voltage: 400 Volt Bottom bearing:

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Features: Air/ventilation system, disc valve Design: vertical Speed: 0 - 85 rpm Internal diameter: 820 mm Total height: 1,850 mm Power: 0.75 kW Max. viscosity: 5,000 mPas Top: agitator traverse with folding lid Agitator: blade agitator Base design: PE base Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, assembly instructions, operating manual Nameplate: Volume: 550 liters Product-contact material: V2A 1.4301 (AISI304) Condition: factory-new Cylindrical height: 1,034 mm TANK Max. permissible operating temperature: 80°C EQUIPMENT Lhodpfx Aoxqc S Ijhvod Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: marbled Internal surface: high gloss Material of feet: plastic AGITATOR 1 Voltage: 400 V Agitator arrangement: eccentric in top plate Agitator features: NORD frequency inverter 400V IP55 NORD helical gear unit made with latest aluminum technology Gear unit with stainless steel seal flange and oil leakage indicator Gear unit filled with food-grade Klüber oil Gear motor unpainted

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Spray head Design: upright Remarks: 1 dent in the inner tank (overpressure from the non-functional heating jacket; see photos); insulation jacket with minor dents and partially detached panels; tank has interior residues; mounts for load cells under the feet (3 loose load cells are included in the scope of delivery; these were not considered in the total height specification) Speed: 52 rpm External diameter: 1,900 mm Internal diameter: 1,790 mm Total height: 4,150 mm Agitator manufacturer: Jongia Insulation: available Power: 0.37 kW Agitator: paddle agitator Agitators: 3 agitators Agitator element: propeller Support: feet Location: Bremen Volume: 5,000 liters Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,100 mm Last application: food TANK Number of feet: 3 pcs Lhsdpfx Aoxqc Sbjhvod INSULATION Insulation jacket: bolted Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: 48 mm MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 2 Agitator arrangement: off-center in the top head Speed: 450 / 965 rpm Voltage: 400 V Power: 1.1 / 4.4 kW AGITATOR 1 Agitator manufacturer: Jongia Voltage: 230/400 V Agitator arrangement: central in the top head Agitator equipment: Propeller 3: agitator data no longer reliably readable; probably 460 / 920 rpm

Condition: used, tank capacity: 60,000 l, GENERAL Lhsdpfx Aexqdphehvsd Features: Ventilation, Spray Head, Crane Lugs Design: Upright Remarks: Tank feet serve as spacers for substructure/foundation. Small internal repair areas present External diameter: 3,610 mm Internal diameter: 3,500 mm Total height: 7,200 mm Insulation: Present Top: Conical top Agitator: Propeller Location: Outdoor storage Volume: 60,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 6,500 mm Previous use: Food industry TANK Bottom: Flat bottom with slope EQUIPMENT Manhole / Dome: In cylinder Outlet: Present Outlet: 80 mm AGITATOR 1 Agitator position: Side-mounted on cylinder

Condition: used, tank capacity: 30,000 l, GENERAL Equipment: aeration/venting, spray head, crane lugs Design: vertical Internal diameter: 2,980 mm Total height: 7,700 mm Insulation: yes Power: 1.5 kW Agitator: propeller Support design: height-adjustable feet Location: outdoor storage Volume: 30,000 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 4,300 mm TANK Bottom: conical bottom INSULATION Lhjdpfxsxqdmao Ahvjd Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on the top cover Outlet: DN50 flange TECHNICAL DATA / DIMENSIONS Ground clearance: 1,900 mm AGITATOR 1 Voltage: 380 V Agitator arrangement: eccentric, on the top cover

Condition: used, tank capacity: 6,700 l, GENERAL Design: upright Remarks: Residues from previous product present inside (tanks originate from the coffee industry); External diameter: 1,850 mm Total height: 3,700 mm Agitator: propeller Support type: feet Location: outside storage Volume: 6,700 liters Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,540 mm Previous use: coffee industry Lodpfx Ahsxqda Hsvehd TANK Number of feet: 4 pcs EQUIPMENT Manhole / dome: on top (DN 500) Outlet: DN50 DIN 11851 MATERIAL PROPERTIES Feet material: stainless steel AGITATOR 1 Agitator position: eccentric in top head

