Used Table Saw for sale (20,230)

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, – Year of production: 2007 – Austrian manufacture TECHNICAL SPECIFICATIONS: Bledoymz Ubepfx Adrsi – Total power: 7.35 kW – Max. saw blade diameter: 450 mm – Min. saw blade diameter: 250 mm – Scoring blade diameter: 125 mm – Pro Gline carriage guides – Carriage length: 2,800 mm – Fence with two stops – Cutting width to the right: 1,250 mm – Three spindle speeds: 3,500 / 4,500 / 5,500 RPM – Main motor power: 5.5 kW – Electric height adjustment of cut – Electric angle adjustment of cut – Electric setting of cutting width on the right side – Automatic scoring unit advance – Extraction port diameters: 100 mm and 120 mm Transport dimensions: – Length: 290 cm – Width: 230 cm – Height: 180 cm – Weight: approx. 1,000 kg

Condition: like new (used), Year of construction: 2020, For sale is a demonstration machine: Hammer K3Winner Comfort panel saw with a cutting width of 300 mm. The machine was only briefly used for demonstration purposes in-house and can thus be considered as new, with full warranty/guarantee. Technical specifications: - Sliding table 2000 mm Blodjy Akdrjpfx Adrei - Extension table 1100 mm - Mitre fence 1300 mm - Angle stop index - Saw blade tiltable 90–45° - Max. cutting height 104 mm with 315 mm saw blade diameter - Cutting width 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2020 The panel saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, panel Reference: R-D1618-10

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Motor power 50Hz 3~ 400V 5.5kW Sliding table 2800 mm without scoring saw Digital angle adjustment display Digital speed display Hydraulic lifting / lowering / tilting Cutting width 1005 mm Manual parallel fence LAP laser system Bljdpfxsy Icbgo Adroi Mitre fence (small) Saw blade diameter 250 - 450 mm

Condition: good (used), Year of construction: 2018, functionality: fully functional, Horizontal panel saw / Horizontal beam saw with lift table loading Manufacturer: SCM / Gabbiani Model: Gabbiani ST 115 Year of manufacture: 2018 Horizontal pressure beam saw with rear lift table loading, previously used in a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lift table approx. 1850 mm Max. stack height on the lift table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed: 0 - 135 m/min Variable pusher speed: 0 - 70 m/min Main saw motor approx. 9 kW Main saw blade speed: 3900 rpm Saw blade diameter: 400 mm Scoring saw motor approx. 1.8 kW Scoring saw speed: 6300 rpm Scoring saw blade diameter: 160 mm Bodpfx Aey H Up Hsdreli 6 clamps (3 of which include a front aligner) 2 air-cushion tables, each with blower Voltage: 400 V, 3-phase, 50 Hz, 43 A Approximate weight: 5500 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 5,000 rpm, cutting width at rip fence: 1,300 mm, TECHNICAL DETAILS Saw blade diameter max.: 450 mm Cutting width at CNC parallel fence: 1,300 mm Max. speed: 5,000 rpm Infinitely variable adjustment Double roller carriage length: 3,000 mm Mitre angle stop length: 3,200 mm Digitally adjustable Table extension: 840 mm Pneumatic quick-clamp range: 0-90 mm 2 quick clamps MACHINE DETAILS Blodjy H Errjpfx Adrsi Power: 7.5 kW EQUIPMENT CE marking Saw blade guard Double roller carriage with TIP-SERVO-DRIVE Air cushion table Spray device with remote control Front support roller 2 pneumatic quick clamps Digital mitre gauge L CNC parallel fence

Condition: used, GRAULE AGT pull and table circular saw Blsdpfoxf Tr Usx Adrei

Condition: ready for operation (used), Connection voltage 380V Main motor 7.5kW Scoring unit 0.75kW Variable drive Double roller carriage 3000mm Electric height and tilt adjustment Cutting width 1000mm, CNC controlled Clamping system AKE Saw blade diameter max. 500 mm Control panel at eye level Blsdpey Hq N Asfx Adrsi Swiveling front table Template holder 2-axis scoring unit Table extension 840mm Angle fence PQS Standard PSV with narrow and wide hood

