Used Stepper Motor Driver for sale (31,774)

Condition: used, Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -stepper motor control -Manufacturer: Phytron -Control comes from a marking laser SLS Spectron Laser Systems Bsdpfxsda Nyze Aafolc -Type: Handling Gretag Laser 6211 -Screen keyboard -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/410/H132 mm -Weight: 17 kg

Condition: used, Screen keyboard, control cards for lamp-pumped lasers, marking lasers, control card, input card, control -stepper motor control -Manufacturer: Phytron Blodpsda Ny Dofx Aafoc -Type: IXE-CT-Slave -Control comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/410/H132 mm -Weight: 16 kg

Condition: ready for operation (used), Panasonic DV47M02AVXAA P356-02AVXAA Motor Driver, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Blodpfx Aaoi Eccfefsc

Condition: ready for operation (used), Agie MJG 2119 A Zch 615072.6 + Step motor driver REX MJG 2113 A 629753.5, used, normal signs of wear, 100% functional Bsdpfx Aaei D Twwofslc

Condition: ready for operation (used), AGIE 622064.4 Step Motor Driver Isotorque MJG2129E , serial no. according to photo ,used, small traces of use, 100% functional, scope of delivery according to photos Blodpsi D Tvgofx Aafec

Condition: ready for operation (used), Panasonic Panadac 337N-01 Pulse Motor Driver, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Bledpfxsi Eccmj Aafoc

Condition: ready for operation (used), Agie MJG 2129 D Step motor driver . 622064.4, used, minor signs of wear, 100% functional, scope of delivery as per photos Bsdpfxsi D Twzs Aafslc

Condition: ready for operation (used), Panasonic DV47N100MDG / P326L-100MDG Motor Driver, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Bedpfxei Eccis Aafslc

Condition: ready for operation (used), Panasonic Panadac 337N-02 Pulse Motor Driver, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Bledpfx Aasi Eccqofsc

Condition: good (used), Good working condition. Please check out our other listings as well. Bjdpfxon Uwice Aafolc

Condition: used, Linear guide, portal axis SCHNEIDER ELECTRIC / FESTO Electric slide Motor type: ILS1B571PC1A0 Year of manufacture: 2010 Axis travel: 300 mm Power supply: 36 Volt (DC) Carriage: 86 x 54 mm - Synchronous servo motor / stepper motor SCHNEIDER ELECTRIC, type: ILS1B571PC1A0 - Linear guide FESTO, type EGSK-33-300-6P - Ball screw Ø 10 mm, pitch 6 mm - 2 adjustable position sensors Dimensions L x W x H: 580 x 120 x 57 mm Bsdsw Uc Tzepfx Aafjlc Weight: 6.5 kg in good condition

Condition: used, Cross table with mounted rotary table and stepper motor drive Rotary table, dividing attachment Precision positioning systems UHL Cross table UHL type KT5-NSOC Serial no.: 0008002 Bjdow E Nw Aspfx Aafjlc Table size: 145 x 145 mm Construction height: 62 mm Travel: 50 mm per axis Straightness/flatness: 5 μm - Drive per axis by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (cross table) L x W x H: 200 x 200 x 62 mm Very good condition Rotary table UHL type B80 DT as dividing head Serial no.: 00080002 Rotary table: Ø 74 mm Construction height: 40 mm - Drive by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (rotary table) L x W x H: 92 x 80 x 40 mm Dimensions with mounted rotary table L x W x H: 200 x 200 x 102 mm Weight: approx. 3 kg Very good condition

Condition: ready for operation (used), functionality: fully functional, CNC dividing head with stepper motor control, - Divisions from 1-999 possible - Odd divisions also possible - Ideal for face grinding, divisions – saws with high tooth pitch, or even slow cylindrical grinding of circular knives - Can be retrofitted to any tool grinding machine - Rotatable, pivotable in all directions, horizontally and vertically - Easy installation on the machine table using T-nuts - Can also be supplied with a small mounting angle - Center height 190 mm or 140 mm measured from the machine table. - CNC dividing head available with MT5 chuck or SK 40 chuck - Division is triggered via foot switch or optionally a simple contact/switch, etc. on the machine table can be triggered Bjdpfx Aaowmd Irjfslc - The division process can be fully automated with the hydraulic machine table or linked via the CNC machine control system. New price: €12,800

Condition: ready for operation (used), Soprel Rotodrive R083B30/04 servodrive motor, serial number as per photo, mounting hole spacing: 53 x 53 mm, drive shaft diameter: 11 mm, used, heavy signs of wear, 100% functional, scope of delivery as shown in the photos. Bedpex Dwb Defx Aafslc