Condition: used, tank capacity: 22,000 l, GENERAL Features: Venting/inlet and outlet Design: upright Remarks: Tank with dents; 1 foot pressed into the base (see photos) Speed: 1435 rpm Inner diameter: 2,490 mm Total height: 6,150 mm Power: 5.5 kW Agitator: Propeller Stand type: Height-adjustable feet Location: Bremen Volume: 22,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 4,480 mm Last application: Fruit juice industry TANK Number of feet: 4 pcs EQUIPMENT Manhole / Dome: on the cylinder, on the top head Note: Outlet cut off Outlet: 60 mm Lsdpoxqc Trjfx Ahvshd MATERIAL SPECIFICATIONS Foot material: Stainless steel AGITATOR 1 Voltage: 400/690 Volt Agitator arrangement: side-mounted on cylinder

Condition: used, tank capacity: 200 l, GENERAL Equipment: Disc valve, spray head, control cabinet (no guarantee) Design: upright Notes: According to the previous operator’s label, the tank has a max. operating pressure of 1.1 bar; 1 dent in the insulation jacket; insulation cover of the lower bottom and counterweight of the lid made from steel; hand lever of the outlet valve is missing Speed: 16.5 / 32 rpm Lodsxqc Naepfx Ahvshd Outer diameter: 920 mm Inner diameter: 790 mm Total height: 1,700 mm Insulation: available Power: 0.88 / 1.3 kW Top: removable / hinged top cover Agitator: anchor agitator Mounting: mobile on castors Location: Bremen Nameplate: Volume: 200 liters Condition: used Cylindrical height: 580 mm Last application: pharmaceuticals TANK Lower bottom: flat bottom with slope Number of feet: 4 pcs INSULATION Insulation jacket: hermetically welded Material of insulation jacket: stainless steel EQUIPMENT Outlet: 45 mm MATERIAL SPECIFICATION Material, top cover: AISI304 (V2A) 1.4301 Material, cylinder: AISI316 (V4A) 1.4401 Material, lower bottom: AISI316 (V4A) 1.4401 Material, feet: stainless steel AGITATOR 1 Voltage: 380 Volt Interference suppressor: Agitator mounting: bottom

Condition: used, 2 cylinder standing agitator tank made of stainless steel, used Contents: 50 cbm Order number: 3810 Material: 1.4401 in contact with product 1.4301 otherwise Inside weld seams ground to be food safe Dimensions: 3,000 mm internal diameter 3,100 mm external diameter 7,000 mm cylinder height 350 mm upper base Lsdpfx Ahev Dthwovjhd 500 mm lower base 400 mm ground clearance 8,250 mm approx. total height Design: cylindrical standing on frame with conical bases Propeller agitator installed at an angle in the cylinder, 12 kW, 980 rpm. Double jacket on the cylinder, 2 circuits approx. 14 sqm, 76 liters each and on the lower floor, 1 circuit, approx. 5 sqm, 90 liters Operating overpressure 2 bar Insulation 50 mm PU foam around cylinder, upper floor and frame, stainless steel cover with manufacturer's certificate and material certificates Connections: 1 manhole 340 x 440 mm in the cylinder Ventilation Ø 300 with spray head in the upper floor Outlet bottom center DN 65 extended Weight: approx. 6.5 tons

Condition: ready for operation (used), 1 cyl. standing stainless steel agitator tank, used capacity: 50 cbm order number: 3750 material: V2A Dimensions: 3.300 mm diameter 5.700/5.900 mm cyl. height 400 mm upper bottom 1.700 mm height agitator 8.000 mm total height execution: cyl. upright with lower flat bottom inclined bottom sloping towards the outlet - must be shimmed during installation otherwise the bottom will crack - with upper conical bottom trapezoidal agitator from top centered approx. 5 kW, approx. 30 rpm. with external half-pipe coil, 18 sqm at the cylinder, for tightness tested with 2 bar operating overpressure upper bottom insulated, cover stainless steel fully welded connections: 1 manhole 340 x 440 mm in cylinder Lhjdpfx Aeiq Izdshved top centered 1 spray head 2 connections DN 65 at the lowest point weight: approx. 5 to

