Used Steiger for sale (606)

Condition: used, Outer diameter of the chuck: 240 mm Bore: 75 mm Overall height: 105 mm Equipped with a short taper chuck flange according to DIN 55027, size 6. Includes stepped jaws, both internally and externally, and a chuck key. Fodpfxsdaqdme Ak Ujpl

Year of construction: 1993, condition: new, Load capacity: 10 t lowest height (top): 800 mm Lowest height (feet): 100 mm Fodsdc Sx Sepfx Ak Ujpl Stroke: 400 mm Lifting height max .: 1200 mm Weight: 42 kg

Condition: used, Year of construction: 1975, machine/vehicle number: 12138/4, nominal capacity: 20 kVA throat: 250 - 600 mm spark plug air gap: 270 mm welding capacity steel: ca. 2,5 + 2,5, max. 3,5 - 1,5 mm electrical connection: 380 V kW space needed: 470 x 1170 x 1300 mm weight: 210 kg Fodpfsb Nvimjx Ak Ujpl

Condition: excellent (used), Item: "Schäfer boxes" – visible storage boxes made of PP plastic available in 3 heights: 145, 200, and 300 mm, green Fpedpsdulmkjfx Ak Usl 471 pieces: 320 x 510 x 145 mm high, capacity 7.5 liters 43 pieces: 510 x 320 x 200 mm high, capacity 23.5 liters 242 pieces: 500 x 312 x 300 mm high, capacity 38.0 liters

Condition: ready for operation (used), machine/vehicle number: 64532, used, manually hydraulic pipe bending machine available bending segments: 3/8, 3/4, 1 1/4 and 2" Fjdpedzw Hwjfx Ak Uspl space required: 850 x 640 x 780 mm

Condition: ready for operation (used), Hydraulic unit, consisting of an oil tank with a drive motor mounted on top, with a flanged hydraulic pump, and two valve blocks located above it. 1. Valve block, manufacturer: WANDFLUH-Hydraulik Maximum pressure: 160 bar Delivery rate: 20 l/min 2. Valve block, manufacturer: BOSCH Operating pressure: 319 bar Fedpfx Aksdz Dlio Uepl Drive motor: 220/380 V, 1420 rpm, 2.2 kW Space requirement: 700 x 620 x 1050 mm Weight including hydraulic oil (approx. 90 l): 193 kg

Condition: good (used), Plate size: 1500 x 4000 mm Fededzln Ujpfx Ak Ujpl Plate height: 370 mm Top plate thickness: 50 mm Working height in assembled state: 870 mm Weight: 6.8 t

Condition: ready for operation (used), machine/vehicle number: 838 621, minimum pressure: 180 mbar at intake capacity: 2.2 m³/min outlet nozzle diameter: 50 mm speed: 2780 rpm Fpedodzw I Nspfx Ak Usl drive motor: 220/380 V, 0.95 kW space requirement: 510 x 350 x 480 mm

Condition: excellent (used), machine/vehicle number: 02 P 0587, cutting circuit: 15 - 40 A electrical connection: 230 V, 16 A kW space needed: 470 x 250 x 250 mm weight: 10 kg Fpodpodyy Diefx Ak Uel

Year of construction: 2017, condition: ready for operation (used), Belt length: 2900 mm Fjdpedzx E Uefx Ak Ujpl Belt width: 360 mm Belt speed infinitely adjustable Drive motor Table height adjustable by: +/- 500 mm Space requirement: 2000 x 600 x 650/700 mm

Year of construction: 1995, condition: ready for operation (used), machine/vehicle number: 20910, table mounting size: 1000 x 490 mm movements x/y/z: 800/510/500 mm spindle taper: ISO 40 ISA min./max. distance table/spindle: 120/620 mm Fedpfx Aodt Ttksk Ujpl spindle turning speed range: 40 - 6000 rpm number of tool positions: 22 pieces carriages: x/y 1 - 3200 / z 1 - 2000 mm/min rapid move: x/y 1 - 3,2, z 1 - 2 m/min electrical connection: 380 V, 19 kW space needed: 2850 x 2150 x 2600 mm weight: 3800 kg

