Used Super Max for sale (37,868)

Condition: used, mileage: 12,829 km, power: 375 kW (509.86 HP), first registration: 01/2023, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2022, total width: 2,550 mm, total height: 3,780 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes-Benz Arocs 2681 L 6x2 Wiedemann Super 2000 8.0/5.0/1.0, Water Recovery System Bodywork * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling * 14,000-liter tank capacity * 1,000-liter fresh water compartment * 5,000-liter rinse water compartment * 8,000-liter sludge volume * Tank emptying by tilting at 45° Vacuum System * Wiedemann & Reichhardt KW 4000 * 4,000 m³/h * approx. 25 m suction hose DN 125 High-Pressure System * Uraca P3-45 65 413 liters/min at 175 bar * approx. 180 m HP hose DN 32 * Hydraulic reel with approx. 80 m DN 13 Iedpfevh H I Esx Adnoa Additional Fresh Water System * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded reel with 15 m pressure hose DN 10 Special Features * Sludge tank made from material 1.4301 (stainless steel) * Suction and HP boom * 5-liter warm hand wash unit * Stainless steel toolbox * Control cabinet with display * Engine start controllable from the cabinet * NMV start controllable from the cabinet * Radio remote control with display * Equipment cabinet with two doors – on both sides * Hose storage tray * Noise insulation in pump compartment extended upwards * LED work lights * Central lubrication system Technical Data * Unladen weight: 19,170 kg * GVW (gross vehicle weight): 26,000 kg * Length: 9,970 mm * Height: 3,780 mm * Width: 2,550 mm Special Equipment: Axle load measuring system, front axle load 9.0 t, audio system: digital radio DAB/DAB+, right exterior mirror with maneuvering function, 220 Ah battery, interactive multimedia cockpit, electric pre-wiring in cab 24V/100A, driver assistance systems: high beam assistant and cornering light, traffic sign recognition, movable cab access, front suspension: 9.0 t, 4-leaf, remote online status check function, without trailer brake, without trailer coupling, speed limiter, 16-speed gearbox - type: G 280-16, independent gearbox lock, rear axle crown wheel 300, 3-piece mudguard with splash protection, 430 L aluminum fuel tank, right side, cooler/fridge, high-temperature cooling capacity, reinforced engine brake, steered liftable tag axle 9 t, navigation system, PTO - smooth flange, PTO independent and dependent on clutch MB 1,2, PTO MB 131-2c, programmable special module, rear frame overhang 1650 mm, rain sensor, acoustic reverse warning and exterior warning light, additional remote-control key (2), circuit breaker, seat covering: passenger and driver seat velour, seats: armrests for both passenger seats, comfort suspension seat for driver and passenger, exterior sun visor, additional 12V socket, 24V/25A socket in passenger footwell, additional 24V socket in passenger footwell, preparation for 4 surround cameras (display in dashboard monitor), preparation for additional headlights, twin-plate clutch, transmission oil cooler Further Features: Emission standard EURO 6, axle configuration: 6x2, heated front/entry mirror, 24V/15-pin trailer socket, Arocs 5, exhaust to right exterior, batteries mounted side-by-side, compressed air connection in cab, steel air tanks, air unit with condensate monitoring, medium air unit, automatic switch-on.

Condition: used, maximum load weight: 37,575 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 09/2022, next inspection (TÜV): 10/2025, total width: 2,540 mm, Equipment: ABS, More vehicles available at Extract from the equipment. Complete equipment details on request. Gooseneck: Gooseneck with beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform: * Telescopic loading platform with rear bevel approx. 1,000 mm x 8° * Between 1st and 2nd axle, one pair of fixed wheel recesses with covers, approx. 1,610 x 700 x 400 mm (L x W x D) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * 4 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs on the external frame for attaching tension straps (LC 2,000 daN) * Incl. 3-piece removable galvanized covers over the wheel recesses – max. point load approx. 3.5 t / piece Iedpfsxfx R Ajx Adnja Axles: * BPW axles and suspension, 2 rigid axles, 3rd axle steering * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve * Axle tools Tyres: * Tyres 235/75 R 17.5 Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Brake system: * Brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: * HRM metallization (High Resistance Metallisation), complete steel construction blast-cleaned to SA2.5-SA3. Afterwards hot finished with ZINACOR 850 (Zinc 85% - Alu 15%) * High-quality 2-component (2K) single-color top coat in RAL 3002 carmine red Accessories included: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Galvanized extensions, extendable by approx. 230 mm per side * Galvanized folding supports under the rear bevel of the loading platform * A bracket for a beacon at the rear of the trailer * Plug-in aluminium side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H), the rear galvanized stanchions are removable (superstructure length approx. 2,560 mm) * 1 galvanized toolbox, integrated into the beveled gooseneck * Hardwood bumper on the gooseneck rear wall to the loading platform * 3 pairs of WADER container pockets in the loading platform for one 20' (30') or one 40' container * 5 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm on the external frame of the loading platform * Hardwood extension planks, maximum permissible load on an area of approx. 200 x 200 mm up to approx. 3.5 t * One galvanized holder for the extension planks, left and right under the loading platform * Sanded paint layer as anti-slip on the chequer plates, over the kingpin and the loading platform * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light * Load pressure gauge for axle load determination including load chart * 5 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * Storage for max. 7 pairs of plug-in stanchions, approx. 100 x 50 mm, on the front wall * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, incl. approx. 48 mm thick hardwood covering, incl. electro-hydraulic unit. Ramp with hydraulically folding/unfolding ramp sections. Hydraulic lifting gear and hydraulic lateral movement, maximum load