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Lhodpfx Ahow U Sw Ajvsd Jacket capacity: 33 litres Usable volume: approx. 50-250 litres Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Year of construction: 1997 Space requirement: 120 x 90 x 210 cm

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. Lsdex D A R Dopfx Ahvshd • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Venting, spray head, crane lugs Design: Upright Outer diameter: 3,880 mm Inner diameter: 3,700 mm Total height: 9,200 mm Insulation: available Agitator: Beam agitator Base type: Skirted base Location: Outdoor storage Volume: 60,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous application: Food TANK Bottoms: Conical bottom Lhedex Dmcqepfx Ahvod EQUIPMENT Manhole / dome: in the shell AGITATOR 1 Bottom bearing: Agitator arrangement: eccentric on top head

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Year of manufacture: 2006 Remarks: Nameplate no longer available; cylinder manhole diameter 600 mm; minor dent on the side of the vessel Internal diameter: 2,500 mm Total height: 3,800 mm Power: 3 kW Top head: Flat bottom Agitator: Beam agitator Support design: Height-adjustable feet Location: Outdoor storage Technical documentation: Drawing Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 2,000 mm Last product processed: Sludge VESSEL Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.8 (to/m³) Bottom head: Conical bottom Lodpox Dmbajfx Ahvjhd Number of feet: 3 pcs EQUIPMENT Manhole/Dome: In cylinder, in top head (Ø 430 mm) Outlet: Flange DN80 Note: Minor residues MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380/660 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator positioning: Eccentric in top head

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: Manhole diameter approx. 460 mm; outlet likely DN 50, reduced to approx. 15 mm by flanged fitting; 2 dip tubes inside the tank Rotation speed: 520 RPM Internal diameter: 1,390 mm Total height: 5,050 mm Power: 2.1 kW Agitator: Propeller Support type: Feet Location: Bremen Nameplate: Volume: 2,500 liters Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 1,600 mm Last application: Chemical TANK Lhedjx Dlwgspfx Ahved Number of feet: 3 pcs EQUIPMENT Manhole / Dome: On top head Outlet: Present MATERIAL SPECIFICATIONS Material of feet: Stainless steel AGITATOR 1 Voltage: 220/380 Volt Agitator arrangement: Eccentric in top head

Condition: used, tank capacity: 261 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: Handhole diameter approx. 150 mm; 2 of the feet are shorter than the other two feet (see photos; should be considered when installing the vessel) Speed: 920 rpm Internal diameter: 600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 1,880 mm Power: 0.65 kW Top cover: Removable / hinged top cover Agitator: Propeller Support type: Feet Location: Bremen Lhedpfxex Dlv Ne Ahvod Nameplate: Volume: 261 liters Product contact material: V4A 1.4571 (AISI 316) Condition: Used Cylindrical height: 790 mm Last application: Chemicals VESSEL Number of feet: 4 pcs. EQUIPMENT Manway / Inspection port: Handhole Outlet: Available Note: Light residues MATERIAL SPECIFICATION Feet material: Stainless steel AGITATOR 1 Voltage: 230/400 V Agitator mounting: Eccentrically mounted in top cover

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: spray head Design: upright Remarks: Manhole diameter 420 mm; 2 longitudinal sight glasses in the cylinder; outlet fitting (disc valve) incomplete Inner diameter: 1,040 mm Total height: 2,350 mm Agitator: agitator flange Base type: height-adjustable feet Location: Bremen Volume: 1,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,190 mm TANK Number of feet: 4 pcs EQUIPMENT Manhole / Dome: on the top cover Lsdpfox Dluxjx Ahvehd Outlet: 60 mm MATERIAL PROPERTIES Feet material: stainless steel AGITATOR 1 Agitator arrangement: eccentric on top cover

