Used Suction Tube for sale (4,342)

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Iodpfeyx Irlex Ah Eetl Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: ready for operation (used), * Brand: AEG / Aviteq * Model: vibrating chute * On stock: 2 pieces * 1 x: length 3000 mm - diameter 500 mm * with: two pieces vibration motors of each 1,3 kW Itjdpfx Asywmb Ajh Ejl * 1 x: length 5900 mm - diameter 500 mm * with: two vibration motors of 2.3 kW each

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 76,447 h, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Average output: approx. 2,400 sheets/hour Bending capacity round tube R = 45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R = 35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Brass: 4 - 18 x 1.25 mm Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotation speed Z-axis: 900 °/s Rotation speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Measuring tolerance Y/Z/Q-axis: 0.1 mm Maximum reach at maximum acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Control: DOC 85C Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg Operating hours: 76,447 h Itsdpfoyzyh Dox Ah Eol EQUIPMENT BLM bar feeder BLM CARM 7 Note: The machine is sold without conveyor belt and safety fencing.

Condition: good (used), Load capacity: 125 kg Demag lifting motor (with chain hoist): Operated via Hubfix Width: 450 mm Height: 360 mm Depth: 220 mm Itedpfxsxat H Ij Ah Esl Weight: approx. 12 kg Condition: good, second-hand

Condition: good (used), Year of construction: 2002, Load capacity: 400 kg Net weight: 75 kg Width: 1350 mm Itedjxav U Uopfx Ah Eel Height: 1200 mm Depth: 280 mm

Condition: good (used), Year of construction: 2014, Lifting capacity: 1100 kg Net weight: 175 kg Itodox R Spfjpfx Ah Eel

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 32 kg, total width: 490 mm, total length: 575 mm, total height: 880 mm, type of input current: DC, tank capacity: 60 l, warranty duration: 24 months, We offer for sale a Universal Vacuum Cleaner Karcher NT 65/2 Tact2 Condition of the machine – Perfect, brand new unit Year of manufacture – 2024 Iedpfx Ahox Aux Rs Eotl Vacuum cleaner with TACT² system. Designed for removal of hazardous class M dust. Meets the highest European safety standards. Technical Specifications - Power supply parameters: 1 / 220–240 / 50–60 Ph / V / Hz - Airflow: 2 x 74 l/s - Vacuum: 254 / 25.4 mbar / kPa - Container capacity: 65 l - Container material: Plastic - Max rated power: 2760 W - Nominal diameter: ID 40 - Power cable length: 10 m - Sound pressure level: 73 dB(A) - Colour: anthracite - Weight without accessories: 24.5 kg - Weight with packaging: 31.332 kg - Dimensions (L x W x H): 575 x 490 x 880 mm Scope of Delivery - Drain hose (oil-resistant) - Automatic shut-off at maximum collected liquid level - Antistatic system - Metal suction tube, 2 x 550 mm - Filter cleaning, Automatic Tact² Filter Cleaning System - Flat pleated filter, cellulose fibre material - Crevice nozzle - Electrically conductive elbow - Universal floor nozzle width: 360 mm - Bumper bar - Push handle - Swivel castor with brake - Safety class: I - Electrically conductive suction hose, 4 m The vacuum cleaner is equipped with an antistatic system with grounding of suction nozzles, tubes, hose, and elbow to discharge electrostatic charges that may occur when vacuuming very fine dust. It can operate with suction hoses of 40 mm and 60 mm diameter. It is ideal for the automotive and construction industries as well as general industrial applications. Two turbines ensure high suction power. Each is equipped with the TACT system, allowing the vacuum to remove up to 1000 kg of fine dust (class A) using a single filter. The flat pleated Eco filter is suitable for collecting very fine class M dust as well as liquids. Its design offers a large filtration surface while maintaining compact overall dimensions. The TACT2 automatic filter cleaning system alternately shakes half of the filter every 7 seconds, effectively preventing reductions in suction power during operation. Included is a drain hose, which facilitates emptying water directly into a floor drain. The vacuum cleaner has a 65-litre plastic container.