Condition: used, mileage: 387,424 km, power: 368 kW (500.34 HP), first registration: 10/2021, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ESP, ASR, double tank, fridge, independent heater, MaxCruise LKA - Lane Keeping Assistance Ijdpfx Adoxy Unajnoa EBA - Emergency Brake Assist

Condition: used, mileage: 67,867 km, power: 338 kW (459.55 HP), first registration: 08/2024, fuel type: diesel, empty load weight: 8,581 kg, maximum load weight: 10,919 kg, overall weight: 19,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2024, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, parking heater, Color: White, Unladen weight: 8,581 kg, Gross vehicle weight: 19,500 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/70 R22.5, Leaf spring - air suspension, Retarder, Fifth wheel coupling: JOST JSK37C-Z 150, -610 mm, EBS - Electronic Braking System, ESP - Electronic Stability Program, Automatic air conditioning, Auxiliary air conditioning, Adaptive Cruise Control (ACC), Seat heating, LED headlights, Headlight cleaning system, Automatic lights, Headlamp height adjustment, Radio, Rain sensor, Power steering, Mechanically adjustable steering column, Anti-theft alarm, Electric windows, Roof hatch, Roof spoiler, Fog lights, Electrically adjustable and heated exterior mirrors, Electric curb mirror, Wide-angle mirror, Tire pressure monitoring, Immobilizer, Central locking, Windshield, Refrigerator, Axle load indicator, Hill Hold Control (HHC), LED daytime running lights, 1x15-pin connection socket, Idle running function, Telematics system, Lane departure assistance (left/right turning assist), Side skirts, Upper and lower bunk, EMISSION ZONE COMPLIANT UNTIL 2030! For more information: Thijs van der Linden, EMISSION ZONE COMPLIANT UNTIL 2030! For more information: Thijs van der Linden Isdpfsxdg Imsx Adnea

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning length: 1,090 mm, spindle speed (min.): 4,500 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 1,090 mm, spindle nose: A 2-6, CNC Turning Milling Centre with 2nd spindle and lower turret Control Fanuc 31i Model A Turning diameter 170 / 245 mm Turning length 1090 mm Spindle bore diameter 71 / 51 mm Spindle nose A 2-6 Spindle nose sub spindle A 2-5 Turning speed 4.500 R/min Ijdpfx Adsxxlplonsa Turning speed sub spindle 6.000 R/min Milling head speed 12.000 R/min Movement X-axis 455 mm Movement Y-axis +70/-70 mm Movement Z-axis 1090 mm B-Axis travel 230° C-Axis indexing 0,001° Tool Taper Capto C6 Tools in tool magazine 40 Bar feeder: LNS Alpha SL65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total length: 5,500 mm, total height: 2,000 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 400 mm, product width (max.): 650 mm, compressed air connection: 6 bar, film width: 650 mm, Manufacturer: Kallfass Verpackungsmaschinen GmbH Model: Super Wrap 650 De Luxe In-Line Bundling Machine Year of manufacture: 2009 Dimensions: approx. 3160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical specifications: Film: Flat film, up to approx. 120 µm Film roll width: max. upper 650 mm, lower 620 mm Working height: 815 - 915 mm Passage width: 650 mm Passage height: 100 - 400 mm Power supply: 400 V three-phase Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle Isdsxxlhnspfx Adnsa This particularly versatile bundling machine operates with two flat film rolls. Product infeed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and therefore maintenance-free. Film rolls are simply placed, and film feeding is motor-driven. Manufacturer: Kallfass GmbH Model: Shrink Tunnel Standard 650 NT Year of manufacture: 2009 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 400 mm Tunnel outfeed, extended: approx. 500 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 26.5 kW Rated current at 400V: 38.5 A in stand-alone operation Powerful, universally applicable shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings underneath for precise control of hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculating air system, tunnel hood with additional double-chamber system, and significantly improved all-round insulation ensure energy-efficient operation. Equipped with infinitely adjustable rod chain conveyor. Inspection and demonstrations are possible at our premises by appointment. Function guarantee, no warranty.