Condition: used, Year of construction: 2011, tank capacity: 956 l, GENERAL INFORMATION Design: vertical Year of manufacture: 2011 Notes: Technical documentation (including for the agitator) available for one of the two tanks Speed: 24 - 247 rpm Outer diameter: 1,050 mm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 2,000 mm Heating/Cooling: available Max. permissible operating overpressure: 1.5 bar Top cover: removable / hinged top cover Agitator: Blade agitator Mounting type: mobile on castors Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, operating manual Cylinder temperature control: double jacket Nameplate: Vacuum: 0.5 bar Volume: 956 liters Double jacket volume: 83.0 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4401/04 (AISI316) Condition: unused Cylindrical height: 950 mm Last application: pharmaceutical Lsdox Dlqgepfx Ahvjhd TANK Number of feet: 4 units HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: 25 mm MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: Inotec GmbH TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Agitator arrangement: centrally in top cover Agitator equipment: pneumatically driven motor

Condition: used, Outer diameter: 340mm Bolt circle: 290mmHole diameter: 23mm Lhjdpfx Ahsxytybevsd

Condition: used, tank capacity: 180 l, GENERAL INFORMATION Design: upright Remarks: Handhole diameter 200 mm Speed: 224 rpm Inner diameter: 640 mm Total height: 1,950 mm Power: 0.55 kW Agitator: propeller type Support: feet Location: Bremen Volume: 180 liters Lhsdpfxexqduds Ahvod Product-contact material: V2A 1.4301 (AISI304) Condition: used TANK Number of feet: 4 pcs EQUIPMENT Manhole / Dome: handhole Outlet: DN40 DIN 11851 Note: light residues MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR Voltage: 220/380 Volts Agitator positioning: eccentric on top head

Condition: used, tank capacity: 180 l, GENERAL Equipment: Butterfly valve Design: Vertical Notes: Handhole diameter 200 mm Speed: 945 rpm Internal diameter: 640 mm Lodpfx Ahsxqdt Tsvehd Total height: 1,880 mm Power: 2.2 kW Agitator: Propeller Stand type: Feet Location: Bremen Volume: 180 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used TANK Number of feet: 4 pcs EQUIPMENT Manhole / Dome: Handhole Outlet: DN40 DIN 11851 Remark: Light adhesions MATERIAL SPECIFICATIONS Material of feet: Stainless steel AGITATOR Voltage: 220/380 V Agitator arrangement: Eccentric in the upper head

Condition: used, tank capacity: 700 l, GENERAL Equipment: Ball valve Design: Upright Remarks: Outlet fitting is lower than foot ends (please take into account when installing); 1 bolted lid segment at the top edge (remaining area is open); see photos Speed: 900 rpm Internal diameter: 950 mm Total height: 1,570 mm Power: 0.55 kW Agitator: Propeller Base type: Feet Location: Bremen Volume: 700 liters Product-contacting material: V2A 1.4301 (AISI 304) Lodexqdt Hopfx Ahvehd Condition: Used Cylindrical height: 1,000 mm TANK Number of feet: 3 pcs EQUIPMENT Outlet (alternative entry): 25 mm MATERIAL QUALITY Foot material: Stainless steel AGITATOR Voltage: 230/400 Volt

Condition: excellent (used), Equipment: type plate available, 18 x sparkling wine pressure tank/storage tank made of V2A, 8 bar, with lateral agitator mixer - second-hand - used Manufacturer: Rieger Volume approx. 52,100 liters Diameter approx. 3,250 mm cyl. height approx. 5,500 mm Total height approx. 8,000 mm Cylinder wall thickness: 11 mm Operating pressure: 8 bar Working temperature: 20 C° Internal surface: 2B=IIIC ground Surface outside: marbled Top shelf: dished bottom 3 crane eyes CIP line DN 50 drawn downwards with flange connection with pressure line DN 25 5 saddle feet Tank cylinder: Manhole oval 350 x 450 mm Lhedotvg Uyspfx Ahvsd 1/2" sample tap with flange connection Clear drain DN 65 with angle seat valve Lateral agitator mixer, type: propeller at 315° from the manhole Complete champagne pressure fitting with safety valve, pressure gauge, vacuum valve and DN 25 angle seat valve Underbody: dished bottom Residual drain pipe pulled forward in the middle, flush with the tank DN 65 with angle seat valve 6 sturdy with height-adjustable spherical feet and sturdy washers 9 basic tanks and 9 saddle tanks are available otherwise as per photos