Condition: new, power capacity / kW volt / V ampere / A total power requirement 12,6 kW MOLL engine Type: Y2PE-160MA2B3 / ML1907010375 Bsdsig A Ekjpfx Aafelc V: 400/690 A: 19.6 / 11.3 / 19.5 Speed: 2950 / 3540 Total power: 11kW / 12.6kW Condition: New

Condition: new, power capacity / kW volt / V ampere / A total power requirement 42,5 kW MOLL-Motor Typ: Y2PE-200LB2B3 / ML2001011999 Blodpfx Ajif Sc Doafoc V: 400/690 A: 64,0 / 37,1 / 64,4 Rpm: 2970 / 3564

Condition: new, power capacity / kW volt / V ampere / A total power requirement 21,3 kW MOLL engine Type: Y2HE-180M4 PTC / MOLL130920373 Bljdpfx Aajuddlhjfsc V: 400/690 RPM: 1470 / 1764 Total power: 18.5kW / 21.3kW Condition: New

Condition: new, Year of construction: 2025, operating hours: 5 h, functionality: fully functional, fuel type: diesel, gearing type: automatic, number of seats: 1, operation weight: 2,000 kg, chain condition: 100 %, drive condition: 100 %, shovel volume: 0.025 m³, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The HT20 PRO is a compact and powerful mini excavator in the 2.0-ton class, designed for professional applications in construction, landscaping, and municipal sectors. The machine stands out due to its robust build, precise hydraulics, and high operational reliability. The proven Kubota D902 3-cylinder diesel engine with 11.8 kW ensures smooth operation, low fuel consumption, and long service life. Thanks to its compact dimensions and adjustable undercarriage, the HT20 PRO is ideal for work on confined job sites. Technical Specifications: Engine: Kubota D902 3-cylinder diesel engine Engine power: 11.8 kW Low fuel consumption Very low vibration operation Hydraulics: Two-stage cast hydraulic pump Load-sensing hydraulic valve Drive motor with high/low speed Hydraulic hoses with steel wire reinforcement Work Equipment: Side-swing boom (left / right) Maximum digging depth: 1,995 mm Maximum digging reach: 3,130 mm Maximum digging height: 2,875 mm Maximum dumping height: 1,930 mm Undercarriage: Adjustable undercarriage Reinforced undercarriage made of manganese steel Heavy-duty cast iron counterweights Rubber tracks with three layers of steel cord Track width: 200 mm Dimensions: Transport length: 2,650 mm Overall width: 970 – 1,270 mm (adjustable) Upper carriage width: 1,055 mm Overall height with ROPS canopy: 2,350 mm Track gauge: 770 – 1,070 mm Tail swing radius: 980 mm Minimum swing radius: 1,670 mm Gradeability: 30° Features: Fully enclosed cab Heating and air conditioning Excellent all-round visibility Ergonomic controls Joystick control LED work lights Comfort seat Reinforced steel construction Bljdpfex Hvvhsx Aafsc Attachments / Implements (set includes): 20 cm trenching bucket with removable teeth 50 cm trenching bucket 100 cm grading bucket Hydraulic quick coupler incl. solenoid valves and hydraulic lines Optional: Hydraulic auger set up to Ø 300 mm (bits 150 / 200 / 300 mm + extensions) – SET PRICE 700€ RRP Maintenance & Warranty: Service intervals: every 250 operating hours or annually Warranty: 12 months across Europe Service & spare parts from stock in Rheda-Wiedenbrück (DE) Delivery & Availability: The excavator is available immediately and ready for operation. Europe-wide delivery can be arranged on request. This equipment complies with the highest safety standards and is CE certified. 2006/42/EC (Machinery Directive) 2014/30/EU (EMC Directive) 2011/65/EU (RoHS Directive) Interested? Contact us today! SET PRICE NET: €16,600 RRP Location: Rheda-Wiedenbrück