Condition: used, mileage: 309,800 km, power: 315 kW (428.28 HP), first registration: 05/2001, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, next inspection (TÜV): 04/2025, gearing type: semi-automatic, emission class: euro3, Year of construction: 2001, total width: 2,550 mm, total height: 3,950 mm, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Actros 2543 6x2 Wiedemann Super 2000 10.0/6.5 Water Recovery Vehicle #509 Body Wiedemann enviro tec Super 2000 10.0/6.5 water recycling system 10,000 liter tank capacity (sludge) 6,500 liter clean water tank (flush water compartments) Discharge by tilting the tank 45° Ijdpewtwwmjfx Adnea Vacuum System Wiedemann & Reichhardt KW 3000 Approx. 3,000 cbm/h, approx. 20 m suction hose DN 150 Suction pipe DN125 with channel nozzle High Pressure System URACA P3-45 G 70 approx. 475 l/min at 150 bar Approx. 200 m high-pressure hose DN32 Hydraulic high-pressure hose reel with approx. 60 m DN13 Special Features Suction and HP boom 5 liter hand-washing station Stainless steel toolbox Analog control cabinet Radio remote control Tool compartment - left Hose storage Pump compartment sound insulation (extended) Work lights Central lubrication system Waste bin Various brackets Cold water hand-washing device Cable winch Rotating beacon front and rear Technical Data Unladen weight 17,850 kg Gross vehicle weight 26,000 kg Length 10,700 mm Height 3,950 mm Width 2,550 mm For further detailed information and/or pictures, please contact us directly. A large selection of further vehicles for SALE or RENT is available at: Specifications, prior sale and errors excepted. The buyer is obliged to independently verify the condition and equipment of the item. Sale exclusively according to our terms and conditions and without any warranty.

Condition: new, maximum load weight: 90,700 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 Iodew Tgp Depfx Adnja 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle

Condition: used, mileage: 323,060 km, power: 368 kW (500.34 HP), first registration: 06/2021, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ESP, ASR, double tank, fridge, independent heater, MaxCruise LKA - Lane Keeping Assistance EBA - Emergency Brake Assist Isdpfx Aexy Um Aednoa

Condition: used, mileage: 86,745 km, power: 368 kW (500.34 HP), first registration: 05/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2026, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FORD F-MAX 500 CPP Low-Liner in absolute full specification First registration: 05/2023 Mileage: only 86,745 km Mega-Cab ComfortPlus (CPP), Luxury Pack LUX, air-suspended cab, 1 sleeper berth, comfort driver’s seat, comfort passenger seat, storage compartments at rear wall (upper), automatic climate control with independent stand air conditioning, multifunction leather steering wheel, LED dipped headlights, winter package with electrically heated windscreen, light & rain sensor, TRUCK navigation, STABO CB radio, dashboard storage table, deep sun visor with 2x LED high beams, 2x LED beacons, illuminated roof lamp box ZF automated TRAXON 12-speed gearbox ZF retarder Aluminium diesel tank 510 and 410 litres Tyres: Iedpfxsxxf Iho Adnea Front axle: 355/50 R 22.5 Rear axle: 295/60 R 22.5 Fifth wheel height approx. 980 mm Full safety package with ABS, SEP, ASR, lane departure assistant, emergency braking assistant, adaptive cruise control (ACC), tyre temperature monitoring, tyre pressure monitoring system RENTING is the new BUYING—available now with us as a full-service rental or immediate leasing-----

Condition: good (used), mileage: 1,052,560 km, power: 340 kW (462.27 HP), first registration: 01/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, cruise control, electric window regulation, fog lights, fridge, parking heater, second fuel tank, soot filter, spoiler, = Additional options and accessories = - Aluminum fuel tank - Leaf suspension - Brake booster - Roof spoiler - Electrically adjustable exterior mirrors - EPS - Low noise - Particulate filter - Radio/CD player - Sleeper cab - Side door - Auxiliary heater - Toolbox = Further information = Front axle: Steered; Suspension: Leaf suspension Rear axle: Suspension: Air suspension Unladen weight: 8,602 kg Payload: 11,898 kg Gross vehicle weight: 20,500 kg Technical condition: Good Visual condition: Good Reference number: 45 Contact Emad Al Shogran for further information. Vehicle number: 45 DAF XF 460 Super Space / Stationary air conditioning / Euro 6 VIN: XLRTEH4300G0132161 Transmission: Automatic Suspension: Leaf/Air Air Conditioning Stationary air conditioning Engine brake Cruise control Refrigerator box Auxiliary heater Distance keeping assistant Lane departure warning assistant Isdpfx Ajwmf Exjdnja Emissions standard EURO 6 2 x tank = Company information = Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Mrs. Sabine Faust Email.

