Used Stirring Device for sale (11,585)

Condition: used, This listing is for 1 of 5 Stuart SB301 Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The Stuart SB301 Magnetic Stirrer is a heavy-duty device designed for mixing solids in liquids. It features a stainless steel plate with a dimensions of 300mm x 300mm, making it suitable for use with vessels up to 30 liters in capacity. Key Specifications Speed range: 100 to 600 rpm Maximum stirring capacity: 30 liters Plate material: Stainless steel Isdpfoxx Ar Dsx Am Hetl Overall dimensions: 328mm x 369mm x 103mm Net weight: 5 kg Electricity supply: 230V, 50Hz, 50W

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI History from the previous owner is available Isdpfx Aozhwvpsm Hjtl We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: ready for operation (used), Year of construction: 2013, Hommel Etamic Opticline C514 Waveform Measuring Instrument / Waveform Measuring Machine Year of manufacture: 2013 Measuring range, diameter: 0.2 - 140 mm Measuring range, length: 500 mm Workpiece diameter: 150 mm Workpiece length: 530 mm Iodpfx Amezz H Rie Hjtl Workpiece weight: approx. 15 kg Resolution, diameter: 0.1 µm Resolution, length: 0.1 µm Resolution, rotation: 0.018° Accuracy, diameter: (2 + D/100) µm Accuracy, length: (5 + L/100) µm Repeatability, diameter: 0.5 µm Repeatability, length: 3 µm Measuring speed: 10–80 mm/s Measuring rotation: 1 rev/s Positioning speed: 200 mm/s Typical measuring time: 3–30 s Dimensions of measuring system: 780 × 875 × 1,420 mm Weight: 1,850 N ≈ 185 kg You are welcome to visit us for an inspection. We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, This listing is for a IKA Eurostar PWR CV Overhead Stirrer. The unit is in full working condition and is ready for immediate release. The IKA Eurostar PWR CV Overhead Stirrer is an efficient laboratory device specifically designed for various stirring tasks, excelling in mixing both high and low viscosity substances. This stirrer is part of the comprehensive IKA Eurostar series, which offers diverse models tailored to different laboratory needs. Key Features: Itedpjxxz S Asfx Am Hel Speed Range: Features a versatile speed range of rpm, with automatic adjustments made possible through advanced microprocessor-controlled technology. Safety Circuits: Equipped with built-in safety circuits that provide automatic cut-off in cases of anti-stall or overload conditions, ensuring user safety and equipment protection. Constant Speed: Maintains a steady speed regardless of viscosity changes in the sample, as it continuously compares the actual shaft speed with the set speed for optimal performance. Stirring Quantity: The EuroStar 20 model can handle a maximum stirring quantity of 15 litres (H2O), making it suitable for larger volumes. Torque: Delivers a maximum torque of 20 Ncm at the stirring shaft, providing sufficient power for effective mixing. Stirring Element Fastening: The stirring element is securely fastened using a chuck, ensuring stability during operation. Applications: Laboratory Use: Designed specifically for laboratory environments, making it ideal for routine stirring tasks. Mixing Substances: Capable of efficiently mixing a wide range of substances, whether they are of high or low viscosity, catering to diverse experimental needs. Intensive Mixing: Suitable for applications that demand intensive mixing, such as preparing emulsions or suspensions.

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! Itodpezx S Egjfx Am Hol EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: used, This listing is for a IKA RCT B S002 Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The IKA RCT Basic Magnetic Stirrer is a highly versatile and reliable laboratory device, combining precision stirring with integrated heating capabilities. Designed for various lab applications, it ensures consistent performance, safety, and ease of use. Key Features: Wide Speed and Temperature Range: Powered by a strong motor, it supports a high range of stirring speeds and operates with adjustable heating plate temperatures between 50°C and 310°C. Digital Display for Accuracy: Allows exact setting of temperature and speed, even when the unit is turned off, with a safety temperature limit displayed digitally. Hot Surface Warning: The Hot Top indicator alerts users when the heating plate remains hot, reducing the risk of burns. Automatic Safety Features: Switches off automatically if the connected external temperature sensor is not properly immersed, with timeout duration adjustable. Bushing for Contact Thermometer: Compatible with contact thermometers like ETS-D5, ensuring precise external temperature control for sensitive applications. Itjdpfexxz Uksx Am Hsl Aluminum Heating Plate: Optimized for superior heat transfer and fast heating of samples. Enhanced Durability and Design: The enclosed assembly (IP 42) protects the unit against splashes and contaminants, extending its service life. Improved Magnetic Adhesion: Ensures stable stirring, even at higher speeds. Error Code Display: Provides digital error codes for straightforward troubleshooting.

Condition: used, Year of construction: 2011, Gorreri DVG 500 dispensing unit Year of manufacture: 2011 Condition: functional Iedpfxsz A Sa As Am Hetl Suitable for filling, dispensing, or decorating various types of products made from doughs, creams, jams, and other liquid products. Performance: max. 40 cycles per minute Compressed air: 250 l/min (6 bar) Dimensions L x W x H: 1200 x 600 x 1850 mm Weight: 80 kg