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 2 l/h, fuel tank capacity: 20 l, color: orange, overall weight: 2,320 kg, operation weight: 2,200 kg, lifting height: 4,190 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.068 m³, suspension: other, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-25P is a compact, high-performance 2.5-ton mini excavator designed for professional use in construction, landscaping, as well as municipal and agricultural applications. Its robust build and advanced load-sensing hydraulics ensure efficient and precise operation even under demanding conditions. Thanks to the boom swing function, this machine is ideal for confined worksites and standard earthmoving or foundation tasks. Key Technical Features: - Boom swing for precise operation in tight spaces - Stable undercarriage (1,300 / 1,500 mm) providing excellent stability - Powerful Yanmar diesel engine - Load-sensing hydraulic valves for sensitive control - High-capacity axial piston pump - Hydraulic piston drive and swing motors - High digging and breakout forces - Durable rubber tracks Weights & Dimensions: - Operating weight: 2,200 kg - Operating weight with cabin: 2,320 kg - Bucket capacity: 0.068 m³ - Wheelbase: 1,500 mm - Track length: 1,940 mm - Ground clearance upper carriage: 220 mm - Counterweight swing radius: 670 mm - Undercarriage width: 1,300 / 1,500 mm - Track width: 230 mm - Track height: 50 mm - Transport length: 4,100 mm - Overall height: 2,440 mm Engine: - Model: Yanmar 3TNV80F - Displacement: 1.267 l - Engine power: 14.6 kW at 2,400 rpm (16.1 HP at 2,300 rpm) - Max. torque: 67.4 Nm at approx. 1,800 rpm - Engine oil capacity: 3.4 l - Fuel tank: 20 l Drive & Performance Data: - Travel speed: 2.0 – 3.8 km/h - Swing speed: 9.5 rpm - Max. gradeability: 30° - Max. drawbar pull: 23 kN - Ground pressure: 26.5 kPa Working Range: - Max. digging reach at ground level: 4,520 mm - Max. digging reach: 4,400 mm - Max. digging depth: 2,410 mm - Max. vertical digging depth: 1,930 mm - Max. dumping height: 4,190 mm - Max. dumping height: 2,880 mm - Min. turning radius: 2,130 mm - Bucket breakout force: 20 kN - Arm breakout force: 13.5 kN Dozer Blade: - Max. lift height: 260 mm - Max. lowering depth: 300 mm Undercarriage: - Track material: Rubber - Track model: 230 × 48 × 82 - Track tensioning system: Grease cylinder Hydraulic System: - Pump type: Axial piston pump - Flow rate: 67.2 l/min - Working pressure: 24.5 MPa - Hydraulic valves: Load sensing - Swing motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors Equipment: - Boom swing - Fully enclosed cab with heating - Dozer blade - Joystick control - LED work lighting - Comfort seat - Rubber tracks - Hydraulic safety valves - Reinforced steel frame Accessories & Attachments – SET includes: - 25 cm trench bucket - 50 cm digging bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – SET PRICE €650 RRP Maintenance & Warranty: - Service every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts available ex stock Rheda-Wiedenbrück (DE) Delivery & Availability: - Excavators available immediately - Europe-wide delivery can be arranged on request Bsdpfx Asx Hg Etjafjlc This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €22,000 RRP Location: Rheda-Wiedenbrück

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-20PRO is a modern, powerful, and versatile 2-ton mini excavator designed for continuous professional use in construction, civil engineering, and landscaping. Thanks to its robust steel construction, state-of-the-art load-sensing hydraulics, and compact dimensions, this machine is ideally suited for work in confined job sites as well as demanding earthmoving and foundation operations. The fully enclosed cab with integrated heating makes the LT-20PRO a true all-season machine, offering excellent operator comfort, safety, and productivity, even in cold, rainy, or windy conditions. Key Technical Features: - Swing boom for precise operation in tight spaces - Telescoping undercarriage 990–1,300 mm for maximum stability - Integrated travel motors with high/low speed - Load-sensing hydraulic valves – energy efficient & highly responsive - Axial piston pump with variable displacement - Slew drive with plunger-type rotation motor - Dual cast counterweights for superior stability - Wear-resistant rubber tracks 230×48×70 Weights & Dimensions: - Operating weight: 1,800 kg - Bucket capacity: 0.04 m³ - Wheelbase: 1,230 mm - Track length: 1,595 mm - Ground clearance (superstructure): 460 mm - Counterweight swing radius: 735 mm - Undercarriage width: 990 / 1,300 mm (telescopic) - Track width: 230 mm - Track height: 380 mm - Transport length: 3,600 mm - Overall height: 2,450 mm - Bucket width: 485 mm Engine: - Kubota D902-E4B-CBH-1 Bodpfox Hg D Asx Aafelc - Displacement: 0.898 l - Engine output: 11.8 kW at 2,300 rpm (16.1 hp) - Max. torque: 51.3 Nm at 1,800 rpm - Engine oil capacity: 3.7 l - Fuel tank: 19 l Travel & Performance Data: - Travel speed: 2.2 / 4.5 km/h - Slew speed: 9.5 rpm - Maximum gradeability: 30° - Maximum drawbar pull: 18 kN - Ground pressure: 29 kPa Working Range: - Max. digging reach at ground level: 3,840 mm - Max. digging reach: 3,910 mm - Max. digging depth: 2,270 mm - Max. digging height: 3,570 mm - Max. dumping height: 2,480 mm Dozer Blade: - Max. lift height: 280 mm - Max. lower depth: 190 mm Hydraulic System: - Pump type: Axial piston pump - Flow rate: 64 l/min - Operating pressure: 23 MPa - Hydraulic valves: Load sensing - Slew motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors - Hydraulic oil tank: 17.5 l Equipment: - Fully enclosed cabin incl. heating - Joystick control - LED work lights - Comfort seat - Rubber tracks 230×48×70 - Dozer blade - Hydraulic safety valves - Reinforced steel construction - Dual cast counterweights Standard Attachments & Accessories – SET includes: - 25 cm trenching bucket - 50 cm trenching bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – SET PRICE €650 Maintenance & Warranty: - Service intervals: every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts ex-stock Rheda-Wiedenbrück (DE) Delivery & Availability: The excavators are available immediately. Europe-wide delivery can be arranged on request. This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €20,500 RRP Location: Rheda-Wiedenbrück