Condition: used, mileage: 90,000 km, power: 380 kW (516.66 HP), overall weight: 26,000 kg, color: orange, axle configuration: 3 axles, first registration: 09/1994, Equipment: crane, Here we offer a mobile crane body from Palfinger type PK 680 TK. The crane has been completely refurbished and repainted. Many hoses have been renewed. High control from the cabin and radio remote control. * Palfinger PK 680 TK * Radio remote control * Pulpit control * 26,7 m ? 390 kg * 23,2 m ? 570 kg * 19.8 m ? 900 kg * 16,4 m ? 1,170 kg * 12,9 m ? 1,590 kg * 9.4 m - 2,410 kg * Cable winch with 3,200 kg * Extendable counterweight * Completely overhauled and repainted * Many hoses renewed Ijdpewa Hyqofx Adnoa * Weight approx. 13,000 kg * Financing available through our partner banks, we will be happy to help you. * We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessories without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.

Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,720 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Mercedes Arocs 2851 6x2-4 Wiedemann Super 1000 8.0/4.0/1.0-320, water reclaimer superstructure * Wiedemann enviro tec * Super 1000 8.0/4.0/1.0-320 Water recycling * 15,000 liter tank size * 500 liters of fresh water * 4,000 liters of rinsing water * 8,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 4000 * approx. 4,000cbm/h * approx. 25m suction hose DN 150 High pressure system * Uraca P3-45-65 with approx. 413 liters/ at 175 bar * approx. 180m HP hose DN 32 * Hydraulic flushing hose reel with approx. 80m DN 13 Additional fresh water system * Speck NP 25/50-150 with approx. 50 l/min at 150 bar * Spring-loaded reel with 15m DN 10 pressure hose Special features * Sludge tank made of material 1.4301 * Suction and HP boom retractable (300mm shorter) * Attachment point for fall arrester * 5 liter hand washing device warm * Stainless steel tool box * Control cabinet with display * Motor start can be switched from the control cabinet * NMV - start switchable from control cabinet * Radio remote control with display * Equipment cabinet with two roller shutters - on both sides * Large heated closet with roller shutters * Hose storage Iedpfjvh H Rtsx Adnea * Sound insulation of the pump room raised * LED work lights * Central lubrication system Technical data * Unladen weight 19,505 KG * GGW 26,000 KG * Length 10,170 mm * Height 3,720 mm * Width 2,550 mm Special equipment: Axle load - measuring device, Axle load front axle 9.0 t, Audio system: Digital radio DAB / DAB+, Exterior mirrors right with maneuvering position, Battery 220 Ah, Cockpit multimedia interactive, Electrical pre-installation in cab 24V / 100 A, Driver assistance system: High beam assistant and cornering light, Driver assistance system: Traffic sign recognition, Cab: Cab access movable, Suspension: Front springs 9.0 t, 4 leaf, Remote online function, Fzg. without trailer brake, vehicle without trailer coupling, speed limiter system, transmission 16-speed - type: G 280-16, transmission lock independent of transmission, rear axle disk wheel 300, mudguards 3-piece, mudguards 3-piece with splash guard, fuel tank: 510 ltr. aluminum, right, cool box / refrigerator, cooling capacity for hot climate zones, reinforced engine brake, trailing axle 9 t steered, can be unloaded, navigation system, power take-off - smooth flange, power take-off independent of transmission and clutch-dependent MB 1.2, power take-off MB 131-2c, parameterizable special module, wheelbase variant 4200 mm, frame overhang 1650 mm, rain sensor, reversing alarm acoustic and hazard warning light (warning signal outside), key with remote control additional (2), automatic circuit breaker, seat cover / upholstery: Velour front passenger seat, Seat cover / upholstery: Velour driver's seat, Seats in cab: Armrests on both sides of front passenger seat, Seats in cab: Swivel front passenger seat comfort, Seats in cab: Driver's seat comfort suspension seat, Exterior sun visor, Additional 12 V socket, 24 V / 25 A socket in front passenger footwell, Additional 24 V socket in front passenger footwell, Preparation for 4 surround view cameras (display in on-board monitor), Preparation for auxiliary headlights, Twin-plate clutch, Oil cooler transmission For more detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale

Condition: new, maximum load weight: 40,790 kg, overall weight: 59,000 kg, axle configuration: 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and soon-available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Low bed: - Low bed with external beams, extendable design, SUPER LOW version, approx. 7,550 mm long - Low bed with fixed hardwood flooring, approx. 40 mm thick, and mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current bed length - 7 pairs of lashing rings, foldable outward (approx. LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolt-on RUD rings Rear running gear: - Rear running gear with closed outer frame, checker plate floor and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable outward (approx. LC 10,000 daN) - 1 pair of flat lashing rings in the trough (approx. LC 10,000 daN) - 2 pairs of flat lashing rings in the trough (approx. LC 16,000 daN) - 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE, all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and lock pins to secure in raised position - Final coating of axles with 2 coats of 2-component paint, single color in grey 34-0260 - Technical axle load: 12,000 kg each - Hydraulic axle compensation - Axle tools Tyres: - Tyres 245/70 R 17.5 3PMSF – brand of our choice. Load index (146/146F) Braking system: - Braking system according to EU regulations with EBS-E (2S2M) without interconnected lines to the tractor unit Electrical system: - Electrical system according to EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15 pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Steel structure: - Steel structure made of high-strength fine-grained steels Ijdpfew Tprbex Adnja - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with a wheel blasting machine after welding - Second abrasive blasting with corundum for optimal adhesion of the coating system - Final coating with 2 layers of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL - Rear section metallized and painted in RAL 9010 (pure white) - Rims in silver-grey - No metallic paintwork possible - Paint structure tested in salt spray test according to ISO 9227-NSS - Sealing of cavities with special wax Accessories included: - Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the outer beams - Without container locks - 3.5-inch king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel carrier in front of the front wall - At the galvanized front connection bar, yellow-red air couplings - Remote steering from front and rear via cable remote control with push buttons, with single-track monitoring of axles (without installation in the tractor unit) - Electro-hydraulic unit - On the gooseneck, plug-in aluminium side and rear walls, approx. 2,000 x 400 mm (L x H)

Condition: used, mileage: 109,050 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, overall weight: 5,000 kg, first registration: 12/2020, emission class: euro6, color: white, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle no.: 2243 ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany. Always over 400 vehicles immediately available at the best price – the largest selection. More than 1,000 satisfied customers per year – top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Thermo King V300 MAX Refrigerant: R404A According to the manufacturer (Thermo King), the refrigeration unit can achieve temperatures down to max. -20°C under optimal conditions. Actual performance will depend strongly on usage and circumstances and is not guaranteed (loading area size, insulation, frequency of door opening, outside temperature, etc.). ---- * EXCELLENT CONDITION * 1 previous owner * German vehicle * Fully documented service history exclusively at Mercedes-Benz * Next service due in 485 days * New brake discs and pads front and rear * Body: Deep-freeze box * Thermo King freezer (-32° Celsius to +22° Celsius) * Gross vehicle weight: 5.00t * Rear portal doors * Side portal doors (right and left) * Boarding aid * Regulated air conditioning (Tempmatic) * Navigation system for MBUX multimedia system * MBUX multimedia system (7" touchscreen) * Smartphone integration (Apple CarPlay, Android Auto) * DAB radio (digital radio reception) * Digital tachograph * Comfort driver's seat * Front PTO with bracket for optional compressor * Fuel filter with water separator * Chassis: Stabilization level II * Rear underrun protection Iodpfxov E Ixye Adnja * 1 DIN slot front under headliner * Acoustic package * Battery master switch, single-pole * Speed limiter system 90 km/h * Front cup holder * Folding lid for storage compartment * Folding covers for left/right storage compartments * Terminal strip for electrical connections (driver’s seat box) * Spare wheel with roadworthy tires * Spare wheel carrier under rear frame incl. jack * Windshield wipers with rain sensor * Rear wall lining * Active Brake Assist * Lane Keeping Assist * Crosswind Assist * Mercedes-Benz emergency call system * Engine: 2.1 L – 120 kW CDI * Wheelbase: 4,325 mm * Low emissions according to Euro 6 standard * Gross vehicle weight: 5.00 t * New roadworthiness test upon request (HU/AU) ----Warranty & "TÜV Profi Check" are of course available! We are happy to accept your vehicle as a trade-in! We can also provide a personalised financing or leasing offer! No down payment, repayable at any time, and with special repayments possible. Share your requirements with our sales team – we are happy to advise you. ----Arrange a test drive appointment and convince yourself of the quality of our vehicles. Appointment times: Mon.-Fri. 8:30 a.m. – 6:00 p.m., Sat. 9:30 a.m. – 1:30 p.m. ----Also visit us at . We look forward to your visit! ----Subject to errors and changes. The equipment offered online is not part of the contract. Equipment must be inspected on site.

Condition: used, mileage: 450 km, power: 367 kW (498.98 HP), first registration: 09/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 2, Equipment: air conditioning, onboard computer, parking heater, spoiler, With us, you drive free of charge for a quarter of a year upon signing the contract until .2025; delivery takes place at the latest by March 30, 2026, or earlier, while vehicles from our contingent are available. Lease-purchase with a monthly rate of €1,579 over 36 months: we cover installments 1-3, you cover installments 4-36. After the term: purchase at residual value, return, or delivery of a new vehicle. Full-service leasing with subsequent purchase option possible. One-time transfer and preparation fee applies. Other configurations and versions available. Our general terms and conditions apply. Subject to prior sale. Financial service offers subject to positive credit check and valid only for German commercial customers. For more information, see o. Features: full cladding, rentable, high roof, roof hatch, air suspension seat, auxiliary tank, sun visor, tachograph, day registration, 2 doors, manufacturer's warranty, green emissions sticker (4), rental possible, electric windows, seat heating, roof spoiler, rear-wheel drive, new general inspection/emissions test (HU/AU). Ijdowmr Dzepfx Adnea