Condition: new, Year of construction: 2025, Pipe Bending Machine Zopf Model KB 100: Capacity: - Maximum pipe diameter: 100x5 mm (St. 37) - Square profiles: 80x80x3 mm - Solid material: 45 mm - Maximum tool diameter: 900 mm - Bending angle up to 210 degrees - Bending speed: 0 - 2.2 RPM - Motor: 11 kW, 400 Volt, 50 Hz, 3-phase - Weight: 1850 kg Itodpfox I Afxjx Ah Ejl - Dimensions: 140x80x160 cm Features: - Digital display - Programmable bending angle - With foot pedal - Equipped with inverter - Powerful motor and reduction gearbox for high torque - Control unit for setting the bending angle - Counter for positioning the counter bearing - Mobile control panel - Quick tool change - All shafts hardened and ground - Manual material clamping - Worktable made of CK 45 steel

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3460x1000x2400 mm Number of filters 73 St. Itodpfx Ahsw Nblro Ejl Number of dust containers 4 St. Weight 410 kg 355 mm 520 mm

Condition: used, Dinnissen pneumatic conveying system Entirely constructed in stainless steel Equipped with DCE filter (6 sintamatic cartridges) Fitted with Dinnissen bottom valve Suction tube 100mm Itodsyvv Ivepfx Ah Ejl Various cleaning hatches Outlet 300mm x 300mm (optionally convertible to round 300mm) Year of construction: 2002

Condition: used, machine/vehicle number: 007668, Max. panel width: 1200 mm Itjdpeu Huwcsfx Ah Eel Max. panel length: 2400 mm Movement system: suction cups.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1170x560x570 mm Weight 55 kg Itodovz Elcepfx Ah Ejl Total power requirement 2,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 920x2100x2150 mm Weight 300 kg Itsdpfx Ahjvz Erpe Eol Total power requirement 5,5 kw

Condition: like new (used), Year of construction: 2021, cutting width (max.): 2,500 mm, cutting length (max.): 9,000 mm, Equipment: documentation/manual, PLASMA TUBE AND SHEET METAL COMBINATION WORKING RANGE SHEET METAL MM 2500 X 9000 TUBE DIAMETER FROM MM 80 TO MM 550, TUBE LENGTH MM 9000 YEAR OF CONSTRUCTION 2021 Iedpfx Ajv E Sabsh Eotl HYPERTHERM BRAND PLASMA GENERATOR MODEL XPR 170

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4100x1200x4920 mm Filter capacity 53,08 m² Number of filters 96 St. Isdjwugpzspfx Ah Eotl 400 mm Weight 1230 kg

Condition: good (used), Year of construction: 1999, MAKA HC 57 robot, for 5-axis machining Year of manufacture: 1999 Machine in gantry design with rack and pinion drive. Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1 MB memory and 3.5" floppy disk drive. Mobile control panel. Machine table approx. 6,000 x approx. 1,270 mm. Working areas / machinable cube size with tool D 160 / length 160 mm: Y-axis: approx. 6,000 mm in 3-axis operation, approx. 5,700 mm in 5-axis operation X-axis: approx. 1,050 mm in 5-axis operation Z-axis: approx. 190 mm / travel approx. 420 mm A-axis: 540° B-axis: 360° (swivel axis +/- 180°) Rapid traverse speed X/Y-axis: 45 m/min. Z-axis: 10 m/min. 1 universal head for 5-axis milling, with 50° angled head, power max. 12.5 kW, speed continuously variable, adjustable up to 17,000 rpm. Milling spindle liquid-cooled. Chip extraction system with slat curtain and suction nozzle for room air extraction for 5-axis operation and swiveling extraction for 3-axis operation. Tool interface ISO 40 for automatic tool changer system. 1 chain tool magazine with 24 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: 10 support tubes on linear guides with pneumatic release device for quick positioning. 2 control circuits for stops "Raise / Lower" 2 control circuits for e.g. sliding strip "Raise / Lower" 2 control circuits for pneumatics "Clamp / Release" 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. 1 chip conveyor integrated in the table, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: 1 vacuum pump, including tank with 250 liter capacity for rapid vacuum build-up. Other: 10 vacuum supports with various suction cups. 4 clamping devices for posts / curved parts, with pneumatic clamping. 4 pneumatic stops Automatic central lubrication. Iodpszwk Taofx Ah Estl Control cabinet with air conditioning unit. Work safety: Moving protective cabin with safety bumpers on the operator side. Any necessary safety measures for the rear of the machine must be provided by the customer. The machine can be inspected in working order in the southern Germany region, near the A81 highway / Black Forest.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 7.5 ft, color: green, overall weight: 15,000 kg, maximum load weight: 13,668 kg, empty load weight: 1,332 kg, loading space volume: 5.2 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible by arrangement. Leasing/hire purchase possible. 1 unit in stock, RAL 7043 Technical description: * Internal dimensions: 4500 x 2300 x 500 mm * Usable volume: 5.2 cbm * Tare weight: 1332 kg * Floor: 5 mm S 235 * Side walls: 3 mm S 235 * End wall angled upwards * All sheets and profiles continuously welded * Double-leaf door with safety lock * Container tested and approved according to DGUV Rule 114-010 * Floor-side wall connection: 90° * Hook diameter: 50 mm, S 355 * Hook height: 1570 mm * Top frame: round tube, Ø 89 mm * Mesh hooks * All moving parts are greaseable Itodpfx Ajz Artxeh Eol * Steel drain rollers: 159 x 6.3, length 300 mm * Inside and outside: zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) * Permissible total weight: 15,000 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter over bed slide: 480 mm, controller model: Siemens 840D, TECHNICAL DETAILS Itodpfx Ahezwmzte Ejl Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm C-axis: yes C-axis speed range: 0–20 rpm Number of tools: 12 Driven tools: 6 Spindle bore: 103 mm Main spindle head size: 8 MACHINE DETAILS Control system: Siemens 840D Main drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50 % Speed range: 30–3,000 rpm EQUIPMENT Forkardt 3 NHF 315-82 A8 power chuck with centrifugal force compensation and hard, ground-in top jaws Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Maximum bar diameter: 63 mm Including draw tube and mounting for power chuck