Condition: used, Year of construction: 2018, Turning machine for door panels Manufacturer: Kraft Isdpfxez A S H Ao Am Hetl Year of manufacture: 2018 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Itedpfjz Ay Rrex Am Hjl Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: ready for operation (used), Year of construction: 2007, Stiefelmayer Brivisor KL-4 Hardness Testing Machine Testing height: 150 mm (with testing table) Outreach: 200 mm Iedpfxezzynho Am Hotl Device footprint: 560 mm x 250 mm x 770 mm (W x D x H) Load range: 0.05 - 10 kgf Weight: approx. 45 kg Year of manufacture: 2007 Vickers: HV 0.1 | 0.3 | 0.5 | 1 | 2 | 3 | 5 | 10 Brinell: HBW 1/5 and HBW 1/10 You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. Itedpfx Amszdtfle Hel In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Itedjzy Ndcopfx Am Hjl Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: good (used), For sale is a universal length measuring device with numerous accessories from the brand Helios, in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Helios Messtechnik • Type: 27 773 001 • Control model: Unitron 2 CHA • Universal length measuring device / adjustment device / shaft measuring device • With numerous accessories for various measurements • Mounted on a workshop trolley with contents (See pictures) • Condition: Used, functional (The cable or connector of the control unit would need to be replaced, presumably not original; the display turns off after a few seconds) Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT shown. Ijdpfxezxiv Ne Am Hstl Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Subject to errors in technical data and prior sale.

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Length: 1750 mm Iedpfxjzrh D So Am Hotl Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Option to start the machine on-site.

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m The blowing device Automatic logging For cable diameter 1.5 - 9 mm Itodpjzphdtjfx Am Hel For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Condition: used, Year of construction: 2008, Universal filling machine, Fritsch, model UFG-EPA-08RHG-NL20 Year of manufacture: 2008 Itjdpfx Amoz A Saie Hjl

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 1 kW (1.36 HP), Simar FX 2004 Material Handling Device Motor power: approx. 0.9 – 1.1 kW (brush motor) Power supply: 230 V / 50 Hz Container volume: approx. 3 – 4 liters Conveying capacity: approx. 60 – 100 kg/h Hose connection diameter: 38 mm (standard) Filtration: Polyester filter with automatic cleaning Iodpfx Asy Hldnsm Hetl Simar FDX-2 Dye Dosing Unit Drive type: Stepper motor (high rotational speed repeatability) Power supply: 230 V / 50 Hz Speed: Continuously adjustable (depending on the control unit, typically 0.1 – 200 rpm) Dye container capacity: approx. 5 liters

Condition: ready for operation (used), Hommel Opticline Contour 414 Wave Measuring Instrument, Measuring Device, Wave Measuring Machine Max. measuring diameter: 140 mm Max. measuring length: 300 mm Resolution: 0.1 µm Measuring accuracy (diameter): (1.0 + D/200) µm Measuring accuracy (length): (2.6 + L/200) µm Repeatability (diameter): 0.3 µm Measuring speed: automatic, 10–80 mm/s Positioning speed: up to 200 mm/s Rotational speed: 1 rotation/s Description has been copied. You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are reserved. Itodpfx Amezz Huuo Hjl

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 113201690006, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, This device is a component of an entire production line, which has not been in use since 2022. The entire line consists of 6 such devices, which are grouped in pairs. Each pair of devices has its own control cabinet/switchboard. The entire system is controlled from a main switchboard. The entire system, or individual components, will be sold. Iodpfszt Nprjx Am Hstl

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, For sale: a Schmalz vacuum lifter, Jumbo model, with a Joulin suction cup. It can be used with wet or frozen wood. Iodszxp I Eopfx Am Hjtl

Year of construction: 2012, condition: good (used), Unit comes complete with suction lift Maximum load capacity: 150 kg Width: 650 mm Height: 2000 mm Depth: 1100 mm Weight: approx. 25 kg Iedpfxezmyrdo Am Hetl Condition: good, second-hand

Year of construction: 2022, condition: good (used), functionality: fully functional, Diagnostic device for motor vehicles with OBD2, Adis EuroDFT Terra Mobile Industry 1432 with EuroVCI Type C, from 2022, with Windows 11 Pro. Itsdpfx Amjzmgivo Hol

Year of construction: 2011, condition: excellent (used), The lifting and tilting device includes the undercarriage of the traveling carriage, the control cabinet, the vibrator, and the lifting and tilting device itself. Ijdpfx Aozwdn Rem Hjtl The centrifuge is not included in the scope of delivery. Performance specifications, including the centrifuge: Current: 59 A, Power: 28 kW, 50 Hz.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Offered for sale is a Komet ISG3100 shrink fitting machine for the precise and rapid shrinking of tools in shrink chucks. The device is ideally suited for use in CNC machining, toolmaking, mold making, and modern cutting processes. Thanks to the induction technology, tools can be quickly and reliably shrunk in and out. The compact design and ease of operation make the device an efficient solution for daily tool preparation. Features: Manufacturer: Komet Type: ISG3100 Induction shrink fitting technology Fast heating of shrink chucks Itsdszu Ikkepfx Am Hjl Simple and safe operation Suitable for various tool holders Compact and robust industrial design Ideal for CNC machining and tool management Advantages: High concentricity accuracy of the tool holders Fast tool changes Reliable tool clamping Reduction of setup times Long service life of the tool holders Suitable for series production and single-part production with various holders from HSK30 to HSK100 Used, fully functional. Shows signs of wear consistent with its age.

Condition: used, MIG/MAG pulsed gas shielded welding machine, EWM, type Phoenix 301 Progress Puls Force Arc Serial No. Art. No.: Year of manufacture: 2007 Power: 300 amps = 60% duty cycle 250 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 29 volts Mains connection: 400 volts, 50 Hz, 16 amps plug - Digital display for voltage and current - Pulse function - Various welding programs selectable - 2-cycle, 4-cycle and spot welding - Water-cooled - 4-meter hose package, NEW, with central connection - Welding gas pressure regulator, NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration Iodpfxsz Afhij Am Hotl