Condition: like new (used), Year of construction: 2019, operating hours: 5,348 h, functionality: fully functional, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, controller manufacturer: Haas, total height: 2,550 mm, total length: 2,440 mm, total width: 2,000 mm, table width: 356 mm, table length: 1,000 mm, table load: 230 kg, overall weight: 2,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Haas MiniMill 2 – CNC Universal Machining Center (2019) – Excellent Condition, Only 5348 Hours For Sale: Haas MiniMill 2 Year of manufacture: 2019 Condition: Very well maintained, ready for immediate operation Operating hours: Only 5348 h Location: Graz, Austria Highlights & Equipment: This compact, high-performance Haas MiniMill 2 impresses with strong performance in a small footprint – ideal for precision milling, single-part manufacturing, series production, or training applications. Equipment & Features: - Haas NGC control – modern, intuitive user interface - 15'' color LCD, dedicated keypad & multifunction jogwheel - One-touch operation for fast handling - Ethernet & USB for fast data transfer - M130 media player – integration of videos/instructions - Haas Connect – mobile monitoring - WLAN connectivity - Power failure detection module - Chip conveyor - Automatic air gun - Coolant pump - Operating manual available Technical Data: X-axis travel: 508 mm Y-axis travel: 406 mm Z-axis travel: 356 mm Spindle taper: ISO 40 Spindle speed: 1–6,000 rpm Max. workpiece weight: 230 kg Table size (W x L): 356 × 1000 mm Axes: 3 Electrical connection: 400 V Machine weight: 2315 kg Machine dimensions (L × W × H): 2440 × 2000 × 2550 mm Iodoxywhcepfx Adnoa Condition & Images & Video Images and videos of the machine in operation, demonstrating its excellent technical condition, are available and can be provided upon request. A viewing appointment can be arranged at any time.

Condition: excellent (used), spindle bore: 140 mm, turning diameter: 800 mm, GURUTZPE lathe, model Super AT 400/10000, with 10,000 mm distance between centres, prepared for spindle manufacturing, equipped with 2 heads featuring whirlwind system, swing over bed 820 mm, over cross slide 550 mm, spindle bore diameter 140 mm, 24 speeds from 9–500 rpm, with a reducer from 1–63 rpm, overall in good condition. Iedpoxytqgjfx Adnea

Condition: used, mileage: 2,000 km, power: 390 kW (530.25 HP), first registration: 06/2024, overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2023, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Internal number: #312 MAN TGS 35.510 8x4 BL Wiedemann SUPER 2000 Spacer Chassis MAN * TGS 35.510 * 8x4-4 BL * 530 HP/390 KW * EURO 6 * 3,500 mm wheelbase * Approx. 3000 liter fuel tank * 385/55 R 22,5 * 315/70 R 22,5 * 315/70 R 22,5 * 385/55 R 22,5 * Rotating beacons * Air conditioning * Navigation system * Trailing steering axle Wiedemann enviro tec body * Super 2000 Spacer 11.5/5.0/1.0 Water recycling * 17,500 liter tank size Iedpfx Adovh H Npjnoa * 11,500 liters of waste water * 5,000 liters of fresh water * 1 liter water chamber * Emptying by tilting the tank 45° Vacuum system Wiedemann & Reichhardt KW 4000 * 4.000cbm/h 106kW * Galvanized piping in DN 150 * approx. 25m suction hose DN 125 * Suction pipe DN 125 with duct folder * Silencer High-pressure system Uraca P3-45 65 406 liters/ at 175 bar * approx. 180m HP hose DN 32 * Hydraulic flushing hose reel with approx. 80m DN 13 Additional fresh water system Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded reel with 15m pressure hose DN 10 ? Special features Sludge tank and water tank made of material 1.4301 * Suction and HP boom * 20 liter hand washing device warm * Stainless steel tool box * Control cabinet with display * Motor - start switchable from control cabinet * NMV - start switchable from control cabinet * Radio remote control with display * Device cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump compartment raised * LED work lights * Central lubrication system Technical data Unladen weight 21,995 KG * GGW approx. 32,000 KG * Length approx. 11,200 mm * Height approx. 3,900 mm * Width approx. 2,550 mm For more detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: new, maximum load weight: 37,710 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and shortly available vehicles, on our website. Excerpts from the equipment list. Full equipment details are available upon request. Gooseneck: - Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor approx. 30 mm thick Loading Platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Including 3-piece removable galvanized covers over the wheel recesses (W = approx. 670 mm - max. point load 5 t/each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for hooking in tie-down straps (LC 2,000 daN) Axles: - BPW axles and suspension, 2 rigid axles, 3rd axle steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Tyres: - Tyres 235/75 R 17.5 3PMSF – brand of our choice Landing Gear: - JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: - Wabco brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: - Electrical system according to EU regulations - 24 Volt ASPÖCK-NORDIK lighting (ASS3) - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, and 15-pin sockets in accordance with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Ijdpfx Adsw Tpq Renja Paintwork: - Top-quality and durable corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single color in RAL 3002 carmine red - Rear section metallized and painted in RAL 9010 (pure white) Accessories Included: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - Spare wheel bracket in front of the front wall - On the galvanized front connection strip, yellow-red air couplings - 4 wheel chocks with holder on the front wall - Mounting for aluminum loading ramps at the rear of the gooseneck - Galvanized folding supports under the rear slope of the loading platform - Bracket for warning beacon at the rear of the trailer - TPMS tire pressure monitoring system in accordance with ECE R 141 - Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer - On the gooseneck and rear panel left and right, holder for warning signs each including socket - 1 hardwood bumper on the rear wall from gooseneck to loading platform - Galvanized holder for extension planks left and right under the loading platform - 4 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the rear central beam (LC 10,000 daN) - On the gooseneck, plug-in aluminum side and rear boards, approx. 2,440 x 400 mm (L x H) - The rear galvanized plug-in stanchions are removable (length of the body approx. 2,560 mm) - A tool