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) Itsdpjzukp Aofx Ah Eel -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: used, machine/vehicle number: 1980 100 175, Maximum volumetric flow rate: 220 m³/h Itodpfxsb Nv S Ss Ah Eel Maximum pressure: 22000 Pa Electrical connection: 230 V Weight: 16.5 kg Space requirement: 720 x 320 x 410 mm

Condition: used, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 0872101270802, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser hours: 6,000 h, laser power: 3 W, pipe diameter (max.): 152 mm, pipe length (max.): 6,500 mm, workpiece weight (max.): 23 kg, type of cooling: water, overall weight: 23,900 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Model: ADIGE / BLM GROUP LT7 Machine Type: Automatic 3D fiber laser tube/profile cutting machine Laser Source: Fiber laser Laser Power: 3kW Cutting Diameter: Ø12 – Ø152.4 mm 3D Cutting Head: BLM GROUP 3D Tube Cutter Max. Profile/Bar Weight: 23 kg/m Minimum Loadable Length: 1900 mm Max. Loadable Length: 6500 mm Automatic Loading: Yes Bundle Loading: Yes Single Profile/Bar Loading: Yes Max. Bundle Loading Capacity: 5,000 kg Automatic Unloading: Yes Unloading Position: 3 programmable positions Unloading Length: 6500 mm Processable Materials: Carbon steel, stainless steel, aluminum, copper, brass Standard Configuration: 6500 mm loading + 6500 mm unloading Machine Weight: Approximately 23,900 kg (including fume extraction system) Itjdjzzzb Aspfx Ah Esl Average Power Consumption – O₂: 15 kW Average Power Consumption – N₂: 20 kW

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters – Type STN 30L/1 – 12/27 First registration 02/2024, from first owner V2A stainless steel tank Diameter 2,200 mm 3 baffle plates 1 filling dome DN500 with hinged cover 4-inch flushing line throughout the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min., interchangeable housing shells Isdpfxoz Am Evj Ah Eetl Complete piping in V2A stainless steel Rotatable outlet at the rear, 6 inches, with drain device 8-inch suction port at the rear top 6x LED work lights Large hose trays on the left and right BPW axles with disc brakes WABCO trailer EBS with RSS stability program WABCO Optiturn – OptiTurn automatically detects when a vehicle enters a curve and then loads or unloads, or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle becomes smaller and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. 1st axle is a lift axle Tires: 6 x 385/65 R 22.5 RENTING is the new BUYING, with us also available in full-service leasing – IMMEDIATELY AVAILABLE.

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. Iedsz Ai Tpopfx Ah Eotl - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7385, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Transfluid, controller model: IPU 20, pipe diameter (max.): 648 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 180 °, bending radius (max.): 125 mm, bending radius (min.): 50 mm, working width: 6,000 mm, mandrel length: 5,500 mm, number of axes: 3, working height: 1,300 mm, table length: 7,000 mm, table width: 900 mm, table height: 1,300 mm, overall weight: 1,000 kg, total length: 7,000 mm, total width: 900 mm, total height: 1,300 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 1,320 l, operating pressure: 200 bar, Equipment: documentation/manual, emergency stop, Bending software requires a new update. Bending mandrels are available, bending tools are not included. Iodpfx Aexcxupeh Estl

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Itsdpfx Ahofnlkwj Esl Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.