Used Table Boring Machine for sale (66,936)

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Ncodpfjwhuu Esx Ahvep Speed: 1400 / 2800 rpm Holder clamp: manual Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Ncodpfx Ahjv S Diujvop Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Condition: as good as new (ex-display), Year of construction: 2022, Dowel hole drilling device: Pitch 16, 22 25, 32 Ncsdpfx Aogzlq Ejhvep Drilling depth: 150 mm Slot length: 250 mm Height adjustment range: 145 mm Motor power: 1.5 kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 160 kg

Condition: new, Year of construction: 2022, Dowel hole drilling device: no Drilling depth: 150 mm oblong hole length: 180 mm Height adjustment travel: 145 mm Motor power: 1,5kW Ncodpfxogq Un As Ahvep Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm Ncjdjxz Aygspfx Ahvsp * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: excellent (used), Year of construction: 2011, DRLTS 3000 x 2500 Table dimensions (L x W): 3,000 x 2,500 mm Overall dimensions (L x W x H): 6,374 x 2,500 x 1,200 mm Payload: 60,000 kg Motor speed linear unit: 2,500 rpm Power consumption: 35 kW Ncodpfx Ahsyqwxdjvsp Year of manufacture: 2011 Weight: 26,000 kg

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment. Ncsdpfxeyqmvxs Ahvop

Condition: used, Year of construction: 1971, core drilling diameter max. 50-355 mm bore depth 4000 mm swing diameter 1000 mm centre height 500 mm full boring 18-100 mm main spindle bore 163 mm turning speeds 56-710 U/min workpiece weight 6,3/10 t Tailstock 70-600 mm Drill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Nedpoyt Rz Dofx Ahvocp More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, SIP 600 – Precision Coordinate Boring Machine Accuracy Positioning accuracy on X and Y axes over the entire travel: 0.003 mm Capacity Table travel (X axis): 1000 mm Slide travel (Y axis): 700 mm Vertical quill travel: 300 mm Ncedpeyt Rrpsfx Ahvep Vertical crossrail travel: 780 mm Distance between uprights: approx. 1100 mm Max. distance spindle nose to table: 1000 mm Table Usable table surface: 1100 × 842 mm Maximum load capacity: 1500 kg Feed rates: 1 – 1000 mm/min Rapid traverse: 5000 mm/min Slide (Carriage) Feed rates: 1 – 1000 mm/min Rapid traverse: 5000 mm/min Spindle and Hydrostatic Quill Spindle speed: 40 – 2000 rpm (18 speeds) Automatic boring feeds: 0.04 – 0.35 mm/rev Tool taper: Morse 4 – SIP 4e Spindle motor power: 5.9 kW (8 HP) Hydrostatic quill diameter: 135 mm Functions: Automatic tool clamping Automatic depth stop Spindle rotation direction reversal Speed preselection Machining Assist Unit X and Y axis display: 0.001 mm Z axis display: 0.01 mm Memory capacity: 999 sequences Automatic movements: X and Y / Simultaneous XY Programmable increments: 0.002 / 0.009 / 0.1 / 1 mm Power Supply Electrical supply: 50 Hz – 380 V 60 Hz – 440 V Compressed air: 6 – 10 bar (11 l/min) Machine Dimensions Machine footprint: 2870 × 3480 mm Footprint with cabinet: 3870 × 4000 mm Total height: 3235 mm Weight Net machine weight: 10,000 kg Machine weight with cabinet and accessories: 11,000 kg

Condition: ready for operation (used), functionality: fully functional, AYEN push-rod drilling unit electro-pneumatic push-rod drilling unit various types 2 units RPM 1C, 0.73 kW – €450 each Njdpfx Asqv Ey Uohvjcp 1 unit RPM 0.5C, 0.37 kW – €400

Condition: good (used), Year of construction: 2003, ELB Rotary 40 NC-K rotary table surface grinding machine, table diameter 400 mm, grinding height 300 mm, year of manufacture 2003, ELN NC-K control, spindle power 4 kW, grinding wheel 300 x 50 x 76.2 mm, rotary table with magnetic chuck diameter 400 mm, full enclosure, coolant system with paper band filter, can be inspected under power, we are happy to take care of installation / training and subsequent on-site service! Financing/leasing is no problem, we are happy to provide an offer! Ncedpfx Aeuiafushvop

Condition: new, Year of construction: 2025, heavy-duty construction with cast iron table smooth movements using hand lever and handwheel eccentric clamping device dowel drilling unit with 16-22-25-32 mm grid 2 spindle speeds: 1500/3000 rpm WESCOTT drill chuck 1 - 16 mm CE compliant Njdpfx Ajycg U Ejhvocp Work table dimensions: 287 x 550 mm Longitudinal travel: 200 mm Vertical travel: 160 mm Cross travel: 125 mm Three-phase motor power: 1.8 kW, 400 V, 50 Hz

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. Njdpfx Asu Itk Rjhvocp The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. The machine requires a compressed air connection of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Ncodpfx Ahoynv E Rovsp Maximum drilling hole height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly.