Condition: excellent (used), ALP passenger lift Here we offer you an ALP passenger lift. ALP passenger lift PHCI 800 EU 1 Maximum working height 8m, payload 140kg, for inside and outside The ALP lift type PHC800 is a particularly compact passenger lift that impresses with its extremely small space requirement and particularly lightweight construction. The transport dimensions are also so compact with a height of 1.98m and a width of just 0.77m that the model easily fits through a standard door. Despite this space-saving design, the PHC 800 impresses with its high performance. The working height of the ALP lift PHC800 is 8m and that with a maximum payload of 140kg. The robust aluminum construction and the hot-dip galvanized chassis ensure enormous stability and maximum durability. Like all ALP passenger lifts, the PHC series is available with either hand or foot control and can be used flexibly both indoors and outdoors. Developed and built in accordance with the applicable safety regulations, all PHC lifts also bear the CE mark. Areas of application: Iodpjvx Th Hsfx Adnoa The ALP passenger lift PHC 800 can be supplied with various accessories and is therefore specifically suitable for various areas of application. Working height: 8.00 m Standing height: 6.00 m Payload: max. 140 kg Height: 1.98 m Floor area (indoor use): approx. 1.41 m x 1.39 m Floor area (outdoor use): approx. 2.43 m x 2.28 m Own weight: approx. 280 kg Maintenance platform for 1 person: ALP PHCI 800 Approved for indoor and outdoor use Version EU1 Drive / Motor: Single-phase AC electric motor 230V/50Hz 1.5KW Control 12V/13V DC Supply cable 3x1.5 Protection class IP 55 Type: PHCI 800 EU 1 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: new, maximum load weight: 33,750 kg, overall weight: 47,000 kg, axle configuration: 2 axles, Equipment: ABS, More vehicles available at request. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: Gooseneck in SNT design to optimize the loading deck length, approximately 3,750 mm long. Gooseneck hydraulically liftable/lowerable and detachable. Technical king pin load: 23,000 kg. Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4. Lowbed: Lowbed with external beams in extendable SUPER LOW design, approximately 6,850 mm in length. Lowbed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking system. The supply lines are protected inside the extendable beams and automatically adjust to the respective length of the lowbed. 5 pairs of lashing rings, foldable outward (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings. Rear running gear: Rear running gear with closed outer frame, checker plate covering, and continuous prism-shaped excavator trough, approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings, foldable outward (LC 10,000 daN). 1 pair of lashing rings lying in the trough LC 16,000 daN. 1 pair of lashing rings lying in the trough LC 10,600 daN. 2 pairs of stake pockets for insert stakes approx. 100 x 50 mm in the outer frame. PENDLE-AXLE: Pendle-axle, all axles hydro-mechanically forced steered. Hose rupture valve on the axle compensation cylinder with automatic reset function. Hydraulic cylinders with shut-off valves and interlock pins for securing in raised position. Axles finished with 2 coats of 2K paint in single-tone FAY-Grey-34-0260. Technical axle load: 12,000 kg each. Hydraulic axle compensation. Axle tool. Tyres: 245/70 R 17.5 3PMSF – make of our choice. Load index (146/146F) TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Brake system: Wabco brake system compliant with EU regulations with EBS-E (2S2M), without connection lines to tractor unit. Electrical system: Electrical system according to EU requirements, lighting 24 Volt ASPÖCK-NORDIK (ASS3). All side marker LED lights flash synchronously with indicators. ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098. Iedpexbmn Uefx Adnja Steel construction: High-strength fine-grained steel structure. Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa). Paintwork: Complete steel structure is automatically blasted with a turbine system after welding. Secondary blast treatment with corundum for optimum coating adhesion. HRM-metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection. Final finish with 2 coats of 2K top coat, single-tone in RAL 3002 Carmine Red, according to RAL System 841GL. Includes the following additional equipment: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Rear and front steering by wired remote control via push-buttons, with axle single-track monitoring (without installation in tractor unit) - Electro-hydraulic power pack (± 45kg) - 2 pairs of bolt-on container locks on the outer beams. Including 2 pairs of container locks for 1x 20' or 1x 40' container - On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized insert stakes are removable. (Body length approx. 2,560 mm) (± 46kg) - Hydraulic connections from gooseneck to lowbed with multi-coupling in place of screw couplings. - O