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 202 mm, cutting width (max.): 1,250 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 2,800 rpm, total length: 3,200 mm, Equipment: CE marking, saw blade guard, Format 4 Panel Saw Kappa 550 Power Drive - 11 kW, speeds 2800-4000 rpm - Year of manufacture: 2009 - Power Drive control system - Positioning control for height adjustment: 202 mm - Positioning control for tilt adjustment: 90°–45° - Crosscut fence 3200 mm, 2 fence stops - Outrigger table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, edging shoe - Cutting width 1250 mm - Overhead guard, extractable and height adjustable, can be swung out of the working area (not shown in the pictures but available) - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and angle adjustment 0°–46° - Table saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg Price ex location Transport available at extra charge! Bsdpey Hk Swefx Adrjli

Condition: new, Year of construction: 2026, The CORMAK MJ45-KB4 sliding table saw is an industrial panel saw with a scoring unit, designed for precise cutting of furniture boards, plywood, and other wood-based materials. The 2600 mm sliding table and robust construction ensure repeatability and high cutting quality. Key advantages of the machine Scoring unit with a separate motor – eliminates chipping on laminates and veneers. Aluminum sliding carriage running on hardened steel guide bars – ensures rigidity and smooth feed. 2600 mm sliding table – reliable handling of large and heavy panels. Main motor 5.5 kW – consistent cutting quality in continuous operation. Tilt range 0–45° – flexibility when cutting angled components. Extendable telescopic fence up to 3100 mm – fast and repeatable settings. Rotational speeds 4000/6000 rpm (main blade) and 8000 rpm (scoring blade) – optimal adjustment to material type. Cast iron body – vibration damping and cutting system stability. Construction and technology The design is based on a torsion-resistant cast iron body, which stabilizes the saw unit and minimizes vibrations. The aluminum carriage moves on hardened rods, ensuring long-term precision. The outrigger table facilitates handling large panels without additional support. Adjustment mechanisms with clear readouts (including angle indication on the handwheel) allow for quick and precise setup. Precision and performance The MJ45-KB4 sliding table saw ensures clean edges thanks to the 125 × 20 mm scoring blade and stable guide geometry. The cutting height range up to 90 mm at 90° and 56 mm at 45° allows processing of a wide range of formats and thicknesses. Two main blade speeds enable parameter adjustment to the material type, maintaining dimensional repeatability and reducing the need for rework. Applications The machine is dedicated to workshops and production facilities seeking a stable panel saw with a scoring unit for serial cutting of furniture and structural elements. It meets the requirements of plants where quality, dimensional accuracy, and reliability in multi-shift operation are essential. Standard equipment Scoring unit with separate drive 2600 mm sliding table on guide bars Dial indicator for blade tilt Telescopic fence up to 3100 mm (front/rear mounting on support table) User manual in Polish CE declaration of conformity Optional equipment Set of saw blades for wood and laminate Dust extraction systems Panel transport trolley Technical specifications Sliding table length: 2600 mm Bsdpfx Adoywkc Dsrsli Cutting width: 1250 mm Saw tilt: 0–45° Cutting height at 90°: 90 mm Cutting height at 45°: 56 mm Max main blade diameter: 315 mm Max scoring blade diameter: 125 mm Main blade speed: 4000 / 6000 rpm Scoring blade speed: 8000 rpm Main motor power (continuous S1/S6): 5.5 kW Scoring motor power (continuous S1/S6): 0.75 kW Weight: 650 kg

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution 2.0 with Software SP2 on Windows XP Lifting table (mm) 2200 x 4300 Twin Pusher Clamps / grippers 7 Max. cutting width (mm) 4250 Max blade projection (mm) 135 Max. clamps opening (mm) 125 Scoring Unit (max saw diameter 200 mm) Main Sawing Unit (max saw diameter 460mm / power (KW 21 / HP 28) Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting Air cushion tables (No.) 3 Total power (Kw) 43 (ca.) OPTIONAL: Optimisation software: HPO Bjdpfsillukox Adrsli