Condition: used, Year of construction: 1999, Electric motor, year approx. 1999 Bjdpfx Asxu Ewnsafjlc

Condition: used, Electric motors Bljdpfxoxfvzro Aafec

Condition: new, functionality: fully functional, power: 14 kW (19.03 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 2,500 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.07 m³, Year of construction: 2025, operating hours: 5 h, Equipment: air conditioning, cabin, hydraulics, parking heater, quick-change device, steel tracks, The HT25PRO is a powerful, premium-class mini excavator in the 2.5 t category, specifically designed for professional and demanding applications. As a larger and more robust version of the HT20, it offers increased performance, reach, stability, and productivity. Equipped with an original Kubota diesel engine, load-sensing hydraulics, and a reinforced manganese steel frame, the HT25PRO is ideal for civil engineering, landscaping, municipal use, and agricultural operations. Technical Specifications: Engine: Kubota D1105 3-cylinder diesel engine Power: 14 kW rated (continuous operation), up to 18.4 kW peak output (no switchable power stages) Very low vibrations Fuel efficient Designed for continuous operation Hydraulics: Load-sensing hydraulic pump Load-sensing multi-way hydraulic valve Hydraulic pump pressure: 25 MPa System pressure: 22 MPa Hydraulic flow rate: 61.6 l/min Travel motor with high/low speed (Japan Standard) High-quality, heavy-duty hydraulic lines Dimensions & Weight: Length × width × height: 345 × 143 × 250 cm Chassis width: 140 cm Operating weight: 2,500 kg Working Range: Boom swing left/right Swing function Maximum digging depth: 2,370 mm Digging/dumping height: 3,500 mm Undercarriage & Superstructure: Manganese steel undercarriage with high torsional rigidity Extendable / telescopic undercarriage Laser-cut, high-precision steel components Heavy-duty cast iron counterweight Features: Steel tracks (very robust, professional use) Fully enclosed cabin Heating and air conditioning Excellent all-round visibility Ergonomic controls Joystick operation LED work lights Comfort seat Reinforced steel structure Accessories / Attachments (included as a set): 25 cm trenching bucket with removable teeth 50 cm trenching bucket 100 cm grading bucket Blodpsx Hhu Nsfx Aafec Hydraulic quick coupler including solenoid valves and oil lines Optional: Hydraulic auger set up to Ø 300 mm (Auger sizes 150 / 200 / 300 mm + extensions) – SET PRICE €850 RRP Maintenance & Warranty: Service intervals: every 250 operating hours or annually Warranty: 12 months Europe-wide Service & spare parts available from stock in Rheda-Wiedenbrück (DE) Delivery & Availability: The excavator is available immediately and ready for use Europe-wide delivery can be arranged on request This machine meets the highest safety standards and is CE-certified: 2006/42/EC (Machinery Directive) 2014/30/EU (EMC Directive) 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €23,500 RRP Location: Rheda-Wiedenbrück

Condition: used, Electric motor, reversing motor, induction motor, reversible motor -Manufacturer: Sesame Motor Corp., Electric Motor Reversible Motor -Type: unfortunately without type designation -Speed: approx. 1480 rpm -Shaft: Ø 11 x 20 mm -Quantity: 3x motor available -Price per piece -Dimension: 150/90/H90 mm -Weight: 3.0 kg/pc. Blsdpfep Udipox Aafec

Condition: used, servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller, servo module, stepper motor driver -Manufacturer: Oriental Motor, Controller Module with stepper motor driver Bodpfx Aajuuu E Uofslc -Controller modules: type CM 10-1 -Stepper motor driver: Type ARD-K -Delivery/Price: complete -Total dimensions: 90/55/H105 mm -Weight: 0.4 kg