Condition: new, maximum load weight: 36,245 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the specifications. Full equipment details available upon request. Loading Area: * Loading platform with hardwood floor and approx. 1,000 mm x 8° rear bevel * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of fold-out external lashing rings (LC 5,000 daN) * 2 pairs of fold-out external lashing rings (LC 10,000 daN) * Cutouts in the outer frame for securing straps (LC 2,000 daN) Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW air-suspended axles * Disc brakes (approx. 377 mm) * Raise/lower function (ET 120) * Axle tools Tyres: * Tyres 435/50 R 19.5 – brand at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit via standardised EBS interface as per ISO 11992. The tractor unit must be able to transmit and display this data for correct functionality. Iedpfew Tpqqox Adnsa Brake System: * Wabco braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor Steel Construction: * High-strength fine-grain steel frame construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system compliant with EU regulations * Lighting: 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection panel with sockets: 24N, 24S & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal adhesion of the coating system * Complete vehicle chassis metallised with ZINACOR 850 (85% zinc / 15% aluminium) for best possible corrosion protection * Final painting with two coats of 2K topcoat, single colour, RAL 3002 Carmine Red according to RAL 841GL * Rear section metallised and painted RAL 9010 (Pure White) * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint not possible Including the following additional equipment: * Yellow-red air couplings on galvanised front connector strip * 4 wheel chocks with holder * 2-inch king pin * Loading platform with heavy-duty hardwood floor * 1 spare wheel carrier under the loading platform, right in driving direction * Galvanised folding supports under the rear loading platform bevel * 9 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * 1 galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Central beam with painted sand layer for anti-slip protection * 1 stainless steel toolbox (INOX), crosswise under the loading platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container locks in the loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container * 3 pairs of transverse stake pocket strips mounted in the platform, for plug-in stakes approx. 100 x 50 mm * Holder for up to 9 pairs of plug-in stakes, approx. 100 x 50 mm, bolted inside the front wall * 2 stainless steel (INOX) toolboxes under the loading platform left and right, approx. 600 x 350 x 600 mm * Holder for aluminium drive-on ramps, crosswise under the loading platform, behind the axles

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: Iodpfx Adoxf Silenja - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and soon available vehicles, on our website. Partial equipment list. Full specification available upon request. Loading Platform: * Low bed with external beams, extendable SUPER LOW design, length approx. 6,850 mm * Low bed with fixed hardwood flooring, about 40 mm thick, with mechanical locking system * Service lines are protected within the extendable beams and automatically adjust to the corresponding low bed length * 5 pairs of lashing rings, foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: Isdpfx Adexarl Nonja * Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm * Gooseneck hydraulically liftable/lowerable and detachable * Technical fifth-wheel load: 23,000 kg * For tractor units: 4 x 2, 6 x 2 Rear Chassis: * Rear chassis in short version with closed outer frame and checker plate cover * Chassis equipped with excavator trough, closed in the rear half to house air tanks * 2 pairs of lashing rings, foldable outward (LC 5,000 daN) * 1 pair of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, flat-mounted, on the front & rear of the chassis (LC 10,000 daN) Axles: * BPW axles, hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF * Manufacturer of our choice * Load index (146/146F) * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the truck via standardized EBS interface according to ISO 11992 * For correct display, the truck must be capable of transmitting and displaying this data Braking System: * Braking system compliant with EU regulations, with EBS-E (2S2M) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection rail with sockets 24N, 24S & 15-pin, compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel construction made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Coating: * Complete steel structure automatically shot-blasted after welding using a Grit Wheel System * Second blasting with corundum for optimal coating adhesion * HRM metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating with two layers of 2K topcoat, solid color in RAL 3002 carmine red as per RAL system 841GL * Wheels in silver * Rear section metalized and coated in RAL 9010 (pure white) * Metallic paint not possible * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Remote steering from front and rear via cable remote control with push-buttons, with single-track control of axles (without installation on tractor unit) * Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings * Electro-hydraulic power unit * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 40' container on the...