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Concept Software CADmatic 4 Professional Lifting scissor table (mm) 4300 x 2200 No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Bljdsimr Icepfx Adrei Total power (Kw) 28 OPTION: - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels)

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Lifting table (mm) 4300 x 2200 No. 2 Rear pushers (one with clamps / grippers) No. 8 clamps / grippers Max. cutting width (mm) 4200 Useful stroke of the pushing system (mm) 4200 Max blade projection (mm) 135 Max clamps opening (mm) 125 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 21 Adjustable speed of the saw carriage (m/min) 6 - 150 Front Turning table (rotating at 90°) with air blowing system (mm 2100 x 4100) Bljdpfjq Rffiox Adrsi Total power (Kw) 36 (ca.)

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Rear Lifting table No. 1 Rear pushers Twin Pusher No. 9 clamps Max. cutting width (mm) 3300 Useful stroke of the pushing system (mm) 3300 Max blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 360 mm - Kw 18 Bjdpfx Adjp R Sdhsroli Adjustable speed of the saw carriage (m/min) 5 - 120 Front supporting tables with Air blowing system (N.) 3 Total power (Kw) 21 (ca.)

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Turning device (rotating unit) at 90° Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 95 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 380 / Kw 13,5 Adjustable speed of the saw carriage (m/min) 1 - 130 Front supporting tables with Air blowing system (N.) 3 (2160mm x 650mm) Total power (Kw) 28 (ca.) Bljdpfx Adjh Imvhorei

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software SIEMENS WinAC RTX Outside Roller table for pre-loading (mm 5600 x 2200) + Pre-Loading Buffer Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher - DUPLUS2 No. 12 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Bodpfx Adot Ah Niorjli Max blade projection (mm) 145 Max clamps opening (mm) 150 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 42 (ca.) OPTIONAL: Optimisation software: HPO

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Bledpfx Aoyymtdsdrji Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Blsdpetxirfefx Adrei

Condition: new, Year of construction: 2026, The PS12E-3000 format saw is a professional carpentry tool that stands out for its powerful specification and its ability to perform large-scale precision cuts. This advanced circular saw has been developed for a variety of woodworking tasks and is the ideal tool for demanding users. The main features of the saw, the PS12E-3000 wood panel saw: Two cutting discs: The saw is equipped with two cutting discs - a main disc and an undercutting disc - which provides ample cutting capacity for different types of wood materials. Large format table: One of the main advantages of this model is the extra-wide, bearing-mounted format table with support, which allows precise processing of large-format chipboard up to almost 3,000mm long and other large-sized wood materials. Additional undercutter: The additional undercutting blade makes the saw ideal for cutting furniture board and particleboard, eliminating the risk of splintering and ensuring an even cut. Disc inclination: The cutting disc can be tilted from 90° to 45° Maximum bar length: This saw is fitted with a bar of an impressive length of 2,300 mm Disc replacement: The replacement process is quick and efficient, thanks to the ability to remove the metal top and unscrew the blade. Saw blade guard: The saw has an effective saw blade guard, which can also be connected to the extraction system to help keep the work area clean. Powerful motor: The saw blades are driven by a powerful 3.8 kW, 400V motor, which guarantees smooth operation and efficient cuts. Control panel: The machine's control panel is located on the underside of the saw and includes an emergency stop, a knob for angle cuts (45°) and a knob for blade height adjustment with a locking mechanism. Additional measuring instruments: All guides are equipped with length and cutting angle scales, allowing the required angle and length to be quickly set without the need for additional measurements. Extraction compatibility: The saw is suitable for connection to a sawdust and chip extraction system with a suction nozzle diameter of 100 mm, which contributes to keeping the workplace clean. Application of the saw, format saw for wood: The PS12E-3000 format saw is an advanced tool that combines durability, precision and performance, making it the ideal choice for professional woodworkers and everyday woodworkers. Its versatile capabilities and advanced features allow it to handle a wide variety of woodworking projects and tasks in both industrial and craft settings. DIMENSIONS OF THE MOVING TABLE 3000 x 270 mm MAIN TABLE DIMENSIONS 800 x 385 mm SIDE AUXILIARY TABLE DIMENSIONS 880 x 800 mm BAND WIDTH 1220 mm SAW TILT 0-45° CUTTING HEIGHT AT 90° 100 mm CUTTING HEIGHT AT 45° 80 mm MAXIMUM SAW SIZE 315 mm MAXIMUM Blade size 100 mm MAIN SAW RPM 4000 rpm CUTTING SAW RPM 5800 rpm POWER OF ENGINE S6 5,3 kW / 7,1 hp POWER OF ENGINE S1 3,8 kW / 5,1 hp 400 V POWER SUPPLY Blodpfx Aevugc Asdrsi WEIGHT 309 kg