Year of construction: 2006, condition: excellent (used), machine/vehicle number: 24591, Throughput: approx. 2 - 5 m³/h Fpodpsdxmd Uofx Ak Usl Filling and material discharge opening: 300 mm diameter Space requirement (assembled, with bridge): 1400 x 1200 x 2200 mm

Condition: good (used), Flow rate can be adjusted using two different speeds. Flow rate depends on the pump speed. Immersion depth: 180 mm Flange diameter: 100 mm Connection outlet: 5/4" Two speeds selectable via pole-switching motor: 1400/2800 rpm Fpodpfx Akodzp Ddj Uol Electrical connection: 380 V, approx. 0.5 kW

Condition: ready for operation (used), Height-adjustable workbench with parallel vise, manufactured by "WERKSTOCK," with various interchangeable jaws. Table can be rotated, size: 650 x 650 mm Height adjustment: 750 - 1200 mm Vise Jaw width: 130 mm Clamping range: 150 mm Fodpfx Asdyp R Hok Uspl

Year of construction: 1962, condition: good (used), machine/vehicle number: 162487, Suction capacity: 50 l/min Maximum operating pressure: 10 bar Compressor speed: 1400 rpm Tank: Operating pressure: 10 bar Fedpfx Akjdyp R Rj Uspl Capacity: 50 l

Year of construction: 1990, condition: good (used), machine/vehicle number: 603, working width: 3050 mm metal sheet thickness: 6 mm Fpodjdzrpwjpfx Ak Usl rear stop: 650 mm power: 380 V, 16 kW space needed: 3680 x 2060 x 1870 mm weight: 7580 kg

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V Fodpfsb Sciajx Ak Uopl space needed: 2750 x 1500 x 1900 mm weight: 1350 kg

Condition: used, plate size: 500 x 1000 mm plate thickness incl. ribbing: 80 mm plate thickness of upper plate: 30 mm Fpodpfx Akeb T R Dus Ujl weight: ca. 170 kg

Condition: used, Working width: 1040 mm Folding width, approx.: 12 mm For sheet metal thickness up to approx.: 1 mm Fjdpfxocaxtxe Ak Uspl Drive motor, gearbox-brake motor: 380 V, 0.55 kW Space required: 1300 x 480 x 960 mm Weight: 334 kg

Condition: used, machine/vehicle number: 20308, max. swing diameter: 600 mm distance between centers: 2200 mm max. grinding diameter with a grinding wheel of 800 mm diameter: 125 mm grinding wheel diameter when using steady rests: 20 - 125 mm Fjdpfjcik N Ssx Ak Ujpl grinding wheel dimensions: 800 x 28 - 800 x 42 x 305 mm 2 grinding wheel speeds 3 workpiece speeds: 32, 55 and 96 rpm table traverse, coarse/fine, manual: 10/2 mm automatic feed rate of the grinding wheel: 0.005 - 0.025 mm 6 table speeds: 120 - 1540 mm/min grinding spindle drive: 8 kW electrical connection: 380/400 V, 10 kW space requirement: 6100 x 2300 x 1600 mm weight: 7 tons

Condition: used, machine/vehicle number: 83040, Outreach: 150 mm Fedpfxjb Dkh Ne Ak Ujpl Test height: 200 mm Space requirement: 350 x 600 x 1410 mm

Condition: used, Load capacity: 3 t Opening width: 38 mm Fodpfx Asb Nwkxjk Ujpl Weight: 15 kg

Condition: as good as new (ex-display), Cable protection tubes, made of fiberglass, available in 4 dimensions and 6 m length. The tubes were developed and manufactured in 1995 for a new water pipe system, but unfortunately, this system did not gain acceptance. Available: Outer diameter 16, 20, 25, and 32 mm. Fpedpjb Nxc Tefx Ak Ujl

Year of construction: 1987, condition: used, Spindle height: 400 mm 12 speeds of the INTERGRENN table drill: 210 - 2580 rpm Fpodpfx Aob Nxm Dok Uol Drive motor: 380 V, 0.75 kW Space requirement: 950 x 650 x 2030 mm Weight approx.: 150 kg

Condition: used, machine/vehicle number: B.739, Outer diameter: 400 mm Fsdpfob Nzi Iox Ak Uspl Bore: 95 mm Flange width: 100 mm Short taper size: 6 Approximate weight: 52 kg