Condition: new, Year of construction: 2020, table load: 60,000 kg, load capacity: 60,000 kg, DEMMELER DRALT 2500 tilting rotary table. New, newer used stored in heated warehouse. 2,500 x 2,500 mm, 60 ton. Ncedewdiwajpfx Ahvep Linear travel 2,500 mm. Tilting 10°. Continues rotating. Linear measuring system Heidenhein LC 185.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 15,000 kg, spindle diameter: 150 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 3,000 rpm, table length: 2,000 mm, table width: 1,800 mm, drill spindle length: 900 mm, HEIDENHEIN iTNC 530. ATC 60, X= 4.000 mm. Y= 3.000 mm. W, Tower= 2.000 mm. Z, Spindle= 900 mm. Ncedpfsv U D Ntex Ahvep Rotary Table 1.800 x 2.300 mm, 15 Ton.

Condition: used, Year of construction: 1994, used, in good condition with base cabinet – drawers, incl. various drill bits / mobile Make: Rexon Model: OPTI B20T / RDM80B Year of manufacture: 1994 Machine no. Spindle taper MK2 Keyed drill chuck 20 mm Throat 150 mm Speed settings: 12 steps Table size 250 x 250 mm Drill table tiltable +45° – -45° Space requirement approx. 700 x 600 x 1000 mm Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Sale as inspected, function tested without overhaul, without guarantee or warranty Ncsdpfsythdisx Ahvjp

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 16,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, The machine is in good technical condition, powered and can be tested. Control system Siemens SINUMERIK 840D, milling head HUI 50, 3 floor plates 6000x2000 mm, AVN 80 pcs. Work spindle diameter: 150 mm X-axis: 16,000 mm Y-axis: 4,000 mm Z-axis: 1,000 mm Ncedpoytdtmefx Ahvep W: 800 mm AVN: 80 pcs

Condition: excellent (used), IM Very good condition. Nsdpfx Aoytc Naohvecp

Condition: like new (used), Year of construction: 2022, operating hours: 2,700 h, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 3,000 rpm, total height: 4,600 mm, total length: 7,200 mm, total width: 6,050 mm, table length: 1,800 mm, table width: 1,600 mm, feed length W-axis: 800 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, workpiece weight (max.): 12,000 kg, overall weight: 35,000 kg, Equipment: cabin, WHN 13 P CNC machine, completely overhauled and modernized by Fermat. Equipped with HEIDENHAIN TNC 640 control system with handwheel. The machine features high-pressure through-spindle tool cooling. ISO 50 spindle taper. The machine is connected to power and can be tested under working conditions. It is in like-new technical condition, manufactured in 2022, with 2,700 operating hours. Nedpfx Ahjytbqijvocp

Condition: excellent (used), Year of construction: 2008, operating hours: 39,000 h, functionality: fully functional, drilling depth: 1,800 mm, drill diameter: 30 mm, Manufacturer: SFT Model: TBM 3-1500 Machine type: Deep hole drilling machine with BTA system Drilling diameter: 15 – 30 mm Drilling depth: 1800 mm Chip conveyor: included Control: SFT / PS 100 incl. control cabinet Frequency inverter: included Oil sump: included Coolant tank: 2,500 liters oil Coolant pumps: 3 units, each adjustable to 40 liters, 100 bar Signal beacon: included Tailstock: rotating and adjustable according to drilling length Clamping: hydraulic clamping operation Drill spindle: speed regulation available Paintwork: light grey / blue Loading station: automatic door Machine footprint: 7,000 x 1,200 mm Ncjdpfx Ahoynui Isvep Filter footprint: 3,000 x 800 x 1,250 mm Commissioned: late 2007 Recurring maintenance according to manufacturer’s specifications Available: end of March 2026 Operation: 2/3-shift operation

Condition: good (used), functionality: fully functional, The machine is in good technical condition; inspection is possible by appointment. Heidenhain i530, 1100 RPM, year of manufacture 1990, overhauled in 2005. Ncedpfxeyr Sbco Ahvjp

Condition: used, Morbidelli line boring machine, price Ex Works. Ncsdpfexp Hxcsx Ahvjp

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,000 mm, travel distance W-axis: 1,200 mm, MAKE: PAMA MODEL: SPEEDRAM 4 CATEGORY: Floor Type CNC Boring Mill YEAR OF MANUFACTURE: 1999 CNC CONTROL: Siemens Sinumerik 840C Spindle Internal Boring Spindle Taper: ISO 50 Boring Spindle Diameter: Ø 180 mm Spindle Speed Range: 2 – 1,600 rpm Spindle Motor Power: 100 kW Machine equipped with through-spindle coolant Working Capacity X Axis (Column Longitudinal Travel): 13,000 mm Y Axis (Head Vertical Travel): 5,000 mm Z Axis (Ram Cross Travel): 1,000 mm W Axis (Quill Stroke): 1,200 mm Ncodpfx Aeyari Ajhvsp V Axis (Table Cross Travel): 3,000 mm Ram Section Dimensions: 440 x 500 mm Machine equipped with Heidenhain linear scales on all axes Table & Floor Plates Rotary Table Dimensions: 4,000 x 4,000 mm Rotary Table Load Capacity: 80 tons Rotary Table Continuous Rotation: 360,000 positions, minimum angle 0.001° Number of Floor Plates: 2 Each Floor Plate Dimensions: 7,100 x 2,400 mm Total Floor Plate Area: 7,100 x 4,800 mm Accessories Chip conveyor Coolant tank with high-pressure pump for through-spindle coolant (CTS) 1 x 90° milling head, indexing every 2.5° (C axis) Spindle oil chiller and hydraulic unit Operation manuals and electrical schematics

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 620x560x1720 mm Weight 110 kg Ncedpfxjv A Hm Re Ahvop Total power requirement 0 kw