Condition: new, Year of construction: 2026, The PS12E-2000 format saw is a professional carpentry tool that stands out for its versatility and advanced features. This circular saw has been designed for a wide variety of woodworking tasks, offering both precision cutting of narrow and thin boards and handling thick wood tops with a maximum thickness of up to 100mm. The main features of the saw, the PS12E-2000 wood panel saw: Two cutting discs: the saw is equipped with two cutting discs - a main disc and an undercutting disc, providing versatile cutting capabilities for different types of wood materials. MDF undercutter: An additional undercutter has been fitted to the machine, allowing precise cutting of MDF and other wood materials with a similar structure. Blade height adjustment: offers infinitely variable height adjustment of the cutting saw up to 100 mm, allowing it to be adapted to different material thicknesses. Disc inclination: The cutting disc can be tilted from 90° to 45° Solid guideways: The machine has solid guideways with scales, both longitudinal (steel) and angular Additional format table: the large bearing-mounted format table with support is one of the main advantages of this saw. This makes it possible to process large format boards and materials with a large surface area. Sawdust discharge system: The woodworking machine is equipped with a sawdust discharge pipe system, which helps keep the work area clean. Easy disc change: The replacement process is quick and efficient, allowing you to work efficiently. Side guide with graduation: fitted with a side guide with accurate graduation, which facilitates serial cuts of the same length. Saw blade guard: the saw has a saw blade guard that can additionally be connected to the extraction system, which guarantees safety and cleanliness in the working area. Technical data: Length of the format table [mm] 2000 Cutting width right side [mm] 1260 Swing of saw blade [°] 45 Cutting height at 45° [mm] 80 Cutting height when using circular saw blade 315 90° [mm] 100 Cutting height with saw blade set to 300 90° [mm] 95 Maximum dimension of saw blade [mm] 315 x 30 Bodpfovuf Tmjx Adroli Maximum dimension of undercut [mm] 100 x 20 RPM of main saw [U/min] 4500 Bowl speed [U/min] 5800 Motor power S1/S6 3.8 kW / 6.1 hp Power supply 3 phases, 400 V Weight [kg] 275 Warranty [months] 12

Condition: ready for operation (used), -Cutting area approx. 300 x 120 mm -saw blade 350 mm -traverse path 370 mm -turning knob D= 1200 mm The round table with the saw unit can be turned very easily on both sides Locks for locking are currently mounted on one side. The same can of course also be mounted on the other side Weight 890 kg Bodpobubukofx Adroli

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivel range: up to 45° Saw blade/cutting blade diameter: 200 mm Cutting depth: 47 mm Electrical connection: 230 V AC Weight: 14.5 kg Bledpfxoc Snvfo Adrsi

