Used Table Edge Trimmer for sale (19,701)

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (1 x Kw 5,2 ca.) N°2 Hogging Units (1 Top + 1 Bottom) DT 10 (2 x Kw 5,8 ca.)+ Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge control EC40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (2 x Kw 0,3 ca.) 28 m/min (0° - 25°) Rough Trimming unit RS 10 (2 x Kw 0,75) Fine Trimming unit (Multi-profile, by N.C.) RF 30 (2 x Kw 0,37) 0°-25° Multi Function Unit (Profile contour Trimming unit) AR 30 (Kw 0,35 x 2) LEFT: 2 x Milling grooving units FB 32 (2 x Kw 5 ca.) 0° - 90° RIGHT: Milling grooving unit FB 30 (1 x Kw 5 ca.) 0° - 90° Profile Scraping unit RB 10 Glue scraping unit RC 10 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37) + Hot Air Heater (to reactivate the color of plastic tape) PH 10 Njdpfx Ahoywk Elsvekw OPTION: D.O.M. Unloader with load-bearing column and mobile arm (with vacuum suction cups), for unloading and stacking edged panels

Condition: used, table clamping surface: 228 x 273 mm 3 T-slots: 12 mm in between 4 x 4 threaded holes: M 8 table height at zero position: 146 mm Nkodpfxebbgcxe Ahvow Space requirement: 250 x 290 mm Weight: 41 kg

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Nsdecblc Sjpfx Ahvskw Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: new, for working length: 1000 mm Nedpfxec H Tngo Ahvekw Total height: 145 mm weight:

Condition: good (used), Table surface: 500 x 680 mm Njdpfjft Skgsx Ahvekw Table height above floor: 740 mm Weight:

Year of construction: 2000, condition: used, table clamping surface: 800 x 425 mm Nsdpfob N Acmox Ahvekw 6 T-slots 14-H7, slot width: 63 mm table swivels left/right: 45° Table inclinable from/to the machine: 15/45°. Table top rotation range 360°, resolution: 0,001°. max. workpiece weight: 300 kg Dead weight: 340 kg

Condition: used, machine/vehicle number: 2414-0075 bzw. 2314-0703, table clamping surface: 520 x 1000 mm 6 clamping grooves: 16 mm groove spacing: 90 mm Clamping plate horizontally rotatable to the right and left by: 45° each tiltable from/to the machine by: 15° each swivelling to the right and left: 15° each permissible load movable approx.: 1000 kg permissible load rigid table approx.: 1500 kg weight: 376 kg Nkedpsb Hmbpefx Ahvsw Suitable for milling machines DECKEL: FP 3 L; FP 3 LG; FP 3 LV

Year of construction: 1985, condition: used, largest surface to be machined: 400 x 300 mm speed of the knife spindle infinitely variable: 1600 - 6000 rpm electrical connection: three-phase current 380 V space requirement: 900 x 800 x 600 mm Nksdjb Nxdvjpfx Ahvew

Condition: used, Table width: 750 mm Nsdpfx Aeb Duvcehvekw Table length: 2000 mm Table height: 850 mm Top thickness: 40 mm

Condition: used, machine/vehicle number: 7173, Platform Ø: 1500 mm Winding height approx.: 1800 mm Nkjdpfx Ahscg Rn Uevjw Reception length for the winding rolls: 400 mm drive motor: 380 V space requirement: 2400 x 1500 x 2100 mm

Condition: used, machine/vehicle number: 7016, Table Ø: 320 mm Overall height: 103 mm Center hole: MK 4 Nkedpeb Nxprjfx Ahvew Space requirement: 400 x 500 mm

Condition: used, with mounted three-jaw chuck table-Ø: 200 mm bore approx.: 18 mm overall height: 100 mm Nkedpfx Ahoda I Rvsvjw total height with chuck: 165 mm width: 270 mm length: 320 mm

Year of construction: 1973, condition: good (used), table size: 700 x 800 mm plate thickness: 18 mm table height over base: 830 mm Nodpfxjd Na R Sj Ahvokw

Year of construction: 1977, condition: used, machine/vehicle number: 74 362, Load capacity: 500 kg Table size: 600 x 600 mm small height above floor: 600 mm stroke, hydraulic foot operated: 720 mm Nkedpfeb Nwfgjx Ahvow maximum height above floor: 1320 mm weight: 105 kg

Year of construction: 1990, condition: used, edge heights: 10 - 60 mm Nkodpfxo T T Ddj Ahvsw edge band material thickness: 0,4 - 25 mm electr. connection: 380 V, approx. 9,9 kW space needed: 2900 x 870 x 1320 mm weight: 780 kg

Condition: used, manually movable Nkodpfx Asccxgwohvjw Table or base plate size (same size): 460 x 150 mm Overall height: 45 mm Weight (weighed): Guide slightly grooved!

Condition: used, machine/vehicle number: 9029, table size: 400 mm Ø height: 135 mm Nkods N Ra Ropfx Ahvsw dimensions: 500 x 500 x 135 mm

Condition: used, Length: 355 mm Nkedpfx Asb N Nd Iehvew Weight: 98 kg

Condition: ready for operation (used), Table width: 460 mm Nododzx Hfjpfx Ahvekw table length: 3000 mm on 4 feet adjustable in height: 330 - 350 or 450 - 500 mm Weight: 53 kg

Condition: ready for operation (used), Year of construction: 2008, Table size: 220 x 820 mm Table size (front table): 250 x 350 mm Nedpfsv Efn Sjx Ahvskw Grinding wheel dimensions: 150 x 2260 mm Grinding belt speed: 16 m/s Drive motor: 400 V, 1.5 kW Weight: 164 kg Space required: 1200 x 600 x 1250 mm

Condition: ready for operation (used), Table size: 900 x 500 x 550 mm height Nodpfxjx Ebh Ro Ahvjkw Electrical connection: 380 V Required space: 1050 x 1050 x 1800 mm height Weight: 180 kg

Condition: ready for operation (used), Horizontal rotary table, manually operated Bore diameter: 145 mm Including 3 inwardly stepped jaws Nsdpfxowx H Irj Ahvekw Space required: 500 x 500 x 300 mm

Condition: ready for operation (used), Outside Ø: 350 mm Bore: 40 mm Construction height: 115 mm Nodpfxog Hzaze Ahvjkw including three-jaw chuck AROWA, 250 mm Ø, bore: 75 mm Total weight:

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Nkedpfxou R S Nws Ahvsw Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Year of construction: 1989, condition: excellent (used), Coming up for sale: 1 used clamping / boring mill table Manufacturer: Skoda Type: E20OB22875 Nkodpfx Asg Sbbmehvsw year: 1989 dimensions 2.000 x 2.000 mm part weight: up to 25t electr. adjustable mass: 10t