Condition: used, Year of construction: 2021, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 36 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, cutting width (max.): 3,200 mm, overall weight: 4,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, We offer this used Felder kappa automatic 80 sliding table saw. Machine can be very fast in production if presented with an equally fast operator. The cuts are perfect, 90 degree angle is easy to adjust (and should be done regularly). We also offer all of the saw blades as well as undercutters we have to it. Model: kappa automatic 80 Voltage: 400 V Phases: 3 Frequency: 50 Hz Current: 36 A Power: 14.0 kW Blsdpfxjy Dda Ae Adrei Year of construction: 2021 year Weight: 4200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1986, functionality: fully functional, Sizing saw Altendorf TRK 45 Year of manufacture 1986 S/N 86-9-209 checked in our workshop for normal operating condition Gs Dkkmsng Etrjz Ssua carriage length: 1350 mm height and swivel adjustment manual with handwheel engine power: 5,5kW cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 ( without scorer ) with scorer Automatic engine brake weight approx. 1100 kg Technical specification under reserve Bsdpfxeng Etre Adreli + 2 additional saw blades

Condition: good (used), Year of construction: 1995, Panel saw Manufacturer: Martin Model: T72 Year of manufacture: 1995 - When the machine is switched on, the control display takes approx. 15 minutes to show any information. - The flat belt for the scorer is missing. Needs to be replaced. - The pneumatic clamping of the parallel fence does not clamp. Carriage length: 3,300 mm Cutting width: approx. 1,200 mm Cutting height: approx. 170 mm Saw blade diameter: max. 500 mm Power: 5.5 kW Bljdpfx Adoy A I Nreroi Speed: 2,800 / 4,000 / 5,500 rpm Scorer: Yes Motor brake: Yes

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,030 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, TECHNICAL DATA - Demonstration machine from showroom Roller carriage length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90° / 105 mm at 46° Cutting width, rip fence 1030 mm Saw blade max. Ø 450 mm Saw blade, retractable under table Ø 400 mm Table size, cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1200 x 655 mm Table height +/- 20 mm 900 mm Speed, main saw blade 3000 / 4000 / 5000 / 6000 RPM Net weight approx. 1051 kg TECHNICAL DESCRIPTION Solid German engineering For trimming, cutting to length, formatting, miter cutting, etc. Dimensionally stable and self-supporting machine body, constructed as a robust frame welded from thick-walled steel profiles, laser-cut steel sheet metal parts and mechanically processed. The torsion-resistant and finely planed cast iron table top is mounted on the machine body. The robust and powerful sawing unit installed in the machine stand guarantees precise saw cuts. The complete saw arbor unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guidance for height adjustment as well as the 2-fold ball-bearing long circular saw arbor ensure absolute smooth running. The ball-bearing double roller carriage is easy to move and maintenance-free. Precise and backlash-free running over the full length, guided with hardened and ground round steel guides with remote locking in a 50 mm grid. Blodpfjgz Hx Djx Adrji Stable and yet light cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side extendable up to 250 mm Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free adjustable stop flaps, 1 end stop with support for long strips; length stop can be used as an angled miter stop on both sides, continuously adjustable from 0° to 46° with mechanical length compensation; all common miter angles (15°, 22.5°, 30°, 45°) can be quickly set using a locking system. Rip fence with cutting width 1030 mm to the right of the saw blade with fine adjustment, easily adjustable and lockable manually, dimension indication via a clearly legible mm scale on an adjustable ruler carrier. Table widening 1200 x 600 mm and table extension 750 x 655 mm Operation on the machine body with a 4.3" touchscreen control for cutting height, swivel adjustment and speed. Electromotive height and swivel adjustment via push buttons. Swivel range of the saw blade from 0° – 46° APA saw blade quick-change system Speed, main saw blade 3000 / 4000 / 5000 / 6000 RPM Protective device can be swiveled away to both sides, protective cover with interchangeable insert wide/narrow for saw blades up to Ø 450 mm Push-button operation with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm, retractable under table Dust extraction connection Ø 120 mm on the machine body, Ø 80 mm on the protective cover Roller carriage, length and width stop profile anodized CE compliant GS tested